AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

123-9719 WIRING GP-PLATFORM S/N 8AL643-825 PART OF 111-1841 CHASSIS AR M318 EXCAVATOR


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP

EXCAVATOR M318 EXCAVATOR 8AL
 M318 Excavator 8AL00001-01019 (MACHINE) POWERED BY 3116 Engine SEBP2361 M318 8AL   (2015)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-PLATFORM
111-1974 WIRING GP-PLATFORM
WIRING GP-PLATFORM
113-3205 WIRING GP-PLATFORM
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PRIORITY VALVE
141-3995 WIRING GP-PRIORITY VALVE
WIRING GP-SECONDARY STEERING
121-9144 WIRING GP-SECONDARY STEERING
 

#SEBP23610190
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 8AL643-825
PART OF 111-1841 CHASSIS AR
i00516069 SEBP2361
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [2] WASHER  
2. 3E-3387 [1] RECEPTACLE AS  
3. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
4. 5W-6315 [1] FITTING  
5. 5W-9323 [1] COVER  
6. 5W-9376 [1] SWITCH AS (AIR HORN)  
7. 5Y-2425 [2] WASHER (6.5X17.5X1.5-MM THK)  
8. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
9. 8U-2598 Y [1] WASHER GP-WINDOW  
10. 8U-6109 [1] SWITCH-BRAKE  
11. 8X-9618 [1] STRAP AS-GROUND  
12. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
13. 127-5600 [1] HARNESS AS  
14. 119-9453 M [2] SCREW (M6X1X16-MM)  
15. 2W-9513 M [2] BOLT (M6X1X10-MM)  
16. 5C-7261 M [4] NUT (M8X1.25-THD)  
17. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
18. 5P-8131 [1] GROMMET  
19. 6P-4467 [1] GROMMET  
20. 8T-4970 M [2] BOLT (M6X1X14-MM)  
21. 5P-0715 D HOSE (13M)  
98. 096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610191
 

123-9719: WIRING GP-PLATFORM

123-9719 WIRING GP-PLATFORM
S/N 8AL826-1019
PART OF 111-1841 CHASSIS AR
i00516071 SEBP2361
1239719 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 175-3357 [1] RECEPTACLE AS  
2. 3E-3389 [1] WEDGE-RECEPTACLE LOCK (8-PIN)  
3. 5W-6315 [1] FITTING  
4. 164-8366 [1] COVER  
5. 5W-9376 [1] SWITCH AS (AIR HORN)  
6. 8U-2598 Y [1] WASHER GP-WINDOW  
7. 8U-6109 [1] SWITCH-BRAKE  
8. 8X-9618 [1] STRAP AS-GROUND  
9. 111-1975 [1] SWITCH GP-DIRECTIONAL  
  8T-0308 M [2] SCREW-SLOTTED  
  8T-8729 [8] PIN-CONNECTOR (16-GA TO 18-GA)  
10. 140-9123 C [1] HARNESS AS-PLATFORM  
11. 099-2374 M [2] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
12. 2W-9513 M [2] BOLT (M6X1X10-MM)  
13. 5C-7261 M [2] NUT (M8X1.25-THD)  
14. 5C-8917 CM [2] SCREW (M6X8-MM)  
15. 5P-4116 [4] WASHER-HARD (8.8X20.5X2-MM THK)  
16. 5P-8131 [1] GROMMET  
17. 6P-4467 [1] GROMMET  
18. 5P-0715 DC HOSE (2.6M)  
19. 139-2350 C [6] STRAP-CABLE  
21. 3F-9556 [2] LOCKWASHER  
  096-0061 BF STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610192
 

141-3995: WIRING GP-PRIORITY VALVE

141-3995 WIRING GP-PRIORITY VALVE
S/N 8AL1-1019
PART OF 117-0665, 134-3762 VALVE & LINES GP-PRIORITY
AN ATTACHMENT
i00501387 SEBP2361
1413995 WIRING GP-PRIORITY VALVE Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 133-8327 [1] SWITCH-KEY (PRIORITY VALVE)  
2. 148-6631 [1] HARNESS AS  
3. 149-1028 [1] PLATE (PRIORITY)  
4. 096-0061 B [10] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP23610193
 

121-9144: WIRING GP-SECONDARY STEERING

121-9144 WIRING GP-SECONDARY STEERING
S/N 8AL1-417; 8AL419-427; 8AL429-434; 8AL436-437; 8AL439-445; 8AL447-457
PART OF 112-7142 STEERING AR-SECONDARY
AN ATTACHMENT
i00487372 SEBP2361
1219144 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)  
2. 3E-3366 [1] PLUG AS-CONNECTOR  
3. 3E-3368 [1] WEDGE-PLUG LOCK (3-PIN)  
4. 122-2363 [1] HARNESS AS  
5. 122-2364 [1] WIRE AS  
6. 122-2378 [1] CONTROL AS-SECONDARY STEER  
7. 8T-4171 M [6] BOLT (M6X1X12-MM)  
8. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
9. 096-0061 [15] STRAP-CABLE  
10. 8T-8730 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610194
 

121-9144: WIRING GP-SECONDARY STEERING

121-9144 WIRING GP-SECONDARY STEERING
S/N 8AL418-418; 8AL428-428; 8AL435-435; 8AL438-438; 8AL446-446; 8AL458-1019
PART OF 112-7142 STEERING AR-SECONDARY
AN ATTACHMENT
i00487377 SEBP2361
1219144 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-0075 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(SUPPLEMENTAL STEER)  
2. 117-4861 C [1] RELAY AS  
3. 122-2364 [1] WIRE AS  
4. 132-6640 CY [1] CONTROL GP-SECONDARY STEERING  
5. 155-2276 [1] WEDGE-PLUG LOCK (3-PIN)  
6. 175-3350 [1] PLUG AS-CONNECTOR  
7. 179-9050 C [1] HARNESS AS  
8. 096-4835 CM [2] BOLT-SOCKET HEAD (M10X1.5X16-MM)  
9. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4171 M [2] BOLT (M6X1X12-MM)  
11. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
12. 096-0061 B [15] STRAP-CABLE  
13. 186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610195
 

121-2452: WIRING GP-UNDERCARRIAGE/SWIVEL

121-2452 WIRING GP-UNDERCARRIAGE/SWIVEL
S/N 8AL1-1019
PART OF 111-1928 STABILIZER AR
AN ATTACHMENT
i00480570 SEBP2361
1212452 WIRING GP-UNDERCARRIAGE/SWIVEL Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-3624 [1] TERMINAL  
2. 8U-1639 [1] CAM AS  
3. 121-2972 [1] HARNESS AS  
4. 121-2974 Y [1] SWITCH GP-SWIVEL  
5. 8T-0337 M [4] SCREW-MACHINE (M4X0.7X12-MM)  
6. 5C-9553 M [2] BOLT (M6X1X16-MM)  
7. 9X-6772 B STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610196
 

111-1883: AXLE & MTG AR-FRONT

111-1883 AXLE & MTG AR-FRONT
S/N 8AL1-1019
PART OF 111-1844 POWER TRAIN AR
i00476844 SEBP2361
1111883 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-2817 [2] FITTING-GREASE  
2. 110-2170 [1] PIN  
3. 111-1230 [2] PLATE AS  
4. 112-4533 Y [1] AXLE AR-FRONT  
5. 8T-4132 M [1] NUT (M16X2-THD)  
6. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
7. 6V-5844 M [8] BOLT (M16X2X35-MM)  
8. 8T-0282 M [1] BOLT (M16X2X120-MM)  
9. 163-7180 B [1] SHIM (0.5-MM THK)  
10. 5W-5694 [20] RING  
11. 9X-0641 [20] WASHER  
12. 9X-0642 [20] NUT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610197
 

118-1879: AXLE & MTG AR-FRONT

118-1879 AXLE & MTG AR-FRONT
S/N 8AL1-1019
PART OF 118-1878 AXLE AR-WIDE
AN ATTACHMENT
i00480625 SEBP2361
1181879 AXLE & MTG AR-FRONT Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
2. 5W-2817 [1] FITTING-GREASE  
3. 110-2170 [1] PIN  
4. 111-1230 [2] PLATE AS  
5. 121-4435 Y [1] AXLE AR-FRONT  
6. 6V-5844 M [8] BOLT (M16X2X35-MM)  
7. 8T-0282 M [1] BOLT (M16X2X120-MM)  
8. 8T-4132 M [1] NUT (M16X2-THD)  
9. 163-7180 B [1] SHIM (0.5-MM THK)  
10. 5W-5694 [20] RING  
11. 9X-0641 [20] WASHER  
12. 9X-0642 [20] NUT  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610198
 

111-1884: AXLE & MTG AR-REAR

111-1884 AXLE & MTG AR-REAR
S/N 8AL1-1019
PART OF 111-1844 POWER TRAIN AR
i00476853 SEBP2361
1111884 AXLE & MTG AR-REAR Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-4976 Y [1] AXLE & TRANSMISSION AR  
2. 6V-7688 M [8] LOCKNUT (M20X2.5-THD)  
3. 7Y-1858 [16] WASHER (21X37X3-MM THK)  
4. 8T-0656 M [8] BOLT (M20X2.5X150-MM)  
5. 6V-6560 [2] SEAL-O-RING  
6. 123-8324 [2] CAP  
7. 124-5215 [2] FITTING AS (QUICK DISCONNECT)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23610199
 

118-1880: AXLE & MTG AR-REAR

118-1880 AXLE & MTG AR-REAR
S/N 8AL1-1019
PART OF 118-1878 AXLE AR-WIDE
AN ATTACHMENT
i00480628 SEBP2361
1181880 AXLE & MTG AR-REAR Parts scheme
  For full view, you need register

Parts for your M318 EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-1858 [16] WASHER (21X37X3-MM THK)  
2. 132-4618 [2] ADAPTER AS  
3. 123-8324 [2] CAP  
4. 124-5215 [2] FITTING AS (QUICK DISCONNECT)  
5. 129-2670 Y [1] AXLE & TRANSMISSION AR  
6. 132-4603 [2] HOSE AS  
7. 6V-6560 [2] SEAL-O-RING  
8. 6V-7688 M [8] LOCKNUT (M20X2.5-THD)  
9. 8T-0656 M [8] BOLT (M20X2.5X150-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/12
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M318 :

WIRING GP-PLATFORM
113-3205 WIRING GP-PLATFORM
WIRING GP-PLATFORM
111-1974 WIRING GP-PLATFORM
WIRING GP-PLATFORM
111-1974 WIRING GP-PLATFORM
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
116-4413 WIRING GP-ELECTRONIC CONTROL
WIRING GP-CHASSIS
111-1865 WIRING GP-CHASSIS
WIRING GP-PLATFORM
123-9719 WIRING GP-PLATFORM
WIRING GP-PRIORITY VALVE
141-3995 WIRING GP-PRIORITY VALVE
WIRING GP-SECONDARY STEERING
121-9144 WIRING GP-SECONDARY STEERING
WIRING GP-SECONDARY STEERING
121-9144 WIRING GP-SECONDARY STEERING
WIRING GP-UNDERCARRIAGE/SWIVEL
121-2452 WIRING GP-UNDERCARRIAGE/SWIVEL
AXLE & MTG AR-FRONT
111-1883 AXLE & MTG AR-FRONT
AXLE & MTG AR-FRONT
118-1879 AXLE & MTG AR-FRONT
AXLE & MTG AR-REAR
111-1884 AXLE & MTG AR-REAR

Truck sale:

 
 
Caterpillar M318
- wheel excavator
FINANZAUTO S.A.
Caterpillar M318-07A, wheel excavator, Construction
 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
162,224 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
183,999 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Caterpillar M318-07A, wheel excavator, Construction
207,572 
Caterpillar M318-07A, wheel excavator, Construction
- wheel excavator
ZEPPELIN BAUMASCHINEN
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.