AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-6228 GOVERNOR GP-UNIT INJECTOR S/N 98Z4100-18508 PART OF 110-8743, 110-8746 ENGINE AR AN ATTACHMENT 120H NA


FUEL SYSTEM
GOVERNOR GP

MOTOR GRADER 120H NA MOTOR GRADER 4MK
 120H Motor Grader 4MK00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2310 120H NA 4MK   (1994)

FUEL SYSTEM

GOVERNOR GP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
113-6228 GOVERNOR GP-UNIT INJECTOR
113-6240 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
113-9872 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
113-9872 GOVERNOR GP-UNIT INJECTOR
 

#SEBP23100150
 

113-6228: GOVERNOR GP-UNIT INJECTOR

113-6228 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 110-8743, 110-8746 ENGINE AR
AN ATTACHMENT
i00123318 SEBP2310
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
    S/N 98Z4100-13940
  126-5929 Y [1] FASTENER GP-FUEL INJ PUMP  
    S/N 98Z13941-18508
  115-2552 Y [1] GOVERNOR GP-UNIT INJECTOR  
  111-2125 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100151
 

113-6240: GOVERNOR GP-UNIT INJECTOR

113-6240 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-UP
PART OF 110-8741, 146-8336 ENGINE AR
i00123322 SEBP2310
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  115-2563 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z4100-18508
  135-7301 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z18509-UP
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100152
 

113-9872: GOVERNOR GP-UNIT INJECTOR

113-9872 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-UP
PART OF 115-2552 GOVERNOR GP-UNIT INJECTOR
Type 1
AN ATTACHMENT
i00123349 SEBP2310
1139872 GOVERNOR GP-UNIT INJECTOR Parts scheme 1139872 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9858 Y [1] HOUSING GP-GOVERNOR  
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 113-9865 [1] LEVER AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 114-5065 [1] COVER  
  5L-4758 [1] SEAL-O-RING  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
  [2] BUSHING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 113-9439 [1] LEVER AS  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [2] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [2] RING-RETAINING  
30. 7C-5148 [1] CARRIER-FLYWEIGHT  
31. 2S-7316 [2] DOWEL  
32. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
33. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
34. 4P-8947 [1] RISER  
35. 4P-0737 [1] SHAFT-RISER  
36. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
37. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
38. 7L-3386 [1] SEAL-O-RING  
39. 7C-5884 [1] COVER-OIL SUMP  
40. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
41. 4P-4231 [1] COVER-REAR  
42. 6V-5100 [1] SEAL-O-RING  
43. 7C-5883 B [7] SHIM (0.25-MM THK)  
44. 7W-5591 [1] SEAT-GOVERNOR SPRING  
45. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
46. 4P-8948 [1] SEAT AS-SPRING  
47. 7W-8993 [2] WEIGHT  
48. 7C-5541 [2] PLATE  
49. 7W-1440 B [8] SHIM (0.12-MM THK)  
50. 115-1192 [1] SEAL-GOVERNOR HOUSING  
51. 7C-2743 [2] RACE  
52. 7W-5561 [1] BEARING-THRUST  
53. 8C-5061 [1] RING-RETAINING  
54. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
55. 7C-5150 [1] PIN  
56. 100-5743 [1] FLANGE  
57. 9Y-1837 [1] SPRING  
58. 4P-4983 [1] SLEEVE  
59. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
60. 5P-9757 [1] SEAL-O-RING  
61. 109-4587 [1] RING-TOLERANCE  
62. 6D-9953 [1] PIN-SPRING  
63. 8T-1460 [2] RING-RETAINING  
64. 108-1612 [1] CLEVIS  
65. 7C-8854 [1] PIN-CLEVIS  
66. 108-1613 [1] PISTON-SERVO  
67. 8C-3312 [1] RING-RETAINING  
68. 100-4387 [1] COVER-FUEL RATIO CONTROL  
69. 100-4388 [1] STOP-PRELOAD  
70. 7W-5324 [1] BEARING  
71. 5L-4758 [1] SEAL-O-RING  
72. 100-4390 [1] SPRING  
73. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
74. 100-4395 [1] SEAT-SPRING  
75. 6I-1564 [1] DIAPHRAGM  
76. 100-4389 [1] RETAINER-DIAPHRAGM  
77. 100-4392 [1] SPRING-SERVO  
78. 100-4394 [1] SEAT-SPRING  
79. 8N-5763 [1] SEAL  
80. 8N-5764 [1] PISTON  
81. 100-4393 [1] SPRING-RETURN  
82. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
83. 100-5737 M [1] SETSCREW-ADJUSTMENT  
84. 100-5738 M [1] NUT (M6X0.5-THD)  
85. 2M-9780 [1] SEAL-O-RING  
86. 105-4916 M [1] PLUG  
87. 101-2870 [1] RING-RETAINING  
88. 105-2945 [1] VALVE-GOVERNOR SERVO  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100153
 

113-9872: GOVERNOR GP-UNIT INJECTOR

113-9872 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-UP
PART OF 115-2552 GOVERNOR GP-UNIT INJECTOR
Type 2
AN ATTACHMENT
i00123350 SEBP2310
1139872 GOVERNOR GP-UNIT INJECTOR Parts scheme 1139872 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9858 Y [1] HOUSING GP-GOVERNOR  
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 100-5740 [1] SPRING-TORSION  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 113-9865 [1] LEVER AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 114-5065 [1] COVER  
  5L-4758 [1] SEAL-O-RING  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
  [2] BUSHING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 113-9439 [1] LEVER AS  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [2] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [2] RING-RETAINING  
30. 7C-5148 [1] CARRIER-FLYWEIGHT  
31. 2S-7316 [2] DOWEL  
32. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
33. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
34. 4P-8947 [1] RISER  
35. 4P-0737 [1] SHAFT-RISER  
36. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
37. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
38. 7L-3386 [1] SEAL-O-RING  
39. 7C-5884 [1] COVER-OIL SUMP  
40. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
41. 4P-4231 [1] COVER-REAR  
42. 6V-5100 [1] SEAL-O-RING  
43. 7C-5883 B [7] SHIM (0.25-MM THK)  
44. 7W-5591 [1] SEAT-GOVERNOR SPRING  
45. 7C-3776 [1] PISTON AS  
  4N-6404 [1] RING-RETAINING  
  4N-6406 [1] RING-SPACER  
  4N-6407 [1] SPOOL-DASHPOT  
46. 4P-8948 [1] SEAT AS-SPRING  
47. 7W-8993 [2] WEIGHT  
48. 7C-5541 [2] PLATE  
49. 7W-1440 B [8] SHIM (0.12-MM THK)  
50. 115-1192 [1] SEAL-GOVERNOR HOUSING  
51. 7C-2743 [2] RACE  
52. 7W-5561 [1] BEARING-THRUST  
53. 8C-5061 [1] RING-RETAINING  
54. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
55. 7C-5150 [1] PIN  
56. 115-2553 C [1] VALVE-GOVERNOR SERVO  
57. 9Y-1837 [1] SPRING  
58. 7N-2171 C [1] RING-RETAINING  
59. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
60. 5P-9757 [1] SEAL-O-RING  
61. 109-4587 [1] RING-TOLERANCE  
62. 6D-9953 [1] PIN-SPRING  
63. 8T-1460 [2] RING-RETAINING  
64. 108-1612 [1] CLEVIS  
65. 7C-8854 [1] PIN-CLEVIS  
66. 108-1613 [1] PISTON-SERVO  
67. 8C-3312 [1] RING-RETAINING  
68. 114-2897 C [1] COVER-FUEL RATIO CONTROL  
69. 105-4916 M [1] PLUG  
70. 7W-5324 [1] BEARING  
71. 2M-9780 [1] SEAL-O-RING  
72. 100-4390 [1] SPRING  
73. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
74. 100-4395 [1] SEAT-SPRING  
75. 6I-1564 [1] DIAPHRAGM  
76. 114-2899 C [1] RETAINER-DIAPHRAGM  
77. 100-4392 [1] SPRING-SERVO  
78. 100-4394 [1] SEAT-SPRING  
79. 8N-5763 [1] SEAL  
80. 8N-5764 [1] PISTON  
81. 100-4393 [1] SPRING-RETURN  
82. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
83. 100-5737 M [1] SETSCREW-ADJUSTMENT  
84. 100-5738 M [1] NUT (M6X0.5-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100154
 

115-2552: GOVERNOR GP-UNIT INJECTOR

115-2552 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-UP
PART OF 113-6228 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT
i00123388 SEBP2310
1152552 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-9872 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
7. 4P-5605 [4] SHIM (0.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100155
 

115-2552: GOVERNOR GP-UNIT INJECTOR

115-2552 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 113-6228 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT
i00123389 SEBP2310
1152552 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-6690 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
7. 4P-5605 [4] SHIM (0.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100156
 

115-2563: GOVERNOR GP-UNIT INJECTOR

115-2563 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 113-6240 GOVERNOR GP-UNIT INJECTOR
Type 1
i00123392 SEBP2310
1152563 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 107-7872 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100157
 

115-2563: GOVERNOR GP-UNIT INJECTOR

115-2563 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 113-6240 GOVERNOR GP-UNIT INJECTOR
Type 2
i00123393 SEBP2310
1152563 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 107-7872 [1] CAM AS  
3. 7E-9749 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 100-4391 [1] SPRING-OIL SIDE  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100158
 

126-0468: GOVERNOR GP-UNIT INJECTOR

126-0468 GOVERNOR GP-UNIT INJECTOR
S/N 98Z18509-22033
PART OF 110-8743, 110-8746 ENGINE AR
AN ATTACHMENT
i00123771 SEBP2310
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  126-5929 Y [1] FASTENER GP-FUEL INJ PUMP  
  133-3064 Y [1] GOVERNOR GP-UNIT INJECTOR  
  111-2125 Y [1] LINES GP-GOVERNOR OIL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23100159
 

130-7326: GOVERNOR GP-UNIT INJECTOR

130-7326 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 115-2563 GOVERNOR GP-UNIT INJECTOR
i00123867 SEBP2310
1307326 GOVERNOR GP-UNIT INJECTOR Parts scheme 1307326 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7325 [1] HOUSING AS  
  100-5734 [1] SHAFT-LIMIT  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 8T-0269 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [2] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING  
31. 100-5740 [1] SPRING-TORSION  
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
35. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
39. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (0.25-MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] PLATE  
51. 7W-1440 B [8] SHIM (0.12-MM THK)  
52. 115-1192 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
57. 7C-5150 [1] PIN  
58. 117-9099 [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 125-8158 [1] SLEEVE-RACK CONTROL  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 114-2897 [1] COVER-FUEL RATIO CONTROL  
71. 7N-2171 [1] RING-RETAINING  
72. 7W-5324 [1] BEARING  
73. 115-2553 [1] VALVE-GOVERNOR SERVO  
74. 100-4390 [1] SPRING  
75. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
76. 129-4284 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 114-2899 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT (M6X0.5-THD)  
87. 2M-9780 [2] SEAL-O-RING  
88. 128-4786 [2] PLUG  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Engine Governor Oil Supply Screen - Clean/Inspect/Replace
120H and 135H Motor Graders
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly
Specifications
Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Specification
3114, 3116 and 3126 MUI Engine Governors
Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Control
120H and 135H Motor Graders Power Train
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Systems Operation
Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors
Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors
Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors
Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors
Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors
Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors
Information Release Memo
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors
Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors
Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors
Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors
Governor - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors
Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors
Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 120H NA :

GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
FILTER GP-SECONDARY FUEL
128-3937 FILTER GP-SECONDARY FUEL
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
126-5929 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
8W-4743 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
8W-4743 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
113-6240 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
113-9872 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
113-9872 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-2552 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-2552 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-2563 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
115-2563 GOVERNOR GP-UNIT INJECTOR
126-0468 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar 120HNA, Construction
52,000 
Caterpillar 120HNA, Construction
- motor graders
WHAYNE SUPPLY COMPANY
Caterpillar 120HNA, Construction
54,000 
Caterpillar 120HNA, Construction
- motor graders
WHAYNE SUPPLY COMPANY
 
67,539 USD 
Caterpillar 120HNA, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Australia
 
70,293 
Caterpillar 120HNA, Construction
- motor graders
avspare
Caterpillar 120HNA, Construction
64,900 
Caterpillar 120HNA, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.