AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

149-5403 CYLINDER BLOCK GP S/N 98Z8480-UP PART OF 7E-2482 CYLINDER BLOCK GP 960F WHEEL LOADER


BASIC ENGINE
CYLINDER BLOCK GP
CYLINDER HEAD GP

WHEEL LOADER 960F WHEEL LOADER 1YM
 960F Wheel Loader 1YM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2353 960F 1YM   (1993)

BASIC ENGINE

CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
149-5403 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
 

#SEBP23530020
 

149-5403: CYLINDER BLOCK GP

149-5403 CYLINDER BLOCK GP
S/N 98Z8480-UP
PART OF 7E-2482 CYLINDER BLOCK GP
i00907549 SEBP2353
1495403 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5402 [1] CYLINDER BLOCK AS  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
6. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
7. 2M-6471 [2] PLUG-CUP  
8. 9S-8008 B [2] PLUG (1-1/16-12-THD)  
9. 3D-2824 B [2] SEAL-O-RING  
10. 3H-5552 [1] PLUG-CUP  
11. 9S-8006 [1] PLUG (7/8-14-THD)  
12. 2M-9780 [1] SEAL-O-RING  
13. 216-5586 [1] BUSHING (CAMSHAFT)  
14. 2W-7213 [6] BUSHING (CAMSHAFT)  
15. 3K-0360 [1] SEAL-O-RING  
16. 9S-8005 [1] PLUG (3/4-16-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23530021
 

7C-5826: CYLINDER BLOCK GP

7C-5826 CYLINDER BLOCK GP
S/N 98Z5540-13709
PART OF 7E-2482 CYLINDER BLOCK GP
i00191855 SEBP2353
7C5826 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-6471 [2] PLUG-CUP  
2. 7E-2968 [7] CAP-CRANKSHAFT BEARING  
3. 9X-8916 M [14] BOLT (M16X2X140-MM)  
4. 5P-8247 [14] WASHER-HARD (17X32X3.5-MM THK)  
5. 9S-8005 [1] PLUG (3/4-16-THD)  
6. 3K-0360 [1] SEAL-O-RING  
7. 2W-7213 [6] BUSHING (CAMSHAFT)  
8. 3D-2824 [2] SEAL-O-RING  
9. 9S-8008 [2] PLUG (1-1/16-12-THD)  
10. 8T-0293 M [2] BOLT (M12X1.75X20-MM)  
11. 6F-7062 [2] WASHER (12.7X19.05X1.83-MM THK)  
12. 3H-5552 [1] PLUG-CUP  
13. 9S-8006 [1] PLUG (7/8-14-THD)  
14. 2M-9780 [1] SEAL-O-RING  
15. 2W-7211 [1] BUSHING (CAMSHAFT)  
  M   METRIC PART
 

#SEBP23530022
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 98Z5540-13709
PART OF 106-4772, 116-7960, 116-7961 ENGINE AR
FOR USE WITH TWO-PIECE PISTONS
i00191860 SEBP2353
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-5826 Y [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23530023
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 98Z13710-17019
PART OF 116-7961 ENGINE AR
FOR USE WITH TWO-PIECE PISTONS
i00191861 SEBP2353
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-4948 CY [1] CYLINDER BLOCK GP  
2. 6V-3538 [2] DOWEL  
3. 4P-5651 [6] TUBE AS-OIL JET  
4. 7N-5683 [2] DOWEL  
5. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
6. 1W-8407 [2] SLEEVE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23530024
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 98Z8480-UP
PART OF 112-9040, 116-7960, 116-7961 ENGINE AR
FOR USE WITH TWO-PIECE PISTONS
i00191862 SEBP2353
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 129-1095 YC [1] CYLINDER BLOCK GP  
2. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
3. 1W-8407 [2] SLEEVE  
4. 6V-3538 [2] DOWEL  
5. 4P-5651 [6] TUBE AS-OIL JET  
6. 7N-5683 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23530025
 

7E-2482: CYLINDER BLOCK GP

7E-2482 CYLINDER BLOCK GP
S/N 98Z12353-99999
PART OF 112-9040, 116-7961 ENGINE AR
FOR USE WITH TWO-PIECE PISTONS
i00942163 SEBP2353
7E2482 CYLINDER BLOCK GP Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 149-5403 YC [1] CYLINDER BLOCK GP  
2. 6V-3940 M [6] BOLT (M8X1.25X25-MM)  
3. 1W-8407 [2] SLEEVE  
4. 6V-3538 [2] DOWEL  
5. 4P-5651 [6] TUBE AS-OIL JET  
6. 7N-5683 [2] DOWEL  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23530026
 

107-7609: CYLINDER HEAD AS

107-7609 CYLINDER HEAD AS
S/N 98Z7592-14171
PART OF 107-7720 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@107-7720@@@@@
i00192112 SEBP2353
1077609 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 4P-8378 [6] SEAT-VALVE  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

#SEBP23530027
 

107-7720: CYLINDER HEAD AS

107-7720 CYLINDER HEAD AS
S/N 98Z5540-14171
FIELD REPLACEMENT FOR @@@@@107-7609@@@@@
i00192114 SEBP2353
1077720 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 107-7609 Y [1] CYLINDER HEAD AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23530028
 

119-3065: CYLINDER HEAD AS

119-3065 CYLINDER HEAD AS
S/N 98Z14172-UP
PART OF 119-3067 CYLINDER HEAD AS, 4P-8263 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@119-3067@@@@@
i00126043 SEBP2353
1193065 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. Z [1] CYLINDER HEAD  
2. 1W-2713 [6] INSERT-VALVE SEAT (EXHAUST)  
3. 126-0453 [6] INSERT-VALVE SEAT (INLET)  
4. 119-3061 [6] SLEEVE  
5. 8M-5860 [6] PLUG-CUP  
  Z   NOT SERVICED SEPARATELY
 

#SEBP23530029
 

119-3067: CYLINDER HEAD AS

119-3067 CYLINDER HEAD AS
S/N 98Z14172-UP
FIELD REPLACEMENT FOR @@@@@119-3065@@@@@
i00126044 SEBP2353
1193067 CYLINDER HEAD AS Parts scheme
  For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-8848 [12] GUIDE-VALVE  
2. 9S-8003 [3] PLUG (1/2-20-THD)  
3. 1J-9671 [3] SEAL-O-RING  
4. 2M-6471 [2] PLUG-CUP  
5. 119-3036 [12] SEAL-VALVE STEM  
6. 119-3065 Y [1] CYLINDER HEAD AS  
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Using Caterpillar Cylinder Pack Pulling Tools{1239}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Use Of 8T0455 Cylinder Liner Projection Indicator Group{0760, 1216}
Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}
Installation of 7C-6208 Cylinder Sleeve {1222}
Installation of 7C-6208 Cylinder Sleeve {1222}
Usage of Cylinder Head Gaskets{1124}
Usage of Cylinder Head Gaskets{1124}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Determining the Correct Part Numbers for Main Bearings and Cylinder Head Gaskets{1124, 1201, 1203}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Reuse and Salvage for 3114, 3116, and 3126 Engine Series Cylinder Blocks {1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
3114, 3116, and 3126 Engines
Excessive Bearing Wear - Inspect
3114, 3116, and 3126 Engines
Main Bearings - Inspect
3114, 3116, and 3126 Engines
Disassembly and Assembly
Bearing Clearance - Check
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03
Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29
Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16
Reuse Of Engine Bearings{1230}
1983/05/16
Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08
New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27
Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20
Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12
New Information On Reusable Cylinder Liners{1216}
1978/06/19
Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28
New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Recommendation For Use Of A FLEX-HONE On 1100, 3100 and 3200 Series Engines {1201}
1979/09/10
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
Use Of 4C-4377 Stress Plate Group In 3114 And 3116 Cylinder Block Reconditioning{0672,0673,1201}
1994/09/05
Lubricant Used On Cylinder Head Bolts Changed{1100}
1996/02/05
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Cylinder Sleeve Available For Reconditioning Cylinder Blocks {1222}
1997/12/22
New Design of Cylinder Block and Main Bearings {1201,1203,1224}
1999/05/17
New Main Bearing Material{1203}
1999/05/24
Cat<SUP>&reg;</SUP> Reman Now Offers Additional Long Blocks for Certain Machine Engines {1000, 1201}
2015/07/10

Caterpillar Parts SIS Catalog 960F :

CYLINDER BLOCK GP
129-1095 CYLINDER BLOCK GP
CYLINDER BLOCK GP
100-4948 CYLINDER BLOCK GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
CRANKSHAFT GP
4W-2197 CRANKSHAFT GP
COVER GP-VALVE MECHANISM
4W-2172 COVER GP-VALVE MECHANISM
COVER GP-FRONT HOUSING
7L-0004 COVER GP-FRONT HOUSING
COVER GP-CYLINDER BLOCK
4P-0512 COVER GP-CYLINDER BLOCK
CARRIER GP-SEAL
4W-3462 CARRIER GP-SEAL
CYLINDER BLOCK GP
7C-5826 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER BLOCK GP
7E-2482 CYLINDER BLOCK GP
CYLINDER HEAD AS
107-7609 CYLINDER HEAD AS
CYLINDER HEAD AS
107-7720 CYLINDER HEAD AS
CYLINDER HEAD AS
119-3065 CYLINDER HEAD AS

Truck sale:

Caterpillar 960F, Construction
49,000 USD 
Caterpillar 960F, Construction
- Wheel Loaders
MILTON CAT
CATERPILLAR 960F 1994
 
CATERPILLAR 960F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
1997 CAT 960F
USD $38,000 
1997 CAT 960F

JB Earthmoving Equipment LLC
Georgia
1995 CAT 960F
USD $42,403 
1995 CAT 960F

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT 960F
USD $35,315 
1996 CAT 960F

AMMAR GENERAL TRADING
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.