AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-4812 FASTENER GP-FUEL INJ PUMP S/N 98Z3715-99999 PART OF 107-7828, 4P-5526 GOVERNOR GP-UNIT INJECTOR 950F II


FUEL SYSTEM
PUMP GP-FUEL INJECTION
FILTER GP-FUEL
GOVERNOR GP

WHEEL LOADER 950F II WHEEL LOADER 2LM
 950F Series II Wheel Loader 2LM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2315 950F II 2LM   (1994)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
7W-4812 FASTENER GP-FUEL INJ PUMP
390-9331 KIT-INJECTOR
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
107-7732 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
PUMP GP-FUEL INJECTION
7E-7607 PUMP GP-FUEL INJECTION
 

#SEBP23150140
 

7W-4812: FASTENER GP-FUEL INJ PUMP

7W-4812 FASTENER GP-FUEL INJ PUMP
S/N 98Z3715-99999
PART OF 107-7828, 4P-5526 GOVERNOR GP-UNIT INJECTOR
i00191881 SEBP2315
7W4812 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3872 J [1] SLEEVE  
2. 9M-1974 [3] WASHER-HARD (8.8X16X2-MM THK)  
3. 6V-5218 M [3] BOLT (M8X1.25X35-MM)  
4. 9Y-5295 [1] TUBE  
5. 6F-6673 [1] SEAL-O-RING  
6. 7C-3839 [1] CLIP-SPRING  
7. 7E-0844 [1] SEAL  
8. 1T-1068 [1] SEAL-O-RING  
  J   INSTALL SLEEVE IN FRONT HOUSING
  M   METRIC PART
 

#SEBP23150141
 

139-5837: FILTER & LINES GP-FUEL

139-5837 FILTER & LINES GP-FUEL
S/N 98Z18486-99999
PART OF 112-9039, 138-1402 ENGINE AR
i00496361 SEBP2315
1395837 FILTER & LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
2. 5F-7054 [1] SEAL-O-RING  
3. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
4. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
5. 7E-5190 [1] TUBE AS  
6. 7E-5189 [1] VALVE AS (FUEL)  
7. 5P-7813 [1] SEAL-O-RING  
8. 3N-3252 [1] SPRING  
9. 8T-0151 [1] ADAPTER  
10. 3J-1907 [14] SEAL-O-RING  
11. 115-4184 [1] TEE-O-RING PORT  
12. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
13. 7E-5619 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
14. 5P-4961 [2] CLAMP-HOSE  
15. 119-2955 [1] CLIP  
16. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
17. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
18. 6N-4414 [1] COVER-FILTER BASE  
19. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
22. 068-9526 [1] CAP-TUBE  
23. 5C-7261 M [1] NUT (M8X1.25-THD)  
24. 3S-2093 [1] STRAP-CABLE  
25. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
26. 6V-8397 [7] SEAL-O-RING  
27. 115-4233 [1] TUBE AS  
28. 5P-1046 [1] CONNECTOR  
29. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
30. 6V-8774 [1] TEE  
31. 8T-0788 [1] ELBOW  
32. 9S-4191 [2] PLUG (9/16-18-THD)  
33. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
34. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
35. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
36. 5P-1318 [1] ADAPTER  
37. 129-1105 [1] BRACKET  
38. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
39. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
40. 6V-2317 M [2] BOLT (M8X1.25X30-MM)  
41. 5P-7970 M [2] NUT (M8X1.25-THD)  
42. 6V-8724 [1] ELBOW  
43. 8X-9255 I [1] HOSE AS  
44. 119-2978 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
45. 7X-2459 [2] ADAPTER-TEE  
46. 3E-7410 [1] TEE  
47. 8C-6867 [2] CONNECTOR  
48. 129-1090 [2] VALVE-DRAIN  
49. 003-7764 [2] END-HOSE  
50. 6V-8636 [1] CONNECTOR  
51. 112-9445 I [1] HOSE AS  
52. 4K-8864 [1] CLIP (LOOP)  
53. 5P-1442 BE HOSE  
54. 8L-5449 [1] SPACER (0.375X0.75X0.69-IN THK)  
55. 6V-5219 M [1] BOLT (M8X1.25X40-MM)  
56. 1J-9671 [1] SEAL-O-RING  
57. 6I-4802 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER  
58. 7C-1159 [1] GASKET  
59. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
60. 7X-0457 M [2] BOLT (M8X1.25X130-MM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150142
 

108-5769: FILTER GP-FUEL

108-5769 FILTER GP-FUEL
S/N 98Z3715-15411
PART OF 106-1756, 116-7958 ENGINE AR
i00192126 SEBP2315
1085769 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 6I-4802 [1] BASE AS  
  6I-4801 [1] INSERT-FILTER  
4. 7C-1159 [1] GASKET  
5. 7X-0457 M [1] BOLT (M8X1.25X130-MM)  
6. 1R-0751 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 3J-1907 [1] SEAL-O-RING  
9. 7E-5619 [1] BRACKET AS  
10. 2B-0941 [1] SPACER (10.5X19X19-MM THK)  
11. 8C-4984 M [1] BOLT (M8X1.25X150-MM)  
  M   METRIC PART
 

#SEBP23150143
 

129-3587: FILTER GP-FUEL

129-3587 FILTER GP-FUEL
S/N 98Z15412-18485
PART OF 112-9039, 138-1402 ENGINE AR
i00671975 SEBP2315
1293587 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
2. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
3. 6I-4802 [1] BASE AS  
  112-6523 [1] INSERT-FUEL FILTER  
4. 7C-1159 [1] GASKET  
5. 7X-0457 M [2] BOLT (M8X1.25X130-MM)  
6. 1R-0753 [1] FILTER-FUEL (ADVANCED EFFICIENCY)  
7. 9S-4191 [1] PLUG (9/16-18-THD)  
8. 3J-1907 [1] SEAL-O-RING  
9. 7E-5619 [1] BRACKET AS  
  8T-3612 M [1] NUT-WELD (M8X1.25-THD)  
  M   METRIC PART
 

#SEBP23150144
 

100-4499: GOVERNOR GP-UNIT INJECTOR

100-4499 GOVERNOR GP-UNIT INJECTOR
S/N 98Z3715-13921
PART OF 4P-5729 GOVERNOR GP-UNIT INJECTOR
i00192011 SEBP2315
1004499 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 4P-5676 [1] CLEVIS  
3. 4H-1641 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 4P-4985 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 7W-7362 [1] PISTON-GOVERNOR SERVO  
10. 4P-4983 [1] SLEEVE  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 104-7587 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
16. Z [1] PIN  
17. Z [2] SWIVEL  
18. Z [1] LEVER  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. Z [1] PIN  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
28. Z [1] SWIVEL  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 100-6810 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
40. Z [1] SHAFT  
41. Z [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
73. Z [1] INSERT  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4P-8694 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP23150145
 

100-8271: GOVERNOR GP-UNIT INJECTOR

100-8271 GOVERNOR GP-UNIT INJECTOR
S/N 98Z13922-99999
PART OF 108-6528 GOVERNOR GP-UNIT INJECTOR
i00192022 SEBP2315
1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme 1008271 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8272 [1] HOUSING AS (SHAFT)  
2. 100-6247 [1] PLUG-EXPANSION  
3. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
4. 4P-3539 [1] LEVER-THROTTLE  
5. 4P-3537 [1] RING-TOLERANCE  
6. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
7. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
8. 5C-2874 M [1] NUT (M5X0.8-THD)  
9. 8T-0269 M [1] BOLT-SOCKET HEAD (M6X1X20-MM)  
10. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
11. 6V-8189 [1] NUT (5/16-18-THD)  
12. 100-5732 [1] LEVER-TORQUE CAM  
13. 105-9790 [1] BRACKET AS  
  8N-0984 [1] PIN-SPRING  
14. 100-5736 M [1] SCREW (M6X0.5X22.5-MM)  
15. 100-5738 M [1] NUT (M6X0.5-THD)  
16. 101-1167 M [1] SCREW-BUTTON HEAD (M5X0.8X14-MM)  
17. 7C-5480 [1] SPRING-TORSION  
18. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
19. 4P-7351 [1] LEVER AS-SHAFT  
  Z PIN  
  Z SWIVEL  
  Z LEVER  
20. 107-7497 [1] WASHER-THRUST (8.25X20X0.5-MM THK)  
21. 107-7498 [1] BLOCK AS-BEARING  
22. 7E-3217 [1] LEVER AS  
  Z SWIVEL  
23. 3P-3547 [1] RING-RETAINING  
24. 8C-8546 M [1] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
25. 7C-4483 [1] SCREEN AS (OIL INLET)  
26. 100-5742 [1] LEVER AS-CONTROL  
  100-5733 [1] PIN  
27. 100-5739 [1] SPRING-TORSION  
28. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
29. 8T-7060 [1] RING-RETAINING  
30. 100-8311 [1] RING  
31. 100-5740 [1] SPRING-TORSION  
32. 7C-5148 [1] CARRIER-FLYWEIGHT  
33. 2S-7316 [2] DOWEL  
34. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
35. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
36. 4P-8947 [1] RISER  
37. 4P-0737 [1] SHAFT-RISER  
38. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
39. 8T-0269 M [6] BOLT-SOCKET HEAD (M6X1X20-MM)  
40. 7L-3386 [1] SEAL-O-RING  
41. 7C-5884 [1] COVER-OIL SUMP  
42. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
43. 4P-4231 [1] COVER-REAR  
44. 6V-5100 [1] SEAL-O-RING  
45. 7C-5883 B [7] SHIM (0.25-MM THK)  
46. 7W-5591 [1] SEAT-GOVERNOR SPRING  
47. 7C-3776 [1] PISTON AS  
  4N-6407 [1] SPOOL-DASHPOT  
  4N-6404 [1] RING-RETAINING  
48. 4P-8948 [1] SEAT AS-SPRING  
  [1] INSERT  
49. 7W-8993 [2] WEIGHT  
50. 7C-5541 [2] PLATE  
51. 7W-1440 B [8] SHIM (0.12-MM THK)  
52. 115-1192 [1] SEAL-GOVERNOR HOUSING  
53. 7C-2743 [2] RACE  
54. 7W-5561 [1] BEARING-THRUST  
55. 8C-5061 [1] RING-RETAINING  
56. 8C-8546 M [8] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
57. 7C-5150 [1] PIN  
58. 117-9099 C [1] FLANGE  
59. 9Y-1837 [1] SPRING  
60. 125-8158 C [1] SLEEVE-RACK CONTROL  
61. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
62. 5P-9757 [1] SEAL-O-RING  
63. 109-4587 [1] RING-TOLERANCE  
64. 6D-9953 [1] PIN-SPRING  
65. 8T-1460 [2] RING-RETAINING  
66. 108-1612 [1] CLEVIS  
67. 7C-8854 [1] PIN-CLEVIS  
68. 108-1613 [1] PISTON-SERVO  
69. 8C-3312 [1] RING-RETAINING  
70. 114-2897 [1] COVER-FUEL RATIO CONTROL  
71. 7N-2171 C [1] RING-RETAINING  
72. 7W-5324 [1] BEARING  
73. 115-2553 C [1] VALVE-GOVERNOR SERVO  
74. 100-4390 [1] SPRING  
75. 7W-1691 [1] WASHER (19.15X35X3-MM THK)  
76. 100-4395 [1] SEAT-SPRING  
77. 6I-1564 [1] DIAPHRAGM  
78. 114-2899 [1] RETAINER-DIAPHRAGM  
79. 100-4392 [1] SPRING-SERVO  
80. 100-4394 [1] SEAT-SPRING  
81. 8N-5763 [1] SEAL  
82. 8N-5764 [1] PISTON  
83. 100-4393 [1] SPRING-RETURN  
84. 111-7221 [1] VALVE AS  
  8C-5899 [1] PIN-SPRING  
85. 100-5737 M [1] SETSCREW-ADJUSTMENT  
86. 100-5738 M [1] NUT (M6X0.5-THD)  
87. 2M-9780 [1] SEAL-O-RING  
88. 105-4916 M [1] PLUG  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
  Z   NOT SERVICED SEPARATELY
 

#SEBP23150146
 

107-7828: GOVERNOR GP-UNIT INJECTOR

107-7828 GOVERNOR GP-UNIT INJECTOR
S/N 98Z15412-99999
PART OF 112-9039 ENGINE AR
i00599341 SEBP2315
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7W-4812 Y [1] FASTENER GP-FUEL INJ PUMP  
  107-7829 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z15412-21169
  135-7313 Y [1] GOVERNOR GP-UNIT INJECTOR  
    S/N 98Z21170-99999
  7W-8434 Y [1] LINES GP-GOVERNOR OIL  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150147
 

107-7829: GOVERNOR GP-UNIT INJECTOR

107-7829 GOVERNOR GP-UNIT INJECTOR
S/N 98Z15412-21169
PART OF 107-7828 GOVERNOR GP-UNIT INJECTOR
i00707624 SEBP2315
1077829 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 110-6243 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 4P-6493 [1] PLATE-INFORMATION (GOVERNOR)  
7. 4P-5605 B [4] SHIM (0.5-MM THK)  
8. 100-4391 [1] SPRING-OIL SIDE  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150148
 

108-6528: GOVERNOR GP-UNIT INJECTOR

108-6528 GOVERNOR GP-UNIT INJECTOR
S/N 98Z13922-99999
PART OF 4P-5526 GOVERNOR GP-UNIT INJECTOR
i00192127 SEBP2315
1086528 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-8271 Y [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 112-4056 [1] SPRING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150149
 

108-6528: GOVERNOR GP-UNIT INJECTOR

108-6528 GOVERNOR GP-UNIT INJECTOR
S/N 98Z13922-21189
PART OF 4P-5526 GOVERNOR GP-UNIT INJECTOR
i00192128 SEBP2315
1086528 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 130-7326 YC [1] GOVERNOR GP-UNIT INJECTOR  
2. 116-6673 [1] CAM AS  
3. 4P-2467 [1] SPRING GP-GOVERNOR  
4. 7C-4466 [1] SPRING-DASHPOT  
5. 7C-0989 [1] PLUG-ORIFICE  
6. 112-4056 [1] SPRING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Truck Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/01
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {0782, 1251, 1254, 1290, 1713}
2008/11/01
Engine News
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Operation and Maintenance Manual
Fuel Injection Timing - Check
950F Series II Wheel Loader
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Removal and Installation of Unit Injectors on 3114, 3116, and 3126 MUI Engines{1251, 1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-Truck/Ag/Marine
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Using the TMI System to Retrieve Off Engine Injection Pump Test Specifications for the Fuel Injection Equipment Test Stand{0706, 0782, 1251, 1286}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Testing and Adjusting Fuel Injection Pump and Governor on 3064 and 3066 Engines{0374, 0599, 0706}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
169-3374 Brass Injector Sleeve Removal Group for 3176 and 3176B Engines{0374, 0599, 0700, 0706}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Using the 223-2454 Tool Group on 3114, 3116, and 3126 Engines with Mechanical Unit Injectors (MUI){0374, 0599, 0701, 0706, 1251, 1252, 1254}
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Testing and Adjusting
Fuel Timing Dimension - Adjust
3114, 3116, and 3126 Engines
Unit Injector - Adjust
3114, 3116, and 3126 Engines
Unit Injector Synchronization - Adjust
3114, 3116, and 3126 Engines
Disassembly and Assembly
Unit Injector - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Unit Injector - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
6V3129 Nozzle Puller Group And FT1533 Nozzle Assembly Adapter Can Be Used To Remove Fuel Nozzles{0621,1254}
1981/02/02
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21
New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17
New "High Efficiency" Fuel Filters Help Prevent Worn Injectors{1261}
1995/07/31
New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06
Mechanical Unit Injector Identification Code{1290}
1995/12/18
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22
Fuel Injector Sleeve Replacement Tooling{0703,1125}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01
Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08
128-3102 Tap Assembly And 128-3104 Stud Puller To Remove Injector Sleeves With Oversized Lower Bore {1125}
1997/01/27
Mechanical Unit Fuel Injector Groups Spill Shield Changed {1290}
1997/06/09
Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01
Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23
Use 170-9227 Reamer Shims To Aid In Reaming Engine Injector Sleeves {1254}
1999/03/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Use 131-8362 Reamer Head For Reaming Seat In Injector Sleeves {1125,0703}
1999/08/17
New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13
Troubleshooting Engines with New Scroll Fuel Systems (NSFS) {1254}
2006/01/02
Troubleshooting Engines with Mechanical Unit Injection (MUI) {1254}
2006/01/02
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14
Improvements have been made to Remanufactured Fuel Injectors {1251, 1254, 1290, 1713}
2008/04/07
Policy on Testing of Fuel Injectors and Fuel Nozzles {1251}
2008/11/17
Do Not Use the 6V-4022 Fuel Injector Tester to Measure Unit Injector Fuel Flow Rate {1251, 1254, 1290, 1713}
2008/11/17
The Pop (Injector) Tester Is not Available for Fuel Injectors {0782, 1251, 1254, 1290, 1713}
2008/11/17
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Injectors Should Not Be Tested for Proper Operation Prior to Being Installed Into the Engine {1251, 1290}
2009/02/23

Caterpillar Parts SIS Catalog 950F II :

DRIVE GP-GOV & TRANSFER PUMP
7E-8794 DRIVE GP-GOV & TRANSFER PUMP
CONTROL GP-GOVERNOR
7E-9912 CONTROL GP-GOVERNOR
CONTROL GP-FUEL INJECTION
7W-6989 CONTROL GP-FUEL INJECTION
CONTROL GP-FUEL INJECTION
105-1695 CONTROL GP-FUEL INJECTION
TURBOCHARGER GP
126-5926 TURBOCHARGER GP
TURBOCHARGER GP
125-1126 TURBOCHARGER GP
TURBOCHARGER GP
107-7683 TURBOCHARGER GP
TURBOCHARGER GP
105-5059 TURBOCHARGER GP
FILTER & LINES GP-FUEL
139-5837 FILTER & LINES GP-FUEL
FILTER GP-FUEL
108-5769 FILTER GP-FUEL
FILTER GP-FUEL
129-3587 FILTER GP-FUEL
GOVERNOR GP-UNIT INJECTOR
100-4499 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
100-8271 GOVERNOR GP-UNIT INJECTOR
107-7828 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
107-7829 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
108-6528 GOVERNOR GP-UNIT INJECTOR

Truck sale:

Caterpillar 950F II
 
Caterpillar 950F II
- Wheel loaders
FINNING CANADA
 
46.000 
Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT
 
34,500 
Caterpillar 950FII, Construction
- Wheel Loaders

 
48,000 
Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950FII, Construction
31,500 
Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.