ELECTRICAL AND STARTING SYSTEM
CONVERTER GP-ELECTRICALELECTRONICS GP-POWER TRAIN
HARNESS GP
HEATER GP
ELECTRONICS GP-MACHINE
ELECTRICAL AND STARTING SYSTEM
CONVERTER GP-ELECTRICAL
#SEBP23110230
145-1261: CONVERTER GP-ELECTRICAL
145-1261 CONVERTER GP-ELECTRICAL
S/N 3YK1-UP
12V POWER PORT
PART OF 145-1278, 145-1279 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
S/N 3YK1-UP
12V POWER PORT
PART OF 145-1278, 145-1279 CONVERTER AR-ELECTRICAL
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 205-4285 | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 2. | 208-7782 | [1] | PLATE AS | |
| 3. | 096-6166 | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 4. | 3K-8782 | [1] | FUSE (10-AMPERE) | |
| 5. | 8T-2501 | [2] | BOLT (3/8-16X2-IN) | |
| 6. | 8T-0285 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 7. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 8. | 8X-1853 | [2] | SPACER (13.1X15.9X30.4-MM THK) | |
| M | METRIC PART | |||
#SEBP23110231
145-1297: CONVERTER GP-ELECTRICAL
145-1297 CONVERTER GP-ELECTRICAL -RADIO
S/N 3YK1-UP
PART OF 145-1300 INSTALLATION AR-RADIO
Type 1
AN ATTACHMENT
S/N 3YK1-UP
PART OF 145-1300 INSTALLATION AR-RADIO
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP23110232
145-1297: CONVERTER GP-ELECTRICAL
145-1297 CONVERTER GP-ELECTRICAL -RADIO
S/N 3YK1-UP
PART OF 145-1300 INSTALLATION AR-RADIO
Type 2
AN ATTACHMENT
S/N 3YK1-UP
PART OF 145-1300 INSTALLATION AR-RADIO
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8X-1853 | [2] | SPACER (13.1X15.9X30.4-MM THK) | |
| 2. | 9W-1442 | [1] | FUSE (10-AMPERE)(RADIO) | |
| 3. | 205-4285 C | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 4. | 208-7782 C | [1] | PLATE AS | |
| 5. | 096-6166 C | [2] | WASHER-HARD (4.5X9X1-MM THK) | |
| 6. | 8T-0285 M | [2] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 7. | 8T-2501 | [2] | BOLT (3/8-16X2-IN) | |
| 8. | 8T-4896 C | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP23110233
2A-7346: CONVERTER GP-ELECTRICAL
2A-7346 CONVERTER GP-ELECTRICAL
S/N 3YK1-UP
7.5 AMP. RADIO
PART OF 130-9921, 2A-7344 INSTALLATION AR-RADIO
Type 1
AN ATTACHMENT
S/N 3YK1-UP
7.5 AMP. RADIO
PART OF 130-9921, 2A-7344 INSTALLATION AR-RADIO
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP23110234
2A-7346: CONVERTER GP-ELECTRICAL
2A-7346 CONVERTER GP-ELECTRICAL
S/N 3YK1-UP
7.5 AMP. RADIO
PART OF 130-9921 INSTALLATION AR-RADIO
Type 2
AN ATTACHMENT
S/N 3YK1-UP
7.5 AMP. RADIO
PART OF 130-9921 INSTALLATION AR-RADIO
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP23110235
144-8622: ELECTRONICS GP-POWER TRAIN
144-8622 ELECTRONICS GP-POWER TRAIN
S/N 3YK267-UP
PART OF 8X-7709 WIRING GP-FRONT
S/N 3YK267-UP
PART OF 8X-7709 WIRING GP-FRONT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 258-5484 | [1] | SOFTWARE GP-POWER TRAIN | |
| -OR- | ||||
| 2. | 258-5485 | [1] | SERVICE GP-POWER TRAIN | |
| (OPTIONAL SERVICE REPLACEMENT) | ||||
| 258-5484 | [1] | SOFTWARE GP-POWER TRAIN | ||
| 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | ||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23110236
459-2251: HARNESS AS-CONTROL
459-2251 HARNESS AS-CONTROL
S/N 3YK1-UP
MACHINE SECURITY SYSTEM
PART OF 468-3606 INSTALLATION GP-SECURITY
S/N 3YK1-UP
MACHINE SECURITY SYSTEM
PART OF 468-3606 INSTALLATION GP-SECURITY
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 8C-6353 | [1] | CAP-PLUG | ||
| 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 374-7466 | [1] | CAP-SEAL | ||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 9W-1442 | [1] | FUSE (10-AMPERE) | ||
| 304-5284 | [1] | HOLDER-FUSE | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGES & INTERFACE SEAL) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 174-0503 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS , WEDGES & INTERFACE SEAL) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 9W-0852 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3E-5519 | [2] | PLUG AS-CONNECTOR (5-PIN) | ||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8735 | [1] | PLUG-CONNECTOR | ||
| 8T-8737 | [61] | PLUG-SEAL | ||
| 9W-1951 | [1] | RECEPTACLE-CONNECTOR (9-PIN) | ||
| 134-2540 | [2] | RECEPTACLE AS-CONNECTOR (3-PIN) | ||
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3402 | [47] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 329-3734 B | TAPE-ELECTRICAL | |||
| 9X-1056 | [4] | TERMINAL-RECEPTACLE (14-GA TO 16-GA) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
| 7N-9017 | [3] | TERMINAL-RING (18-GA TO 22-GA, NO. 10 SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(55-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP23110237
118-5227: HEATER GP-JACKET WATER
For full view, you need register
#SEBP23110238
7E-6310: HEATER GP-JACKET WATER
7E-6310 HEATER GP-JACKET WATER
S/N 3YK1-UP
120-VOLT, 1000-WATT
FOR USE WITH REAR EXHAUST TURBO GP
CANNOT BE USED WITH MOUNTING FOR LH OIL FILTER
AN ATTACHMENT
S/N 3YK1-UP
120-VOLT, 1000-WATT
FOR USE WITH REAR EXHAUST TURBO GP
CANNOT BE USED WITH MOUNTING FOR LH OIL FILTER
AN ATTACHMENT
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9N-5253 | [1] | CORD AS-HEATER ELEMENT (120-VOLT, 15-AMPERE) | |
| 2. | 4P-2949 | [1] | SHIELD-HEAT | |
| 3. | 124-0686 | [1] | ELEMENT AS-JACKET WATER HEATER (120-VOLT, 1000-WATT) | |
| 133-6517 | [1] | CAP AS-DUST | ||
| 132-1448 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS, SPACER & RINGS) | ||||
| 4. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
| 5. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP23110239
468-3606: INSTALLATION GP-SECURITY
468-3606 INSTALLATION GP-SECURITY -MACHINE SECURITY SYSTEM
S/N 3YK1-UP
FIELD INSTALLATION
S/N 3YK1-UP
FIELD INSTALLATION
For full view, you need register
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 459-2251 Y | [1] | HARNESS AS-CONTROL (MACHINE SECURITY SYSTEM) | ||
| 6V-7357 M | [4] | BOLT (M6X1X25-MM) | ||
| 8T-6912 M | [3] | BOLT (M8X1.25X50-MM) | ||
| 374-7464 | [1] | CAP-SEAL | ||
| 205-8257 | [1] | COIL AS (EXCITER) | ||
| 207-5271 | [1] | WASHER (27X60.5X0.36-MM THK) | ||
| 5P-5677 D | WIRE (18-GA, BLACK)(0.4-M) | |||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 226-5602 | [1] | FILM-IDENTIFICATION (EXCITER COIL) | ||
| 198-5389 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 200-5125 | [1] | FILM-IDENTIFICATION (IGNITION SWITCH) | ||
| 224-3385 | [1] | FILM-IDENTIFICATION (ENGINE START) | ||
| 205-0826 | [1] | FILM-INSTRUCTION (MACHINE SECURITY, CONSOLE) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 165-5655 | [1] | LAMP AS (24-VOLT)(SECURITY SYSTEM) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3T-0852 M | [3] | LOCKNUT (M8X1.25-THD) | ||
| 208-8469 M | [4] | LOCKNUT (M6X1-THD) | ||
| 129-3178 M | [4] | LOCKNUT (M6X1-THD) | ||
| 8T-9655 | [6] | MOUNT-ISOLATION | ||
| 149-9818 | [1] | PLATE | ||
| 479-1908 | [1] | PLATE AS | ||
| 5J-5326 | [3] | WASHER (0.766X1.5X0.52-IN THK) | ||
| 213-2323 | [1] | PLATE AS | ||
| 467-9245 | [1] | ELECTRONICS GP-MACHINE (SECURITY) | ||
| 285-3231 | [2] | KEY AS-ELECTRONIC (SECURITY) | ||
| 459-8447 | [1] | SOFTWARE GP-MACHINE | ||
| 3E-5239 | [2] | RELAY AS (24-VOLT) | ||
| 115-1615 | [2] | RELAY AS (12-VOLT) | ||
| 184-0982 M | [2] | SCREW-PAN HEAD (M6X1X16-MM) | ||
| 141-4976 | [4] | SCREW-WASHER HEAD (4-40X0.5-IN) | ||
| 6I-1418 | [3] | SPACER (8.2X12.7X28.7-MM THK) | ||
| 115-8109 | [2] | SPLICE-WIRE | ||
| 7K-1181 | [10] | STRAP-CABLE | ||
| 151-6320 | [2] | TOOL-WIRE REMOVAL | ||
| 9X-6165 | [8] | WASHER (6.5X22X2.5-MM THK) | ||
| 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
CONVERTER GP-ELECTRICAL
Service Magazine
Caterpillar Parts SIS Catalog 135H NA :
Truck sale:
CATERPILLAR 135HNA 2006
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
