AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

133-6422 WIRING GP-CAB RISER S/N 8AL1-671; 8AL674-674; 8AL676-677; 8AL679-679; 8AL682-682; 8AL686-686; 8AL719-719 PART OF 134-3727 RISER AR-CAB AN ATTACHMENT M318


ELECTRICAL AND STARTING SYSTEM
WIRING GP

EXCAVATOR M318 EXCAVATOR 8AL
 M318 Excavator 8AL00001-01019 (MACHINE) POWERED BY 3116 Engine SEBP2361 M318 8AL   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
172-3700 WIRING GP-AIR CONDITIONER
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
 

#SEBP23610180
 

133-6422: WIRING GP-CAB RISER

133-6422 WIRING GP-CAB RISER
S/N 8AL1-671; 8AL674-674; 8AL676-677; 8AL679-679; 8AL682-682; 8AL686-686; 8AL719-719
PART OF 134-3727 RISER AR-CAB
AN ATTACHMENT
i00503431 SEBP2361
1336422 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 5I-3878 [1] GROMMET (50-MM ID)  
4. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
5. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 8T-8737 [1] PLUG-SEAL  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 116-7317 [1] PLATE  
9. 130-9884 [1] BRACKET  
10. 133-6424 [1] HARNESS AS-CAB  
11. 133-6425 [1] HARNESS AS-CAB  
12. 134-2213 [1] BRACKET  
13. 134-2822 [1] HARNESS AS-CAB  
14. 134-3752 [1] HARNESS AS  
15. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3K-8107 [1] GROMMET  
17. 5C-7261 M [1] NUT (M8X1.25-THD)  
18. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
19. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
21. 8D-9947 [2] CLIP  
22. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
23. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 096-0061 B [20] STRAP-CABLE  
25. 5P-5992 D HOSE (2.0 M)  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP23610181
 

133-6422: WIRING GP-CAB RISER

133-6422 WIRING GP-CAB RISER
S/N 8AL672-673; 8AL675-675; 8AL678-678; 8AL680-681; 8AL683-685; 8AL687-718; 8AL720-1019
PART OF 134-3727 RISER AR-CAB
AN ATTACHMENT
i00799144 SEBP2361
1336422 WIRING GP-CAB RISER Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3355 [1] RECEPTACLE AS-CONNECTOR  
2. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
3. 128-1423 E SEAL (5CM)  
4. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
5. 8T-8729 [5] PIN-CONNECTOR (16-GA TO 18-GA)  
6. 8T-8737 [1] PLUG-SEAL  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 116-7317 [1] PLATE  
10. 133-6424 [1] HARNESS AS-CAB  
11. 133-6425 [1] HARNESS AS-CAB  
12. 134-2213 [1] BRACKET  
13. 134-2822 [1] HARNESS AS-CAB  
14. 152-1691 [1] HARNESS AS  
15. 095-0723 M [2] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3K-8107 [1] GROMMET  
17. 5C-7261 M [1] NUT (M8X1.25-THD)  
18. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
19. 5P-4116 [1] WASHER-HARD (8.8X20.5X2-MM THK)  
20. 7X-2548 M [1] BOLT (M12X1.75X16-MM)  
21. 8D-9947 [2] CLIP  
22. 8T-4189 M [1] BOLT (M8X1.25X20-MM)  
23. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
24. 096-0061 B [20] STRAP-CABLE  
25. 144-0195 E HOSE (445CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP23610182
 

111-1865: WIRING GP-CHASSIS

111-1865 WIRING GP-CHASSIS
S/N 8AL1-1019
UNDERCARRIAGE FRONT
PART OF 111-1842 FRAME AR-UNDERCARRIAGE
i00476600 SEBP2361
1111865 WIRING GP-CHASSIS Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-2973 [1] HARNESS AS  
2. 9X-6772 [5] STRAP-CABLE  
 

#SEBP23610183
 

116-4413: WIRING GP-ELECTRONIC CONTROL

116-4413 WIRING GP-ELECTRONIC CONTROL
S/N 8AL1-742
PART OF 111-1846 OPERATOR AR
i00540952 SEBP2361
1164413 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2455 [1] SENSOR GP-SPEED (ENGINE RPM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE  
2. 8U-5041 [1] COVER  
3. 116-4404 [1] CONTROL AS-ELECTRONIC  
  143-4781 [1] BRACKET AS  
  5W-1453 [2] LOCKWASHER  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
4. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
5. 120-6922 [1] HARNESS AS (CONSOLE)  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 135-7608 [1] PLATE AS  
9. 120-6923 [1] HARNESS AS  
10. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL LOCK)  
11. 144-7391 [1] HARNESS AS  
12. 139-5317 [1] PLATE  
13. 139-5688 [1] CONTROL AS-ELECTRONIC  
14. 139-8284 [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 M [4] BOLT (M6X1X70-MM)  
20. 8T-4171 M [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610184
 

116-4413: WIRING GP-ELECTRONIC CONTROL

116-4413 WIRING GP-ELECTRONIC CONTROL
S/N 8AL743-763
PART OF 111-1846 OPERATOR AR
i00777651 SEBP2361
1164413 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2455 [1] SENSOR GP-SPEED (ENGINE RPM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
2. 8U-5041 [1] COVER  
3. 116-4404 [1] CONTROL AS-ELECTRONIC  
4. 119-3405 [1] SWITCH AS (PEDAL TRAVEL)  
5. 119-5856 [1] CONTROL AS-GOVERNOR ACTUATOR  
6. 139-1060 [1] HARNESS AS  
7. 120-6922 [1] HARNESS AS (CONSOLE)  
8. 120-6923 [1] HARNESS AS  
9. 122-4695 [1] BRACKET  
10. 124-0329 [2] RESISTOR  
11. 124-3461 [1] PLATE AS  
12. 125-3513 [1] BRACKET  
13. 125-6566 [1] WIRE AS  
14. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
15. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 5I-3054 M [1] NUT (M4X0.7-THD)  
19. 5W-5038 [1] WASHER (4.3X9X0.8-MM THK)  
20. 6V-9492 M [1] SCREW-MACHINE (M4X0.7X25-MM)  
21. 7X-2535 M [1] BOLT (M6X1X60-MM)  
22. 8T-4171 M [2] BOLT (M6X1X12-MM)  
23. 9X-8256 [3] WASHER (6.6X12X2-MM THK)  
  096-0061 BF [1] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610185
 

116-4413: WIRING GP-ELECTRONIC CONTROL

116-4413 WIRING GP-ELECTRONIC CONTROL
S/N 8AL764-992
PART OF 111-1846 OPERATOR AR
i00777652 SEBP2361
1164413 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2455 [1] SENSOR GP-SPEED (ENGINE RPM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
2. 8U-5041 [1] COVER  
3. 116-4404 [1] CONTROL AS-ELECTRONIC  
  143-4781 [1] BRACKET AS  
  5W-1453 [2] LOCKWASHER  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
4. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
5. 120-6922 [1] HARNESS AS (CONSOLE)  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 135-7608 [1] PLATE AS  
9. 120-6923 [1] HARNESS AS  
10. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL LOCK)  
11. 139-1060 [1] HARNESS AS  
12. 139-5317 [1] PLATE  
13. 139-5688 [1] CONTROL AS-ELECTRONIC  
14. 139-8284 [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 M [4] BOLT (M6X1X70-MM)  
20. 8T-4171 M [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610186
 

116-4413: WIRING GP-ELECTRONIC CONTROL

116-4413 WIRING GP-ELECTRONIC CONTROL
S/N 8AL993-1019
PART OF 111-1846 OPERATOR AR
i00777653 SEBP2361
1164413 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-2455 [1] SENSOR GP-SPEED (ENGINE RPM)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 E SLEEVE (14CM)  
2. 117-3188 [1] COVER  
3. 147-8479 C [1] CONTROL AS-ELECTRONIC  
  143-4781 [1] BRACKET AS  
  5W-1453 [2] LOCKWASHER  
  099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
4. 120-0090 [8] WASHER (3.2X7X0.5-MM THK)  
5. 120-6922 [1] HARNESS AS (CONSOLE)  
6. 122-4695 [1] BRACKET  
7. 124-0329 [2] RESISTOR  
8. 164-7250 [1] BRACKET AS  
9. 120-6923 [1] HARNESS AS  
10. 136-9421 [1] SWITCH GP-LIMIT (TRAVEL PEDAL LOCK)  
11. 144-7391 [1] HARNESS AS  
12. 139-5317 [1] PLATE  
13. 143-9581 C [1] CONTROL AS-ELECTRONIC  
14. 139-8284 [1] WIRE AS  
15. 095-0723 M [4] SCREW-SPECIAL (M3X0.5X10-MM)  
16. 3C-6969 M [4] NUT (M3X0.5-THD)  
17. 3E-8048 M [4] SCREW-MACHINE (M3X0.5X6-MM)  
18. 7X-2535 M [1] BOLT (M6X1X60-MM)  
19. 8T-3844 M [4] BOLT (M6X1X70-MM)  
20. 8T-4171 M [3] BOLT (M6X1X12-MM)  
21. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
22. 117-3190 [1] CONNECTOR (4-PIN)  
  096-0061 BF [15] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610187
 

111-1974: WIRING GP-PLATFORM

111-1974 WIRING GP-PLATFORM
S/N 8AL1-744
PART OF 111-1846 OPERATOR AR
i00477612 SEBP2361
1111974 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8B-6678 [1] GROMMET  
2. 8U-1110 [2] CONNECTOR  
3. 116-7317 [1] PLATE  
4. 117-0949 [1] HARNESS AS  
5. 117-3187 [1] SWITCH AS (START, PILOT)(START/PILOT PRESS ENABLE)  
6. 120-6920 [1] HARNESS AS  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
9. 5W-1992 [4] TERMINAL  
10. 130-8268 [2] SCREW-PAN HEAD  
11. 3H-2900 [1] GROMMET  
12. 125-6083 [1] SCREW-PAN HEAD  
13. 128-1423 E SEAL (37CM)  
  9X-6772 BF STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610188
 

111-1974: WIRING GP-PLATFORM

111-1974 WIRING GP-PLATFORM
S/N 8AL745-1019
PART OF 111-1846 OPERATOR AR
i00614801 SEBP2361
1111974 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3H-2900 [1] GROMMET  
2. 8U-1110 [2] CONNECTOR  
3. 116-7317 [1] PLATE  
4. 117-0949 [1] HARNESS AS  
5. 117-3187 [1] SWITCH AS (START, PILOT)(START/PILOT PRESS ENABLE)  
6. 120-6920 [1] HARNESS AS  
7. 116-6952 M [3] BOLT (M4X0.7X10-MM)  
8. 5W-5038 [3] WASHER (4.3X9X0.8-MM THK)  
9. 5W-1992 [4] TERMINAL  
10. 130-8268 [2] SCREW-PAN HEAD  
11. 128-1423 C SEAL (5CM)  
12. 125-6083 [1] SCREW-PAN HEAD  
13. 128-1423 E SEAL (37CM)  
14. 5C-2874 CM [2] NUT (M5X0.8-THD)  
15. 8T-0328 C [2] WASHER-HARD (5.5X10X1-MM THK)  
16. 139-2350 C [1] STRAP-CABLE  
17. 139-2351 C [2] STRAP-CABLE  
18. 6V-7743 CM [2] LOCKNUT (M6X1-THD)  
19. 8T-4138 CM [2] BOLT (M6X1X20-MM)  
20. 9X-8244 CM [1] LOCKNUT (M16X2-THD)  
21. 9X-8256 C [2] WASHER (6.6X12X2-MM THK)  
22. 142-8545 CM [1] BOLT (M16X2X20-MM)  
23. 144-0629 C [1] PLATE  
24. 144-0630 C [1] PLATE  
  9X-6772 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP23610189
 

113-3205: WIRING GP-PLATFORM

113-3205 WIRING GP-PLATFORM
S/N 8AL1-642
PART OF 111-1841 CHASSIS AR
i00474023 SEBP2361
1133205 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] WASHER  
2. 3E-3387 [1] RECEPTACLE AS  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
3. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
4. 5W-6315 [1] FITTING  
5. 5W-9323 [1] COVER  
6. 111-1975 [1] SWITCH GP-DIRECTIONAL (HORN/LIGHTS)  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
  5W-9374 [1] LEVER AS  
  8T-0308 M [2] SCREW-SLOTTED  
7. 5W-9376 [1] SWITCH AS (AIR HORN)  
8. 8U-2598 Y [1] WASHER GP-WINDOW  
9. 8U-6109 [1] SWITCH-BRAKE  
10. 8X-9618 [1] STRAP AS-GROUND  
11. 120-6924 [1] HARNESS AS  
12. 119-9453 M [2] SCREW (M6X1X16-MM)  
13. 2W-9513 M [2] BOLT (M6X1X10-MM)  
14. 5C-7261 M [4] NUT (M8X1.25-THD)  
15. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 5W-5129 [1] GROMMET  
17. 5Y-2425 [2] WASHER (6.5X17.5X1.5-MM THK)  
18. 6R-7943 M [2] SCREW (M5X0.8X15-MM)  
19. 8T-4970 M [2] BOLT (M6X1X14-MM)  
20. 5P-0715 D HOSE (1.28M)  
98. 096-0061 BF [20] STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M318 :

WIRING GP-AIR CONDITIONER
172-3700 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WIRING GP-AIR CONDITIONER
126-3394 WIRING GP-AIR CONDITIONER
WARNING GP-OVERLOAD
111-1917 WARNING GP-OVERLOAD
SWITCH GP-WIPER
137-7245 SWITCH GP-WIPER
SWITCH GP-WINDOW
122-5777 SWITCH GP-WINDOW
SWITCH GP-SWIVEL
8U-5842 SWITCH GP-SWIVEL
SWITCH GP-SWIVEL
121-2974 SWITCH GP-SWIVEL
WIRING GP-CAB RISER
133-6422 WIRING GP-CAB RISER
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-PLATFORM
111-1974 WIRING GP-PLATFORM
WIRING GP-PLATFORM
111-1974 WIRING GP-PLATFORM

Truck sale:

 
 
Caterpillar M318
- wheel excavator
FINANZAUTO S.A.
Caterpillar M318-07A, wheel excavator, Construction
 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
162,224 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
183,999 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
207,572 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.