AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

950F Series II Wheel Loader 2LM00001-UP (MACHINE) POWERED BY 3116 Engine WORK TOOLS Caterpillar SIS



WHEEL LOADER 950F II WHEEL LOADER 2LM
 950F Series II Wheel Loader 2LM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2315 950F II 2LM   (1994)

Parts group 950F II:

  For full view, you need register
WORK TOOLS
BUCKET GP
BUCKET AS-GENERAL PURPOSE
109-3635 BUCKET AS-GENERAL PURPOSE
109-3635 BUCKET AS-GENERAL PURPOSE
S/N 2LM1-99999
2.7 CU M(3.5 CU YD)
PART OF 110-0243 BUCKET GP-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
109-3636 BUCKET AS-GENERAL PURPOSE
109-3636 BUCKET AS-GENERAL PURPOSE
S/N 2LM1-99999
2.9 CU M(3.75 CU YD)
PART OF 110-0244 BUCKET GP-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
109-3637 BUCKET AS-GENERAL PURPOSE
109-3637 BUCKET AS-GENERAL PURPOSE
S/N 2LM1-99999
3.1 CU M(4.0 CU YD)
PART OF 110-0245 BUCKET GP-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
8R-8616 BUCKET AS-GENERAL PURPOSE
8R-8616 BUCKET AS-GENERAL PURPOSE
S/N 2LM1-99999
3.1 CU M (4.0 CU YD)
PART OF 8R-8614 BUCKET GP-GENERAL PURPOSE
BUCKET AS-GENERAL PURPOSE
8R-8617 BUCKET AS-GENERAL PURPOSE
8R-8617 BUCKET AS-GENERAL PURPOSE
S/N 2LM1-99999
2.9 CU M(3.75 CU YD)
BUCKET AS-ROCK
8R-8618 BUCKET AS-ROCK
8R-8618 BUCKET AS-ROCK
S/N 2LM1-99999
2.7 CU M (3.5 CU YD). BOLT-ON SEGMENTS OR EDGES
PART OF 8R-8611 BUCKET GP-ROCK
BUCKET AS-ROCK
8R-8619 BUCKET AS-ROCK
8R-8619 BUCKET AS-ROCK
S/N 2LM1-99999
2.7 CU M(3.5 CU YD)
PART OF 8R-8612 BUCKET GP-ROCK
110-0243 BUCKET GP-GENERAL PURPOSE
110-0243 BUCKET GP-GENERAL PURPOSE
S/N 2LM1-99999
110-0244 BUCKET GP-GENERAL PURPOSE
110-0244 BUCKET GP-GENERAL PURPOSE
S/N 2LM1-99999
110-0245 BUCKET GP-GENERAL PURPOSE
110-0245 BUCKET GP-GENERAL PURPOSE
S/N 2LM1-99999
3.1 CU M (4.0 CU YD)
8R-8614 BUCKET GP-GENERAL PURPOSE
8R-8614 BUCKET GP-GENERAL PURPOSE
S/N 2LM1-99999
2.9 CU M (3.75 CU YD) WITH BOLT-ON ADAPTERS, 3.1 CU M (4.00 CU YD) WITH BOLT-ON ADAPTER SEGMENTS. 3.1 CU M (4.00 CU YD) WITH BOLT-ON CUTTING EDGES. LOOSE MATERIAL
8R-8611 BUCKET GP-ROCK
8R-8611 BUCKET GP-ROCK
S/N 2LM1-99999
8R-8612 BUCKET GP-ROCK
8R-8612 BUCKET GP-ROCK
S/N 2LM1-99999
GROUND ENGAGING TOOLS (G.E.T.)
107-3411 ADAPTER GP-TIP
107-3411 ADAPTER GP-TIP
S/N 2LM1-99999
FOR USE WITH 109-3640 BUCKET AS
ADAPTER GP-TIP
9W-1376 ADAPTER GP-TIP
9W-1376 ADAPTER GP-TIP
S/N 2LM1-99999
FOR USE WITH 8R-8614 BUCKET GP-GENERAL PURPOSE
132-1060 EDGE GP-BIT & CUTTING
132-1060 EDGE GP-BIT & CUTTING
S/N 2LM1-99999
EDGE GP-BIT & CUTTING
3G-6341 EDGE GP-BIT & CUTTING
3G-6341 EDGE GP-BIT & CUTTING
S/N 2LM1-99999
FOR USE WITH 8R-8614 BUCKET GP-GENERAL PURPOSE, 109-3640 BUCKET AS, T570, T652
EDGE GP-BIT & CUTTING
9W-2238 EDGE GP-BIT & CUTTING
9W-2238 EDGE GP-BIT & CUTTING
S/N 2LM1-99999
PART OF 8R-8611 BUCKET GP-ROCK
132-1061 EDGE GP-CUTTING
132-1061 EDGE GP-CUTTING
S/N 2LM1-99999
7T-9327 EDGE GP-CUTTING
7T-9327 EDGE GP-CUTTING
S/N 2LM1-99999
FOR USE WITH 8R-8614 BUCKET GP-GENERAL PURPOSE, 109-3640 BUCKET AS, T570, T652
4T-5224 TIP GP-LONG
4T-5224 TIP GP-LONG
S/N 2LM1-99999
J-350
TIP GP-LONG
8J-4955 TIP GP-LONG
8J-4955 TIP GP-LONG -J-350
S/N 2LM1-99999
PART OF 4T-5224 TIP GP-LONG
TIP GP-LONG
9J-3167 TIP GP-LONG
9J-3167 TIP GP-LONG
S/N 2LM1-99999
J-300
PART OF 9W-8144 TIP GP-LONG
9W-8144 TIP GP-LONG
9W-8144 TIP GP-LONG
S/N 2LM1-99999
J-300
4T-5225 TIP GP-SHORT
4T-5225 TIP GP-SHORT
S/N 2LM1-99999
J-350
TIP GP-SHORT
8J-4954 TIP GP-SHORT
8J-4954 TIP GP-SHORT
S/N 2LM1-99999
J-350
PART OF 4T-5225 TIP GP-SHORT
TIP GP-SHORT
9J-3175 TIP GP-SHORT
9J-3175 TIP GP-SHORT
S/N 2LM1-99999
J-300. EXTREME SERVICE
PART OF 9W-8145 TIP GP-SHORT
9W-8145 TIP GP-SHORT
9W-8145 TIP GP-SHORT
S/N 2LM1-99999
J-300

Information:

(For parts list, see above)

Operation and Maintenance Manual
Bucket Rated Load
950F Series II Wheel Loader
Bucket Pivot Bearings - Lubricate
950F Series II Wheel Loader
Special Instruction
Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Service Magazine
Revised Special Instruction, SEHS8433-04, &quot;Repair Of Wheel And Track Loader Lift Arms And Levers&quot; Available {0374,6107,6116,6119}
1998/12/07
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24
Technical Information Bulletin
Wrong Resistor May be Installed into <NOBR>176-9668</NOBR> Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Wrong Resistor May be Installed into 176-9668 Instrument Console Gp on Certain Excavators and Wheel Loaders {1408, 1437, 6129}
Service Magazine
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Operation and Maintenance Manual
Logging Fork Clamp - Lubricate
950F Series II Wheel Loader
Service Magazine
Pilot Valve Group Available To Reduce Drift Related Problems In The Lift And Tilt Cylinders {5143,5102,5104}
1997/11/24
Operation and Maintenance Manual
Bucket Wear Plates - Inspect/Replace
950F Series II Wheel Loader
Bucket Cutting Edges - Inspect/Replace
950F Series II Wheel Loader
Bucket Tips - Inspect/Replace
950F Series II Wheel Loader
Special Instruction
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System
Instructions for Welding the &quot;K Series&quot; Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Procedure for Installation and Removal of Cat<SUP>&reg;</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Instructions for Welding the Cat<SUP>&reg;</SUP> Advansys&trade; Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Specifications
Ground Engaging Tool Torques
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Reuse And Salvage Guidelines
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Service Magazine
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14
The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Correction to Operation and Maintenance Manual , "Bucket Tips - Inspect/Replace" {6805}
2004/04/19
Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01
Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Tool Operating Manual
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Service Magazine
Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

Caterpillar 950F II
 
Caterpillar 950F II
- Wheel loaders
FINNING CANADA
 
46.000 
Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT
 
34,500 
Caterpillar 950FII, Construction
- Wheel Loaders

 
48,000 
Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950FII, Construction
31,500 
Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.