130-7326 GOVERNOR GP-UNIT INJECTOR S/N 98Z12922-21189 PART OF 107-7829, 108-6528 GOVERNOR GP-UNIT INJECTOR 950F II

130-7326: GOVERNOR GP-UNIT INJECTOR

130-7326 GOVERNOR GP-UNIT INJECTOR
S/N 98Z12922-21189
PART OF 107-7829, 108-6528 GOVERNOR GP-UNIT INJECTOR

Parts for your 950F II WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
2.	100-6247	[1]	PLUG-EXPANSION
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	8T-0269 M	[1]	BOLT-SOCKET HEAD (M6X1X20-MM)
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)(UNIT INJECTOR)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING
31.	100-5740	[1]	SPRING-TORSION
32.	7C-5148	[1]	CARRIER-FLYWEIGHT
33.	2S-7316	[2]	DOWEL
34.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
35.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
36.	4P-8947	[1]	RISER
37.	4P-0737	[1]	SHAFT-RISER
38.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
39.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
40.	7L-3386	[1]	SEAL-O-RING
41.	7C-5884	[1]	COVER-OIL SUMP
42.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
43.	4P-4231	[1]	COVER-REAR
44.	6V-5100	[1]	SEAL-O-RING
45.	7C-5883 B	[7]	SHIM (0.25-MM THK)
46.	7W-5591	[1]	SEAT-GOVERNOR SPRING
47.	7C-3776	[1]	PISTON AS
	4N-6407	[1]	SPOOL-DASHPOT
	4N-6404	[1]	RING-RETAINING
48.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
49.	7W-8993	[2]	WEIGHT
50.	7C-5541	[2]	PLATE
51.	7W-1440 B	[8]	SHIM (0.12-MM THK)
52.	115-1192	[1]	SEAL-GOVERNOR HOUSING
53.	7C-2743	[2]	RACE
54.	7W-5561	[1]	BEARING-THRUST
55.	8C-5061	[1]	RING-RETAINING
56.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
57.	7C-5150	[1]	PIN
58.	117-9099	[1]	FLANGE
59.	9Y-1837	[1]	SPRING
60.	125-8158	[1]	SLEEVE-RACK CONTROL
61.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
62.	5P-9757	[1]	SEAL-O-RING
63.	109-4587	[1]	RING-TOLERANCE
64.	6D-9953	[1]	PIN-SPRING
65.	8T-1460	[2]	RING-RETAINING
66.	108-1612	[1]	CLEVIS
67.	7C-8854	[1]	PIN-CLEVIS
68.	108-1613	[1]	PISTON-SERVO
69.	8C-3312	[1]	RING-RETAINING
70.	114-2897	[1]	COVER-FUEL RATIO CONTROL
71.	7N-2171	[1]	RING-RETAINING
72.	7W-5324	[1]	BEARING
73.	115-2553	[1]	VALVE-GOVERNOR SERVO
74.	100-4390	[1]	SPRING
75.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
76.	129-4284	[1]	SEAT-SPRING
77.	6I-1564	[1]	DIAPHRAGM
78.	114-2899	[1]	RETAINER-DIAPHRAGM
79.	100-4392	[1]	SPRING-SERVO
80.	100-4394	[1]	SEAT-SPRING
81.	8N-5763	[1]	SEAL
82.	8N-5764	[1]	PISTON
83.	100-4393	[1]	SPRING-RETURN
84.	111-7221	[1]	VALVE AS
	8C-5899	[1]	PIN-SPRING
85.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
86.	100-5738 M	[1]	NUT (M6X0.5-THD)
87.	2M-9780	[1]	SEAL-O-RING
88.	128-4786	[1]	PLUG
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

133-3062: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

133-3062 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21170-99999
PART OF 135-7313 GOVERNOR GP-UNIT INJECTOR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	130-7325	[1]	HOUSING AS
	100-5734	[1]	SHAFT-LIMIT
3.	3T-0849 M	[6]	BOLT-SOCKET HEAD (M6X1X25-MM)
4.	4P-3539	[1]	LEVER-THROTTLE
5.	4P-3537	[1]	RING-TOLERANCE
6.	7E-8794 Y	[1]	DRIVE GP-GOV & TRANSFER PUMP
7.	8T-5435 M	[1]	BOLT (M5X0.8X25-MM)
8.	5C-2874 M	[1]	NUT (M5X0.8-THD)
9.	100-5740	[1]	SPRING-TORSION
10.	1N-3887	[1]	SETSCREW-SOCKET (5/16-18X1.5-IN)
11.	6V-8189	[1]	NUT (5/16-18-THD)
12.	100-5732	[1]	LEVER-TORQUE CAM
13.	105-9790	[1]	BRACKET AS
	8N-0984	[1]	PIN-SPRING
14.	100-5736 M	[1]	SCREW (M6X0.5X22.5-MM)
15.	100-5738 M	[1]	NUT (M6X0.5-THD)
16.	101-1167 M	[2]	SCREW-BUTTON HEAD (M5X0.8X14-MM)
17.	7C-5480	[1]	SPRING-TORSION
18.	9X-2547 M	[2]	SCREW-FLAT HEAD (M5X0.8X30-MM)
19.	4P-7351	[1]	LEVER AS-SHAFT
20.	107-7497	[1]	WASHER-THRUST (8.25X20X0.5-MM THK)
21.	107-7498	[1]	BLOCK AS-BEARING
22.	7E-3217	[1]	LEVER AS
23.	3P-3547	[1]	RING-RETAINING
24.	8C-8546 M	[1]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
25.	7C-4483	[1]	SCREEN AS (OIL INLET)
26.	100-5742	[1]	LEVER AS-CONTROL
	100-5733	[1]	PIN
27.	100-5739	[1]	SPRING-TORSION
28.	7W-4313	[1]	WASHER (5X11X1.5-MM THK)
29.	8T-7060	[1]	RING-RETAINING
30.	100-8311	[1]	RING
31.	7C-5148	[1]	CARRIER-FLYWEIGHT
32.	2S-7316	[2]	DOWEL
33.	6V-7699	[4]	WASHER-HARD (5.5X13X1.6-MM THK)
34.	8C-8545 M	[4]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
35.	4P-8947	[1]	RISER
36.	4P-0737	[1]	SHAFT-RISER
37.	7C-5885	[1]	WASHER (24.5X41X3-MM THK)
38.	8T-0269 M	[6]	BOLT-SOCKET HEAD (M6X1X20-MM)
39.	7L-3386	[1]	SEAL-O-RING
40.	7C-5884	[1]	COVER-OIL SUMP
41.	6V-5213 M	[3]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
42.	4P-4231	[1]	COVER-REAR
43.	6V-5100	[1]	SEAL-O-RING
44.	7C-5883 B	[7]	SHIM (0.25-MM THK)
45.	7W-5591	[1]	SEAT-GOVERNOR SPRING
46.	7C-3776	[1]	PISTON AS
46A.	4N-6407	[1]	SPOOL-DASHPOT
46B.	4N-6404	[1]	RING-RETAINING
46C.	4N-6406	[1]	RING-SPACER
47.	4P-8948	[1]	SEAT AS-SPRING
		[1]	INSERT
48.	7W-8993	[2]	WEIGHT
49.	7C-5541	[2]	PLATE
50.	7W-1440 B	[8]	SHIM (0.12-MM THK)
51.	115-1192	[1]	SEAL-GOVERNOR HOUSING
52.	7C-2743	[2]	RACE
53.	7W-5561	[1]	BEARING-THRUST
54.	8C-5061	[1]	RING-RETAINING
55.	8C-8546 M	[8]	BOLT-SOCKET HEAD (M5X0.8X14-MM)
56.	7C-5150	[1]	PIN
57.	117-9099	[1]	FLANGE
58.	9Y-1837	[1]	SPRING
59.	125-8158	[1]	SLEEVE-RACK CONTROL
60.	7W-7364	[1]	SLEEVE-GOVERNOR SERVO
61.	5P-9757	[1]	SEAL-O-RING
62.	109-4587	[1]	RING-TOLERANCE
63.	6D-9953	[1]	PIN-SPRING
64.	8T-1460	[2]	RING-RETAINING
65.	108-1612	[1]	CLEVIS
66.	7C-8854	[1]	PIN-CLEVIS
67.	108-1613	[1]	PISTON-SERVO
68.	8C-3312	[1]	RING-RETAINING
69.	114-2897	[1]	COVER-FUEL RATIO CONTROL
70.	7N-2171	[1]	RING-RETAINING
71.	7W-5324	[1]	BEARING
72.	115-2553	[1]	VALVE-GOVERNOR SERVO
73.	100-4390	[1]	SPRING
74.	7W-1691	[1]	WASHER (19.15X35X3-MM THK)
75.	129-4284	[1]	SEAT-SPRING
76.	6I-1564	[1]	DIAPHRAGM
77.	114-2899	[1]	RETAINER-DIAPHRAGM
78.	100-4392	[1]	SPRING-SERVO
79.	100-4394	[1]	SEAT-SPRING
80.	8N-5763	[1]	SEAL
81.	8N-5764	[1]	PISTON
82.	100-4393	[1]	SPRING-RETURN
83.	100-4397	[1]	BODY-VALVE
84.	100-5737 M	[1]	SETSCREW-ADJUSTMENT
85.	100-5738 M	[1]	NUT (M6X0.5-THD)
86.	2M-9780	[2]	SEAL-O-RING
87.	128-4786	[2]	PLUG
88.	129-3897	[1]	VALVE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

135-7313: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

135-7313 GOVERNOR GP-UNIT INJECTOR
S/N 98Z21170-99999
PART OF 107-7828 GOVERNOR GP-UNIT INJECTOR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	133-3062 Y	[1]	GOVERNOR GP-UNIT INJECTOR
2.	110-6243	[1]	CAM AS
3.	4P-2467	[1]	SPRING GP-GOVERNOR
4.	7C-4466	[1]	SPRING-DASHPOT
5.	7C-0989	[1]	PLUG-ORIFICE
6.	100-4391	[1]	SPRING-OIL SIDE
7.	4P-5605 B	[4]	SHIM (0.5-MM THK)
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

4P-5526: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

4P-5526 GOVERNOR GP-UNIT INJECTOR
S/N 98Z3715-15411
PART OF 106-1756, 116-7958, 116-7959 ENGINE AR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7W-4812 Y	[1]	FASTENER GP-FUEL INJ PUMP
4P-5729 Y	[1]	GOVERNOR GP-UNIT INJECTOR
		S/N 98Z3715-13922
108-6528 Y	[1]	GOVERNOR GP-UNIT INJECTOR
		S/N 98Z13923-15411
7W-8434 Y	[1]	LINES GP-GOVERNOR OIL
Y		SEPARATE ILLUSTRATION

4P-5729: GOVERNOR GP-UNIT INJECTOR

GOVERNOR GP-UNIT INJECTOR

4P-5729 GOVERNOR GP-UNIT INJECTOR
S/N 98Z3715-13921
PART OF 4P-5526 GOVERNOR GP-UNIT INJECTOR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	100-4499 CY	[1]	GOVERNOR GP-UNIT INJECTOR
2.	106-7376 C	[1]	CAM-TORQUE
3.	4P-2467	[1]	SPRING GP-GOVERNOR
4.	7C-0989	[1]	PLUG-ORIFICE
5.	4P-5746	[1]	CONTROL AS-FUEL RATIO
6.	7C-4466	[1]	SPRING-DASHPOT
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

144-2506: KIT-FUEL FILTER

KIT-FUEL FILTER

144-2506 KIT-FUEL FILTER
S/N 2LM1-99999

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-1907	[5]	SEAL-O-RING
2.	9M-1974	[5]	WASHER-HARD (8.8X16X2-MM THK)
3.	6V-8397	[4]	SEAL-O-RING
4.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
5.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
6.	1R-0753	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
7.	129-1105	[1]	BRACKET
8.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
9.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
10.	6V-2317 M	[2]	BOLT (M8X1.25X30-MM)
11.	5P-7970 M	[2]	NUT (M8X1.25-THD)
12.	8X-9255 I	[1]	HOSE AS
13.	119-2978	[1]	BASE AS-FUEL FILTER
	112-6523	[1]	INSERT-FUEL FILTER
14.	7X-2459	[1]	ADAPTER-TEE
15.	3E-7410	[1]	TEE
16.	8C-6867	[2]	CONNECTOR
17.	129-1090	[2]	VALVE-DRAIN
18.	003-7764	[2]	END-HOSE
19.	6V-8636	[1]	CONNECTOR
20.	112-9445 I	[1]	HOSE AS
21.	1R-0751	[1]	FILTER-FUEL (ADVANCED EFFICIENCY)
22.	1B-7182	[1]	BOLT (5/16-18X1.25-IN)
23.	7B-2742	[1]	BOLT (1/4-20X1.25-IN)
24.	5P-0537	[1]	WASHER-HARD (7.2X14.5X2-MM THK)
25.	6N-4414	[1]	COVER-FILTER BASE
26.	1P-0436	[1]	GASKET (FUEL PRIMING PUMP)
27.	1J-9671	[1]	SEAL-O-RING
28.	5P-1318	[1]	ADAPTER
29.	5P-1442 BE		HOSE
30.	131-2406	[1]	FILM-INSTRUCTION
31.	5P-4961	[2]	CLAMP-HOSE
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

390-9331: KIT-INJECTOR

KIT-INJECTOR

390-9331 KIT-INJECTOR
S/N 2LM1-UP
SINGLE FUEL INJECTOR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	114-8718	[1]	SEAL-O-RING
	125-8274	[1]	SEAL-O-RING

8R-5337: LINES GP-FUEL

LINES GP-FUEL

8R-5337 LINES GP-FUEL
S/N 2LM1-99999
PART OF 106-0426, 108-8395 CHASSIS AR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7H-7055	[3]	CLIP
2.	3S-2093	[1]	STRAP-CABLE
3.	8T-4133 M	[4]	NUT (M10X1.5-THD)
4.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
5.	3L-2875	[3]	CLIP
6.	8R-9186	[2]	ANGLE
7.	5P-2228	[2]	BOLT (1/2-13X1-IN)
8.	8T-4223	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
9.	5M-1198	[1]	CLIP
10.	7M-0873	[1]	CLIP
11.	9U-3337 I	[1]	HOSE AS
12.	6V-8724	[1]	ELBOW
13.	3J-1907	[3]	SEAL-O-RING
14.	6V-8397 B	[5]	SEAL-O-RING
15.	6V-8627	[2]	ELBOW
16.	4J-5477	[4]	SEAL-O-RING
17.	9U-3338 I	[1]	HOSE AS
18.	7M-8322	[4]	CLIP
19.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
20.	7B-9919	[1]	CLIP
21.	113-4481	[1]	TUBE AS
22.	113-4479	[1]	TUBE AS
23.	9U-3336 I	[1]	HOSE AS
24.	8V-2017	[1]	BRACKET AS
	1F-0748	[1]	NUT-WELD (1/2-13-THD)
25.	7X-0901	[1]	ELBOW
26.	1J-9671	[1]	SEAL-O-RING
27.	9U-3339 I	[1]	HOSE AS
28.	8T-3647 M	[2]	BOLT (M8X1.25X80-MM)
29.	7C-4868	[2]	SPACER (20-MM THK)
30.	4D-9517	[1]	CLIP
31.	6V-9850 B	[1]	ELBOW
32.	6V-8934 B	[1]	ADAPTER
	B		USE AS REQUIRED
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

6I-2420: LINES GP-FUEL FILTER

LINES GP-FUEL FILTER

6I-2420 LINES GP-FUEL FILTER
S/N 98Z3715-18485
PART OF 106-1756, 112-9039, 116-7958, 116-7959, 138-1402 ENGINE AR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8M-9024	[2]	WASHER-HARD (10.2X22.5X5-MM THK)
2.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
3.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
4.	6V-8724	[1]	ELBOW
5.	3J-1907	[8]	SEAL-O-RING
6.	7W-0183	[1]	TUBE AS
7.	9S-1350	[1]	CLIP
8.	6V-8397	[5]	SEAL-O-RING
9.	9S-4191	[1]	PLUG (9/16-18-THD)
10.	6V-6317 M	[2]	BOLT (M10X1.5X20-MM)
11.	115-4233	[1]	TUBE AS
12.	5F-7054	[1]	SEAL-O-RING
13.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
14.	7E-5190	[1]	TUBE AS
15.	7E-5189	[1]	VALVE AS (FUEL)
16.	8T-0151	[1]	ADAPTER
17.	7X-2459	[1]	ADAPTER-TEE
18.	3N-3252	[1]	SPRING
19.	5P-7813	[1]	SEAL-O-RING
20.	5P-1046	[1]	CONNECTOR
21.	5P-4961	[2]	CLAMP-HOSE
22.	5P-1442 BE		HOSE
23.	6I-2422	[1]	VALVE AS
24.	6V-8774	[1]	TEE
25.	8T-0788	[1]	ELBOW
26.	115-4184	[1]	TEE-O-RING PORT
27.	4K-8864	[1]	CLIP (LOOP)
28.	6V-5219 M	[1]	BOLT (M8X1.25X40-MM)
29.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
30.	8L-5449	[1]	SPACER (0.375X0.75X0.69-IN THK)
31.	068-9526	[1]	CAP-TUBE
32.	9X-2099 M	[1]	STUD (M8X1.25X52.75-MM)
33.	5C-7261 M	[1]	NUT (M8X1.25-THD)
34.	3S-2093	[1]	STRAP-CABLE
35.	119-2955	[1]	CLIP
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

107-7731: LINES GP-FUEL RATIO CONTROL

LINES GP-FUEL RATIO CONTROL

107-7731 LINES GP-FUEL RATIO CONTROL
S/N 98Z5639-99999
PART OF 106-1756, 112-9039, 116-7958, 116-7959 ENGINE AR

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8647	[1]	CONNECTOR
2.	6V-8723	[1]	ELBOW
3.	107-7680	[1]	TUBE AS
4.	3K-0360	[1]	SEAL-O-RING
5.	4J-5477	[1]	SEAL-O-RING
6.	3J-7354	[1]	SEAL-O-RING
7.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
8.	6V-8397	[1]	SEAL-O-RING
9.	8M-2772	[1]	CLIP (LOOP)

Information:

FUEL SYSTEM

GOVERNOR GP

Operation and Maintenance Manual

Engine Governor Oil Supply Screen - Clean/Inspect/Replace
950F Series II Wheel Loader

Special Instruction

Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}

Governor Performance Data{1264}
Governor Performance Data{1264}

Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}

Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}
Installing the 4P-9048 Control Assembly or 102-7459 Control Assembly{1298}

Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}

Service Letter-NACD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Service Letter-Brazil

Service Letter-Truck/Ag/Marine

Technical Information Bulletin

Loose Rivet In Rack Control Assembly
Loose Rivet In Rack Control Assembly

Specifications

Governor Identification - Introduction
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V)
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Specification
3114, 3116 and 3126 MUI Engine Governors

Governor Performance Data
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Service Letter-China

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Service Letter-Asia

Systems Operation

Governor Speed Circuit
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types I, II, III, and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Limiting Circuit (Types V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Fuel Ratio Control (Types I and IV)
3114, 3116 and 3126 MUI Engine Governors

Governor Servo (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Dashpot (Types I, III, IV, V, VI, and VII)
3114, 3116 and 3126 MUI Engine Governors

Governor Bias Spring (Most Types IV, V, and VI)
3114, 3116 and 3126 MUI Engine Governors

Governor Bumper Spring (Some Type IV)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VI)
3114, 3116 and 3126 MUI Engine Governors

Dual Horsepower (Type VII)
3114, 3116 and 3126 MUI Engine Governors

Torque Limiter Device (Some Type V)
3114, 3116 and 3126 MUI Engine Governors

Information Release Memo

PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS

Service Letter-APD

0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock

Testing and Adjusting

Prepare Calibration Bench for Test Procedure
3114, 3116 and 3126 MUI Engine Governors

Installation of Governor on 1U7326 Governor Calibration Bench
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Setting the Governor Load Stop Dimension for More Than 9.00 mm
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, IV, and V) - Check
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever Orientation (Types IV, V, VI, VII, and Some III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Check
3114, 3116 and 3126 MUI Engine Governors

Governor (Types I, II, and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Types IV and Some III) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Adjust
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Remove
3114, 3116 and 3126 MUI Engine Governors

Throttle Lever (Types IV, V, VI, VII, and Some III) - Install
3114, 3116 and 3126 MUI Engine Governors

Governor - Adjust
3114, 3116, and 3126 Engines

Disassembly and Assembly

Governor (Type I) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type I) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type III) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type IV) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type V) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VI) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type VII) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Disassemble
3114, 3116 and 3126 MUI Engine Governors

Governor (Type II) - Assemble
3114, 3116 and 3126 MUI Engine Governors

Governor - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Governor - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines

Service Magazine

6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23

Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16

Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07

Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28

Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10

Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10

Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09

Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16

More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22

Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03

Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16

Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24

Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25

Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16

9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28

Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06

Some 4C4462 Sleeve Removal And Installation Groups For Unit Injectors May Contain 4C5562 Reamer Assemblies That Are Dimensionally Incorrect {0782,1290}
1990/05/21

New Control Assemblies Used In Fuel Injection Control Groups {1298}
1994/01/17

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

Mechanical Unit Injector Identification Code{1290}
1995/12/18

Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Fuel Ratio Control (FRC) Setting{1278,1287}
1996/01/22

Governor Shimming Is Determined By The Governor Test Bench Calibration {1264,1289}
1996/07/01

New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines {1264,1265}
1996/07/01

Replacing The Shutoff Assembly In Engines With Older Governors {1264,1289}
1996/07/01

New Service Tool Calibration Pins For Mechanical Governed Engines{1264,1265}
1996/07/08

Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/08

Improvement Provides Better Sealing For Unit Injectors {1290}
1997/09/01

Lower O-Ring Seal Removed From Mechanical Fuel Injector Group{1290}
1998/03/23

New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22

New 173-1530 Injector Seating Tool Group Available {0710,1290}
1999/09/13

Caterpillar Parts SIS Catalog 950F II :

Truck sale:

Caterpillar 950F II
- Wheel loaders
FINNING CANADA

46.000

Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT

34,500

Caterpillar 950FII, Construction
- Wheel Loaders

48,000

Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT

31,500

Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT