AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

297-6382 KIT-GASKET -WATER PUMP S/N 1KM1-2508 FIELD INSTALLATION 938F WHEEL LOADER


SERVICE EQUIPMENT AND SUPPLIES
GASKET & SEAL KITS
PROTECTION GP
CHARTS & FILMS

WHEEL LOADER 938F WHEEL LOADER 1KM
 938F Wheel Loader 1KM00001-02508 (MACHINE) POWERED BY 3116 Engine SEBP2338 938F 1KM   (1994)

SERVICE EQUIPMENT AND SUPPLIES

GASKET & SEAL KITS
282-6648 KIT-GASKET
287-8445 KIT-GASKET
297-6382 KIT-GASKET
438-4341 KIT-GASKET
460-5395 KIT-GASKET
468-8082 KIT-GASKET
 

#SEBP23380610
 

297-6382: KIT-GASKET

297-6382 KIT-GASKET -WATER PUMP
S/N 1KM1-2508
FIELD INSTALLATION
i06844802 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1J-9671 [1] SEAL-O-RING  
  2M-4453 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  4J-0524 [1] SEAL-O-RING  
 

#SEBP23380611
 

438-4341: KIT-GASKET

438-4341 KIT-GASKET
S/N 1KM1-2508
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE AND ATTACHING LINES.
FIELD INSTALLATION
i05817140 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-7057 [1] GASKET  
  240-2767 [1] GASKET  
  300-7933 [1] GASKET (ENGINE OIL FILTER BASE)  
  214-7568 [1] SEAL-O-RING  
  228-7089 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3J-1907 [1] SEAL-O-RING  
  3P-1156 [2] SEAL-O-RING  
  6V-8397 [1] SEAL-O-RING  
  238-5081 [2] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT
   
    HTTPS://DEALER.CAT.COM/RELATED
 

#SEBP23380612
 

460-5395: KIT-GASKET

460-5395 KIT-GASKET -SINGLE CYLINDER HEAD
S/N 1KM1-2508
KIT CONTAINS THE GASKETS, SEAL & BENDABLE LOCKS TO REBUILD & REINSTALL A SINGLE CYLINDER HEAD.. INCLUDES THE TURBO GASKETS, KIT DOES NOT INCLUDES THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED.
OPTIONAL FIELD REPLACEMENT ORDER 436-8395 KIT-GASKET
FOR USE WITH @@@@@133-8829@@@@@
FIELD INSTALLATION
i06220383 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-7057 [1] GASKET  
  7C-1152 [1] GASKET  
  7C-1159 [1] GASKET  
  7C-7431 [1] GASKET  
  7W-2398 [1] GASKET (OIL DRAIN)  
  107-7832 [1] GASKET  
  113-6200 [3] GASKET  
  113-6250 [1] GASKET  
  119-2940 [1] GASKET (VALVE COVER)  
  125-8842 [1] GASKET  
  2W-7212 [1] GASKET-WATER REGULATOR  
  195-7339 [1] GASKET-WATER REGULATOR  
  156-0235 [6] LOCK  
  7E-0844 [1] SEAL  
  1J-9671 [3] SEAL-O-RING  
  2J-0157 [1] SEAL-O-RING  
  2M-9780 [1] SEAL-O-RING  
  3J-1907 [9] SEAL-O-RING  
  3J-7354 [2] SEAL-O-RING  
  3K-0360 [4] SEAL-O-RING  
  4J-5477 [2] SEAL-O-RING  
  5F-7054 [1] SEAL-O-RING  
  6F-6673 [1] SEAL-O-RING  
  6V-8397 [7] SEAL-O-RING  
  8H-2046 [1] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  5P-7813 [1] SEAL-O-RING  
  418-6781 M [4] STUD-TAPERLOCK (M10X1.5X40-MM)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP23380613
 

468-8082: KIT-GASKET

468-8082 KIT-GASKET -CENTRAL, LOWER STRUCTURE
S/N 1KM1-2508
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS
FOR USE WITH @@@@@133-8829@@@@@, @@@@@133-8829@@@@@
FIELD INSTALLATION
i06091675 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  4Y-9652 [3] GASKET  
  7C-0358 [1] GASKET  
  7W-5340 [1] GASKET  
  7C-1159 [1] GASKET  
  261-3816 [1] GASKET-OIL PAN (ENGINE)  
  4F-9029 [1] SEAL  
  2M-9780 [1] SEAL-O-RING  
  3D-2824 [2] SEAL-O-RING  
  3J-1907 [3] SEAL-O-RING  
  3K-0360 [2] SEAL-O-RING  
  169-7487 [1] SEAL-O-RING  
  3P-1156 [2] SEAL-O-RING  
  4F-7391 [1] SEAL-O-RING  
  4F-9653 [1] SEAL-O-RING  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
 

#SEBP23380614
 

498-2469: KIT-GASKET

498-2469 KIT-GASKET
S/N 1KM1-2508
CONTAINS THE GASKETS, SEALS, AND BENDABLE LOCKS TO REBUILD AND REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS, BUT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT, AS NEEDED. FOR IN-LINE 4 AND 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. TURBO MOUNTING HARDWARE WILL BE INCLUDED
FOR USE WITH @@@@@133-8830@@@@@
FIELD INSTALLATION
i06737729 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  1S-7057 [1] GASKET  
  7C-1152 [1] GASKET  
  7C-1159 [1] GASKET  
  7C-7431 [1] GASKET  
  7W-2398 [1] GASKET (OIL DRAIN)  
  107-7832 [1] GASKET  
  113-6200 [3] GASKET  
  113-6250 [1] GASKET  
  119-2940 [1] GASKET (VALVE COVER)  
  125-8842 [1] GASKET  
  2W-7212 [1] GASKET-WATER REGULATOR  
  195-7339 [1] GASKET-WATER REGULATOR  
  375-2467 M [4] LOCKNUT-FLANGE (M10X1.5-THD)  
  7E-0844 [1] SEAL  
  1J-9671 [3] SEAL-O-RING  
  3D-2824 [1] SEAL-O-RING  
  3J-1907 [15] SEAL-O-RING  
  3J-7354 [1] SEAL-O-RING  
  3K-0360 [5] SEAL-O-RING  
  5F-7054 [1] SEAL-O-RING  
  5P-7813 [1] SEAL-O-RING  
  6F-6673 [1] SEAL-O-RING  
  6V-8397 [9] SEAL-O-RING  
  9M-4849 [1] SEAL-O-RING  
  418-6781 M [4] STUD-TAPERLOCK (M10X1.5X40-MM)  
   
    FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT
   
    HTTP://DEALER.CAT.COM/RELATED
  M   METRIC PART
 

#SEBP23380615
 

103-5781: LOCK GP-VANDALISM

103-5781 LOCK GP-VANDALISM
S/N 1KM1-1799
AN ATTACHMENT
i00171067 SEBP2338
1035781 LOCK GP-VANDALISM Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8502 [5] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
2. 6V-5874 [7] COVER  
3. 7K-5636 Y [1] COVER GP-XMSN OIL FILLER CAP  
4. 9G-9288 Y [1] CAP GP-PROTECTION  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP23380616
 

103-5781: LOCK GP-VANDALISM

103-5781 LOCK GP-VANDALISM
S/N 1KM1800-2508
AN ATTACHMENT
i00171068 SEBP2338
1035781 LOCK GP-VANDALISM Parts scheme
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8502 [5] PADLOCK GP  
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
2. 9G-9288 Y [1] CAP GP-PROTECTION  
3. 7K-5636 Y [1] COVER GP-XMSN OIL FILLER CAP  
  A   NOT PART OF THIS GROUP
  Y   SEPARATE ILLUSTRATION
 

#SEBP23380617
 

102-9476: PLATE & FILM GP

102-9476 PLATE & FILM GP
S/N 1KM1-2508
PART OF 101-8791 CHASSIS AR
i00171039 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  Y [1] FILM GP  
  5P-1175 [1] FILM-IDENTIFICATION (ENGINE OIL FILL)  
    TO CRANKCASE OIL FILLER CAP
  4P-6379 [1] FILM-IDENTIFICATION (FUEL FILTER)  
    ON FUEL FILTER
  4P-8681 [1] FILM-IDENTIFICATION (ENGINE OIL FILTER)  
    ON OIL FILTER
  134-7258 [1] FILM-INFORMATION (EXTENDED LIFE COOLANT)  
    ON BACK SIDE OF THE ACCESS DOOR OF THE RADIATOR NEXT TO THE FILL CAP
  9X-8372 [1] FILM-INSTRUCTION (WASHER FILL)  
    ON LEFT SIDE SHROUD BELOW WINDSHIELD WIPER FLUID FILLER SPOUT
  7X-3229 [4] FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)  
    ONE EACH AT REAR LIFT & TIEDOWN EYES AND ONE EACH AT FRONT LIFT & TIEDOWN EYES
  1S-6636 [1] FILM-PATENT  
    ON REAR FACE OF LOADER FRAME TOWER
  6V-4611 [1] FILM-WARNING (JUMP START, READ OMM)  
    INSIDE BATTERY BOX DOOR
  107-9259 [1] PLATE-WARNING-ROPS/FOPS  
    ON LH SIDE OF CAB BELOW RECESSED GRAB HANDLE IN HOLES PROVIDED. USE SCREW DRIVE.
  5P-7244 [2] PLATE-WARNING (NO CLEARANCE)  
    ON SIDEFACE OF LOADER FRAME-EACH SIDE
  5P-8197 [1] PLATE-WARNING (READ OMM)  
    ON RH AIR RECIRCULATION HOUSING. ENCLOSED CAB ONLY.
  8T-1191 [1] PLATE-WARNING (HAZARD, READ OMM)  
    ON RH SIDE OF DASH
  4S-8264 [4] RIVET-POP  
  4B-4158 [4] SCREW-DRIVE (NO 4X0.25-IN)  
  9X-6562 [4] TACK  
  096-5962 [4] WASHER-HARD (3.4X7X0.8-MM THK)  
    ON RH AIR RECIRCULATION HOUSING. ENCLOSED CAB ONLY.
  Y   SEPARATE ILLUSTRATION
 

#SEBP23380618
 

7C-7301: PLATE & FILM GP

7C-7301 PLATE & FILM GP
S/N 98Z17000-99999
PART OF 108-1828, 133-8829, 133-8830 ENGINE AR
ALSO AN ATTACHMENT
i00122277 SEBP2338
  For full view, you need register

Parts for your 938F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  [1] PLATE-SERIAL NUMBER (ENGINE)  
    (ON LOWER RH SIDE OF CYLINDER BLOCK)
  8S-8158 [2] SEAL-WIRE  
 

Information:

Truck Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2002/12/01
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/31
Engine News
The Color of Certain O-Ring Seals Is Changing {7555}
2003/01/01
The 1U-8846 Gasket Sealant Is Cancelled {7555}
2010/03/22
Special Instruction
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Using the 1U-7598 Seal Installation Group To Install 115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
115-4109 (Dry) and 115-4120 (Wet) Crankshaft Seals{1160, 1161}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installing Crankshaft Seals And Wear Sleeves Using The Former 9S8868, 9S8873, 9S8881 And 9S8888 Tools Groups{1160, 1161, 0704}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1160, 1161}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Crankshaft Seal And Wear Sleeve Installation{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Installation Of Seal Groups With Hydrodynamic Grooves In The Seal Lip{1160, 1161}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Lip Type Seals {0599, 0733, 5050, 7555}
Technical Information Bulletin
Correct Packaging Of Transmission Rotating Seals
Correct Packaging Of Transmission Rotating Seals
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Caterpillar O-rings: Measuring Tool, Material Application, and Dash Size Cross Reference{0374, 0599, 0759, 0767, 7555}
Reuse And Salvage Guidelines
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Service Magazine
6V6142 And 6V6143 Installers Can Be Used To Install Crankshaft Seals And Wear Sleeves{0622,0626,1160,1161}
1982/11/01
New Rear Crankshaft Seal Groups Available{1161}
1994/10/17
Improved 1U-7430 Front Crankshaft Seal Installer Available{1160}
1995/08/07
Improved Caterpillar O-ring Face Seals are Now Available {7555}
2000/05/08
The Color of Certain O-Ring Seals Will Change {7555}
2002/12/09
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Cylinder Head Gasket is Now Used {1100, 1124}
2008/12/29
Final Drive Duo-Cone Seal Assembly Information Update {7561}
2010/04/15
The 1U-8846 Gasket Sealant Is Canceled {7555}
2010/03/22

Caterpillar Parts SIS Catalog 938F :

287-8445 KIT-GASKET
282-6648 KIT-GASKET
196-6931 KIT-GASKET
137-6568 KIT-GASKET
FILM GP
107-9260 FILM GP
CAP GP-PROTECTION
9G-9288 CAP GP-PROTECTION
9W-8143 TIP GP-SHORT
TIP GP-SHORT
9J-3178 TIP GP-SHORT
438-4341 KIT-GASKET
460-5395 KIT-GASKET
468-8082 KIT-GASKET
498-2469 KIT-GASKET
LOCK GP-VANDALISM
103-5781 LOCK GP-VANDALISM
LOCK GP-VANDALISM
103-5781 LOCK GP-VANDALISM
102-9476 PLATE & FILM GP
7C-7301 PLATE & FILM GP

Truck sale:

Caterpillar 938F, Construction
48,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
37,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
35,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
CATERPILLAR 938F 1995
 
CATERPILLAR 938F 1995
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 938F 1994
 
CATERPILLAR 938F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.