AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

130-4744 PUMP GP-GOV & FUEL INJ S/N 03Z13990-15079 3208 ENGINE - MACHINE


FUEL SYSTEM
GOVERNOR GP

ENGINE - MACHINE 3208 ENGINE - MACHINE 03Z
 3208 Industrial Engine 03Z10093-UP SEBP2308 3208 03Z   (2018)

FUEL SYSTEM

GOVERNOR GP
PUMP GP-GOV & FUEL INJ
122-9002 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
126-1042 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
130-4744 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
130-4745 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
132-3521 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
133-8985 PUMP GP-GOV & FUEL INJ
 

#SEBP23080380
 

130-4744: PUMP GP-GOV & FUEL INJ

130-4744 PUMP GP-GOV & FUEL INJ
S/N 03Z13990-15079
i00502030 SEBP2308
1304744 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-4745 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 9N-6055 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080381
 

130-4745: PUMP GP-GOV & FUEL INJ

130-4745 PUMP GP-GOV & FUEL INJ
S/N 03Z13990-15079
PART OF 130-4744 PUMP GP-GOV & FUEL INJ
i00502031 SEBP2308
1304745 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 122-9002 Y [1] PUMP GP-GOV & FUEL INJ  
2. 7L-8070 [2] BOLT  
3. 134-3857 [1] COVER AS-TORQUE SPRING  
4. 4N-0527 [1] SPRING  
5. 117-0287 [1] GASKET-TORQUE SPRING COVER  
6. 4N-5663 [1] SPRING (INNER)  
7. 9L-6508 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080382
 

132-3521: PUMP GP-GOV & FUEL INJ

132-3521 PUMP GP-GOV & FUEL INJ
S/N 03Z15080-UP
i00495276 SEBP2308
1323521 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-4637 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 148-4528 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
6. 115-3455 [1] VALVE-BYPASS  
7. 4N-0605 [1] SPRING  
8. 166-0396 [1] COVER  
8A. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
8B. 3B-4501 [1] LOCKWASHER (NO.8)  
8C. 4B-2042 [1] NUT (8-32-THD)  
8D. 6N-0412 [1] SCREW AS-MACHINE  
8E. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 166-0397 [1] GASKET  
10. 7L-8070 [2] BOLT  
11. 4N-5663 [1] SPRING (INNER)  
12. 4N-0527 [1] SPRING  
13. 9L-6508 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080383
 

133-8985: PUMP GP-GOV & FUEL INJ

133-8985 PUMP GP-GOV & FUEL INJ
S/N 03Z14875-15445
PART OF 133-8986 PUMP GP-GOV & FUEL INJ
i00505385 SEBP2308
1338985 PUMP GP-GOV & FUEL INJ Parts scheme 1338985 PUMP GP-GOV & FUEL INJ Parts scheme 1338985 PUMP GP-GOV & FUEL INJ Parts scheme 1338985 PUMP GP-GOV & FUEL INJ Parts scheme 1338985 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8984 [8] PUMP AS-FUEL  
    (EACH INCLUDES)
  142-2812 [1] PUMP AS-FUEL INJECTION  
2. 9N-5862 [1] SPRING-LIFTER  
3. 4N-2728 [1] WASHER-RETAINING  
4. 7W-8039 [1] BONNET-VALVE  
  8N-1415 [1] SPRING-CHECK  
  1W-6987 [1] VALVE AS-CHECK  
  7C-9966 [1] INSERT  
5. 4N-0224 [1] RING-RETAINING  
6. 7W-8120 [8] BUSHING-TERMINAL  
7. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
8. 9N-5817 [8] LIFTER-PLUNGER  
9. 6F-6672 [8] SEAL-O-RING  
10. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
11. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
12. 127-2300 [1] GASKET-FLANGE  
13. 124-1526 [1] FLANGE AS  
14. 7E-5346 [1] VALVE AS  
15. 4N-2773 [1] SHAFT AS-CONTROL  
16. 5S-0003 [1] NUT (5/16-18-THD)  
17. 4N-2708 [1] SETSCREW  
18. 4N-0528 [1] SHAFT-LEVER  
19. 124-5936 [1] SHAFT AS-CONTROL  
20. 4N-3922 [1] LEVER AS  
21. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
22. 124-5932 [4] LEVER AS-CONTROL  
23. 126-4144 [1] LEVER-SHAFT  
24. 124-5941 [1] SHAFT-CONTROL  
25. 7C-6201 [1] LEVER-SEAT  
26. 7C-6202 [1] LEVER  
27. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
  6L-3921 [1] WASHER-SPECIAL  
28. 6N-4176 [1] SETSCREW  
29. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
30. 4N-0523 [1] DOWEL-STOP SUPPORT  
31. 2D-6392 [4] SEAL-O-RING  
32. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
33. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
34. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
35. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
36. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
37. 8N-3946 [1] HOUSING AS-GOVERNOR  
38. 4N-2333 [1] PIN-SPRING  
39. 8S-6814 [2] PIN  
40. 9Y-4966 [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
41. 9S-4182 [1] PLUG (7/16-20-THD)  
42. 3J-7354 [1] SEAL-O-RING  
43. 8N-3945 [1] BUSHING-TERMINAL  
44. 2W-4037 [1] SEAL-LIP TYPE  
45. 7X-2395 [1] BOLT-LOCKING  
46. 3H-0442 [1] SEAL-O-RING  
47. 128-7347 [1] LEVER AS-RISER  
48. 4N-1826 [2] DOWEL  
49. 124-5940 [1] LEVER  
50. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
51. 3J-7354 [2] SEAL-O-RING  
52. 9S-4182 [2] PLUG (7/16-20-THD)  
53. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
54. 9S-9332 [1] FITTING-ELBOW  
55. 124-5939 [1] COVER-FUEL PUMP HOUSING  
56. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
57. 4N-0941 [1] LEVER-LIMITER  
58. 4N-0505 [1] GASKET-HOUSING  
59. 128-2974 [1] HOUSING AS (SHUT-OFF)  
  4N-3713 [1] SEAL-LIP TYPE  
60. 127-7139 [1] GASKET-TOP COVER  
61. 126-7881 [1] HOUSING AS-PUMP  
  9S-4180 [1] PLUG  
  4J-7533 [1] SEAL-O-RING  
  6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
  140-0083 [2] DEFLECTOR-SPILL (LH/RH)  
  140-0084 [2] DEFLECTOR-SPILL (RH/LH)  
  147-4531 [4] BOLT-SOCKET HEAD (10-24X0.37-IN)  
62. 3H-0703 [1] DOWEL  
63. 8N-0984 [8] PIN-SPRING  
64. 4N-5481 [1] STUD  
65. 4N-0531 [1] COVER-IDLE SCREW  
66. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
67. 4N-0938 [1] SHAFT-LEVER  
68. 4N-0940 [1] LEVER-SHUTOFF  
69. 124-5942 [1] SHAFT-SOLENOID  
70. 1P-4001 [1] FITTING  
71. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
72. 4N-0532 [1] GASKET-COVER  
73. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
74. 4N-2954 [1] SLEEVE-CAMSHAFT  
75. 4N-1132 [1] BODY AS-TRANSFER PUMP  
76. 8S-6814 [1] PIN  
77. 4N-1584 [1] SEAL-LIP TYPE  
78. 4N-0636 [1] SEAL-LIP TYPE  
79. 8H-9804 [1] SHAFT-PUMP IDLER  
80. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
81. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
82. 5M-6509 [1] SEAL-O-RING  
83. 4N-4276 [1] SEAT-SPRING  
84. 4N-6408 [1] PISTON AS  
85. 4N-6406 [1] RING-SPACER  
86. 4N-6404 [1] RING-RETAINING  
87. 4N-6407 [1] SPOOL-DASHPOT  
88. 6N-2517 [1] SPRING-DASHPOT  
89. 2W-8623 [1] SEAT-SPRING  
90. 4N-0434 [1] RISER-GOVERNOR  
91. 4N-2927 [2] RACE-THRUST BEARING  
  7M-7219 [1] BEARING-THRUST  
92. 4N-2953 [1] RING-LOCK  
93. 4N-3779 [1] KEY-CAMSHAFT  
94. 134-8102 [1] CAMSHAFT AS  
95. 8N-2663 [1] CARRIER-WEIGHT  
96. 8N-2662 [3] BOLT-SOCKET HEAD  
97. 4N-1723 [1] SHIELD-CARRIER  
98. 4N-0425 [3] WEIGHT-GOVERNOR  
99. 4N-0511 [3] DOWEL  
100. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
101. 4N-9019 [1] DOWEL  
102. 9N-5822 [1] WASHER-THRUST  
 

#SEBP23080384
 

133-8986: PUMP GP-GOV & FUEL INJ

133-8986 PUMP GP-GOV & FUEL INJ
S/N 03Z14875-15445
i00505400 SEBP2308
1338986 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8985 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 133-8988 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
6. 4N-0527 [1] SPRING  
7. 4N-0605 [1] SPRING  
8. 4N-9226 [1] SPRING (OUTER)  
9. 117-0287 [1] GASKET-TORQUE SPRING COVER  
10. 7L-8070 [2] BOLT  
11. 4N-5663 [1] SPRING (INNER)  
12. 116-4820 [1] COVER AS-TORQUE SPRING  
13. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
14. 3B-4501 [1] LOCKWASHER  
15. 4B-2042 [1] NUT (8-32-THD)  
16. 6N-0412 [1] SCREW AS-MACHINE  
17. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080385
 

136-4636: PUMP GP-GOV & FUEL INJ

136-4636 PUMP GP-GOV & FUEL INJ
S/N 03Z15080-UP
i00502614 SEBP2308
1364636 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-4637 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 148-4528 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
6. 115-3455 [1] VALVE-BYPASS  
7. 4N-0605 [1] SPRING  
8A. 166-0396 [1] COVER  
8B. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
8C. 3B-4501 [1] LOCKWASHER  
8D. 4B-2042 [1] NUT (8-32-THD)  
8E. 6N-0412 [1] SCREW AS-MACHINE  
8F. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 166-0397 [1] GASKET  
10. 7L-8070 [2] BOLT  
11. 4N-5663 [1] SPRING (INNER)  
12. 4N-0527 [1] SPRING  
13. 4N-9226 [1] SPRING (OUTER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080386
 

136-4637: PUMP GP-GOV & FUEL INJ

136-4637 PUMP GP-GOV & FUEL INJ
S/N 03Z15080-UP
PART OF 132-3521, 136-4636 PUMP GP-GOV & FUEL INJ
i00502616 SEBP2308
1364637 PUMP GP-GOV & FUEL INJ Parts scheme 1364637 PUMP GP-GOV & FUEL INJ Parts scheme 1364637 PUMP GP-GOV & FUEL INJ Parts scheme 1364637 PUMP GP-GOV & FUEL INJ Parts scheme 1364637 PUMP GP-GOV & FUEL INJ Parts scheme 1364637 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 126-7881 [1] HOUSING AS-PUMP  
2. 4N-5481 [1] STUD  
3. 4J-7533 [1] SEAL-O-RING  
4. 3H-0703 [1] DOWEL  
5. 9S-4180 [1] PLUG  
6. 8N-0984 [8] PIN-SPRING  
7. 140-0084 [2] DEFLECTOR-SPILL  
8. 147-4531 [4] BOLT-SOCKET HEAD (10-24X0.37-IN)  
9. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
10. 140-0083 [2] DEFLECTOR-SPILL  
11. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
12. 8N-3946 [1] HOUSING AS-GOVERNOR  
13. 3J-7354 [1] SEAL-O-RING  
14. 4N-2333 [1] PIN-SPRING  
15. 8N-3945 [1] BUSHING-TERMINAL  
16. 8S-6814 [2] PIN  
17. 9S-4182 [1] PLUG (7/16-20-THD)  
18. 9Y-4966 [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
19. 147-5530 [1] SEAL-LIP TYPE  
20. 163-1856 [1] FLANGE AS  
21. 7E-5346 [1] VALVE AS  
22. 127-2300 [1] GASKET-FLANGE  
23. 4N-2954 [1] SLEEVE-CAMSHAFT  
24. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
25. 1P-4001 [1] FITTING  
26. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
27. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
28. 2D-6392 [4] SEAL-O-RING  
29. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
30. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
31. 4N-2773 [1] SHAFT AS-CONTROL  
32. 6N-4176 [1] SETSCREW  
33. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
34. 6L-3921 [1] WASHER-SPECIAL  
35. 4N-0532 [1] GASKET-COVER  
36. 124-5939 [1] COVER-FUEL PUMP HOUSING  
37. 127-7139 [1] GASKET-TOP COVER  
38. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
39. 4N-2708 [1] SETSCREW  
40. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
41. 4N-0531 [1] COVER-IDLE SCREW  
42. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
43. 2M-5471 [1] BOLT  
44. 124-5942 [1] SHAFT-SOLENOID  
45. 4N-0940 [1] LEVER-SHUTOFF  
46. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
47. 4N-1826 [2] DOWEL  
48. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
49. 126-4144 [1] LEVER-SHAFT  
50. 124-5941 [1] SHAFT-CONTROL  
51A. 7W-8039 [1] BONNET-VALVE  
51B. 8N-1415 [1] SPRING-CHECK  
51C. 1W-6987 [1] VALVE AS-CHECK  
51D. 7C-9966 [1] INSERT  
51E. 4N-0224 [1] RING-RETAINING  
51F. 142-2815 [1] PUMP AS-FUEL INJECTION  
51G. 4N-2728 [1] WASHER-RETAINING  
51H. 9N-5862 [1] SPRING-LIFTER  
52. 7W-8120 [8] BUSHING-TERMINAL  
53. 6F-6672 [8] SEAL-O-RING  
54. 9N-5817 [8] LIFTER-PLUNGER  
55. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
56. 9N-5820 [8] LEVER-CONTROL  
57. 4N-0941 [1] LEVER-LIMITER  
58. 5M-6509 [1] SEAL-O-RING  
59. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
60. 4N-1132 [1] BODY AS-TRANSFER PUMP  
61. 4N-0636 [1] SEAL-LIP TYPE  
62. 4N-1584 [1] SEAL-LIP TYPE  
63. 8H-9804 [1] SHAFT-PUMP IDLER  
64. 8S-6814 [1] PIN  
65. 4N-3779 [1] KEY-CAMSHAFT  
66. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
67. 122-9004 [1] CAMSHAFT-PUMP  
68. 4N-0425 [3] WEIGHT-GOVERNOR  
69. 4N-0511 [3] DOWEL  
70. 4N-1723 [1] SHIELD-CARRIER  
71. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
72. 4N-9019 [1] DOWEL  
73. 8N-2662 [3] BOLT-SOCKET HEAD  
74. 8N-2663 [1] CARRIER-WEIGHT  
75. 9N-5822 [1] WASHER-THRUST  
76. 4N-2953 [1] RING-LOCK  
77. 4N-2927 [2] RACE-THRUST BEARING  
78. 4N-0434 [1] RISER-GOVERNOR  
79. 2W-8623 [1] SEAT-SPRING  
80. 6N-2517 [1] SPRING-DASHPOT  
81. 4N-4276 [1] SEAT-SPRING  
82. 4N-6408 [1] PISTON AS  
83. 4N-6404 [1] RING-RETAINING  
84. 4N-6406 [1] RING-SPACER  
85. 4N-6407 [1] SPOOL-DASHPOT  
86. 7C-6201 [1] LEVER-SEAT  
87. 7C-6202 [1] LEVER  
88. 4N-0505 [1] GASKET-HOUSING  
89. 3J-7354 [2] SEAL-O-RING  
90. 4N-0528 [1] SHAFT-LEVER  
91. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
92. 128-7347 [1] LEVER AS-RISER  
93. 4N-9828 [1] SHAFT AS-CONTROL  
  [1] SPRING  
94. 3H-0442 [1] SEAL-O-RING  
95. 4N-0523 [1] DOWEL-STOP SUPPORT  
96. 9S-9332 [1] FITTING-ELBOW  
97. 7X-2395 [1] BOLT-LOCKING  
98. 128-2974 [1] HOUSING AS  
98A. 147-5531 [1] SEAL-LIP TYPE  
99. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
100. 9S-4182 [2] PLUG (7/16-20-THD)  
101. 5S-0003 [1] NUT (5/16-18-THD)  
102. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
103. 170-5705 [1] SHAFT-SHUTOFF  
105. 4N-3922 [1] LEVER AS  
106. 7M-7219 [1] BEARING-THRUST  
 

#SEBP23080387
 

136-7058: PUMP GP-GOV & FUEL INJ

136-7058 PUMP GP-GOV & FUEL INJ
S/N 03Z15201-UP
18 DEG
i00503306 SEBP2308
1367058 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7059 Y [1] PUMP GP-GOV & FUEL INJ  
2. 9N-0683 Y [1] SHUTOFF GP-ELECTRICAL  
3. 133-8988 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
6. 115-3455 [1] VALVE-BYPASS  
7. 4N-0605 [1] SPRING  
8. 166-0396 [1] COVER  
8A. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
8B. 3B-4501 [1] LOCKWASHER  
8C. 4B-2042 [1] NUT (8-32-THD)  
8D. 6N-0412 [1] SCREW AS-MACHINE  
8E. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 166-0397 [1] GASKET  
10. 7L-8070 [2] BOLT  
11. 4N-5663 [1] SPRING (INNER)  
12. 4N-0527 [1] SPRING  
13. 4N-9226 [1] SPRING (OUTER)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23080388
 

136-7059: PUMP GP-GOV & FUEL INJ

136-7059 PUMP GP-GOV & FUEL INJ
S/N 03Z15201-UP
18 DEG
PART OF 136-7058, 144-3519, 144-3520 PUMP GP-GOV & FUEL INJ
i00503317 SEBP2308
1367059 PUMP GP-GOV & FUEL INJ Parts scheme 1367059 PUMP GP-GOV & FUEL INJ Parts scheme 1367059 PUMP GP-GOV & FUEL INJ Parts scheme 1367059 PUMP GP-GOV & FUEL INJ Parts scheme 1367059 PUMP GP-GOV & FUEL INJ Parts scheme 1367059 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8120 [8] BUSHING-TERMINAL  
2. 9N-5827 [8] ROLLER-FUEL PUMP LIFT  
3. 9N-5817 [8] LIFTER-PLUNGER  
4. 6F-6672 [8] SEAL-O-RING  
5. 163-1856 [1] FLANGE AS  
6. 7E-5346 [1] VALVE AS  
7. 127-2300 [1] GASKET-FLANGE  
8. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
9. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
10. 133-8984 [8] PUMP AS-FUEL  
    (EACH INCLUDES)
10A. 142-2812 PUMP AS-FUEL INJECTION  
11. 4N-2728 [1] WASHER-RETAINING  
12. 9N-5862 [1] SPRING-LIFTER  
13. 1W-6987 [1] VALVE AS-CHECK  
14. 7C-9966 [1] INSERT  
15. 8N-1415 [1] SPRING-CHECK  
16. 7W-8039 [1] BONNET-VALVE  
17. 4N-0224 [1] RING-RETAINING  
18. 4N-2773 [1] SHAFT AS-CONTROL  
19. 5S-0003 [1] NUT (5/16-18-THD)  
20. 4N-2708 [1] SETSCREW  
21. 4N-0528 [1] SHAFT-LEVER  
22. 124-5936 [1] SHAFT AS-CONTROL  
23. 4N-3922 [1] LEVER AS  
24. 2N-2658 [10] BOLT-SOCKET HEAD (8-32X15.88-MM)  
25. 124-5932 [4] LEVER AS-CONTROL  
26. 126-4144 [1] LEVER-SHAFT  
27. 124-5941 [1] SHAFT-CONTROL  
28. 7C-6201 [1] LEVER-SEAT  
29. 7C-6202 [1] LEVER  
30. 6F-0612 [1] NUT-JAM (1/4-28-THD)  
31. 6N-4176 [1] SETSCREW  
32. 4N-0445 [1] LEVER-LOAD STOP  
  2M-7819 [1] RING-RETAINING  
33. 4N-0523 [1] DOWEL-STOP SUPPORT  
34. 2D-6392 [4] SEAL-O-RING  
35. 4N-3329 [2] WASHER (16.25X25.65X0.79-MM)  
36. 6N-7523 [1] WASHER (6.48X11.9X1.57-MM THK)  
37. 8F-8178 [1] BOLT (1/4-20X3.25-IN)  
38. 1D-4533 [3] BOLT (1/4-20X2.25-IN)  
39. 2A-4781 [3] BOLT (1/4-20X2.75-IN)  
40. 8N-3946 [1] HOUSING AS-GOVERNOR  
41. 4N-2333 [1] PIN-SPRING  
42. 8S-6814 [2] PIN  
43. 9Y-4966 [1] VALVE AS-RELIEF  
  2D-6392 [1] SEAL-O-RING  
44. 9S-4182 [1] PLUG (7/16-20-THD)  
45. 3J-7354 [1] SEAL-O-RING  
46. 8N-3945 [1] BUSHING-TERMINAL  
47. 147-5530 [1] SEAL-LIP TYPE  
48. 7X-2395 [1] BOLT-LOCKING  
49. 3H-0442 [1] SEAL-O-RING  
50. 128-7347 [1] LEVER AS-RISER  
51. 6L-3921 [1] WASHER-SPECIAL  
52. 124-5940 [1] LEVER  
53. 4N-1826 [2] DOWEL  
54. 0S-1615 [7] BOLT (1/4-20X0.75-IN)  
55. 3J-7354 [1] SEAL-O-RING  
56. 9S-4182 [1] PLUG (7/16-20-THD)  
57. 8H-3127 [2] BOLT (1/4-20X0.75-IN)  
58. 9S-9332 [1] FITTING-ELBOW  
59. 124-5939 [1] COVER-FUEL PUMP HOUSING  
60. 6D-3031 [4] SCREW-SOCKET HEAD (8-32X0.375-IN)  
61. 4N-0941 [1] LEVER-LIMITER  
62. 4N-0505 [1] GASKET-HOUSING  
63. 128-2974 [1] HOUSING AS  
  4N-3713 [1] SEAL-LIP TYPE  
64. 127-7139 [1] GASKET-TOP COVER  
65. 1P-4001 [1] FITTING  
66. 4N-0556 [1] GASKET-GOVERNOR HOUSING  
67. 4N-0532 [1] GASKET-COVER  
71. 4N-0531 [1] COVER-IDLE SCREW  
72. 6L-1756 [2] BOLT (1/4-20X1.5-IN)  
73. 170-5705 [1] SHAFT-SHUTOFF  
74. 4N-0940 [1] LEVER-SHUTOFF  
75. 124-5942 [1] SHAFT-SOLENOID  
76. 9F-6641 [4] BOLT (5/16-18X1.25-IN)  
77. 4N-2954 [1] SLEEVE-CAMSHAFT  
78. 4N-1132 [1] BODY AS-TRANSFER PUMP  
79. 8S-6814 [1] PIN  
80. 4N-1584 [1] SEAL-LIP TYPE  
81. 4N-0636 [1] SEAL-LIP TYPE  
82. 8H-9804 [1] SHAFT-PUMP IDLER  
83. 4N-0429 [1] GEAR-PUMP (15-TEETH)  
84. 4N-0406 [1] GEAR-PUMP (10-TEETH)  
85. 5M-6509 [1] SEAL-O-RING  
86. 4N-4276 [1] SEAT-SPRING  
87. 4N-6408 [1] PISTON AS  
88. 4N-6406 [1] RING-SPACER  
89. 4N-6404 [1] RING-RETAINING  
90. 4N-6407 [1] SPOOL-DASHPOT  
91. 6N-2517 [1] SPRING-DASHPOT  
92. 2W-8623 [1] SEAT-SPRING  
93. 4N-0434 [1] RISER-GOVERNOR  
94. 4N-2927 [2] RACE-THRUST BEARING  
95. 4N-2953 [1] RING-LOCK  
96. 4N-3779 [1] KEY-CAMSHAFT  
97. 136-7060 [1] CAMSHAFT AS  
97A. 136-7061 [1] CAMSHAFT-PUMP  
98. 8N-2663 [1] CARRIER-WEIGHT  
99. 8N-2662 [3] BOLT-SOCKET HEAD  
100. 4N-1723 [1] SHIELD-CARRIER  
101. 4N-0425 [3] WEIGHT-GOVERNOR  
102. 4N-0511 [3] DOWEL  
103. 4N-5482 [1] SHAFT-WEIGHT CARRIER  
104. 4N-9019 [1] DOWEL  
105. 9N-5822 [1] WASHER-THRUST  
106. 7M-7219 [1] BEARING-THRUST  
107. 126-7881 [1] HOUSING AS-PUMP  
108. 4N-5481 [1] STUD  
109. 4J-7533 [1] SEAL-O-RING  
110. 3H-0703 [1] DOWEL  
111. 9S-4180 [1] PLUG  
112. 8N-0984 [8] PIN-SPRING  
113. 7W-6335 [1] BEARING  
114. 8N-0628 [1] BEARING  
115. 140-0084 [2] DEFLECTOR-SPILL  
116. 147-4531 [4] BOLT-SOCKET HEAD (10-24X0.37-IN)  
117. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
118. 140-0083 [2] DEFLECTOR-SPILL  
 

#SEBP23080389
 

144-3519: PUMP GP-GOV & FUEL INJ

144-3519 PUMP GP-GOV & FUEL INJ
S/N 03Z15446-UP
i00541153 SEBP2308
1443519 PUMP GP-GOV & FUEL INJ Parts scheme
  For full view, you need register

Parts for your 3208 ENGINE - MACHINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 136-7059 Y [1] PUMP GP-GOV & FUEL INJ  
2. 144-3521 Y [1] SHUTOFF GP-ELECTRICAL  
3. 141-3275 Y [1] CONTROL GP-FUEL RATIO  
4. 4N-0443 [1] PIN-LOAD STOP  
5. 6N-0509 Y [1] TORQUE CONTROL GP  
6. 115-3455 [1] VALVE-BYPASS  
7. 4N-0605 [1] SPRING  
8. 166-0396 [1] COVER  
8A. 1P-7326 [1] WASHER (4.32X9.52X1.52-MM THK)  
8B. 3B-4501 [1] LOCKWASHER  
8C. 4B-2042 [1] NUT (8-32-THD)  
8D. 6N-0412 [1] SCREW AS-MACHINE  
8E. 8F-1326 [1] WASHER (4.2X9.5X0.8-MM THK)  
9. 166-0397 [1] GASKET  
10. 7L-8070 [2] BOLT  
11. 4N-5663 [1] SPRING (INNER)  
12. 4N-0527 [1] SPRING  
13. 4N-9226 [1] SPRING (OUTER)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New 6V29 Sleeve Metering Fuel System Pump Roll Pin Tool Is Used To Adjust And Make A Replacement Of Roll Pins In The Fuel Injection Pump Housing
1979/01/24
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1981/04/01
Check All Settings When Fuel Injection Pump Group Is Installed
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing
1982/10/20
New Seal Used On Governor Control Shaft
1982/12/15
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier
1984/01/18
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines
1984/08/22
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups
1985/04/01
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings
1985/12/01
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Four More Remanufactured Fuel Pump And Governor Groups Available
1987/09/01
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps
1987/12/01
Governor Springs For Sleeve Metering Fuel Systems
1990/06/01
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life
1991/07/01
New Spring Used In Governor Control Groups
1992/04/01
New Hold-Down Bolts For The Sleeve Metering Fuel System (SMFS) Governor Housing {1251}
1996/09/23
Improved Fuel Pump Plunger Helps Prevent Plunger And Sleeve Scuffing In Service 8.5 mm Fuel Injection Pump Assembly For Sleeve Metering Fuel System (SMFS) Governor And Fuel Injection Pump Groups{1251,1286}
1996/11/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Special Instruction
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Calibrating The 133-8985 Governor And Fuel Injection Pump Group Heavy Sleeve Metering Fuel System (HSMFS){650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation of Fuel Injection Pump and Governor Service Group{1286}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 5P4810 Bearing In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Installation Of 8N628 Bearing{7551, 1253}
Installation Of 8N628 Bearing{7551, 1253}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of FT1525 Alignment Pin, FT1526 Salvage Fixture And FT1698 Bearing Installation Tool For Reconditioning Of 3208 Governor Housings{1265, 1264}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Use Of 6V4068 Tool Group For Installation Of 9N5822 Thrust Washer{1253}
Service Letter-NACD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Australia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CFEL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-CSARL
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Americas
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Brazil
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Specifications
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Fuel Injection Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Automatic Timing Advance Unit
3208 INDUSTRIAL ENGINE
Drive Gear For The Injection Pump
3208 INDUSTRIAL ENGINE
Service Letter-China
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-Asia
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Service Letter-APD
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Certain 7N0449, 1W5829, 4W1819, 4W8483, 7W3710 And 1010060 Nozzles Assemblies Need To Be Removed From Parts Stock
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Product Support Program For Replacing The Timing Advance Unit And Fuel Pump Drive Gear On Certain 3208 Industrial Engines
Disassembly and Assembly
Fuel Injection Pump Housing And Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Check Valve And Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Automatic Timing Advance
3208 INDUSTRIAL ENGINE
Governor & Fuel Pump Drive
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing & Governor
3208 INDUSTRIAL ENGINE
Fuel Transfer Pump
3208 INDUSTRIAL ENGINE
Governor
3208 INDUSTRIAL ENGINE
Fuel Injection Pump Housing
3208 INDUSTRIAL ENGINE
Shutoff Housing, Check Valve & Bypass Valve
3208 INDUSTRIAL ENGINE
Fuel Injection Pumps
3208 INDUSTRIAL ENGINE
Service Magazine
Use The FT1525 Alignment Pin And FT1526 Fixture When Reconditioning Earlier 3208 Sleeve Metering Fuel Systems{0626,1264,1286}
1980/05/12
New Check Valve Used In Fuel Injection Pump Assembly{1251}
1980/05/26
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1981/02/23
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Fuel Pressure Relief Valve Is Shown Inverted (Wrong End Up) In Parts Book Illustrations {1253,1286}
1981/03/23
Check All Settings When Fuel Injection Pump Group Is Installed{1286,1264,1251,1253}
1981/03/30
FT1632 Bolt Used During Removal Of Sleeve From Sleeve Metering Fuel System{0621,1251,1253}
1981/08/31
Thrust Washer Used In Pump Housing For Sleeve Metering Fuel System{1253,1286}
1981/08/31
Bent Lever For Fuel Shut-Off Solenoid Can Cause Low Engine Performance{1286,1259}
1982/02/01
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Modification Of 2P8315 Bracket Assembly{0652,1286}
1982/08/16
FT1698 Driver Can Be Used For Reconditioning Of Governor Housing{0626,0665,1264,1286}
1982/10/18
New Seal Used On Governor Control Shaft{1264,1265}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
6V4163 Bit And 6V4164 Driver Now Available For Removal Of Bolts For Flyweight Carrier{0612,1264}
1983/12/05
New Fuel Injection Pumps, Fuel Injection Lines, Fuel Injection Nozzles, and Piston And Rod Groups Used On Some Engines{1000,1225,1251,1252,1254}
1984/08/13
New Outer Governor Spring And Torque Control Pin Used In Governor And Pump Groups{1264}
1985/04/08
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Four More Remanufactured Fuel Pump And Governor Groups Available {1286}
1987/09/14
Orifice Reverse Flow Check Valve Used In Fuel Injection Pumps{1251,1254}
1987/11/23
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
Check Valve Added To Keep Air From Entering Fuel System {1264}
1988/10/03
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Governor Springs For Sleeve Metering Fuel Systems {1264}
1990/05/21
Dowel Hole Removed From 8N3946 Governor Housing Improves Service Life{1287}
1991/07/08
New Spring Used In Governor Control Groups{1265}
1992/04/20
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Caterpillar Parts SIS Catalog 3208 :

PUMP GP-GOV & FUEL INJ
126-1042 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9002 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9001 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-9000 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
122-1925 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
114-0960 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
114-0957 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
112-6655 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
130-4745 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
132-3521 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
133-8985 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
133-8986 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
136-4636 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
136-4637 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
136-7058 PUMP GP-GOV & FUEL INJ
PUMP GP-GOV & FUEL INJ
136-7059 PUMP GP-GOV & FUEL INJ

Truck sale:

 
11,500 
Caterpillar D3208EP, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
CATERPILLAR 3208 1993
 
CATERPILLAR 3208 1993
- STATIONARY - DIESEL
WAGNER EQUIPMENT CO
United States
CATERPILLAR 3208 2004
 
CATERPILLAR 3208 2004
- STATIONARY GENERATOR SETS
EMPRESAS MATCO, S.A. DE C.V.
Sufragio Efectivo Norte 870 - Obregón -
1998 CAT 3208
USD $19,000 
1998 CAT 3208

Galactic Liquidation LLC
1990 CAT 3208
 
1990 CAT 3208

Ken Porter Auctions
Carson, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.