AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

109-0708 PUMP GP-GOV & FUEL INJ S/N 03Z11963-UP 3208 ENGINE - MACHINE


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 03Z
 3208 Industrial Engine 03Z10093-UP SEBP2308 3208 03Z   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
109-0325 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0326 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0708 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0711 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
112-6655 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
114-0957 PUMP GP-GOV & FUEL INJ
 

#SEBP23080370
 

109-0708: PUMP GP-GOV & FUEL INJ

109-0708 PUMP GP-GOV & FUEL INJ
S/N 03Z11963-UP
i00488211 SEBP2308
1090708 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080371
 

109-0711: PUMP GP-GOV & FUEL INJ

109-0711 PUMP GP-GOV & FUEL INJ
S/N 03Z11963-UP
PART OF 109-0708 PUMP GP-GOV & FUEL INJ
i00488214 SEBP2308
1090711 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7726 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 166-0368 [1] GASKET  
4. 4N-0527 [1] SPRING  
5. 4N-5661 [1] SPRING (OUTER)  
6. 4N-5663 [1] SPRING (INNER)(INNER)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080372
 

112-6655: PUMP GP-GOV & FUEL INJ

112-6655 PUMP GP-GOV & FUEL INJ
S/N 03Z12527-UP
i00492584 SEBP2308
1126655 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
2. 6N-0640 Y [1] TORQUE CONTROL GP  
3. 4N-0443 [1] PIN-LOAD STOP  
4. 105-2170 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080373
 

114-0957: PUMP GP-GOV & FUEL INJ

114-0957 PUMP GP-GOV & FUEL INJ
S/N 03Z12506-UP
PART OF 114-0960 PUMP GP-GOV & FUEL INJ
i00482671 SEBP2308
1140957 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7726 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 166-0368 [1] GASKET  
4. 4N-0527 [1] SPRING  
5. 4N-5661 [1] SPRING  
6. 4N-5663 [1] SPRING (INNER)(INNER)  
7. 165-6475 [1] COVER  
8. 6N-0412 [1] SCREW AS-MACHINE  
9. 4B-2042 [1] NUT (8-32-THD)  
10. 3B-4501 [1] LOCKWASHER  
11. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
12. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
13. 3K-8460 [1] PLUG (1/2-20-THD)  
14. 1J-9671 [1] SEAL-O-RING  
15. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
16. 3L-5987 [1] COVER  
17. 6L-5773 [1] GASKET  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080374
 

114-0960: PUMP GP-GOV & FUEL INJ

114-0960 PUMP GP-GOV & FUEL INJ
S/N 03Z12506-UP
i00482675 SEBP2308
1140960 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
2. 6N-0509 Y [1] TORQUE CONTROL GP  
3. 4N-0443 [1] PIN-LOAD STOP  
4. 114-0957 Y [1] PUMP GP-GOV & FUEL INJ  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080375
 

122-1925: PUMP GP-GOV & FUEL INJ

122-1925 PUMP GP-GOV & FUEL INJ
S/N 03Z13692-UP
FIELD REPLACEMENT ORDER @@@@@ 7C-8972@@@@@
i00519075 SEBP2308
1221925 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-3988 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 6N-0509 Y [1] TORQUE CONTROL GP  
4. 4N-0443 [1] PIN-LOAD STOP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080376
 

122-9000: PUMP GP-GOV & FUEL INJ

122-9000 PUMP GP-GOV & FUEL INJ
S/N 03Z13990-15079
i00512944 SEBP2308
1229000 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9001 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080377
 

122-9001: PUMP GP-GOV & FUEL INJ

122-9001 PUMP GP-GOV & FUEL INJ
S/N 03Z13990-UP
PART OF 122-9000, 126-1042 PUMP GP-GOV & FUEL INJ
i00512945 SEBP2308
1229001 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9002 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 134-3857 [1] COVER AS-TORQUE SPRING  
4. 4N-0527 [1] SPRING  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 4N-5663 [1] SPRING (INNER)  
7. 4N-9226 [1] SPRING (OUTER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080378
 

122-9002: PUMP GP-GOV & FUEL INJ

122-9002 PUMP GP-GOV & FUEL INJ
S/N 03Z13990-UP
PART OF 122-9001, 130-4745 PUMP GP-GOV & FUEL INJ
i00512948 SEBP2308
1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme 1229002 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8120 [8] BUSHING-TERMINAL  
2. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
3. 9N-5817 [8] LIFTER-PLUNGER  
4. 6F-6672 [8] SEAL-O-RING  
5. 9Y-0546 [1] FLANGE AS  
6. 7E-5346 [1] VALVE AS  
7. 4N-0975 [1] GASKET-CHECK VALVE  
8. 6N-1716 [1] VALVE AS  
9. 3J-7354 [1] SEAL-O-RING  
10. 2M-5471 [2] BOLT  
11. 122-9005 [1] PUMP AS-FUEL INJECTION  
12. 7W-8039 [1] BONNET-VALVE  
13. 4N-0224 [1] RING-RETAINING  
14. 1W-6987 [1] VALVE AS-CHECK  
15. 7C-9966 [1] INSERT  
16. 8N-1415 [1] SPRING-CHECK  
16A. 142-2815 [1] PUMP AS-FUEL INJECTION  
17. 4N-2728 [1] WASHER-RETAINING  
18. 9N-5862 [1] SPRING-LIFTER  
19. 4N-2773 [1] SHAFT AS-CONTROL  
20. 5S-0003 [2] NUT (5/16-18-THD)  
21. 4N-2708 [1] SETSCREW  
22. 4N-0528 [1] SHAFT-LEVER  
23. 4N-9828 [1] SHAFT AS-CONTROL  
24. 4N-3922 [1] LEVER AS  
25. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
26. 9N-5820 [8] LEVER-CONTROL  
27. 126-4144 [1] LEVER-SHAFT  
28. 124-5941 [1] SHAFT-CONTROL  
29. 7C-6201 [1] LEVER-SEAT  
30. 7C-6202 [1] LEVER  
31. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
32. 6N-4176 [1] SETSCREW  
33. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
34. 4N-0523 [1] DOWEL-STOP SUPPORT  
36. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
37. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
38. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
39. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
40. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
41. 8N-3946 [1] HOUSING AS-GOVERNOR  
42. 4N-2333 [1] PIN-SPRING  
43. 8S-6814 [2] PIN  
44. 9Y-4966 [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
45. 9S-4182 [1] PLUG (7/16-20-THD)  
46. 3J-7354 [1] SEAL-O-RING  
47. 8N-3945 [1] BUSHING-TERMINAL  
48. 2W-4037 [1] SEAL-LIP TYPE  
49. 7X-2395 [1] BOLT-LOCKING  
50. 3H-0442 [1] SEAL-O-RING  
51. 128-7347 [1] LEVER AS-RISER  
52. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
53. 3J-7354 [1] SEAL-O-RING  
54. 9S-4182 [1] PLUG (7/16-20-THD)  
55. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
56. 9S-9332 [1] FITTING-ELBOW  
57. 124-5939 [1] COVER-FUEL PUMP HOUSING  
58. 6D-3031 [1] SCREW-SOCKET HEAD (8-32X0.375-IN)  
59. 4N-0941 [1] LEVER-LIMITER  
60. 4N-0505 [1] GASKET-HOUSING  
61. 128-2974 [1] HOUSING AS  
  4N-3713 [1] SEAL-LIP TYPE  
63. 132-2117 [1] HOUSING AS-PUMP  
64. 9N-5821 [2] DEFLECTOR-PULSE  
65. 4N-1826 [2] DOWEL  
66. 2D-6392 [2] SEAL-O-RING  
67. 4N-2333 [1] PIN-SPRING  
68. 8N-0984 [8] PIN-SPRING  
69. 4N-5481 [1] STUD  
70. 9S-4180 [1] PLUG  
71. 4J-7533 [1] SEAL-O-RING  
72. 4N-0940 [1] LEVER-SHUTOFF  
73. 124-5942 [1] SHAFT-SOLENOID  
74. 4N-0532 [1] GASKET-COVER  
75. 4N-0531 [1] COVER-IDLE SCREW  
76. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
77. 4N-0938 [1] SHAFT-LEVER  
78. 127-7139 [1] GASKET-TOP COVER  
79. 1P-4001 [1] FITTING  
80. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
81. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
82. 4N-2954 [1] SLEEVE-CAMSHAFT  
83. 4N-1132 [1] BODY AS-TRANSFER PUMP  
84. 8S-6814 [1] PIN  
85. 4N-1584 [1] SEAL-LIP TYPE  
86. 4N-0636 [1] SEAL-LIP TYPE  
87. 8H-9804 [1] SHAFT-PUMP IDLER  
88. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
89. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
90. 5M-6509 [1] SEAL-O-RING  
91. 4N-1767 [1] VALVE-BYPASS  
92. 4N-0605 [1] SPRING  
93. 4N-4276 [1] SEAT-SPRING  
94. 4N-6408 [1] PISTON AS  
95. 4N-6406 [1] RING-SPACER  
96. 4N-6404 [1] RING-RETAINING  
97. 4N-6407 [1] SPOOL-DASHPOT  
98. 6N-2517 [1] SPRING-DASHPOT  
99. 2W-8623 [1] SEAT-SPRING  
100. 4N-0434 [1] RISER-GOVERNOR  
101. 4N-2927 [2] RACE-THRUST BEARING  
102. 4N-2953 [1] RING-LOCK  
103. 4N-3779 [1] KEY-CAMSHAFT  
104. 122-9003 [1] CAMSHAFT AS  
105. 8N-2663 [1] CARRIER-WEIGHT  
106. 8N-2662 [3] BOLT-SOCKET HEAD  
107. 4N-1723 [1] SHIELD-CARRIER  
108. 4N-0425 [3] WEIGHT-GOVERNOR  
109. 4N-0511 [3] DOWEL  
110. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
111. 4N-9019 [1] DOWEL  
112. 9N-5822 [1] WASHER-THRUST  
113. 7M-7219 [1] BEARING-THRUST  
 

#SEBP23080379
 

126-1042: PUMP GP-GOV & FUEL INJ

126-1042 PUMP GP-GOV & FUEL INJ
S/N 03Z14639-15079
i00513324 SEBP2308
1261042 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9001 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Governor & Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve & Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
109-0326 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0325 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
109-0324 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
108-8642 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
108-8641 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
105-2170 PUMP GP-GOV & FUEL INJ
PUMP GP-FUEL PRIMING
4N-4314 PUMP GP-FUEL PRIMING
PUMP GP-FUEL PRIMING
131-9328 PUMP GP-FUEL PRIMING
PUMP GP-GOV & FUEL INJ
109-0711 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
112-6655 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
114-0957 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
114-0960 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-1925 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9000 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9001 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9002 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.