126-0469 GOVERNOR GP-UNIT INJECTOR S/N 98Z18509-22033 PART OF 109-6609, 110-8744 ENGINE AR AN ATTACHMENT 135H NA

126-0469: GOVERNOR GP-UNIT INJECTOR

126-0469 GOVERNOR GP-UNIT INJECTOR
S/N 98Z18509-22033
PART OF 109-6609, 110-8744 ENGINE AR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

Part No	Qty	Parts name
126-5929 Y	[1]	FASTENER GP-FUEL INJ PUMP
133-3063 Y	[1]	GOVERNOR GP-UNIT INJECTOR
111-2125 Y	[1]	LINES GP-GOVERNOR OIL
Y		SEPARATE ILLUSTRATION

130-7326: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

130-7326 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-18508
PART OF 115-2565 GOVERNOR GP-UNIT INJECTOR

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	8T-0269 M	[1]	BOLT-SOCKET HEAD (M6X1X20-MM)
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING
31.	100-5740	[1]	SPRING-TORSION
32.	7C-5148	[1]	CARRIER-FLYWEIGHT
33.	2S-7316	[2]	DOWEL
34.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
35.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
36.	4P-8947	[1]	RISER
37.	4P-0737	[1]	SHAFT-RISER
38.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
39.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
40.	7L-3386	[1]	SEAL-O-RING
41.	7C-5884	[1]	COVER-OIL SUMP
42.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
43.	4P-4231	[1]	COVER-REAR
44.	6V-5100	[1]	SEAL-O-RING
45.	7C-5883 B	[7]	SHIM (0.25-MM THK)
46.	7W-5591	[1]	SEAT-GOVERNOR SPRING
47.	7C-3776	[1]	PISTON AS
	4N-6407	[1]	SPOOL-DASHPOT
	4N-6404	[1]	RING-RETAINING
48.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
49.	7W-8993	[2]	WEIGHT
50.	7C-5541	[2]	PLATE
51.	7W-1440 B	[8]	SHIM (0.12-MM THK)
52.	115-1192	[1]	SEAL-GOVERNOR HOUSING
53.	7C-2743	[2]	RACE
54.	7W-5561	[1]	BEARING-THRUST
55.	8C-5061	[1]	RING-RETAINING
56.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
57.	7C-5150	[1]	PIN
58.	117-9099	[1]	FLANGE
59.	9Y-1837	[1]	SPRING
60.	125-8158	[1]	SLEEVE-RACK CONTROL
61.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
62.	5P-9757	[1]	SEAL-O-RING
63.	109-4587	[1]	RING-TOLERANCE
64.	6D-9953	[1]	PIN-SPRING
65.	8T-1460	[2]	RING-RETAINING
66.	108-1612	[1]	CLEVIS
67.	7C-8854	[1]	PIN-CLEVIS
68.	108-1613	[1]	PISTON-SERVO
69.	8C-3312	[1]	RING-RETAINING
70.	114-2897	[1]	COVER-FUEL RATIO CONTROL
71.	7N-2171	[1]	RING-RETAINING
72.	7W-5324	[1]	BEARING
73.	115-2553	[1]	VALVE-GOVERNOR SERVO
74.	100-4390	[1]	SPRING
75.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
76.	129-4284	[1]	SEAT-SPRING
77.	6I-1564	[1]	DIAPHRAGM
78.	114-2899	[1]	RETAINER-DIAPHRAGM
79.	100-4392	[1]	SPRING-SERVO
80.	100-4394	[1]	SEAT-SPRING
81.	8N-5763	[1]	SEAL
82.	8N-5764	[1]	PISTON
83.	100-4393	[1]	SPRING-RETURN
84.	111-7221	[1]	VALVE AS
	8C-5899	[1]	PIN-SPRING
85.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
86.	100-5738 M	[1]	NUT (M6X0.5-THD)
87.	2M-9780	[2]	SEAL-O-RING
88.	128-4786	[2]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

131-6690: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

131-6690 GOVERNOR GP-UNIT INJECTOR
S/N 98Z4100-22033
PART OF 115-2555, 133-3063 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-6689 Y	[1]	HOUSING GP-GOVERNOR
2.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
3.	8C-8546 M	[9]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
4.	107-7498	[1]	BLOCK AS-BEARING
		[2]	BUSHING
5.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
6.	7C-8854	[1]	PIN-CLEVIS
7.	8T-1460	[2]	RING-RETAINING
8.	7C-4483	[1]	SCREEN AS (OIL INLET)
9.	7C-5541	[2]	PLATE
10.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
11.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
12.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
13.	108-1612	[1]	CLEVIS
14.	7W-4313	[2]	WASHER (5X11X1.5-MM THK)
15.	8T-7060	[2]	RING-RETAINING
16.	125-8158	[1]	SLEEVE-RACK CONTROL
17.	5C-2874 M	[1]	NUT (M5X0.8-THD)
18.	115-2553	[1]	VALVE-GOVERNOR SERVO
19.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
20.	5P-9757	[1]	SEAL-O-RING
21.	6D-9953	[1]	PIN-SPRING
22.	108-1613	[1]	PISTON-SERVO
23.	8C-3312	[1]	RING-RETAINING
24.	7C-5148	[1]	CARRIER-FLYWEIGHT
25.	2S-7316	[2]	DOWEL
26.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
27.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
28.	7W-8993	[2]	WEIGHT
29.	4P-8947	[1]	RISER
30.	4P-0737	[1]	SHAFT-RISER
31.	7W-5591	[1]	SEAT-GOVERNOR SPRING
32.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
33.	7L-3386	[1]	SEAL-O-RING
34.	7C-5884	[1]	COVER-OIL SUMP
35.	4P-4231	[1]	COVER-REAR
36.	6V-5100	[1]	SEAL-O-RING
37.	7C-5883	[7]	SHIM (0.25-MM THK)
38.	7C-3776	[1]	PISTON AS
	4N-6404	[1]	RING-RETAINING
	4N-6406	[1]	RING-SPACER
	4N-6407	[1]	SPOOL-DASHPOT
39.	4P-8948	[1]	SEAT AS-SPRING
40.	7W-1440	[8]	SHIM (0.12-MM THK)
41.	7C-2743	[2]	RACE
42.	7W-5561	[1]	BEARING-THRUST
43.	115-1192	[1]	SEAL-GOVERNOR HOUSING
44.	8C-5061	[1]	RING-RETAINING
45.	7C-5150	[1]	PIN
46.	7C-5480	[1]	SPRING-TORSION
47.	7E-3217	[1]	LEVER AS
48.	3P-3547	[1]	RING-RETAINING
49.	128-4786	[2]	PLUG
50.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
51.	4P-3539	[1]	LEVER-THROTTLE
52.	4P-3537	[1]	RING-TOLERANCE
53.	9Y-1837	[1]	SPRING
54.	6V-8189	[1]	NUT (5/16-18-THD)
55.	117-9099	[1]	FLANGE
56.	114-2897	[1]	COVER-FUEL RATIO CONTROL
57.	7W-5324	[1]	BEARING
58.	6I-1564	[1]	DIAPHRAGM
59.	100-4392	[1]	SPRING-SERVO
60.	100-4394	[1]	SEAT-SPRING
61.	8N-5763	[1]	SEAL
62.	8N-5764	[1]	PISTON
63.	100-4393	[1]	SPRING-RETURN
64.	100-4397	[1]	BODY-VALVE
65.	129-4284	[1]	SEAT-SPRING
66.	100-4390	[1]	SPRING
67.	114-2899	[1]	RETAINER-DIAPHRAGM
68.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
70.	113-9439	[1]	LEVER AS
	100-5733	[1]	PIN
71.	4P-7351	[1]	LEVER AS-SHAFT
72.	2M-9780	[2]	SEAL-O-RING
73.	7N-2171	[1]	RING-RETAINING
74.	131-7905	[1]	LEVER AS
	8N-0984	[1]	PIN-SPRING
75.	114-5065	[1]	COVER
76.	100-5732	[1]	LEVER-TORQUE CAM
77.	M	[1]	SCREW (M6X0.5X22.5-MM)
78.	100-5738 M	[2]	NUT (M6X0.5-THD)
79.	100-5740	[1]	SPRING-TORSION
80.	100-5739	[1]	SPRING-TORSION
81.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
82.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
83.	109-4587	[1]	RING-TOLERANCE
84.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
85.	5L-4758	[1]	SEAL-O-RING
86.	129-3897	[1]	VALVE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

133-3062: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 98Z18509-UP
PART OF 135-7302 GOVERNOR GP-UNIT INJECTOR

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
2.	129-3897	[1]	VALVE
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	100-5740	[1]	SPRING-TORSION
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)(UNIT INJECTOR)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING (TOLERANCE)
31.	7C-5148	[1]	CARRIER-FLYWEIGHT
32.	2S-7316	[2]	DOWEL
33.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
34.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
35.	4P-8947	[1]	RISER
36.	4P-0737	[1]	SHAFT-RISER
37.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
38.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
39.	7L-3386	[1]	SEAL-O-RING
40.	7C-5884	[1]	COVER-OIL SUMP
41.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
42.	4P-4231	[1]	COVER-REAR
43.	6V-5100	[1]	SEAL-O-RING
44.	7C-5883 B	[7]	SHIM (0.25-MM THK)
45.	7W-5591	[1]	SEAT-GOVERNOR SPRING
46.	7C-3776	[1]	PISTON AS
46A.	4N-6407	[1]	SPOOL-DASHPOT
46B.	4N-6404	[1]	RING-RETAINING
46C.	4N-6406	[1]	RING-SPACER
47.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
48.	7W-8993	[2]	WEIGHT
49.	7C-5541	[2]	PLATE
50.	7W-1440 B	[8]	SHIM (0.12-MM THK)
51.	115-1192	[1]	SEAL-GOVERNOR HOUSING
52.	7C-2743	[2]	RACE
53.	7W-5561	[1]	BEARING-THRUST
54.	8C-5061	[1]	RING-RETAINING
55.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
56.	7C-5150	[1]	PIN
57.	117-9099	[1]	FLANGE
58.	9Y-1837	[1]	SPRING
59.	125-8158	[1]	SLEEVE-RACK CONTROL
60.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
61.	5P-9757	[1]	SEAL-O-RING
62.	109-4587	[1]	RING-TOLERANCE
63.	6D-9953	[1]	PIN-SPRING
64.	8T-1460	[2]	RING-RETAINING
65.	108-1612	[1]	CLEVIS
66.	7C-8854	[1]	PIN-CLEVIS
67.	108-1613	[1]	PISTON-SERVO
68.	8C-3312	[1]	RING-RETAINING
69.	114-2897	[1]	COVER-FUEL RATIO CONTROL
70.	7N-2171	[1]	RING-RETAINING
71.	7W-5324	[1]	BEARING
72.	115-2553	[1]	VALVE-GOVERNOR SERVO
73.	100-4390	[1]	SPRING
74.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
75.	129-4284	[1]	SEAT-SPRING
76.	6I-1564	[1]	DIAPHRAGM
77.	114-2899	[1]	RETAINER-DIAPHRAGM
78.	100-4392	[1]	SPRING-SERVO
79.	100-4394	[1]	SEAT-SPRING
80.	8N-5763	[1]	SEAL
81.	8N-5764	[1]	PISTON
82.	100-4393	[1]	SPRING-RETURN
83.	100-4397	[1]	BODY-VALVE
84.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
85.	100-5738 M	[1]	NUT (M6X0.5-THD)
86.	2M-9780	[2]	SEAL-O-RING
87.	128-4786	[2]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

133-3063: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

133-3063 GOVERNOR GP-UNIT INJECTOR
S/N 98Z18509-22033
PART OF 126-0469 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	131-6690 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	116-6673	[1]	CAM AS
3.	7E-9749	[1]	SPRING GP-GOVERNOR
		[1]	SPRING-LOW IDLE
		[1]	SPRING
4.	4P-5605	[4]	SHIM (0.5-MM THK)
5.	7C-4466	[1]	SPRING-DASHPOT
6.	7C-0989	[1]	PLUG-ORIFICE
7.	100-4391	[1]	SPRING-OIL SIDE
	Y		SEPARATE ILLUSTRATION

135-7302: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

135-7302 GOVERNOR GP-UNIT INJECTOR
S/N 98Z18509-UP
PART OF 113-6242 GOVERNOR GP-UNIT INJECTOR

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
117-1147	[1]	CAM AS
133-3062 Y	[1]	GOVERNOR GP-UNIT INJECTOR
7C-5989	[1]	PLATE-GOVERNOR INFORMATION
7C-0989	[1]	PLUG-ORIFICE
7E-9749	[1]	SPRING GP-GOVERNOR
7C-4466	[1]	SPRING-DASHPOT
100-4391	[1]	SPRING-OIL SIDE
Y		SEPARATE ILLUSTRATION

142-1421: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

142-1421 GOVERNOR GP-UNIT INJECTOR
S/N 98Z22034-UP
PART OF 147-0859 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	142-5052 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	116-6673	[1]	CAM AS
3.	7E-9749	[1]	SPRING GP-GOVERNOR
4.	4P-5605 B	[4]	SHIM (0.5-MM THK)
5.	7C-4466	[1]	SPRING-DASHPOT
6.	7C-0989	[1]	PLUG-ORIFICE
7.	4P-6493	[1]	PLATE-INFORMATION (GOVERNOR)
8.	100-4391	[1]	SPRING-OIL SIDE
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

142-5052: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

142-5052 GOVERNOR GP-UNIT INJECTOR
S/N 98Z22034-UP
PART OF 142-1421 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	142-5050 Y	[1]	HOUSING GP-GOVERNOR
2.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
3.	8C-8546 M	[9]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
4.	7E-3216	[1]	BLOCK AS-BEARING
	6F-5933	[2]	BEARING AS-NEEDLE
5.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
6.	7C-8854	[1]	PIN-CLEVIS
7.	8T-1460	[2]	RING-RETAINING
8.	7C-4483	[1]	SCREEN AS (OIL INLET)
9.	7C-5541	[2]	PLATE
10.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
11.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
12.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
13.	108-1612	[1]	CLEVIS
14.	7W-4313	[2]	WASHER (5X11X1.5-MM THK)
15.	8T-7060	[2]	RING-RETAINING
16.	125-8158	[1]	SLEEVE-RACK CONTROL
17.	5C-2874 M	[1]	NUT (M5X0.8-THD)
18.	115-2553	[1]	VALVE-GOVERNOR SERVO
19.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
20.	5P-9757	[1]	SEAL-O-RING
21.	6D-9953	[1]	PIN-SPRING
22.	108-1613	[1]	PISTON-SERVO
23.	8C-3312	[1]	RING-RETAINING
24.	7C-5148	[1]	CARRIER-FLYWEIGHT
25.	2S-7316	[2]	DOWEL
26.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
27.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
28.	7W-8993	[2]	WEIGHT
29.	4P-8947	[1]	RISER
30.	4P-0737	[1]	SHAFT-RISER
31.	7W-5591	[1]	SEAT-GOVERNOR SPRING
32.	099-2374 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
33.	7L-3386	[1]	SEAL-O-RING
34.	7C-5884	[1]	COVER-OIL SUMP
35.	4P-4231	[1]	COVER-REAR
36.	6V-5100	[1]	SEAL-O-RING
37.	7C-5883 B	[7]	SHIM (0.25-MM THK)
38.	7C-3776	[1]	PISTON AS
	4N-6404	[1]	RING-RETAINING
	4N-6406	[1]	RING-SPACER
	4N-6407	[1]	SPOOL-DASHPOT
39.	4P-8948	[1]	SEAT AS-SPRING
40.	7W-1440 B	[8]	SHIM (0.12-MM THK)
41.	7C-2743	[2]	RACE
42.	7W-5561	[1]	BEARING-THRUST
43.	115-1192	[1]	SEAL-GOVERNOR HOUSING
44.	8C-5061	[1]	RING-RETAINING
45.	7C-5150	[1]	PIN
46.	7C-5480	[1]	SPRING-TORSION
47.	7E-3217	[1]	LEVER AS
48.	3P-3547	[1]	RING-RETAINING
49.	128-4786	[2]	PLUG
50.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
51.	4P-3539	[1]	LEVER-THROTTLE
52.	4P-3537	[1]	RING-TOLERANCE
53.	9Y-1837	[1]	SPRING
54.	6V-8189	[1]	NUT (5/16-18-THD)
55.	117-9099	[1]	FLANGE
56.	114-2897	[1]	COVER-FUEL RATIO CONTROL
57.	7W-5324	[1]	BEARING
58.	6I-1564	[1]	DIAPHRAGM
59.	100-4392	[1]	SPRING-SERVO
60.	100-4394	[1]	SEAT-SPRING
61.	8N-5763	[1]	SEAL
62.	8N-5764	[1]	PISTON
63.	100-4393	[1]	SPRING-RETURN
64.	100-4397	[1]	BODY-VALVE
65.	129-4284	[1]	SEAT-SPRING
66.	100-4390	[1]	SPRING
67.	114-2899	[1]	RETAINER-DIAPHRAGM
68.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
70.	113-9439	[1]	LEVER AS
	100-5733	[1]	PIN
71.	4P-7351	[1]	LEVER AS-SHAFT
72.	2M-9780	[2]	SEAL-O-RING
73.	7N-2171	[1]	RING-RETAINING
74.	131-7905	[1]	LEVER AS
	8N-0984	[1]	PIN-SPRING
75.	114-5065	[1]	COVER
76.	100-5732	[1]	LEVER-TORQUE CAM
77.	M	[1]	SCREW (M6X0.5X22.5-MM)
78.	100-5738 M	[2]	NUT (M6X0.5-THD)
79.	100-5740	[1]	SPRING-TORSION
80.	100-5739	[1]	SPRING-TORSION
81.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
82.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
83.	109-4587	[1]	RING-TOLERANCE
84.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
85.	5L-4758	[1]	SEAL-O-RING
86.	129-3897	[1]	VALVE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

147-0859: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

147-0859 GOVERNOR GP-UNIT INJECTOR
S/N 98Z22034-UP
PART OF 146-8347, 146-8348 ENGINE AR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Part No	Qty	Parts name
126-5929 Y	[1]	FASTENER GP-FUEL INJ PUMP
142-1421 Y	[1]	GOVERNOR GP-UNIT INJECTOR
111-2125 Y	[1]	LINES GP-GOVERNOR OIL
Y		SEPARATE ILLUSTRATION

113-9858: HOUSING GP-GOVERNOR

HOUSING GP-GOVERNOR

113-9858 HOUSING GP-GOVERNOR
S/N 98Z4100-UP
PART OF 113-9872 GOVERNOR GP-UNIT INJECTOR
AN ATTACHMENT

Parts for your 135H NA MOTOR GRADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	113-9440	[1]	HOUSING AS-REAR
	113-9432	[1]	SHAFT-LIMIT
2.	111-6813	[1]	MANIFOLD AS
	8C-5899	[2]	PIN-SPRING
3.	109-1301	[1]	PISTON
4.	111-3815	[1]	COLLAR AS
5.	8C-5899	[1]	PIN-SPRING
6.	033-6032	[1]	SEAL-O-RING
7.	110-6096	[1]	SPRING
8.	111-1576	[1]	SEAL-U-CUP
9.	2M-9780	[1]	SEAL-O-RING
10.	113-9859	[1]	PLUG
11.	9X-2537 M	[3]	BOLT-SOCKET HEAD (M6X1X70-MM)
12.	4T-8691 M	[1]	NUT
13.	111-0570 Y	[1]	VALVE GP-SOLENOID
14.	033-5879	[1]	SEAL-O-RING
15.	6T-5098	[1]	CLIP-CABLE
16.	099-0822 M	[1]	BOLT-SOCKET HEAD (M5X0.8X10-MM)
17.	100-5738 M	[1]	NUT (M6X0.5-THD)
18.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
19.	115-9840	[1]	SCREW-ADJUSTMENT
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

FUEL SYSTEM

GOVERNOR GP

Operation and Maintenance Manual

Engine Governor Oil Supply Screen - Clean/Inspect/Replace
120H and 135H Motor Graders

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly

Specifications

Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Specification
3114, 3116 and 3126 MUI Engine Governors

Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Control
120H and 135H Motor Graders Power Train

Service Letter-China

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Systems Operation

Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors

Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors

Information Release Memo

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Testing and Adjusting

Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors

Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors

Governor - Adjust
3114, 3116, and 3126 Engines

Disassembly and Assembly

Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

Mechanical Unit Injector Identification Code{1290}
1995/12/18

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01

New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01

Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01

New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08

Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 135H NA :

Truck sale:

414,623

Caterpillar 135HNA, Construction
- motor graders

CATERPILLAR 135HNA 2006
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan

USD $47,601

2006 CAT 135H NA

TOROMONT CAT - Main
TORONTO, Ontario, Canada