FUEL SYSTEM
LINES GP-FUELLINES GP-FUEL RATIO CONTROL
GOVERNOR GP
PUMP GP-FUEL INJECTION
PUMP GP-FUEL PRIMING
FILTER GP-FUEL
PUMP GP-FUEL TRANSFER
FUEL SYSTEM
LINES GP-FUEL
#SEBP23610110
107-8182: LINES GP-FUEL FILTER
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-8724 | [1] | ELBOW | |
| 2. | 6V-9829 | [1] | CAP | |
| 3. | 5P-4924 | [1] | ELBOW | |
| 4. | 3J-1907 | [5] | SEAL-O-RING | |
| 5. | 5P-7813 | [1] | SEAL-O-RING | |
| 6. | 8T-0151 | [1] | ADAPTER | |
| 7. | 3N-3252 | [1] | SPRING | |
| 8. | 7E-5189 | [1] | VALVE AS (FUEL) | |
| 9. | 7E-5190 | [1] | TUBE AS | |
| 10. | 8T-7547 M | [9] | BOLT (M8X1.25X30-MM) | |
| 11. | 5F-7054 | [1] | SEAL-O-RING | |
| 12. | 6V-8397 | [6] | SEAL-O-RING | |
| 13. | 8W-5425 I | [1] | HOSE AS | |
| 14. | 107-3875 I | [1] | HOSE AS | |
| 15. | 6V-9850 | [1] | ELBOW | |
| 16. | 002-9372 | [2] | CLIP | |
| 17. | 6V-5839 | [1] | WASHER (11X21X2.5-MM THK) | |
| 18. | 5P-4116 | [2] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 19. | 8M-2773 | [4] | CLIP (LOOP) | |
| 20. | 8T-0276 M | [2] | BOLT (M8X1.25X45-MM) | |
| 21. | 8L-5449 | [4] | SPACER (0.375X0.75X0.69-IN THK) | |
| 22. | [1] | COVER | ||
| 23. | 7C-1159 | [1] | GASKET | |
| 24. | 6V-5218 M | [1] | BOLT (M8X1.25X35-MM) | |
| 25. | 9M-1974 | [13] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 8M-9024 B | [2] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 27. | 6V-6317 BM | [2] | BOLT (M10X1.5X20-MM) | |
| 28. | 1B-2713 | [1] | BOLT (1/4-20X1.75-IN) | |
| 29. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 30. | 5P-7970 M | [2] | NUT (M8X1.25-THD) | |
| 31. | 3K-8460 | [1] | PLUG (1/2-20-THD) | |
| 32. | 1J-9671 | [1] | SEAL-O-RING | |
| 33. | 032-1267 | [1] | CONNECTOR (STRAIGHT) | |
| 34. | 7E-3735 | [1] | GASKET | |
| 35. | 1R-0751 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY) | |
| 36. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 37. | 1B-9575 | [1] | BOLT (5/16-18X1.56-IN) | |
| 38. | 107-3874 | [1] | BRACKET | |
| 39. | 6V-3940 M | [6] | BOLT (M8X1.25X25-MM) | |
| 40. | 5M-5687 | [2] | CLIP | |
| 41. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 42. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 43. | 112-6521 | [1] | BASE AS-FUEL FILTER | |
| 44. | 9W-2641 | [2] | PLATE | |
| 45. | 107-3872 | [1] | TUBE AS-FUEL FILTER (INLET) | |
| 46. | 107-3873 | [1] | TUBE AS (OUTLET) | |
| 47. | 4N-0205 | [1] | SPACER (0.42X0.75X0.6-IN THK) | |
| 48. | 7B-1597 | [1] | CLIP | |
| 49. | 090-9434 | [1] | SPACER (9X20X10-MM THK) | |
| 50. | 104-3987 | [3] | CLIP | |
| 51. | 107-3877 | [1] | CONNECTOR | |
| 52. | 7X-2459 | [2] | ADAPTER-TEE | |
| 53. | 6V-3918 M | [1] | BOLT (M8X1.25X50-MM) | |
| 54. | 030-7942 | [1] | ELBOW | |
| 55. | 5P-1046 | [1] | CONNECTOR | |
| 56. | 5P-4961 | [2] | CLAMP-HOSE | |
| 57. | 5P-1442 BE | HOSE | ||
| 58. | 6I-2422 | [1] | VALVE AS | |
| 59. | 6V-5842 M | [1] | BOLT (M10X1.5X40-MM) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP23610111
107-8182: LINES GP-FUEL FILTER
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 129-1142 | [1] | BASE AS | |
| 112-6523 | [1] | INSERT-FUEL FILTER (TOP FILTER) | ||
| [1] | INSERT-FUEL FILTER (BOTTOM FILTER) | |||
| 2. | 6V-1820 CM | [4] | BOLT (M10X1.5X30-MM) | |
| 3. | 8W-6154 CI | [1] | HOSE AS | |
| 4. | 3J-1907 C | [10] | SEAL-O-RING | |
| 5. | 5P-7813 | [1] | SEAL-O-RING | |
| 6. | 8T-0151 | [1] | ADAPTER | |
| 7. | 3N-3252 | [1] | SPRING | |
| 8. | 7E-5189 | [1] | VALVE AS (FUEL) | |
| 9. | 7E-5190 | [1] | TUBE AS | |
| 10. | 8T-7547 CM | [2] | BOLT (M8X1.25X30-MM) | |
| 11. | 5F-7054 | [1] | SEAL-O-RING | |
| 12. | 6V-8397 C | [7] | SEAL-O-RING | |
| 13. | 103-2529 CE | [2] | HOSE (87.5CM EACH) | |
| 14. | 131-5482 I | [1] | HOSE AS | |
| 15. | 1R-0751 C | [2] | FILTER-FUEL (ADVANCED EFFICIENCY) | |
| 16. | 5P-4961 C | [4] | CLAMP-HOSE | |
| 17. | 8M-2773 | [6] | CLIP (LOOP) | |
| 18. | 3S-2093 | [2] | STRAP-CABLE | |
| 19. | 6V-8724 C | [3] | ELBOW | |
| 20. | 003-7764 C | [2] | END-HOSE | |
| 21. | 129-1090 C | [2] | VALVE-DRAIN | |
| 22. | 6V-5218 M | [1] | BOLT (M8X1.25X35-MM) | |
| 23. | 3E-4352 C | [5] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 24. | 8M-9024 B | [2] | WASHER-HARD (10.2X22.5X5-MM THK) | |
| 25. | 6V-6317 BM | [2] | BOLT (M10X1.5X20-MM) | |
| 26. | 8C-6869 C | [2] | CONNECTOR | |
| 27. | 5P-4924 C | [2] | ELBOW | |
| 28. | 8T-0788 C | [2] | ELBOW | |
| 29. | 096-9988 CM | [2] | BOLT (M14X2X30-MM) | |
| 30. | 9S-4191 C | [2] | PLUG (9/16-18-THD) | |
| 31. | 7X-0510 C | [2] | WASHER-HARD (15.5X29X3-MM THK) | |
| 32. | 139-6024 C | [1] | SUPPORT | |
| 33. | 6V-9850 | [1] | ELBOW | |
| 34. | 8L-5449 C | [1] | SPACER (0.375X0.75X0.69-IN THK) | |
| 35. | 8T-0276 CM | [1] | BOLT (M8X1.25X45-MM) | |
| 36. | 6K-8178 C | [1] | CLIP (LOOP) | |
| 37. | 6V-3940 CM | [1] | BOLT (M8X1.25X25-MM) | |
| 38. | 4N-0205 | [1] | SPACER (0.42X0.75X0.6-IN THK) | |
| 39. | 6V-5842 M | [1] | BOLT (M10X1.5X40-MM) | |
| 40. | 9W-2641 | [1] | PLATE | |
| 41. | 9M-8406 C | [1] | CLIP (LOOP) | |
| 42. | 6V-5217 CM | [1] | BOLT (M8X1.25X20-MM) | |
| 43. | 090-9434 | [1] | SPACER (9X20X10-MM THK) | |
| 44. | 7X-2459 C | [1] | ADAPTER-TEE | |
| 45. | 6V-3918 M | [1] | BOLT (M8X1.25X50-MM) | |
| 46. | 6V-5839 C | [5] | WASHER (11X21X2.5-MM THK) | |
| 47. | 6V-9829 | [1] | CAP | |
| 48. | 5P-1442 CE | HOSE | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP23610112
9Y-3943: LINES GP-FUEL RATIO CONTROL
9Y-3943 LINES GP-FUEL RATIO CONTROL
S/N 4TF14681-36834
PART OF 118-3600 ENGINE AR
S/N 4TF14681-36834
PART OF 118-3600 ENGINE AR
For full view, you need register
Parts for your M318 EXCAVATOR:
#SEBP23610113
7W-8434: LINES GP-GOVERNOR OIL
For full view, you need register
#SEBP23610114
107-7732: PUMP GP-FUEL INJECTION
For full view, you need register
#SEBP23610115
107-7732: PUMP GP-FUEL INJECTION
For full view, you need register
#SEBP23610116
1W-3791: PUMP GP-FUEL PRIMING
1W-3791 PUMP GP-FUEL PRIMING
S/N 4TF14681-30736
PART OF 1W-3790 PUMP GP-FUEL PRM & PRIM FILTER
S/N 4TF14681-30736
PART OF 1W-3790 PUMP GP-FUEL PRM & PRIM FILTER
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8N-8205 | [1] | BASE AS-FUEL FILTER | |
| 1W-3348 | [1] | BASE | ||
| 2. | 9S-8003 | [2] | PLUG (1/2-20-THD) | |
| 1J-9671 | [2] | SEAL-O-RING | ||
| 3. | 7E-5346 | [1] | VALVE AS | |
| 4. | 1B-7182 | [1] | BOLT (5/16-18X1.25-IN) | |
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 5. | 105-2508 | [1] | PUMP AS-FUEL PRIMING | |
| 229-3218 | [2] | VALVE AS | ||
| 7L-9061 | [1] | SEAL-O-RING | ||
| 6. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 7. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) |
#SEBP23610117
1W-3790: PUMP GP-FUEL PRM & PRIM FILTER
1W-3790 PUMP GP-FUEL PRM & PRIM FILTER
S/N 4TF14681-30736
PART OF 118-3599 ENGINE AR-GENERAL
S/N 4TF14681-30736
PART OF 118-3599 ENGINE AR-GENERAL
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-1628 | [1] | NUT (3/8-24-THD) | |
| 2. | 1W-3791 Y | [1] | PUMP GP-FUEL PRIMING | |
| 3. | 9M-2341 | [1] | FILTER ELEMENT-WTR SEP & FUEL (STANDARD EFFICIENCY)(PRIMARY) | |
| 4. | 7H-9678 | [1] | RETAINER-ELEMENT | |
| 5. | 2H-3429 | [1] | RING-RETAINING | |
| 6. | 7S-9323 | [1] | SPRING | |
| 7. | 8H-2810 | [1] | CASE AS-FILTER | |
| 8. | 8H-2778 | [1] | SEAL-RING | |
| 9. | 1L-3769 | [1] | RING-RETAINING | |
| 10. | 2J-0157 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23610118
127-6449: PUMP GP-FUEL PRM & WATER SEP
127-6449 PUMP GP-FUEL PRM & WATER SEP
S/N 4TF30737-36834
PART OF 118-3599 ENGINE AR-GENERAL
S/N 4TF30737-36834
PART OF 118-3599 ENGINE AR-GENERAL
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-4089 | [1] | ELEMENT-WATER SEPARATOR | |
| 2. | 118-1461 | [1] | BASE AS | |
| 3. | 118-8118 | [1] | RING-RETAINING | |
| 4. | 118-8119 | [1] | NUT | |
| 5. | 112-9401 | [1] | BOWL AS-WATER COLLECTION | |
| 128-8614 | [1] | KIT-SEAL (WATER SEPARATOR) | ||
| 6. | 129-6259 | [1] | PUMP GP-FUEL PRIMING | |
| 129-6262 | [1] | BLADDER | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 121-4480 | [1] | KIT-WATER BASE (WATER SEPARATOR) | ||
| (INCLUDES SEALS,PLUGS,CAP,NUT & RING) | ||||
#SEBP23610119
111-1929: PUMP GP-FUEL TRANSFER
For full view, you need register
Parts for your M318 EXCAVATOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5W-5131 | [1] | GROMMET | |
| 2. | 5W-8633 Y | [1] | PUMP GP-FUEL TRANSFER | |
| 3. | 5W-8653 | [1] | COVER | |
| 4. | 5W-8658 | [1] | COUPLING | |
| 5. | 4I-8443 | [1] | VALVE-CHECK | |
| 6. | 8U-0876 Y | [1] | HOSE GP-REFUELING | |
| 7. | 8U-3011 | [1] | SWITCH AS (FUEL PUMP) | |
| 9. | 8U-6276 | [1] | COUPLING | |
| 10. | 142-1613 | [1] | FILM-INSTRUCTION | |
| 11. | 8T-9402 | [2] | CLAMP-HOSE | |
| 12. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 13. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 14. | 117-3461 D | HOSE (.5 M) | ||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
LINES GP-FUEL
Specifications
Tool Operating Manual
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
Using the 4C-6090 Multichannel Temperature Selector Group{0599, 0701, 0706, 1251, 1254, 1290, 1713}
