AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

1023143 ADJUSTER GP-BUCKET AN ATTACHMENT 307 EXCAVATOR


WORK TOOLS
BUCKET GP
BLADE GP
IMPLEMENTS
BOOM GP

EXCAVATOR 307 EXCAVATOR 2WM
 307 EXCAVATOR 2WM00001-00499 (MACHINE) POWERED BY 3054 ENGINE SEBP2313 307 2WM   (1992)

WORK TOOLS

BUCKET GP
ADJUSTER GP-BUCKET
102-3143 ADJUSTER GP-BUCKET
BUCKET AS
111-1271 BUCKET AS
BUCKET AS
111-0659 BUCKET AS
BUCKET AS
111-1274 BUCKET AS
 

#SEBP23130270
 

102-3143: ADJUSTER GP-BUCKET

1023143 ADJUSTER GP-BUCKET
AN ATTACHMENT
c581171 SEBP2313
1023143 ADJUSTER GP-BUCKET Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 086-1506 B [6] SHIM (1.0MM THK)  
  086-1505 B [4] SHIM (.5MM THK)  
2. 086-0091 [1] PIN  
3. 085-8824 [1] PLATE  
4. 8T-4183 M [3] BOLT (M12X1.75X40MM)  
5. 8T-4223 [3] WASHER-HARD (25.5MM OD)  
6. 086-1504 [1] FLANGE  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23130271
 

119-9410: BLADE AR

1199410 BLADE AR
2340MM NARROW
AN ATTACHMENT
c734813 SEBP2313
1199410 BLADE AR Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 120-7265 [1] BLADE & BEARING AS  
2. 093-1774 [2] BEARING-SLEEVE  
 

#SEBP23130272
 

118-1200: BLADE GP-STRAIGHT

1181200 BLADE GP-STRAIGHT
c585992 SEBP2313
1181200 BLADE GP-STRAIGHT Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-7283 [2] FITTING (65 DEG)  
2. 5I-9543 [2] PIN  
3. 5I-9544 [4] PIN  
4. 093-1430 [4] SEAL-LIP TYPE  
5. 8T-6868 M [4] BOLT (M12X1.75X80MM)  
6. 8T-4176 M [2] BOLT (M12X1.75X90MM)  
7. 8T-4244 M [12] NUT (M12X1.75 THD)  
8. 119-7588 [1] BLADE AS  
9. 093-1774 [2] BEARING-SLEEVE  
  M   METRIC PART
 

#SEBP23130273
 

102-5331: BOOM AR

1025331 BOOM AR
OFFSET
AN ATTACHMENT
SEBP23130273 SEBP2313
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  102-3139 Y [1] BOOM GP  
   
  118-4568 Y [1] CONTROL GP-HYDRAULIC  
   
  102-0792 Y [1] CYLINDER & SEAL GP  
  102-0795 Y [1] CYLINDER & SEAL GP  
  102-0796 Y [1] CYLINDER & SEAL GP  
   
  5I-8387 Y [1] LIGHTING GP-BOOM  
   
  108-7294 Y [1] LINES GP-BOOM  
  102-1182 Y [1] LINES GP-BOOM CYLINDER  
   
  115-2404 Y [1] LINES GP-FRONT  
   
  102-3140 Y [1] LINES GP-GREASE  
   
  102-1187 Y [1] LINES GP-PILOT  
   
  Y [1] PAINT & LUBRICANT GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23130274
 

102-5292: BOOM AR

1025292 BOOM AR
3.7M (12FT)
AN ATTACHMENT
SEBP23130274 SEBP2313
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
   
   
  102-3134 Y [1] BOOM GP  
   
  102-0792 Y [1] CYLINDER & SEAL GP  
   
  102-0793 Y [1] CYLINDER & SEAL GP  
   
  5I-8386 Y [1] LIGHTING GP-BOOM  
   
  102-1183 Y [1] LINES GP-BOOM  
   
  102-1182 Y [1] LINES GP-BOOM CYLINDER  
   
  102-3135 Y [1] LINES GP-GREASE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23130275
 

102-3134: BOOM GP

1023134 BOOM GP
PART OF 1025292 BOOM AR
AN ATTACHMENT
c581659 SEBP2313
1023134 BOOM GP Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-6347 [1] BOOM & BEARING AS  
2. 111-0096 [2] BEARING-SLEEVE  
3. 8T-4192 M [1] BOLT (M12X1.75X25MM)  
4. 8T-4223 [1] WASHER-HARD (25.5MM OD)  
5. 086-0297 [1] WASHER  
6. 5I-9520 [1] PIN AS  
7. 093-0065 [2] SHIM (1MM THK)  
  093-0097 [1] SHIM (2MM THK)  
  099-7091 [1] SHIM (1.5MM THK)  
8. 5I-9528 [1] PIN  
9. 111-0097 [1] PIN  
10. 093-0064 [4] SHIM  
  093-0096 [2] SHIM  
  099-7093 [2] SHIM  
11. 7X-2549 M [2] BOLT (M12X1.75X100MM)  
12. 8T-4244 M [4] NUT (M12X1.75 THD)  
13. 093-1433 [2] SEAL-LIP TYPE  
14. 3B-8488 [1] FITTING  
  M   METRIC PART
 

#SEBP23130276
 

102-3139: BOOM GP

1023139 BOOM GP
OFFSET
1161145-PAGE 222
PART OF 1025331 BOOM AR
AN ATTACHMENT
c631350 SEBP2313
1023139 BOOM GP Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 116-1145 Y [1] KIT-OFFSET BOOM  
2. 5I-9597 [1] PIN  
3. 5I-9521 [1] PIN  
4. 5I-9520 [1] PIN AS  
5. 7I-2225 [1] PIN  
6. 7X-2549 M [3] BOLT (M12X1.75X100MM)  
7. 8T-4244 M [5] NUT (12X1.75 THD)  
8. 8T-4192 M [1] BOLT (M12X1.75X25MM)  
9. 8T-4223 [1] WASHER-HARD  
10. 093-0357 [1] WASHER  
11. 093-0064 B [4] SHIM (1MM THK)  
  093-0096 B [2] SHIM (2MM THK)  
  099-7093 B [2] SHIM (1.5MM THK)  
12. 093-0065 B [2] SHIM (1MM THK)  
  093-0097 B [1] SHIM (2MM THK)  
  099-7091 B [1] SHIM (1.5MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23130277
 

116-1145: KIT-OFFSET BOOM

1161145 KIT-OFFSET-BOOM
1098620-PAGE 223, 1098660-PAGE 223
PART OF 1023139 BOOM
AN ATTACHMENT
c631353 SEBP2313
1161145 KIT-OFFSET BOOM Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-8636 [1] PIN  
2. 109-8638 [1] PIN  
3. 109-8637 [1] PIN  
4. 5I-9595 [1] PIN  
5. 109-8681 [1] BOOM AS  
6. 109-8620 Y [1] BOOM GP  
7. 109-8660 Y [1] BOOM GP  
8. 7X-2549 M [1] BOLT (M12X1.75X100MM)  
9. 8T-4244 M [4] NUT (M12X1.75 THD)  
10. 8T-4176 M [1] BOLT (M12X1.75X90MM)  
11. 7X-2568 M [2] BOLT (M20X2.5X180MM)  
12. 8T-4131 M [4] NUT (M20X2.50 THD)  
13. 093-0090 B [4] SHIM (1.0MM THK)  
  093-0122 B [2] SHIM (2.0MM THK)  
  7Y-3355 B [2] SHIM (1.6MM THK)  
14. 3B-8488 [2] FITTING-HYDRAULIC  
15. 109-8701 [1] BEARING & BAR AS  
16. 093-1775 [1] BEARING-SLEEVE  
17. 093-1776 [1] BEARING-SLEEVE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23130278
 

109-8660: BOOM GP

1098660 BOOM GP
UPPER OFFSET
PART OF 1161145 KIT-BOOM-OFFSET
AN ATTACHMENT
c623128 SEBP2313
1098660 BOOM GP Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 109-8664 [1] BOOM & BEARING AS  
2. 5I-9594 [4] BEARING-SLEEVE  
3. 3B-8488 [2] FITTING  
4. 3B-8489 [2] FITTING-GREASE  
5. 093-1382 [4] SEAL  
 

#SEBP23130279
 

109-8620: BOOM GP

1098620 BOOM GP
LOWER OFFSET
PART OF 1161145 KIT-BOOM-OFFSET
AN ATTACHMENT
c582022 SEBP2313
1098620 BOOM GP Parts scheme
  For full view, you need register

Parts for your 307 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-8488 [1] FITTING  
2. 093-1433 [2] SEAL-LIP TYPE  
3. 109-8639 [1] BEARING & BOOM AS  
4. 111-0096 [1] BEARING-SLEEVE  
 

Information:

Special Instruction
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Converting Excavator Buckets from J-Series Base Edge Assemblies to the K-Series{6523, 6800, 6803, 6823}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Convert the Buckets from the J-Series Base Edge Assemblies to the K-Series Base Edge Assemblies{6523, 6803, 6805}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Rework Procedure for the Repair or Replacement of the Excavator Bucket Hinge{6001, 6101, 6102, 6112, 6131, 6503, 6514, 6523, 6524, 6526, 6528, 6529, 6531, 6537, 6539}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Hydraulic Bucket Cylinders<BR> 105-7238
307 EXCAVATOR ATTACHMENTS
Bucket Adjuster Group<BR> 102-3143
307 EXCAVATOR ATTACHMENTS
Bucket Linkage<BR> 107-9942
307 EXCAVATOR ATTACHMENTS
Bucket Assemblies
307 EXCAVATOR ATTACHMENTS
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Disassembly and Assembly
Bucket
307 EXCAVATOR MACHINE SYSTEMS
Service Magazine
Tightening Torques For Locknut On Boom, Stick, Bucket, And Off-Set Cylinders Are Increased {5456,5457,5458,5463}
1996/01/29
The Special Instruction, REHS2834 , "Converting Straight Edge Buckets from the J-Series Base Edge Assemblies to the K-Series" Is Now Available. {6523, 6800, 6803, 6823}
2005/12/05
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Caterpillar Parts SIS Catalog 307 :

VALVE GP-SHUTTLE
107-6580 VALVE GP-SHUTTLE
VALVE GP-SOLENOID
8T-8692 VALVE GP-SOLENOID
VALVE GP-SELECTOR
114-8668 VALVE GP-SELECTOR
VALVE GP-PILOT RELIEF
102-0871 VALVE GP-PILOT RELIEF
VALVE GP-PILOT
4I-1684 VALVE GP-PILOT
VALVE GP-PILOT
102-0839 VALVE GP-PILOT
VALVE GP-PILOT
087-5675 VALVE GP-PILOT
VALVE GP-PILOT
121-1560 VALVE GP-PILOT
BLADE AR
119-9410 BLADE AR
BLADE GP-STRAIGHT
118-1200 BLADE GP-STRAIGHT
102-5331 BOOM AR
102-5292 BOOM AR
BOOM GP
102-3134 BOOM GP
BOOM GP
102-3139 BOOM GP
KIT-OFFSET BOOM
116-1145 KIT-OFFSET BOOM
BOOM GP
109-8660 BOOM GP
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.