8J-4954 TIP GP-SHORT S/N 1YM181-UP J-350 PART OF 4T-5225 TIP GP-SHORT 960F WHEEL LOADER

Pos.	Part No	Qty	Parts name
1.	5D-1911	[1]	COVER-HYDRAULIC CAP
2.	9M-7394	[1]	LEVER
3.	1L-5072	[1]	DOWEL
4.	5P-8502	[1]	PADLOCK GP
	5P-8500 A	[2]	KEY
	8Y-6364 A	[1]	SLEEVE
5.	2J-7761	[1]	RING-RETAINING
	A		NOT PART OF THIS GROUP

#SEBP23530574

103-1869: FILM GP

FILM GP

103-1869 FILM GP
S/N 1YM1-UP
PART OF 3E-9699 PLATE & FILM GP

i00192281 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2448	[1]	FILM-IDENTIFICATION (CATERPILLAR)
2.	101-7456	[2]	FILM-STRIPE
3.	3E-9719	[2]	FILM-STRIPE
4.	103-1861	[1]	FILM-STRIPE
5.	103-1862	[1]	FILM-STRIPE
6.	100-6493	[3]	FILM-STRIPE
7.	100-5621	[1]	FILM-IDENTIFICATION (CATERPILLAR)

#SEBP23530575

196-6931: KIT-GASKET

KIT-GASKET

196-6931 KIT-GASKET -OIL COOLER, LINES
S/N 1YM1-UP
KIT CONTAINS GASKETS AND SEALS TO ASSEMBLE AND REINSTALL THE OIL COOLERS, OIL FILTER BASE, AND ATTACHING LINES.

i05985850 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
240-2767	[1]	GASKET
300-7933	[1]	GASKET (ENGINE OIL FILTER BASE)
3J-1907	[1]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
238-5081	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP23530576

216-5359: KIT-GASKET

KIT-GASKET

216-5359 KIT-GASKET
S/N 1YM1-UP
KIT CONTAINS SEALS (EXCEPT METAL SEALS RINGS), GASKETS AND BENDABLE LOCKS TO RESEAL COMPLETE POWER SHIFT TRANSMISSION. SEALS AND GASKETS TO ATTACH VALVES, FILL TUBE, DIPSTICK, AND TRANSMISSION MOUNTING SEAL AND GASKETS
FOR USE WITH @@@@@ 8E-9832@@@@@

i06062154 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4K-5537	[1]	GASKET
8E-4925	[1]	GASKET
8E-4927	[1]	GASKET
8E-4929	[1]	GASKET
104-6730	[1]	GASKET
3P-3461	[1]	GASKET-COVER
9G-6257	[2]	GASKET-COVER
100-4083	[6]	KIT-SEAL
		(EACH INCLUDES)
3D-2824	[1]	SEAL-O-RING
8L-2746	[1]	SEAL-O-RING
033-6033	[1]	SEAL-O-RING
1T-1639	[1]	RING
6P-7772	[1]	RING-SEAL
6P-7773	[4]	RING-SEAL
6P-7985	[2]	RING-SEAL
7G-5674	[1]	RING-SEAL
7G-5675	[4]	RING-SEAL
7G-5730	[1]	RING-SEAL
7G-9224	[1]	RING-SEAL
193-2200	[2]	SEAL-LIP TYPE
1H-9696	[1]	SEAL-O-RING
2H-3088	[2]	SEAL-O-RING
2H-3927	[1]	SEAL-O-RING
2H-6184	[1]	SEAL-O-RING
2M-9780	[1]	SEAL-O-RING
3H-2652	[2]	SEAL-O-RING
3J-0634	[1]	SEAL-O-RING
3J-1907	[3]	SEAL-O-RING
4F-8824	[1]	SEAL-O-RING
4J-0521	[2]	SEAL-O-RING
5F-1678	[1]	SEAL-O-RING
5F-3144	[1]	SEAL-O-RING
5H-8853	[1]	SEAL-O-RING
5M-5860	[2]	SEAL-O-RING
5M-7329	[3]	SEAL-O-RING
6F-0711	[1]	SEAL-O-RING
6F-6673	[5]	SEAL-O-RING
6J-2419	[1]	SEAL-O-RING
6V-4365	[1]	SEAL-O-RING
7F-8268	[2]	SEAL-O-RING
7J-0204	[14]	SEAL-O-RING
7M-8485	[1]	SEAL-O-RING
7S-8554	[1]	SEAL-O-RING
8H-7521	[1]	SEAL-O-RING
8M-4432	[4]	SEAL-O-RING
8M-4986	[2]	SEAL-O-RING
8M-4992	[2]	SEAL-O-RING
9M-5024	[1]	SEAL-O-RING
061-7540	[1]	SEAL-O-RING
144-8299	[1]	SEAL-O-RING
1P-3707	[1]	SEAL-RECTANGULAR
5P-7084	[1]	SEAL-RECTANGULAR
6F-5188	[1]	SEAL-RING

#SEBP23530577

264-6903: KIT-GASKET

KIT-GASKET

264-6903 KIT-GASKET
S/N 1YM1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOS AND ATTACHING LINES.
OPTIONAL FIELD REPLACEMENT ORDER @@@@@518-3979@@@@@

i05813677 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
1S-7057	[1]	GASKET
7C-0358	[1]	GASKET
7C-7431	[1]	GASKET
7W-2398	[1]	GASKET (OIL DRAIN)
8H-9788	[1]	GASKET
188-6126	[1]	GASKET
7C-1152	[1]	GASKET
125-8842	[1]	GASKET
375-2467 M	[4]	LOCKNUT-FLANGE (M10X1.5-THD)
3J-1907	[1]	SEAL-O-RING
4F-7391	[1]	SEAL-O-RING
6V-8397	[1]	SEAL-O-RING
9M-4849	[1]	SEAL-O-RING
418-6781 M	[4]	STUD-TAPERLOCK (M10X1.5X40-MM)

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED
M		METRIC PART

#SEBP23530578

267-1414: KIT-GASKET

KIT-GASKET

267-1414 KIT-GASKET
S/N 1YM1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP, AND BLOCK COVERS.
FOR USE WITH T791G ENGINE ARRANGEMENT S/N 55K 1-UP, MACHINE S/N 9HS 1-UP

i05949087 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4Y-9652	[3]	GASKET
7C-0358	[1]	GASKET
7W-5340	[1]	GASKET
7W-2426	[1]	GASKET
261-3816	[1]	GASKET-OIL PAN (ENGINE)
2M-9780	[1]	SEAL-O-RING
3D-2824	[2]	SEAL-O-RING
3J-1907	[5]	SEAL-O-RING
3K-0360	[3]	SEAL-O-RING
3P-1156	[2]	SEAL-O-RING
4F-9653	[1]	SEAL-O-RING
4K-1388	[1]	SEAL-O-RING
3J-7354	[1]	SEAL-O-RING
4F-7391	[1]	SEAL-O-RING
5K-9090	[2]	SEAL-O-RING
8L-2786	[1]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT

		HTTP://DEALER.CAT.COM/RELATED

#SEBP23530579

288-0554: KIT-GASKET

KIT-GASKET

288-0554 KIT-GASKET -FRONT STRUCTURE
S/N 1YM1-UP
CONTAINS GASKETS, SEAL, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET.

i06203598 SEBP2353

For full view, you need register

Parts for your 960F WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
4R-9999	[1]	EXCLUDER-CRANKSHAFT SEAL
7W-6552	[1]	GASKET
7E-0844	[1]	SEAL
245-7339	[1]	SEAL-CRANKSHAFT (FRONT)
135-9819	[1]	SEAL-INTEGRAL
2J-0157	[1]	SEAL-O-RING
2M-9780	[1]	SEAL-O-RING
3K-0360	[1]	SEAL-O-RING
1T-1068	[1]	SEAL-O-RING
3D-2824	[1]	SEAL-O-RING
3J-1907	[2]	SEAL-O-RING
6F-6673	[1]	SEAL-O-RING
6V-8397	[2]	SEAL-O-RING
6V-9746	[2]	SEAL-O-RING

		FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD IN ADDITION TO THE KIT CONSIST, PLEASE VISIT

		HTTPS://DEALER.CAT.COM/RELATED

Information:

WORK TOOLS

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}

Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}
Installation of Mechanically Attached Sidebar Protectors on Loader Bucket{6101, 6102, 6817}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat<SUP>®</SUP> Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat<SUP>®</SUP> Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Specifications

Wear Plates, Bit, Cutting Edge And Tooth Groups
960F WHEEL LOADER HYDRAULIC SYSTEM

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

Filter Retainer Pilot Diameter Changed To Better Fit End Caps Of Hydraulic Filters {5068}
1996/10/14

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2006/02/06

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}
New K Series GET Tips are Now Available for Certain Excavators and Wheel Loaders Buckets {6800, 6805}

Caterpillar Parts SIS Catalog 960F :

254-5072 TIP GP-GENERAL PURPOSE

254-5068 TIP GP-GENERAL PURPOSE

7T-9327 EDGE GP-CUTTING

9J-3175 TIP GP-SHORT

9W-8145 TIP GP-SHORT

9G-9288 CAP GP-PROTECTION

Truck sale:

49,000 USD

Caterpillar 960F, Construction
- Wheel Loaders
MILTON CAT

CATERPILLAR 960F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

USD $38,000

1997 CAT 960F

JB Earthmoving Equipment LLC
Georgia

USD $42,403

1995 CAT 960F

BIG MACHINERY BV
Velddriel, The Netherlands

USD $35,315

1996 CAT 960F

AMMAR GENERAL TRADING