AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8W-5595 CONSOLE GP-OPERATOR -SHIFTER S/N 4MK1-529 PART OF 8W-6224 CHASSIS AR 120H NA MOTOR GRADER


OPERATOR STATION
CONSOLE GP
CONTROL GP
CONTROL GP-STEERING

MOTOR GRADER 120H NA MOTOR GRADER 4MK
 120H Motor Grader 4MK00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2310 120H NA 4MK   (1994)

OPERATOR STATION

CONSOLE GP
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
 

#SEBP23100820
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4MK1-529
PART OF 8W-6224 CHASSIS AR
i00122525 SEBP2310
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
3. 188-1171 [1] PLATE AS  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
4. 7M-0706 [1] KNOB (SHIFTER)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 253-4019 [1] CONTROL-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER  
14. 105-8681 [1] GATE AS  
  M   METRIC PART
 

#SEBP23100821
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4MK530-1008
PART OF 8W-6224 CHASSIS AR
i00875197 SEBP2310
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
  6V-9632 M NUT-WELD (M6X1-THD)  
3. 198-7654 [1] PLATE AS  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 161-1343 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (PANEL SHIFT COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB (SHIFTER)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23100822
 

8W-5595: CONSOLE GP-OPERATOR

8W-5595 CONSOLE GP-OPERATOR -SHIFTER
S/N 4MK1009-UP
PART OF 8W-6224 CHASSIS AR
i01748413 SEBP2310
8W5595 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 143-9288 [1] COVER  
2. 143-9290 [1] PLATE AS  
3. 198-7654 [1] PLATE AS  
  6V-9632 M [14] NUT-WELD (M6X1-THD)  
  7T-1099 [1] LINK  
  8D-3508 [2] BOSS (3/8-16X1-IN)  
5. 8X-5680 [1] FILM-PANEL (SHIFT PATTERN)  
6. 180-3531 C [1] CONTROL GP-TRANSMISSION  
7. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
8. 9X-2043 M [10] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8X-4879 [2] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
10. 9X-2042 M [2] SCREW-TRUSS HEAD (M6X1X12-MM)  
11. 143-9286 [1] COVER  
12. 9X-2041 M [10] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
13. 8X-8096 [1] FILM-COVER (SHIFT PANEL COVER)  
15. 105-8681 [1] GATE AS  
16. 7M-0706 [1] KNOB  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23100823
 

8X-2330: CONSOLE GP-OPERATOR

8X-2330 CONSOLE GP-OPERATOR
S/N 4MK1-UP
PART OF 8W-6224 CHASSIS AR
i00122657 SEBP2310
8X2330 CONSOLE GP-OPERATOR Parts scheme 8X2330 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-3676 [1] BASE  
2. 8X-1917 [1] CHANNEL AS  
3. 034-1994 [1] PIN  
4. 3B-4607 [2] PIN-COTTER  
5. 236-0737 [1] CYLINDER  
6. 6J-0488 [4] SCREW-BUTTON HEAD (3/8-16X0.875-IN)  
7. 8X-1921 [1] HOOD  
8. 8X-3789 [1] PANEL  
9. 2A-7184 [2] PLATE  
10. 8C-3442 [1] SPRING-COIL  
11. 2K-7979 [13] BUSHING  
12. 9X-2042 M [12] SCREW-TRUSS HEAD (M6X1X12-MM)  
13. 169-3679 [1] CHANNEL AS  
14. 8X-1908 [1] PANEL  
15. 8X-1911 [1] PANEL  
16. 8X-2160 [1] LEVER (STEERING WHEEL TILT CONTROL)  
17. 8X-3951 [1] PANEL  
18. 5M-8500 [1] KNOB (STEERING WHEEL TILT CONTROL)  
19. 123-1201 [1] PLATE (LH)  
20. 8D-7960 [2] PLATE  
21. 096-6166 [6] WASHER-HARD (4.5X9X1-MM THK)  
22. 3E-9865 [1] LOCKNUT (1/4-20-THD)  
23. 3Y-2806 [1] SPRING  
24. 8X-1904 [1] SPACER (20X35X26-MM THK)  
25. 6G-8814 [2] BRACKET  
26. 8X-1907 [1] SHAFT  
27. 160-8503 M [3] NUT (M10X1.5-THD)  
28. 8T-2561 [11] WASHER-HARD (10.5X28.5X5-MM THK)  
29. 2G-8572 [8] WASHER-SPECIAL  
30. 2G-8573 [8] CAP  
31. 5P-8167 [2] BOLT (3/8-16X0.625-IN)  
32. 8X-5123 [1] RETAINER  
33. 8X-2161 [1] LEVER (STEERING COLUMN TILT)  
34. 9M-5590 [1] BALL  
35. 5C-8312 M [6] NUT (M4X0.7-THD)  
36. 110-6241 [1] BRACKET  
37. 206-4097 [8] FASTENER  
38. 8X-1913 [6] SPACER (10.5X32X19.5-MM THK)  
39. 3K-6060 [6] LOCKNUT (3/8-16-THD)  
40. 174-8131 M [16] SCREW-TRUSS HEAD (M4X0.7X12-MM)  
41. 8X-2893 M [10] NUT (M4X0.7-THD)  
42. 031-2666 [1] ROD  
43. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
44. 8X-1914 [1] SHAFT  
46. 2K-5830 [2] BEARING AS-NEEDLE  
47. 206-9651 [1] PLATE (RH)  
48. 4L-6454 [4] BOLT (3/8-16X1-IN)  
49. 5P-1075 [8] WASHER-HARD (10.2X22.5X3-MM THK)  
50. 8X-3965 [1] RATCHET  
51. 3F-7514 [4] PIN  
52. 8T-9006 M [2] BOLT-SOCKET HEAD (M3X0.5X20-MM)  
53. 4B-4314 [1] RIVET  
54. 5S-7383 [6] BOLT (3/8-16X1.75-IN)  
55. 6G-2914 [1] LATCH  
56. 7I-4890 [1] PLATE AS  
57. 8L-7905 [2] RIVET-POP  
58. 8D-5641 B [14] BEARING  
59. 8T-1174 [4] SEAL-LIP TYPE  
60. 5P-5637 BD SEAL  
61. 030-8535 [1] BOLT-LOCKING (3/8-16X0.875-IN)  
62. 5P-5639 BD SEAL  
63. 6L-1962 [1] NUT-JAM (3/8-24-THD)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP23100824
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4MK161-438
PART OF 8W-6224 CHASSIS AR
i00123824 SEBP2310
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 136-5160 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 6J-1889 [1] SEAL-U-CUP  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 8T-4896 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP23100825
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4MK439-723
PART OF 8W-6224 CHASSIS AR
i01091518 SEBP2310
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 145-9077 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
  B   USE AS REQUIRED
 

#SEBP23100826
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4MK724-999
PART OF 8W-6224 CHASSIS AR
i01273584 SEBP2310
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 B [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP23100827
 

129-8215: CONTROL GP-CLUTCH

129-8215 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4MK1000-UP
PART OF 8W-6224 CHASSIS AR
i01621840 SEBP2310
1298215 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [3] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 207-4922 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 169-0922 C [1] ROD  
18. 4J-8922 C [1] ROD END (3/8-24-THD)  
19. 6V-8183 C [1] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3H-8538 [1] PIN  
22. 7V-0446 [2] CLIP  
23. 144-5323 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [1] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [2] NUT (5/8-18-THD)  
29. 8T-4122 [1] WASHER-HARD (17X32X3.5-MM THK)  
30. 5D-6539 [1] SEAL-O-RING  
31. 9X-6578 [1] NUT-FACE SEAL (1-11/16-12-THD)  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 147-7238 [1] BRACKET  
40. 149-2065 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 1B-2578 [1] NUT (3/8-16-THD)  
43. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 9G-9154 [1] CLIP  
46. 169-0921 C [1] ROD END (3/8-24 LH-THD)  
47. 1V-6341 [1] SEAL  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP23100828
 

8W-5618: CONTROL GP-CLUTCH

8W-5618 CONTROL GP-CLUTCH -INCHING PEDAL
S/N 4MK1-160
PART OF 8W-6224 CHASSIS AR
i00122526 SEBP2310
8W5618 CONTROL GP-CLUTCH Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8D-9973 [1] HOUSING  
2. 7K-2135 [1] BEARING-ROLLER  
3. 4J-2667 [1] BEARING AS-NEEDLE  
4. 9D-0145 [1] LEVER  
5. 8X-3805 [1] SHAFT  
6. 1B-8704 [2] KEY-WOODRUFF  
7. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
8. 4D-4895 [1] LEVER  
9. 5S-7383 [1] BOLT (3/8-16X1.75-IN)  
10. 6V-8801 [3] NUT (3/8-16-THD)  
11. 7X-0291 [3] BOLT (3/8-16X3.75-IN)  
12. 5P-1075 [9] WASHER-HARD (10.2X22.5X3-MM THK)  
13. 8X-2497 [1] LEVER  
14. 1F-4622 [2] BEARING AS-NEEDLE  
15. 8X-2498 [1] PEDAL-CLUTCH  
16. 129-3173 [1] BOLT-12 POINT HEAD (3/8-16X1.25-IN)  
17. 8G-7629 [1] ROD  
18. 4J-8922 [2] ROD END (3/8-24-THD)  
19. 6V-8183 [2] NUT-FULL (3/8-24-THD)  
20. 1B-0676 [1] PIN  
21. 3K-8280 [1] PIN-CLEVIS  
22. 7V-0446 [2] CLIP  
23. 9X-5694 [1] CABLE AS  
  8C-0620 [2] PROTECTOR-THREAD  
24. 5P-7704 [1] ROD END  
25. 6V-8187 [2] NUT (1/4-28-THD)  
26. 8T-9043 [1] BOLT (5/16-18X0.875-IN)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 9S-1354 [3] NUT (5/8-18-THD)  
29. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
30. 3D-4004 [1] SEAL-QUAD RING  
31. 133-9185 [1] ADAPTER  
32. 7M-8485 [1] SEAL-O-RING  
33. 7D-9212 [1] SPRING  
34. 6P-5442 [2] PLUG  
35. 133-9186 [1] COUPLER  
36. 8D-9974 [1] GASKET  
37. 8D-9969 [1] COVER  
38. 4L-6454 [6] BOLT (3/8-16X1-IN)  
39. 8X-7665 [1] BRACKET  
40. 1D-1313 [1] SPRING  
41. 8W-8909 [3] SLEEVE  
42. 8T-2502 [1] BOLT (3/8-16X1.125-IN)  
43. 1B-2578 [1] NUT (3/8-16-THD)  
44. 9J-8783 [1] SHIM (0.508-MM THK)  
45. 6J-1889 [1] SEAL-U-CUP  
 

#SEBP23100829
 

7I-4718: CONTROL GP-STEERING

7I-4718 CONTROL GP-STEERING
S/N 4MK1-UP
PART OF 8W-6224 CHASSIS AR
i00122360 SEBP2310
7I4718 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 120H NA MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-1501 Y [1] PUMP GP-METERING (HMU)  
2. 092-3200 [1] STEERING WHEEL  
3. 144-6695 [1] NUT (13/16-20-THD)  
4. 6V-7692 [4] BOLT-12 POINT HEAD (3/8-16X1.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Steering Column Tilt Control
120H and 135H Motor Graders
Steering Wheel Tilt Control
120H and 135H Motor Graders
Brakes, Indicators and Gauges - Test
120H and 135H Motor Graders
Special Instruction
Procedure to Install a Power Circuit When Installing the Control Gp – Transmission on Certain H Series Motor Graders {5258}
Procedure to Install a Power Circuit When Installing the Control Gp – Transmission on Certain H Series Motor Graders {5258}
Technical Information Bulletin
Return Failed Cylinders from the Operator Console of Motor Graders
Return Failed Cylinders from the Operator Console of Motor Graders
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Transmission Control May Not Allow Machine to Start Up if Installed on Certain H-Series Motor Graders {5258}
Transmission Control May Not Allow Machine to Start Up if Installed on Certain H-Series Motor Graders {5258}
Specifications
Operator Console
120H and 135H Motor Graders Hydraulic and Steering System
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Improved Start Switch Used{1416}
1987/05/25
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Vibration Resistant LED Kit Available For Use With Back-Lit Rocker Switches {1429}
1996/09/16
An Improved Adjustment Procedure For The Steering Console Cylinder Eliminates Steering Console Drift {4300,5258}
1997/01/27
Self Locking Bolt Improves Retention In Steering Console Cylinder {4310,4338}
1997/11/24
An Improved Adjustment Procedure For The Steering Console Cylinder Eliminates Steering Console Drift {5258}
1998/01/26
A New Cylinder for the Operator's Console Improves Service Life {5258}
2003/06/23
New Transmission Control Group is Now Used on Certain H and K Series Motor Graders {5258}
New Transmission Control Group is Now Used on Certain H and K Series Motor Graders {5258}

Caterpillar Parts SIS Catalog 120H NA :

118-0061 CONDENSER & MTG GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
7C-3942 COMPRESSOR GP-REFRIGERANT
7C-3942 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1906 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
134-3997 COMPRESSOR GP-REFRIGERANT
101-1759 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
101-1759 COMPRESSOR GP-REFRIGERANT
ARMREST GP
202-7668 ARMREST GP
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8W-5595 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
8X-2330 CONSOLE GP-OPERATOR
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
129-8215 CONTROL GP-CLUTCH
CONTROL GP-CLUTCH
8W-5618 CONTROL GP-CLUTCH

Truck sale:

Caterpillar 120HNA, Construction
52,000 
Caterpillar 120HNA, Construction
- motor graders
WHAYNE SUPPLY COMPANY
Caterpillar 120HNA, Construction
54,000 
Caterpillar 120HNA, Construction
- motor graders
WHAYNE SUPPLY COMPANY
 
67,539 USD 
Caterpillar 120HNA, Construction
- motor graders
WILLIAM ADAMS PTY. LTD.
Australia
 
70,293 
Caterpillar 120HNA, Construction
- motor graders
avspare
Caterpillar 120HNA, Construction
64,900 
Caterpillar 120HNA, Construction
- motor graders
FOLEY EQUIPMENT COMPANY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.