HYDRAULIC SYSTEM
PUMP GPDRIVE GP
STEERING GP
PUMP GP
SWIVEL GP
TANK GP
HYDRAULIC SYSTEM
PUMP GP#SEBP23110700
6E-3137: PUMP GP-PISTON
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-4224 | [1] | PLUG-SWASHPLATE | |
| 2. | 033-6036 | [1] | SEAL-O-RING | |
| 3. | 100-3402 | [1] | BEARING-SWASH | |
| 4. | 100-3405 | [1] | BEARING-SWASH | |
| 5. | 6V-8837 M | [3] | BOLT (M6X1X16-MM) | |
| 6. | 4F-4097 | [1] | SEAL-O-RING | |
| 7. | 3E-4302 M | [2] | SCREW-FLAT HEAD (M4X0.7X10-MM) | |
| 8. | 100-3404 | [1] | COVER-TRUNNION | |
| 9. | 9T-1636 | [1] | SEAT | |
| 10. | 9T-1710 | [1] | POPPET | |
| 11. | 9T-1699 | [1] | SPRING | |
| 12. | 100-3403 | [1] | HEAD-PUMP | |
| 13. | 6E-1436 B | [1] | SHIM PACK (INCLUDES 17-SHIMS) | |
| 14. | 6Y-4280 | [1] | CONE-BEARING | |
| 15. | 7T-9755 | [1] | CUP-BEARING | |
| 16. | 9T-7775 | [1] | PLATE-VALVE | |
| 17. | 3E-7417 | [2] | PLUG | |
| 18. | 8T-7876 | [2] | SEAL-O-RING | |
| 19. | 7L-9061 | [2] | SEAL-O-RING | |
| 20. | 100-3413 | [1] | GASKET | |
| 21. | 100-3412 Y | [1] | ROTATING GP-PUMP | |
| 22. | 100-3409 | [1] | SPRING-BIAS | |
| 23. | 100-3408 | [1] | KIT-BIAS PISTON | |
| (INCLUDES SPRING, ROD, PISTON, SEAL) | ||||
| 24. | 002-1212 | [1] | CUP-BEARING | |
| 25. | 2F-8509 | [1] | CONE-BEARING | |
| 26. | 100-3401 | [1] | SHAFT-PUMP | |
| 27. | 100-3407 | [1] | HOUSING-PUMP | |
| 28. | 006-8663 | [1] | RING | |
| 29. | 8T-4750 | [1] | SEAL-LIP TYPE | |
| 30. | 100-3416 Y | [1] | SWASHPLATE GP | |
| 31. | 100-3415 | [1] | KIT-CONTROL PISTON | |
| (INCLUDES SPRING, ROD, PISTON, SEAL) | ||||
| 32. | 9T-1652 | [1] | PIN | |
| 33. | 6V-8336 M | [1] | BOLT (M12X1.75X70-MM) | |
| 34. | 6V-7673 M | [4] | BOLT (M12X1.75X50-MM) | |
| 35. | 8T-0372 M | [1] | BOLT (M12X1.75X90-MM) | |
| 36. | 6V-8337 M | [4] | BOLT-SOCKET HEAD (M8X1.25X35-MM) | |
| 37. | 104-3122 Y | [1] | VALVE GP-PUMP CONTROL (PRESSURE, FLOW COMPENSATOR) | |
| 38. | 9S-4183 | [1] | PLUG (1-1/16-12-THD) | |
| 39. | 3D-2824 | [1] | SEAL-O-RING | |
| 40. | 095-0888 | [2] | PIN-SPRING | |
| 41. | 109-3204 | [3] | SEAL-O-RING | |
| 42. | 104-3124 | [1] | SHIELD | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23110701
100-3412: ROTATING GP-PUMP
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9T-7774 | [1] | BARREL | |
| 2. | 3J-8500 | [1] | RING-RETAINING | |
| 3. | 9T-7769 | [1] | GUIDE-OUTER | |
| 4. | 6V-5192 M | [4] | BOLT-SOCKET HEAD (M8X1.25X30-MM) | |
| 5. | 100-3410 | [2] | PLATE | |
| 6. | 100-3411 | [2] | PLATE-SPACER | |
| 7. | 9T-7765 | [9] | PISTON | |
| 8. | 9T-7767 | [1] | PLATE-RETRACTION | |
| 9. | 9T-7773 | [1] | GUIDE-INNER | |
| 10. | 9T-7771 | [1] | SPRING | |
| M | METRIC PART | |||
#SEBP23110702
6E-6571: ROTATING GP-PUMP
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6E-6604 | [2] | PLATE-SPACER | |
| 2. | 6E-6605 | [2] | PLATE-LIMITER | |
| 3. | 3T-0849 M | [4] | BOLT-SOCKET HEAD (M6X1X25-MM) | |
| 4. | 9T-7755 | [1] | SPRING | |
| 5. | 009-2069 | [1] | RING | |
| 6. | 9T-7754 | [1] | GUIDE-OUTER | |
| 7. | 9T-7757 | [1] | BARREL | |
| 8. | 9T-7756 | [1] | GUIDE-INNER | |
| 9. | 9T-7759 | [1] | PLATE-RETAINING | |
| 10. | 9T-7761 | [9] | PISTON | |
| M | METRIC PART | |||
#SEBP23110703
7D-9600: SHAFT GP-PUMP DRIVE
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
| 2. | 112-5495 CY | [1] | UNIVERSAL JOINT GP-PUMP DRIVE | |
| 3. | 0L-0478 | [4] | BOLT (3/8-24X1.75-IN) | |
| 4. | 7D-9267 | [1] | YOKE | |
| 5. | 1B-8737 | [1] | KEY-WOODRUFF | |
| 6. | 1D-5120 | [1] | NUT-JAM (3/4-16-THD) | |
| 5P-8248 | [1] | WASHER-HARD (20X36.5X3.5-MM THK) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23110704
2A-6584: STEERING AR-SECONDARY
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP23110705
100-3416: SWASHPLATE GP
100-3416 SWASHPLATE GP
S/N 3YK1-UP
PART OF 6E-3137 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@169-3290@@@@@
AN ATTACHMENT
S/N 3YK1-UP
PART OF 6E-3137 PUMP GP-PISTON
FIELD REPLACEMENT ORDER @@@@@169-3290@@@@@
AN ATTACHMENT
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP23110706
169-3290: SWASHPLATE GP
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS#SEBP23110707
173-1011: SWIVEL GP
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 173-1009 | [1] | RETAINER | |
| 2. | 8J-2331 | [7] | SEAL | |
| 3. | 2H-3928 | [7] | SEAL-O-RING | |
| 4. | 173-1007 | [2] | SEAL | |
| 5. | 9T-5603 | [1] | BODY | |
| 6. | 4J-9964 | [2] | SEAL | |
| 7. | 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 9. | 1P-3700 | [4] | SEAL-RECTANGULAR | |
| 10. | 223-0580 | [1] | COVER | |
| 11. | 173-1008 | [1] | ROTOR | |
| 12. | 5J-1246 B | [6] | SHIM (0.13-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP23110708
9T-5604: SWIVEL GP
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5J-1246 B | [6] | SHIM (0.13-MM THK) | |
| 2. | 4K-1493 | [2] | SCREW-HOLLOW (1/2-13X1-IN) | |
| 3. | 8J-0380 | [1] | RETAINER | |
| 4. | 9T-5603 | [1] | BODY | |
| 5. | 8J-2331 | [7] | SEAL | |
| 6. | 2H-3928 | [7] | SEAL-O-RING | |
| 7. | 8J-0386 | [1] | ROTOR | |
| 8. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 8T-4223 | [4] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| 9. | 3H-0107 | [4] | SEAL-O-RING | |
| 10. | 8J-0377 | [1] | COVER | |
| 11. | 4J-9964 | [2] | SEAL | |
| 12. | 8J-2330 | [2] | SEAL | |
| B | USE AS REQUIRED | |||
#SEBP23110709
214-1984: TANK & FILTER GP-HYDRAULIC
214-1984 TANK & FILTER GP-HYDRAULIC
S/N 3YK600-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
S/N 3YK600-UP
PART OF 214-1983 TANK & MTG GP-HYDRAULIC
Parts for your 135H NA MOTOR GRADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4B-2913 | [1] | PIN-CLEVIS | |
| 2. | 1R-0774 | [1] | FILTER ELEMENT AS-OIL (ADVANCED EFFICIENCY) | |
| 3. | 2S-5100 | [1] | VALVE-MANUAL (HYDRAULIC TANK) | |
| 4. | 3F-1547 | [1] | SEAL-O-RING | |
| 6. | 4M-6921 | [1] | WASHER-SPRING | |
| 7. | 5D-1911 | [1] | COVER-HYDRAULIC CAP | |
| 8. | 226-2871 | [1] | ROD | |
| 9. | 9J-1979 | [1] | RETAINER AS | |
| 12. | 9J-3047 | [1] | STRAINER (HYDRAULIC) | |
| 13. | 9M-7394 | [1] | LEVER | |
| 14. | 141-9661 | [1] | SPACER (20X128X6-MM THK) | |
| 15. | 226-2870 | [1] | CAP AS (HYDRAULIC TANK) | |
| 16. | 214-1982 | [1] | TANK AS | |
| 17. | 217-2661 | [1] | GAUGE-SIGHT (HYDRAULIC) | |
| 18. | 086-0507 | [1] | PIN | |
| 19. | 1L-5072 | [1] | DOWEL | |
| 20. | 2D-4202 | [1] | PLATE | |
| 21. | 2J-7761 | [1] | RING-RETAINING | |
| 22. | 3K-6060 | [1] | LOCKNUT (3/8-16-THD) | |
| 23. | 3G-0361 | [1] | GASKET (HYDRAULIC TANK FILL CAP) | |
| 25. | 7D-1195 | [1] | SEAL-O-RING | |
| 26. | 7H-1447 | [1] | CAP-FILLER (HYDRAULIC TANK) | |
| 27. | 8T-2275 | [1] | BALL | |
| 28. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 30. | 9H-6454 | [1] | GASKET | |
| 31. | 3B-4611 | [1] | PIN-COTTER | |
| M | METRIC PART | |||
Information:
HYDRAULIC SYSTEM
PUMP GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Technical Information Bulletin
Specifications
Pump Control Valve (Pressure and Flow Compensator)
120H and 135H Motor Graders Hydraulic and Steering System
120H and 135H Motor Graders Hydraulic and Steering System
Electric Drive Pump (Secondary Steering)
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Systems Operation
Piston Pump (Hydraulic and Steering)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Metering Pump (Steering)
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Secondary Steering Hydraulic System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Secondary Steering Electrical System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Pump Control Valve
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Testing and Adjusting
Steering Wheel Slip - Check
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Bearing End Play (Piston Pump) - Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Hydraulic System Troubleshooting
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
120H, 12H, 135H, 140H, 143H, 14H, 160H, 163H and 16H Motor Graders Secondary Steering System
Pump Efficiency (Gear Pumps) - Test
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Pump Control Valve (Implement, Steering) - Test and Adjust
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
120H, 12H, 135H, 140H, 143H, 160H and 163H Motor Graders Hydraulic and Steering System
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Bench Test Procedure for Hydraulic Piston Pumps{0599, 5070, 5070}
Disassembly and Assembly
Service Magazine
Adjustment Screw With Better Fit Available For Pump Pressure Compensator Valve Groups {5086}
1996/06/10
1996/06/10
Caterpillar Parts SIS Catalog 135H NA :
Truck sale:
CATERPILLAR 135HNA 2006
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
- MOTOR GRADERS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan

