AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

129-2992 PROTECTION GP-FUEL SYSTEM S/N 03Z14639-UP 3208 ENGINE - MACHINE


FUEL SYSTEM
GOVERNOR GP
PUMP GP-FUEL PRIMING
GOVERNOR GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 03Z
 3208 Industrial Engine 03Z10093-UP SEBP2308 3208 03Z   (2018)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3607 DRIVE GP-GOVERNOR & FUEL PUMP
DRIVE GP-GOVERNOR & FUEL PUMP
9N-3607 DRIVE GP-GOVERNOR & FUEL PUMP
PROTECTION GP-FUEL SYSTEM
129-2992 PROTECTION GP-FUEL SYSTEM
PROTECTION GP-FUEL SYSTEM
147-1662 PROTECTION GP-FUEL SYSTEM
PUMP GP-GOV & FUEL INJ
105-2170 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
108-8641 PUMP GP-GOV & FUEL INJ
 

#SEBP23080360
 

129-2992: PROTECTION GP-FUEL SYSTEM

129-2992 PROTECTION GP-FUEL SYSTEM
S/N 03Z14639-UP
i00494725 SEBP2308
1292992 PROTECTION GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-7792 [1] BOLT-TAMPERPROOF  
2. 128-7795 [1] BOLT-TAMPERPROOF  
 

#SEBP23080361
 

147-1662: PROTECTION GP-FUEL SYSTEM

147-1662 PROTECTION GP-FUEL SYSTEM
S/N 03Z15446-UP
i00541190 SEBP2308
1471662 PROTECTION GP-FUEL SYSTEM Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 128-7793 [1] BOLT-TAMPERPROOF (1/4-20X1-IN)  
2. 128-7795 [1] BOLT-TAMPERPROOF  
 

#SEBP23080362
 

131-9328: PUMP GP-FUEL PRIMING

131-9328 PUMP GP-FUEL PRIMING
S/N 03Z14875-UP
i00511814 SEBP2308
1319328 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1P-0436 [2] GASKET (FUEL PRIMING PUMP)  
2. 132-9782 [1] ADAPTER-PRIMING PUMP  
3. 105-2508 [1] PUMP AS-FUEL PRIMING  
4. 229-3218 [2] VALVE AS  
5. 7L-9061 [1] SEAL-O-RING  
6. 2A-5546 [2] BOLT (1/4-20X1.375-IN)  
7. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
8. 1B-2790 [2] BOLT (5/16-18X1.375-IN)  
9. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP23080363
 

4N-4314: PUMP GP-FUEL PRIMING

4N-4314 PUMP GP-FUEL PRIMING
i00196426 SEBP2308
4N4314 PUMP GP-FUEL PRIMING Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-5514 [1] BOLT (5/16-18X1.625-IN)  
    -OR-
  1B-2790 [1] BOLT (5/16-18X1.375-IN)  
2. 9M-1974 B [2] WASHER-HARD (8.8X16X2-MM THK)  
3. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
4. 137-5541 [1] PUMP GP-FUEL PRIMING  
5. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 9F-7022 [1] BOLT (1/4-20X1.5-IN)  
    -OR-
  7B-2742 [1] BOLT (1/4-20X1.25-IN)  
  B   USE AS REQUIRED
 

#SEBP23080364
 

105-2170: PUMP GP-GOV & FUEL INJ

105-2170 PUMP GP-GOV & FUEL INJ
S/N 03Z10241-UP
PART OF 112-6655, 4P-3022 PUMP GP-GOV & FUEL INJ
i00478713 SEBP2308
1052170 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-6119 [1] SPRING (OUTER)  
2. 4N-5663 [1] SPRING (INNER)(INNER)  
3. 4N-0527 [1] SPRING  
4. 7L-8070 [2] BOLT  
5. 166-0368 [1] GASKET  
6. 7C-8928 Y [1] PUMP GP-GOV & FUEL INJ  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
15. 3L-5987 [1] COVER  
16. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
17. 6L-5773 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080365
 

108-8641: PUMP GP-GOV & FUEL INJ

108-8641 PUMP GP-GOV & FUEL INJ
S/N 03Z11859-UP
i00486736 SEBP2308
1088641 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 108-8642 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0539 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080366
 

108-8642: PUMP GP-GOV & FUEL INJ

108-8642 PUMP GP-GOV & FUEL INJ
S/N 03Z11859-UP
PART OF 108-8641 PUMP GP-GOV & FUEL INJ
i00486738 SEBP2308
1088642 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0324 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 4N-0527 [1] SPRING  
4. 166-0368 [1] GASKET  
5. 4N-5663 [1] SPRING (INNER)(INNER)  
6. 4N-6119 [1] SPRING (OUTER)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
10. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
11. 4B-2042 [1] NUT (8-32-THD)  
12. 3B-4501 [1] LOCKWASHER  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080367
 

109-0324: PUMP GP-GOV & FUEL INJ

109-0324 PUMP GP-GOV & FUEL INJ
S/N 03Z11859-UP
PART OF 108-8642, 109-0325 PUMP GP-GOV & FUEL INJ
i00487901 SEBP2308
1090324 PUMP GP-GOV & FUEL INJ Parts scheme 1090324 PUMP GP-GOV & FUEL INJ Parts scheme 1090324 PUMP GP-GOV & FUEL INJ Parts scheme 1090324 PUMP GP-GOV & FUEL INJ Parts scheme 1090324 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-0276 [8] PUMP AS-FUEL INJECTION  
    (EACH INCLUDES)
1A. 7W-8039 [1] BONNET-VALVE  
1B. 8N-1415 [1] SPRING-CHECK  
1C. 4P-3484 [1] VALVE AS-CHECK  
1D. 142-2818 [1] PUMP AS-FUEL INJECTION  
1E. 9N-5862 [1] SPRING-LIFTER  
1F. 4N-2728 [1] WASHER-RETAINING  
1G. 4N-0224 [1] RING-RETAINING  
1H. 7C-9966 [1] INSERT  
2. 6F-6672 [8] SEAL-O-RING  
3. 7W-8120 [8] BUSHING-TERMINAL  
4. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
5. 9N-5817 [8] LIFTER-PLUNGER  
6. 4N-2773 [1] SHAFT AS-CONTROL  
7. 5S-0003 [1] NUT (5/16-18-THD)  
8. 4N-2708 [1] SETSCREW  
9. 4N-0528 [1] SHAFT-LEVER  
10. 4N-9828 [1] SHAFT AS-CONTROL  
11. 4N-3922 [1] LEVER AS  
12. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
13. 9N-5820 [8] LEVER-CONTROL  
14. 126-4144 [1] LEVER-SHAFT  
15. 124-5941 [1] SHAFT-CONTROL  
16. 7C-6202 [1] LEVER  
17. 7X-2395 [2] BOLT-LOCKING  
18. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
19. 6N-4176 [1] SETSCREW  
20. 4N-0445 [1] LEVER-LOAD STOP  
21. 4N-0523 [1] DOWEL-STOP SUPPORT  
22. 2D-6392 [2] SEAL-O-RING  
23. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
24. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
25. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
26. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
27. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
28. 8N-3946 [1] HOUSING AS-GOVERNOR  
29. 4N-2333 [1] PIN-SPRING  
30. 8S-6814 [2] PIN  
31. 9L-9503 [1] DOWEL-HOLLOW  
32. 9S-4182 [1] PLUG (7/16-20-THD)  
33. 3J-7354 [1] SEAL-O-RING  
34. 8N-3945 [1] BUSHING-TERMINAL  
35. 2W-4037 [1] SEAL-LIP TYPE  
36. 128-7347 [1] LEVER AS-RISER  
37. 3H-0442 [1] SEAL-O-RING  
38. 2M-7819 [1] RING-RETAINING  
39. 6L-3921 [1] WASHER-SPECIAL  
40. 7C-6201 [1] LEVER-SEAT  
41. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
42. 3J-7354 [1] SEAL-O-RING  
43. 9S-4182 [1] PLUG (7/16-20-THD)  
44. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
45. 9S-9332 [1] FITTING-ELBOW  
46. 124-5939 [1] COVER-FUEL PUMP HOUSING  
47. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
48. 4N-0941 [1] LEVER-LIMITER  
49. 4N-0505 [1] GASKET-HOUSING  
50. 128-2974 [1] HOUSING AS (SHUT-OFF)  
51. 4N-3713 [1] SEAL-LIP TYPE  
52. 132-2117 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
53. 9N-5821 [2] DEFLECTOR-PULSE  
54. 4N-1826 [2] DOWEL  
55. 2D-6392 [2] SEAL-O-RING  
56. 5P-4810 [1] BEARING  
57. 8N-0628 [1] BEARING  
58. 4N-2333 [1] PIN-SPRING  
59. 8N-0984 [8] PIN-SPRING  
60. 127-7139 [1] GASKET-TOP COVER  
61. 1P-4001 [1] FITTING  
62. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
63. 4N-0532 [1] GASKET-COVER  
64. 4N-0531 [1] COVER-IDLE SCREW  
65. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
66. 170-5705 [1] SHAFT-SHUTOFF  
67. 4N-0940 [1] LEVER-SHUTOFF  
68. 124-5942 [1] SHAFT-SOLENOID  
69. 9Y-0546 [1] FLANGE AS  
70. 2M-5471 [2] BOLT  
71. 4N-0975 [1] GASKET-CHECK VALVE  
72. 6N-1716 [1] VALVE AS  
73. 3J-7354 [1] SEAL-O-RING  
74. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
75. 4N-2954 [1] SLEEVE-CAMSHAFT  
76. 4N-1132 [1] BODY AS-TRANSFER PUMP  
77. 8S-6814 [1] PIN  
78. 4N-1584 [1] SEAL-LIP TYPE  
79. 4N-0636 [1] SEAL-LIP TYPE  
80. 8H-9804 [1] SHAFT-PUMP IDLER  
81. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
82. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
83. 5M-6509 [1] SEAL-O-RING  
84. 4N-1767 [1] VALVE-BYPASS  
85. 4N-0605 [1] SPRING  
86. 4N-4276 [1] SEAT-SPRING  
87. 4N-6408 [1] PISTON AS  
88. 4N-6406 [1] RING-SPACER  
89. 4N-6404 [1] RING-RETAINING  
90. 4N-6407 [1] SPOOL-DASHPOT  
91. 6N-2517 [1] SPRING-DASHPOT  
92. 2W-8623 [1] SEAT-SPRING  
93. 4N-0434 [1] RISER-GOVERNOR  
94. 4N-2927 [2] RACE-THRUST BEARING  
  7M-7219 [1] BEARING-THRUST  
95. 4N-2953 [1] RING-LOCK  
96. 4N-3779 [1] KEY-CAMSHAFT  
97. 7W-6827 [1] CAMSHAFT AS  
98. 8N-2663 [1] CARRIER-WEIGHT  
99. 8N-2662 [1] BOLT-SOCKET HEAD  
100. 4N-1723 [1] SHIELD-CARRIER  
101. 4N-0425 [1] WEIGHT-GOVERNOR  
102. 4N-0511 [1] DOWEL  
103. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
104. 4N-9019 [1] DOWEL  
105. 9N-5822 [1] WASHER-THRUST  
 

#SEBP23080368
 

109-0325: PUMP GP-GOV & FUEL INJ

109-0325 PUMP GP-GOV & FUEL INJ
S/N 03Z11859-UP
PART OF 109-0326 PUMP GP-GOV & FUEL INJ
i00487903 SEBP2308
1090325 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-0324 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 166-0368 [1] GASKET  
4. 4N-0527 [1] SPRING  
5. 4N-9226 [1] SPRING (OUTER)  
6. 4N-5663 [1] SPRING (INNER)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080369
 

109-0326: PUMP GP-GOV & FUEL INJ

109-0326 PUMP GP-GOV & FUEL INJ
S/N 03Z11859-UP
i00487905 SEBP2308
1090326 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Governor & Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve & Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

LINES GP-FUEL INJECTION
9Y-0301 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-0300 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-0299 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9Y-0298 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
9N-3880 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
7W-1998 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
133-8987 LINES GP-FUEL INJECTION
LINES GP-FUEL INJECTION
121-4694 LINES GP-FUEL INJECTION
PROTECTION GP-FUEL SYSTEM
147-1662 PROTECTION GP-FUEL SYSTEM
PUMP GP-FUEL PRIMING
131-9328 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
PUMP GP-GOV & FUEL INJ
105-2170 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
108-8641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
108-8642 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0324 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0325 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.