AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

113-7273 ADAPTER GP-POWER TAKE-OFF S/N 4KK1000-UP PART OF 113-7284 CONFIGURATION AR-PTO READY, 113-7282 CONFIGURATION AR-WITHOUT PTO 75C


DRAWBAR, THREE POINT HITCH AND PTO
POWER TAKE-OFF GP
CONTROL GP
COUPLER GP-QUICK
DRAWBAR GP
DRIVE GP-POWER TAKE-OFF
FRAME AND BODY
DRAWBAR GP
DRAWBAR, THREE POINT HITCH AND PTO
HITCH AR

CHALLENGER 75C CHALLENGER 4KK
 Challenger 75C Agricultural Tractor 4KK01000-UP (MACHINE) POWERED BY 3176 Engine SEBP2318 75C 4KK   (1991)

DRAWBAR, THREE POINT HITCH AND PTO

POWER TAKE-OFF GP
113-7273 ADAPTER GP-POWER TAKE-OFF
122-0539 KIT-POWER TAKE-OFF
134-6747 KIT-POWER TAKE-OFF
MOUNTING GP-POWER TAKE-OFF
9U-1674 MOUNTING GP-POWER TAKE-OFF
MOUNTING GP-POWER TAKE-OFF
113-7271 MOUNTING GP-POWER TAKE-OFF
9U-3370 POWER TAKE-OFF AR
113-7283 POWER TAKE-OFF AR
POWER TAKE-OFF GP
3W-5020 POWER TAKE-OFF GP
POWER TAKE-OFF GP
136-0504 POWER TAKE-OFF GP
SHAFT GP-POWER TAKE-OFF
3W-5101 SHAFT GP-POWER TAKE-OFF
 

#SEBP23180370
 

113-7273: ADAPTER GP-POWER TAKE-OFF

113-7273 ADAPTER GP-POWER TAKE-OFF
S/N 4KK1000-UP
PART OF 113-7284 CONFIGURATION AR-PTO READY, 113-7282 CONFIGURATION AR-WITHOUT PTO
i00478696 SEBP2318
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  101-7901 [1] ANGLE AS  
  1F-0748 [1] NUT-WELD (1/2-13-THD)  
  1D-4569 [2] BOLT (1/2-13X4.25-IN)  
  0S-1573 [1] BOLT (1/2-13X4-IN)  
  5P-2228 [1] BOLT (1/2-13X1-IN)  
  4F-8711 [1] PLUG-BUTTON (39.69MM DIA)  
  1N-5998 [1] PLUG (1 7/8-12 THD)  
  6S-8224 [4] PLUG-PROTECTION  
  6K-6307 [1] SEAL-O-RING (43.69MM ID)  
  8V-9708 [1] SPACER (14.3X25.4X35-MM THK)  
  5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP23180371
 

9U-1676: CONTROL & MOUNTING GP

9U-1676 CONTROL & MOUNTING GP
S/N 4KK1000-1983
PART OF 7I-3412 CAB GP, 9U-3283 HITCH AR-3 POINT
i00438641 SEBP2318
9U1676 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7706 Y [1] CONTROL GP-ELECTRONIC (ROTARY POSITION SENSOR)  
2. 102-9857 [1] CONTROL GP-ELECTRONIC (UNDERSPEED DRAFT)  
3. 3W-6763 [1] PLATE  
4. 6V-8837 M [3] BOLT (M6X1X16-MM)  
5. 8T-4205 [9] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 9G-2795 [1] SWITCH AS-ROLLER (THROTTLE)  
7. 9X-0199 [1] BOOT-SWITCH  
8. 6V-8370 [1] NUT-HEX (3/4-32-THD)  
  2H-3922 [1] LOCKWASHER  
9. 6V-8363 [2] SCREW (10-32X0.312-IN)  
10. 8F-1434 [2] LOCKWASHER  
11. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
12. 6V-7357 M [1] BOLT (M6X1X25-MM)  
13. 6V-8187 [2] NUT (1/4-28-THD)  
14. 6V-8185 [2] NUT (1/4-20-THD)  
15. 5R-1341 [1] ROD-CONTROL  
16. 5G-9896 [2] SPACER  
17. 6L-7751 [2] ROD END  
18. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
19. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
20. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
21. 4W-3940 [1] SPRING  
22. 6D-0679 [1] KNOB  
23. 3W-6759 [1] LEVER  
24. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
25. 9U-3196 [1] HARNESS AS  
26. 8G-1119 [1] DISC  
27. 7B-1756 [1] LOCKNUT  
28. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
29. 9K-6540 [6] WASHER-SPRING (0.63X1.25X0.04-IN THK)  
30. 3S-2093 [5] STRAP-CABLE  
31. 3W-6756 [1] KNOB  
32. 4D-8123 [1] CLIP  
33. 3E-7746 [1] SWITCH AS-ROCKER (DRAFT CONTROL)  
34. 3E-7745 [1] SWITCH AS-ROCKER (HOOK-UP)  
35. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
36. 3W-6760 [1] SUPPORT AS  
37. 8H-9189 [1] DOWEL  
38. 3W-6761 [1] STUD  
39. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 5P-6419 [1] GROMMET  
41. 3W-6757 [1] PLATE AS  
42. 9V-7451 [1] NUT-WELD (1/4-20-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23180372
 

9U-1676: CONTROL & MOUNTING GP

9U-1676 CONTROL & MOUNTING GP
S/N 4KK1984-2303
PART OF 124-6677, 7I-3412 CAB GP, 9U-3283 HITCH AR-3 POINT
i00438648 SEBP2318
9U1676 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7706 Y [1] CONTROL GP-ELECTRONIC (ROTARY POSITION SENSOR)  
2. 111-0530 C [1] CONTROL GP-ELECTRONIC (AG HITCH CONTROL)  
3. 3W-6763 [1] PLATE  
4. 8T-8908 C [3] BOLT (1/4-20X1-IN)  
5. 8T-4205 C [12] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 9G-2795 [1] SWITCH AS-ROLLER (THROTTLE)  
7. 9X-0199 [1] BOOT-SWITCH  
8. 6V-8370 [1] NUT-HEX (3/4-32-THD)  
  2H-3922 [1] LOCKWASHER  
9. 6V-8363 [2] SCREW (10-32X0.312-IN)  
10. 8F-1434 [2] LOCKWASHER  
11. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
12. 6V-7357 M [1] BOLT (M6X1X25-MM)  
13. 6V-8187 [2] NUT (1/4-28-THD)  
14. 6V-8185 C [5] NUT (1/4-20-THD)  
15. 5R-1341 [1] ROD-CONTROL  
16. 5G-9896 [2] SPACER  
17. 6L-7751 [2] ROD END  
18. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
19. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
20. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
21. 4W-3940 [1] SPRING  
22. 6D-0679 [1] KNOB  
23. 3W-6759 [1] LEVER  
24. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
25. 9U-3196 [1] HARNESS AS  
26. 8G-1119 [1] DISC  
27. 7B-1756 [1] LOCKNUT  
28. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
29. 9K-6540 [6] WASHER-SPRING (0.63X1.25X0.04-IN THK)  
30. 3S-2093 [5] STRAP-CABLE  
31. 3W-6756 [1] KNOB  
32. 4D-8123 [1] CLIP  
33. 3E-7746 [1] SWITCH AS-ROCKER (DRAFT CONTROL)  
34. 3E-7745 [1] SWITCH AS-ROCKER (HOOK UP)  
35. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
36. 3W-6760 [1] SUPPORT AS  
37. 8H-9189 [1] DOWEL  
38. 3W-6761 [1] STUD  
39. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 5P-6419 [1] GROMMET  
41. 3W-6757 [1] PLATE AS  
42. 9V-7451 [1] NUT-WELD (1/4-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23180373
 

9U-1676: CONTROL & MOUNTING GP

9U-1676 CONTROL & MOUNTING GP
S/N 4KK2304-UP
PART OF 124-6677, 7I-3412 CAB GP, 9U-3283 HITCH AR-3 POINT
i00438652 SEBP2318
9U1676 CONTROL & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7706 Y [1] CONTROL GP-ELECTRONIC (ROTARY POSITION SENSOR)  
2. 127-8378 C [1] CONTROL GP-ELECTRONIC (AG HITCH CONTROL)  
3. 3W-6763 [1] PLATE  
4. 8T-8908 [3] BOLT (1/4-20X1-IN)  
5. 8T-4205 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
6. 129-6466 [1] SWITCH AS-ROLLER (THROTTLE)  
7. 9X-0199 [1] BOOT-SWITCH  
8. 6V-8370 [1] NUT-HEX (3/4-32-THD)  
  2H-3922 [1] LOCKWASHER  
9. 6V-8363 [2] SCREW (10-32X0.312-IN)  
10. 8F-1434 [2] LOCKWASHER  
11. 9B-7237 [2] BOLT (3/8-16X1.25-IN)  
12. 6V-7357 M [1] BOLT (M6X1X25-MM)  
13. 6V-8187 [2] NUT (1/4-28-THD)  
14. 6V-8185 [5] NUT (1/4-20-THD)  
15. 5R-1341 [1] ROD-CONTROL  
16. 5G-9896 [2] SPACER  
17. 6L-7751 [2] ROD END  
18. 8T-9368 [1] BOLT (1/4-20X2.25-IN)  
19. 5P-2675 [1] BOLT (1/4-20X1.75-IN)  
20. 6V-7646 [2] WASHER-HARD (7.2X25X2-MM THK)  
21. 4W-3940 [1] SPRING  
22. 6D-0679 [1] KNOB  
23. 3W-6759 [1] LEVER  
24. 6V-8183 [1] NUT-FULL (3/8-24-THD)  
25. 9U-3196 [1] HARNESS AS  
26. 8G-1119 [1] DISC  
27. 7B-1756 [1] LOCKNUT  
28. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
29. 9K-6540 [6] WASHER-SPRING (0.63X1.25X0.04-IN THK)  
30. 3S-2093 [5] STRAP-CABLE  
31. 3W-6756 [1] KNOB  
32. 4D-8123 [1] CLIP  
33. 3E-7746 [1] SWITCH AS-ROCKER (DRAFT CONTROL)  
34. 3E-7745 [1] SWITCH AS-ROCKER (HOOK UP)  
35. 2D-6235 [1] LOCKNUT (1/4-20-THD)  
36. 3W-6760 [1] SUPPORT AS  
37. 8H-9189 [1] DOWEL  
38. 3W-6761 [1] STUD  
39. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
40. 5P-6419 [1] GROMMET  
41. 3W-6757 [1] PLATE AS  
42. 9V-7451 [1] NUT-WELD (1/4-20-THD)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23180374
 

104-3055: COUPLER GP-QUICK

104-3055 COUPLER GP-QUICK
S/N 4KK1000-2404
PART OF 113-7288, 124-4799 HITCH AR, 9U-3283 HITCH AR-3 POINT, 122-0543 KIT-3-POINT HITCH
i00472583 SEBP2318
1043055 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3463 [1] FRAME AS-COUPLER  
2. 104-3464 [2] PLATE AS  
3. 104-3465 [2] PIN AS  
4. 4E-7097 [1] PIN AS  
5. 104-3467 [2] LEVER AS  
6. 104-3471 [1] HOOK AS (CATEGORY III)  
7. 104-3472 [1] HOOK AS (CATEGORY IV)  
8. 104-3473 [2] ROD AS  
9. 1A-9252 [2] END-ADJUSTMENT ROD  
10. 6J-0208 [2] SPRING  
11. 3J-2801 [4] BOLT-PLOW  
12. 5P-8250 [4] WASHER (28X49X5-MM THK)  
13. 6K-3632 [4] LOCKNUT (1-8-THD)  
14. 6J-3335 [2] PIN  
15. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 3B-4617 [4] PIN-COTTER  
17. 5P-8248 [5] WASHER-HARD (20X36.5X3.5-MM THK)  
18. 3K-5601 [2] PIN-CLEVIS  
19. 1D-4615 [4] BOLT (3/4-10X5.5-IN)  
20. 0S-1626 [1] BOLT (3/4-10X1.5-IN)  
21. 7H-2069 [2] BOLT (3/4-10X1-IN)  
22. 104-3466 [2] BUSHING  
23. 1K-6870 [4] LOCKNUT (3/4-10-THD)  
24. 4D-4064 [2] ROD END (3/8-24-THD)  
25. 9L-7712 [2] NUT (3/8-24-THD)  
26. 105-3807 [2] SPACER  
27. 8C-4399 [1] FILM-WARNING (IMPROPERLY COUPLED IMPL)  
28. 5P-6652 [2] WASHER (20X44.5X6-MM THK)  
29. 107-0590 [1] SPACER (19.43X24.51X19.05-MM THK)  
 

#SEBP23180375
 

104-3055: COUPLER GP-QUICK

104-3055 COUPLER GP-QUICK
S/N 4KK2405-UP
PART OF 113-7288, 124-4799 HITCH AR, 9U-3283 HITCH AR-3 POINT, 122-0543 KIT-3-POINT HITCH
i00472585 SEBP2318
1043055 COUPLER GP-QUICK Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 104-3463 [1] FRAME AS-COUPLER  
2. 124-6644 [2] PLATE AS  
3. 104-3465 [2] PIN AS  
4. 133-4285 [1] PIN AS  
5. 104-3467 [2] LEVER AS  
6. 104-3471 [1] HOOK AS (CATEGORY III)  
7. 104-3472 [1] HOOK AS (CATEGORY IV)  
8. 133-4287 [2] ROD AS  
9. 107-0590 [1] SPACER (19.43X24.51X19.05MM THK)  
10. 6J-0208 [2] SPRING  
11. 3J-2801 [4] BOLT-PLOW  
12. 5P-8250 [4] WASHER (28X49X5MM THK)  
13. 6K-3632 [4] LOCKNUT  
14. 6J-3335 [2] PIN  
15. 5M-2894 [6] WASHER-HARD (10.2X18.5X2.5MM THK)  
16. 3B-4617 [4] PIN-COTTER  
17. 5P-8248 [5] WASHER-HARD (20X36.5X3.5MM THK)  
18. 1A-8827 [2] PIN  
19. 1D-4615 [4] BOLT (3/4-10X5.5 IN)  
20. 0S-1626 [1] BOLT (3/4-10X1.5IN)  
21. 7H-2069 [2] BOLT (3/4-10X1IN)  
22. 104-3466 [2] BUSHING  
23. 1K-6870 [4] LOCKNUT (3/4-10 THD)  
24. 5P-6652 [2] WASHER (20X44.5X6MM THK)  
 

#SEBP23180376
 

9U-1695: DRAWBAR GP-SWINGING

9U-1695 DRAWBAR GP-SWINGING
S/N 4KK1000-2393
PART OF 113-7260 CHASSIS AR, 117-6153 CONFIGURATION AR-WITHOUT HITCH, 124-4799 HITCH AR
i00438802 SEBP2318
9U1695 DRAWBAR GP-SWINGING Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7X-0347 [2] BOLT (5/8-11X2.25-IN)  
  3K-2889 [2] LOCKNUT (5/8-11-THD)  
2. 3F-3442 [1] DOWEL  
3. 3W-6116 [1] PIN  
4. 7B-0863 [2] LATCH-PIN  
5. 3B-2968 [4] BOLT (3/4-10X3.5-IN)  
6. 5P-8248 [4] WASHER-HARD (20X36.5X3.5-MM THK)  
7. 119-6204 [1] PLATE  
8. 9U-3817 [1] PLATE-WEAR (BOT.DRAWBAR HAMMER STRAP)  
9. 125-6370 [1] DRAWBAR AS  
10. 3W-6121 [1] PIN AS  
11. 8T-9398 [1] BOLT (3/4-10X1.75-IN)  
  7X-0564 [1] WASHER-HARD (20X51X3-MM THK)  
12. 9K-9731 [1] SPACER (20.4X28.5X14.2-MM THK)  
13. 4M-4649 [2] PLATE-LOCK  
14. 4L-6454 [4] BOLT (3/8-16X1-IN)  
  8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 106-3677 [1] PIN (DRAWBAR)  
16. 3W-7254 [1] SPACER (47X80X20-MM THK)  
 

#SEBP23180377
 

7T-3000: DRIVE GP-POWER TAKE-OFF

7T-3000 DRIVE GP-POWER TAKE-OFF
S/N 4KK1000-UP; 3GX770-UP
PART OF 134-6747 KIT-POWER TAKE-OFF, 9U-3370 POWER TAKE-OFF AR, 9U-8840 TRANSMISSION AR
i00422065 SEBP2318
7T3000 DRIVE GP-POWER TAKE-OFF Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1558 [1] BOLT (1/2-20X3.25-IN)  
2. 1P-6563 [1] WASHER-RETAINING (0.531X2.559X0.48-IN THK)  
3. 7T-3063 [1] YOKE AS  
4. 3K-0196 [1] GUARD  
5. 1J-6472 [1] RING-RETAINING  
6. 1T-0043 [1] BALL BEARING  
7. 9H-6079 [1] SEAL-LIP TYPE  
8. 0S-1594 [7] BOLT (3/8-16X1-IN)  
9. 7T-3061 [1] HOUSING-CLUTCH  
10. 8M-4435 [1] SEAL-O-RING  
11. 2M-9780 [1] SEAL-O-RING  
12. 9S-4190 [1] PLUG-O RING  
13. 8P-4922 [3] RING-SEAL  
14. 7T-3058 [1] RING-SEAL  
15. 0S-1590 [2] BOLT (3/8-16X2-IN)  
16. 1T-0132 [1] SEAL-O-RING  
17. 5P-8191 C [3] RING-RETAINING  
18. 7T-3062 [1] MANIFOLD-CLUTCH  
19. 7T-3067 [1] RING-SEAL  
20. 6Y-7981 [8] DISC-FRICTION  
21. 7T-3057 [1] PISTON-CLUTCH  
22. 3P-1608 [1] RING-RETAINING  
23. 3P-0337 [6] PLATE-CLUTCH  
24. 3P-0335 [1] PLATE-CLUTCH PRESSURE  
25. 4M-9592 [10] SPRING  
26. 7T-3059 [1] HUB-CLUTCH  
27. 1T-0795 [1] RING-RETAINING  
28. 5D-1921 [1] RING-RETAINING  
29. 7T-3055 [1] SHAFT AS  
30. 3S-2938 [1] BEARING-SLEEVE  
31. 7T-3056 [1] HUB-CLUTCH  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP23180378
 

3W-5023: FRAME GP-DRAWBAR

3W-5023 FRAME GP-DRAWBAR
S/N 4KK1000-UP
PART OF 113-7287, 117-6153 CONFIGURATION AR-WITHOUT HITCH
i00365855 SEBP2318
3W5023 FRAME GP-DRAWBAR Parts scheme
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3W-6125 [1] SUPPORT AS  
2. 8T-9400 C [12] BOLT (7/8-9X2.5-IN)  
3. 8C-6913 C [12] WASHER-HARD (24X41.5X4-MM THK)  
4. 5M-3062 [4] BOLT (3/8-16X0.75-IN)  
5. 8T-4896 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
6. 6K-1510 [2] STOP  
7. 125-5542 [1] PLATE-WEAR  
8. 4L-8183 [2] SPACER (0.656X1.125X0.38-IN THK)  
9. 7X-0515 [2] WASHER-HARD (17X35X5-MM THK)  
10. 8T-9393 [2] BOLT (5/8-11X1.5-IN)  
11. 6S-8224 [4] PLUG-PROTECTION  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP23180379
 

113-7288: HITCH AR

113-7288 HITCH AR
S/N 4KK1000-UP
i00478763 SEBP2318
  For full view, you need register

Parts for your 75C CHALLENGER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7I-3412 Y [1] CAB GP  
  9T-9517 Y [2] CYLINDER GP-LIFT (HITCH)  
  113-7308 Y [1] HITCH GP-3 POINT  
  104-3055 Y [1] COUPLER GP-QUICK  
  108-2365 Y [1] VALVE GP-BANK  
  7I-3410 Y [1] WIRING GP-3 POINT HITCH  
  113-7309 Y [1] LINES GP-HYDRAULIC  
  8T-5005 M [2] BOLT (M10X1.5X70-MM)  
  8C-4977 [1] FILM-WARNING (HITCH CONT IN HOOK-UP MODE)  
  8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 75C :

113-7275 ADAPTER GP-3 POINT HITCH
VALVE GP-SOLENOID
100-3915 VALVE GP-SOLENOID
VALVE GP-RELIEF
103-5460 VALVE GP-RELIEF
VALVE GP-RELIEF
9T-1819 VALVE GP-RELIEF
VALVE GP-PUMP CONTROL
126-2754 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
126-2712 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
108-0391 VALVE GP-PUMP CONTROL
VALVE GP-PUMP CONTROL
101-0971 VALVE GP-PUMP CONTROL
CONTROL & MOUNTING GP
9U-1676 CONTROL & MOUNTING GP
CONTROL & MOUNTING GP
9U-1676 CONTROL & MOUNTING GP
CONTROL & MOUNTING GP
9U-1676 CONTROL & MOUNTING GP
COUPLER GP-QUICK
104-3055 COUPLER GP-QUICK
COUPLER GP-QUICK
104-3055 COUPLER GP-QUICK
DRAWBAR GP-SWINGING
9U-1695 DRAWBAR GP-SWINGING
DRIVE GP-POWER TAKE-OFF
7T-3000 DRIVE GP-POWER TAKE-OFF
FRAME GP-DRAWBAR
3W-5023 FRAME GP-DRAWBAR

Truck sale:

 
25,434 
Caterpillar 75C, Agriculture
- tractors
ZIEGLER AG EQUIPMENT
CATERPILLAR 75C 1994
 
CATERPILLAR 75C 1994
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
 
$30,655 USD 
CATERPILLAR 75C 1993
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
 
 
CATERPILLAR 75C 1994
- AG TRACTORS
WAGNER EQUIPMENT CO
United States
 
$43,500 USD 
CATERPILLAR 75C 1993
- AG TRACTORS
ZIEGLER AG EQUIPMENT
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.