AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3G-8786 CYLINDER GP-TILT S/N 2LM1-99999 177.8 MM BORE X 536 MM STROKE PART OF 3V-0136 CYLINDER & SEAL GP-TILT Type 1 950F II


HYDRAULIC SYSTEM
CYLINDER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP
LINES GP-FRONT
LINES GP-HYDRAULIC

WHEEL LOADER 950F II WHEEL LOADER 2LM
 950F Series II Wheel Loader 2LM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2315 950F II 2LM   (1994)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER & SEAL GP-LIFT
7V-5516 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-LIFT
7V-5517 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-TILT
3V-0136 CYLINDER & SEAL GP-TILT
CYLINDER GP-LIFT
1U-1147 CYLINDER GP-LIFT
CYLINDER GP-LIFT
1U-1148 CYLINDER GP-LIFT
CYLINDER GP-TILT
3G-8786 CYLINDER GP-TILT
CYLINDER GP-TILT
3G-8786 CYLINDER GP-TILT
 

#SEBP23150370
 

3G-8786: CYLINDER GP-TILT

3G-8786 CYLINDER GP-TILT
S/N 2LM1-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
Type 1
i00191769 SEBP2315
3G8786 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8785 [1] CYLINDER AS  
  7D-4726 [1] BLOCK  
2. 3G-9191 [1] BUSHING  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 6E-2192 [1] PISTON  
5. 9T-3503 [1] HEAD  
6. 1A-5576 [2] BOLT (7/8-9X4.5-IN)  
7. 5P-8249 [8] WASHER-HARD (24X41.5X4-MM THK)  
8. 6E-2191 [1] ROD AS  
9. 3G-8779 [1] BUSHING  
10. 8T-8389 [1] SEAL-WIPER  
11. 5J-8325 [1] SEAL-U-CUP  
12. 1D-4628 [6] BOLT (7/8-9X3.25-IN)  
13. 8C-9121 [1] SEAL AS  
14. 9F-1399 [1] SEAL-O-RING  
  4J-9218 [1] RING-BACKUP  
15. 5J-4997 [1] SEAL AS  
16. 3G-5098 [1] RING-WEAR  
17. 8T-6745 [1] RING-WEAR  
18. 2H-3755 [4] BOLT (5/16-18X0.43-IN)  
19. 7S-6369 [4] WASHER (0.344X0.75X0.188-IN THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23150371
 

3G-8786: CYLINDER GP-TILT

3G-8786 CYLINDER GP-TILT
S/N 2LM1-99999
177.8 MM BORE X 536 MM STROKE
PART OF 3V-0136 CYLINDER & SEAL GP-TILT
Type 2
i00540581 SEBP2315
3G8786 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-8785 [1] CYLINDER AS  
  7D-4726 [1] BLOCK  
2. 3G-9191 [1] BUSHING  
3. 5J-3488 [1] LOCKNUT (2-1/4-12-THD)  
4. 6E-2192 [1] PISTON  
5. 124-2726 C [1] HEAD  
6. 1A-5576 [2] BOLT (7/8-9X4.5-IN)  
7. 5P-8249 [8] WASHER-HARD (24X41.5X4-MM THK)  
8. 6E-2191 [1] ROD AS  
9. 3G-8779 [1] BUSHING  
10. 8T-8389 [1] SEAL-WIPER  
11. 5J-8325 [1] SEAL-U-CUP  
12. 1D-4628 [6] BOLT (7/8-9X3.25-IN)  
13. 8C-9121 [1] SEAL AS  
14. 9F-1399 [1] SEAL-O-RING  
  4J-9218 [1] RING-BACKUP  
15. 5J-4997 [1] SEAL AS  
16. 3G-5098 [1] RING-WEAR  
17. 8T-6745 [1] RING-WEAR  
18. 9T-2584 C [1] RING-RETAINING (INTERNAL)  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23150372
 

9U-1821: HYDRAULIC AR

9U-1821 HYDRAULIC AR
S/N 2LM1-99999
PART OF 108-8394, 9U-1820 GENERAL AR
i00688853 SEBP2315
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7V-5517 Y [1] CYLINDER & SEAL GP-LIFT  
  7V-5516 Y [1] CYLINDER & SEAL GP-LIFT  
  3V-0136 Y [1] CYLINDER & SEAL GP-TILT  
  9C-9750 Y [1] KICKOUT & POSITIONER GP  
  7V-8359 Y [1] LINES GP-HYDRAULIC  
  9C-8382 Y [1] LINES GP-LIFT CYLINDER  
  106-0431 Y [1] LINES GP-PILOT  
  8R-3546 Y [1] LINES GP-TILT CYLINDER  
  3V-0132 Y [1] MOUNTING GP-HYDRAULIC TANK  
  106-0432 Y [1] PUMP & MTG GP-HYDRAULIC  
  6E-6109 Y [1] TANK & FILTER GP-HYDRAULIC  
  4E-3169 Y [1] VALVE & MTG GP-MAIN CONTROL (2-FUNCTION)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150373
 

9U-1832: HYDRAULIC AR

9U-1832 HYDRAULIC AR
S/N 2LM1-99999
3 VALVE
PART OF 108-4925 LOGGING AR
i00191985 SEBP2315
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-1434 Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  112-7920 Y [1] LINES GP-FRONT  
  9U-3360 Y [1] LINES GP-PILOT  
  5V-7158 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  112-7921 [1] ARM AS-LIFT  
  6W-2952 [1] ARM AS-LIFT  
  4V-8674 [2] BUSHING  
  3V-2333 [2] BUSHING  
  5V-1874 [2] BUSHING  
  9V-4892 [1] BLOCK  
  5V-2798 [1] PLATE  
  5V-7047 [4] BLOCK  
  5V-7048 [2] BLOCK  
  5V-7050 [2] PLATE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150374
 

9U-4773: HYDRAULIC AR

9U-4773 HYDRAULIC AR
S/N 2LM1-99999
NON-LOGGER
i00191999 SEBP2315
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9U-1434 Y [1] CONTROL GP-PILOT OPERATED HYD (3-FUNCTION)  
  8R-3547 Y [1] LINES GP-FRONT  
    -OR-
  112-7920 Y [1] LINES GP-FRONT  
  9U-3360 Y [1] LINES GP-PILOT  
  4E-8598 Y [1] VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)  
  112-7921 [1] ARM AS-LIFT  
  6W-2952 [1] ARM AS-LIFT  
  5V-7047 [4] BLOCK  
  5V-7048 [2] BLOCK  
  5V-7050 [2] PLATE  
  3V-2333 [2] BUSHING  
  4V-8674 [2] BUSHING  
  5V-1874 [2] BUSHING  
  5V-2798 [1] PLATE  
  9V-4892 [1] BLOCK  
  4V-8687 [2] BOSS (91.1-MM ID)  
  4V-8690 [2] BOSS (60.7-MM ID)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23150375
 

9C-9750: KICKOUT & POSITIONER GP

9C-9750 KICKOUT & POSITIONER GP
S/N 2LM1-99999
PART OF 9U-1821 HYDRAULIC AR
i00191965 SEBP2315
9C9750 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4L-6454 [2] BOLT (3/8-16X1-IN)  
2. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
3. 5V-1410 [1] HOLDER (SWITCH)  
4. 4M-6425 [2] BOLT (5/16-18X1-IN)  
5. 7X-0579 [4] WASHER-HARD (8.8X25.5X2-MM THK)  
6. 8V-8814 [1] BRACKET  
7. 9X-9509 [1] CONTROL GP-LIFT KICKOUT  
8. 5V-2787 [1] MAGNET AS  
9. 5P-1075 [2] WASHER-HARD (10.2X22.5X3-MM THK)  
10. 3K-7092 [2] NUT AS-SPRING  
11. 7X-0388 [2] BOLT (7/8-9X4.5-IN)  
12. 7X-0545 [2] WASHER-HARD (24X40X5-MM THK)  
13. 4E-5210 [1] TUBE AS  
14. 4E-5209 [1] BRACKET  
15. 6V-9025 [1] SETSCREW  
16. 5S-7383 [2] BOLT (3/8-16X1.75-IN)  
17. 8T-3601 [4] SETSCREW-SOCKET (1/4-20-THD)  
18. 4V-4840 [1] MAGNET AS  
19. 8T-8917 [2] BOLT (1/2-13X1.25-IN)  
20. 8C-3121 [2] BOLT (5/16-18X1.5-IN)  
21. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 3E-5493 [1] CONTROL GP-BUCKET POSITIONER  
23. 030-8535 [2] BOLT-LOCKING (3/8-16X0.875-IN)  
24. 4E-5213 [1] COVER AS  
25. 1F-0748 [2] NUT-WELD (1/2-13-THD)  
 

#SEBP23150376
 

112-7920: LINES GP-FRONT

112-7920 LINES GP-FRONT
S/N 2LM1-347
PART OF 9U-4773 HYDRAULIC AR
i00707628 SEBP2315
1127920 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-9088 [1] BRACKET  
2. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
3. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 9C-9087 [1] BRACKET  
5. 8T-9382 [28] BOLT (7/16-14X1.25-IN)  
6. 8T-5360 [34] WASHER (12X22.5X2.5-MM THK)  
7. 2V-5043 I [2] HOSE AS  
8. 6V-0852 [1] CAP-DUST  
9. 1P-4578 [12] FLANGE-HALF  
10. 4J-0522 [6] SEAL-O-RING  
11. 4E-0220 [1] PLATE  
12. 3J-1907 [1] SEAL-O-RING  
13. 5V-7052 [1] TUBE AS  
14. 8T-9380 [6] BOLT (7/16-14X1-IN)  
15. 5V-7051 [1] TUBE AS  
16. 5H-4020 [2] COVER  
17. 9C-9201 [1] TUBE AS  
18. 8J-5914 [1] PLUG  
19. 2S-4078 [1] SEAL-O-RING  
20. 9C-9202 [1] TUBE AS  
21. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
22. 8C-6877 [8] BOLT (7/16-14X1.75-IN)  
23. 1P-3704 [2] SEAL-RECTANGULAR  
24. 7V-6556 [1] ELBOW  
25. 1P-3705 [1] SEAL-RECTANGULAR  
26. 8T-4835 [2] BOLT (1/2-13X2-IN)  
27. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7X-0326 [2] BOLT (1/2-13X3-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP23150377
 

112-7920: LINES GP-FRONT

112-7920 LINES GP-FRONT
S/N 2LM1-99999
PART OF 9U-1832, 9U-4773 HYDRAULIC AR
i00192157 SEBP2315
1127920 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-9088 [1] BRACKET  
2. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
3. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 9C-9087 [1] BRACKET  
5. 8T-9382 [28] BOLT (7/16-14X1.25-IN)  
6. 8T-5360 [34] WASHER (12X22.5X2.5-MM THK)  
7. 2V-5043 I [2] HOSE AS  
8. 6V-0852 [1] CAP-DUST  
9. 1P-4578 [12] FLANGE-HALF  
10. 4J-0522 [6] SEAL-O-RING  
11. 123-9767 [1] PLATE  
12. 3J-1907 [1] SEAL-O-RING  
13. 5V-7052 [1] TUBE AS  
14. 8T-9380 [6] BOLT (7/16-14X1-IN)  
15. 5V-7051 [1] TUBE AS  
16. 5H-4020 [2] COVER  
17. 115-1040 [1] TUBE AS  
18. 8J-5914 [1] PLUG  
19. 2S-4078 [1] SEAL-O-RING  
20. 115-1039 [1] TUBE AS  
21. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
22. 8C-6877 [8] BOLT (7/16-14X1.75-IN)  
23. 1P-3704 [2] SEAL-RECTANGULAR  
24. 7V-6556 [1] ELBOW  
25. 1P-3705 [1] SEAL-RECTANGULAR  
26. 8T-4835 [2] BOLT (1/2-13X2-IN)  
27. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7X-0326 [2] BOLT (1/2-13X3-IN)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP23150378
 

8R-3547: LINES GP-FRONT

8R-3547 LINES GP-FRONT
S/N 2LM1-99999
PART OF 9U-4773 HYDRAULIC AR
i00191920 SEBP2315
8R3547 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9C-9088 [1] BRACKET  
2. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
3. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
4. 9C-9087 [1] BRACKET  
5. 8T-9382 [28] BOLT (7/16-14X1.25-IN)  
6. 8T-5360 [34] WASHER (12X22.5X2.5-MM THK)  
7. 2V-5043 I [2] HOSE AS  
8. 5V-7048 [2] BLOCK  
9. 1P-4578 [12] FLANGE-HALF  
10. 4J-0522 [6] SEAL-O-RING  
11. 4E-0220 [1] PLATE  
12. 5V-7047 [4] BLOCK  
13. 5V-7052 [1] TUBE AS  
  6K-1694 [3] CLIP  
14. 8T-9380 [6] BOLT (7/16-14X1-IN)  
15. 5V-7051 [1] TUBE AS  
  6K-1694 [3] CLIP  
16. 5H-4020 [2] COVER  
17. 9C-9201 [1] TUBE AS  
18. 8J-5914 [1] PLUG  
19. 2S-4078 [1] SEAL-O-RING  
20. 9C-9202 [1] TUBE AS  
21. 5V-7050 [2] PLATE  
22. 8C-6877 [8] BOLT (7/16-14X1.75-IN)  
23. 1P-3704 [2] SEAL-RECTANGULAR  
24. 7V-6556 [1] ELBOW  
25. 1P-3705 [1] SEAL-RECTANGULAR  
26. 8T-4835 [2] BOLT (1/2-13X2-IN)  
27. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
28. 7X-0326 [2] BOLT (1/2-13X3-IN)  
29. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
30. 3J-1907 [1] SEAL-O-RING  
31. 6V-0852 [1] CAP-DUST  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
 

#SEBP23150379
 

7V-8359: LINES GP-HYDRAULIC

7V-8359 LINES GP-HYDRAULIC
S/N 2LM1-99999
PART OF 9U-1821 HYDRAULIC AR
i00191880 SEBP2315
7V8359 LINES GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 950F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4V-1777 I [1] HOSE AS  
2. 7X-0584 [4] WASHER-HARD (13.5X20.5X2-MM THK)  
3. 5P-2566 [8] BOLT (1/2-13X1.5-IN)  
4. 8T-8916 [18] BOLT (7/16-14X1.5-IN)  
  8T-5360 [18] WASHER (12X22.5X2.5-MM THK)  
5. 1P-4578 [8] FLANGE-HALF  
  4J-0522 [4] SEAL-O-RING  
6. 5P-7470 [1] CLIP (SLOT)  
  5P-7471 [1] CLIP (TAB)  
7. 5P-8182 [1] GROMMET (46-MM ID)  
8. 7X-3327 [1] BOLT-LOCKING (1/2-13X1.25-IN)  
9. 8T-4223 [13] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 7V-6428 [1] KEEPER  
11. 8T-4835 [2] BOLT (1/2-13X2-IN)  
12. 1P-4579 [4] FLANGE-HALF  
  4J-0524 [2] SEAL-O-RING  
13. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
  3J-1907 [1] SEAL-O-RING  
  6V-0852 [1] CAP-DUST  
14. 8J-5914 [1] PLUG  
  2S-4078 [1] SEAL-O-RING  
15. 5P-0598 [2] CLAMP-HOSE  
16. 8T-8920 [2] BOLT (1/2-13X3.25-IN)  
17. 5V-8898 [1] ELBOW  
18. 1P-3705 [2] SEAL-RECTANGULAR  
19. 5P-2424 [2] BOLT (1/2-13X2.25-IN)  
20. 4V-1776 I [1] HOSE AS  
21. 8C-5172 [1] SEAL-RECTANGULAR  
22. 7X-0346 [4] BOLT (5/8-11X2-IN)  
23. 3V-0928 [1] PLATE  
24. 4V-1775 I [1] HOSE AS  
25. 4V-1752 [1] TUBE AS  
26. 3V-0937 [1] ELBOW  
27. 7X-0326 [2] BOLT (1/2-13X3-IN)  
28. 1P-4585 [2] FLANGE-HALF  
  2H-6338 [1] SEAL-O-RING  
29. 7X-0347 [4] BOLT (5/8-11X2.25-IN)  
30. 8T-4122 [8] WASHER-HARD (17X32X3.5-MM THK)  
31. 3V-0932 [1] TUBE AS  
32. 4V-1878 [1] HOSE  
33. 3D-2824 C [1] SEAL-O-RING  
34. 6E-3528 CY [1] VALVE GP-BREAKER RELIEF  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Lift Arm and Cylinder Linkage - Lubricate
950F Series II Wheel Loader
Tilt Cylinder Bearings and Bucket Linkage Bearings - Lubricate
950F Series II Wheel Loader
Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Lift Cylinder
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Tilt Cylinder
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Testing and Adjusting
Lift and Tilt Cylinder Drift - Check
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Lift Cylinder - Isolation and Drift Check
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Implement Cycle Time - Check
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Tilt Cylinder - Isolation and Drift Check
950F Wheel Loader and 950F Series II Wheel Loader Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Troubleshooting Procedure For Excessive Lift And Tilt Cylinder Drift{5102,5104,5143,7569}
1996/06/03
Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562}
1996/08/12
Pilot Valve Group Available To Reduce Drift Related Problems In The Lift And Tilt Cylinders {5143,5102,5104}
1997/11/24
Torque Increased For Locknut That Retains Piston In Tilt Cylinder To Ensure Retention Of Piston{5104}
1998/04/20
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
New Seals and Backup Rings for Hydraulic Cylinders are Available {4303, 5102, 5104, 7562}
2001/08/06
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/07/30
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 950F II :

CYLINDER GP-LIFT
1U-1148 CYLINDER GP-LIFT
CYLINDER GP-LIFT
1U-1147 CYLINDER GP-LIFT
CYLINDER & SEAL GP-TILT
3V-0136 CYLINDER & SEAL GP-TILT
CYLINDER & SEAL GP-LIFT
7V-5517 CYLINDER & SEAL GP-LIFT
CYLINDER & SEAL GP-LIFT
7V-5516 CYLINDER & SEAL GP-LIFT
9U-1827 CONTROL AR-RIDE
CARTRIDGE GP-VANE PUMP
6E-2396 CARTRIDGE GP-VANE PUMP
CARTRIDGE GP-VANE PUMP
4T-2626 CARTRIDGE GP-VANE PUMP
CYLINDER GP-TILT
3G-8786 CYLINDER GP-TILT
9U-1821 HYDRAULIC AR
9U-1832 HYDRAULIC AR
9U-4773 HYDRAULIC AR
KICKOUT & POSITIONER GP
9C-9750 KICKOUT & POSITIONER GP
LINES GP-FRONT
112-7920 LINES GP-FRONT
LINES GP-FRONT
112-7920 LINES GP-FRONT
LINES GP-FRONT
8R-3547 LINES GP-FRONT

Truck sale:

Caterpillar 950F II
 
Caterpillar 950F II
- Wheel loaders
FINNING CANADA
 
46.000 
Caterpillar 950FII, Radlader, Bau-Und Bergbauausrüstung
- Wheel loaders
ZIEGLER CAT
 
34,500 
Caterpillar 950FII, Construction
- Wheel Loaders

 
48,000 
Caterpillar 950FII, Construction
- Wheel Loaders
WESTERN STATES EQUIPMENT
Caterpillar 950FII, Construction
31,500 
Caterpillar 950FII, Construction
- Wheel Loaders
MICHIGAN CAT
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.