AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

938F Wheel Loader 2RM00001-UP (MACHINE) POWERED BY 3116 Engine ELECTRICAL AND STARTING SYSTEM Caterpillar SIS



WHEEL LOADER 938F WHEEL LOADER 2RM
 938F Wheel Loader 2RM00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2362 938F 2RM   (1994)

Parts group 938F:

  For full view, you need register
ELECTRICAL AND STARTING SYSTEM
ALARM GP
ALARM GP
3E-6328 ALARM GP
3E-6328 ALARM GP -ACTION
S/N 2RM1-UP
24-VOLT
PART OF 104-1740, 111-7396 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
ALTERNATOR GP-CHARGING
PULLEY GP-FAN & ALT DRIVE
108-6573 PULLEY GP-FAN & ALT DRIVE
108-6573 PULLEY GP-FAN & ALT DRIVE
S/N 2RM1-99999
PART OF 108-6571, 134-4289 INSTALLATION AR-ENGINE
ALTERNATOR GP-CHARGING
123-9815 ALTERNATOR GP-CHARGING
123-9815 ALTERNATOR GP-CHARGING
S/N 2RM878-99999
24 VOLT, 55 AMPERE
PART OF 108-6571, 134-4289 INSTALLATION AR-ENGINE
ALTERNATOR GP-CHARGING
9W-3043 ALTERNATOR GP-CHARGING
9W-3043 ALTERNATOR GP-CHARGING
S/N 2RM1-99999
24 VOLT, 52 AMPERE
PART OF 123-9815, 9Y-1949 ALTERNATOR GP-CHARGING
ALTERNATOR GP-CHARGING
9Y-1949 ALTERNATOR GP-CHARGING
9Y-1949 ALTERNATOR GP-CHARGING
S/N 2RM1-877
24 VOLT, 55 AMPERE
PART OF 108-6571 INSTALLATION AR-ENGINE
BATTERY GP
BATTERY & WIRING GP
103-5783 BATTERY & WIRING GP
103-5783 BATTERY & WIRING GP
S/N 2RM1-99999
PART OF 101-8791 CHASSIS AR
117-1035 BATTERY GP
117-1035 BATTERY GP
S/N 2RM1-99999
AN ATTACHMENT
ELECTRONICS GP-POWER TRAIN
111-5025 CONTROL GP-AUTOSHIFT
111-5025 CONTROL GP-AUTOSHIFT
S/N 2RM1-UP
PART OF 104-1742, 111-7394 WIRING GP-CAB
ALSO AN ATTACHMENT
CONTROL GP-AUTOSHIFT
131-1686 CONTROL GP-AUTOSHIFT
131-1686 CONTROL GP-AUTOSHIFT
S/N 2RM1-99999
PART OF 111-5025 CONTROL GP-AUTOSHIFT
ALSO AN ATTACHMENT
ELECTRONICS GP-MACHINE
CONTROL GP-SECONDARY STEERING
3E-5184 CONTROL GP-SECONDARY STEERING
3E-5184 CONTROL GP-SECONDARY STEERING
S/N 2RM1265-99999
PART OF 139-2344 WIRING GP-SECONDARY STEERING
AN ATTACHMENT
CONTROL GP-TCS DISPLAY ELEK
115-9476 CONTROL GP-TCS DISPLAY ELEK
115-9476 CONTROL GP-TCS DISPLAY ELEK
S/N 2RM1-99999
PART OF 109-0931 WIRING GP-TRACTION CONTROL
AN ATTACHMENT
LIGHTING GP
LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD
9X-1439 LAMP GP-FLOOD -VERTICAL MOUNT
S/N 2RM1-99999
24-VOLT
PART OF 8R-3602, 9C-8242 LIGHTING GP-FLOOD, 4E-2647 LIGHTING GP-FLOOD & SIGNAL, 112-1589 LIGHTING GP-ROADING
ALSO AN ATTACHMENT
LAMP GP-HEAD & SIGNAL
105-4850 LAMP GP-HEAD & SIGNAL
105-4850 LAMP GP-HEAD & SIGNAL -RH
S/N 2RM1-99999
24-VOLT
FIELD REPLACEMENT FOR @@@@@ 3E-7586@@@@@
LAMP GP-HEAD & SIGNAL
3E-7586 LAMP GP-HEAD & SIGNAL
3E-7586 LAMP GP-HEAD & SIGNAL -RH
S/N 2RM1-99999
24 VOLT. HIGH/LOW-TURN-POSITIVE
PART OF 112-1589 LIGHTING GP-ROADING
FIELD REPLACEMENT ORDER @@@@@105-4850@@@@@
AN ATTACHMENT
LAMP GP-SIGNAL
107-4401 LAMP GP-SIGNAL
107-4401 LAMP GP-SIGNAL -STOP, TAIL
S/N 2RM1-99999
24-VOLT
PART OF 112-1589 LIGHTING GP-ROADING
AN ATTACHMENT
LAMP GP-SIGNAL
107-4402 LAMP GP-SIGNAL
107-4402 LAMP GP-SIGNAL -REAR TURN
S/N 2RM1-99999
24-VOLT
PART OF 112-1589 LIGHTING GP-ROADING, 111-9301 LIGHTING GP-SIGNAL
AN ATTACHMENT
LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
3E-6466 LAMP GP-SIGNAL
S/N 2RM1-99999
24-VOLT
PART OF 111-9301 LIGHTING GP-SIGNAL
AN ATTACHMENT
LAMP GP-SIGNAL
3E-6467 LAMP GP-SIGNAL
3E-6467 LAMP GP-SIGNAL
S/N 2RM1-99999
24-VOLT
PART OF 4E-2647 LIGHTING GP-FLOOD & SIGNAL
LIGHTING GP-FLOOD
8R-3602 LIGHTING GP-FLOOD
8R-3602 LIGHTING GP-FLOOD -ENGINE-2-LAMP, ROPS FRONT
S/N 2RM1-99999
PART OF 111-4412 CANOPY AR-OPEN ROPS
FOR USE WITH OPEN ROPS
AN ATTACHMENT
LIGHTING GP-FLOOD
9C-8242 LIGHTING GP-FLOOD
9C-8242 LIGHTING GP-FLOOD -ENGINE-2-LAMP, CAB, FRONT
S/N 2RM1-99999
PART OF 101-8799 CAB AR-ENCLOSED ROPS
LIGHTING GP-FLOOD & SIGNAL
4E-2647 LIGHTING GP-FLOOD & SIGNAL
4E-2647 LIGHTING GP-FLOOD & SIGNAL -6-LAMP, FRONT, REAR
S/N 2RM1-99999
PART OF 101-8791 CHASSIS AR
LIGHTING GP-ROADING
112-1589 LIGHTING GP-ROADING
112-1589 LIGHTING GP-ROADING
S/N 2RM1-99999
PART OF 117-4870 ROADING AR
AN ATTACHMENT
LIGHTING GP-SIGNAL
111-9301 LIGHTING GP-SIGNAL
111-9301 LIGHTING GP-SIGNAL -4-LAMP, FRONT, REAR
S/N 2RM1-UP
PART OF 115-2390 CONVERSION AR-CERTIFICATION
CANNOT BE USED WITH 112-1589 LIGHTING GP-ROADING
AN ATTACHMENT
LIGHTING GP-SIGNAL
111-9301 LIGHTING GP-SIGNAL
111-9301 LIGHTING GP-SIGNAL -4-LAMP, FRONT, REAR
S/N 2RM1-99999
PART OF 115-2390 CONVERSION AR-CERTIFICATION
CANNOT BE USED WITH 112-1589 LIGHTING GP-ROADING
AN ATTACHMENT
MOTOR GP
139-2327 PUMP & MOTOR GP-SEC STEERING
139-2327 PUMP & MOTOR GP-SEC STEERING
S/N 2RM1264-99999
PART OF 139-2325 PUMP & MTG GP-SECONDARY STEER
AN ATTACHMENT
ROADING AR
117-4870 ROADING AR
117-4870 ROADING AR
S/N 2RM1-99999
AN ATTACHMENT
SENSOR GP
CONTROL GP-LIFT KICKOUT
3E-7844 CONTROL GP-LIFT KICKOUT
3E-7844 CONTROL GP-LIFT KICKOUT
S/N 2RM1-99999
PART OF 103-5785 KICKOUT & POSITIONER GP
CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION -WORK TOOL
S/N 2RM1-99999
PART OF 103-5785 KICKOUT & POSITIONER GP
SENSOR GP-POSITION
123-7416 SENSOR GP-POSITION
123-7416 SENSOR GP-POSITION -LIFT
S/N 2RM1-99999
PART OF 130-4730 WIRING GP-SENSOR
AN ATTACHMENT
SENSOR GP-PRESSURE
124-4672 SENSOR GP-PRESSURE
124-4672 SENSOR GP-PRESSURE
S/N 2RM1-99999
PART OF 130-4730 WIRING GP-SENSOR
AN ATTACHMENT
SENSOR GP-TEMPERATURE
100-3055 SENSOR GP-TEMPERATURE
100-3055 SENSOR GP-TEMPERATURE -ENGINE COOLANT
S/N 2RM1-1136
8 VOLT. PULSE WIDTH MODULATION
PART OF 103-5797 WIRING GP-ENGINE
SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
S/N 2RM1137-99999
8 VOLT. PULSE WIDTH MODULATION
PART OF 103-5797 WIRING GP-ENGINE
SOLENOID GP-SHUTOFF
SOLENOID GP-SHUTOFF
7C-4028 SOLENOID GP-SHUTOFF
7C-4028 SOLENOID GP-SHUTOFF -FUEL
S/N 4TF14130-UP
24 VOLT DC. BOSS MOUNTED
PART OF 103-1978, 108-1828, 133-8829, 133-8830 ENGINE AR
FOR USE WITH APPLICATIONS REQUIRING A 24 VOLT LATCHING TYPE SHUT-OFF SOLENOID
ALSO AN ATTACHMENT
STARTING AID GP
STARTING AID GP
102-8823 STARTING AID GP
102-8823 STARTING AID GP
S/N 4TF22700-99999
PART OF 108-1828, 133-8830 ENGINE AR
AN ATTACHMENT
STARTING AID GP
112-3392 STARTING AID GP
112-3392 STARTING AID GP
S/N 2RM1-99999
PART OF 111-9299 HEATER AR-AIR INLET
AN ATTACHMENT
STARTING AID GP-ETHER
103-7394 STARTING AID GP-ETHER
103-7394 STARTING AID GP-ETHER
S/N 2RM1-99999
AN ATTACHMENT
STARTING MOTOR GP
106-8558 STARTING MOTOR GP-ELECTRIC
106-8558 STARTING MOTOR GP-ELECTRIC
S/N 2RM1-99999
24 VOLT
PART OF 111-4275 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1517@@@@@
FIELD REPLACEMENT FOR @@@@@106-8559@@@@@
STARTING MOTOR GP-ELECTRIC
106-8559 STARTING MOTOR GP-ELECTRIC
106-8559 STARTING MOTOR GP-ELECTRIC
S/N 2RM1-99999
24 VOLT
PART OF 106-8558 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@106-8558@@@@@
STARTING MOTOR GP-ELECTRIC
111-4275 STARTING MOTOR GP-ELECTRIC
111-4275 STARTING MOTOR GP-ELECTRIC
S/N 2RM1-99999
24-VOLT
PART OF 108-6571, 134-4289 INSTALLATION AR-ENGINE
STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
207-1517 STARTING MOTOR GP-ELECTRIC
S/N 2RM1-UP
24-VOLT
FIELD REPLACEMENT FOR @@@@@106-8558@@@@@
SWITCH GP
SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT
7N-0718 SWITCH GP-DISCONNECT -BATTERY
S/N 2RM1-99999
PART OF 103-5783 BATTERY & WIRING GP
SWITCH GP-MAGNETIC
175-2322 SWITCH GP-MAGNETIC
175-2322 SWITCH GP-MAGNETIC -START RELAY
S/N 2RM1-99999
24-VOLT
PART OF 3E-0075 SWITCH GP-MAGNETIC
FIELD REPLACEMENT ORDER @@@@@ 3E-0075@@@@@
ALSO AN ATTACHMENT
SWITCH GP-MAGNETIC
175-2324 SWITCH GP-MAGNETIC
175-2324 SWITCH GP-MAGNETIC -START RELAY
S/N 2RM1-99999
24-VOLT
PART OF 3E-0075 SWITCH GP-MAGNETIC
FIELD REPLACEMENT ORDER @@@@@ 3E-0075@@@@@
ALSO AN ATTACHMENT
3E-0075 SWITCH GP-MAGNETIC
3E-0075 SWITCH GP-MAGNETIC -START RELAY
S/N 2RM1-99999
24-VOLT
PART OF 112-3392 STARTING AID GP, 106-3224 WIRING GP-RELAY PANEL
FIELD REPLACEMENT FOR @@@@@175-2324@@@@@, @@@@@175-2322@@@@@
ALSO AN ATTACHMENT
139-2338 SWITCH GP-SECONDARY STEERING
139-2338 SWITCH GP-SECONDARY STEERING
S/N 2RM1265-1330; 2RM1374-99999
PART OF 139-2324 STEERING AR-SECONDARY
AN ATTACHMENT
SWITCH GP-START
9G-7641 SWITCH GP-START
9G-7641 SWITCH GP-START -ENGINE, KEY
S/N 2RM1-99999
PART OF 104-1744, 111-3779 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER -FRONT-INTERMITTENT
S/N 2RM1-99999
PART OF 104-1744 PANEL GP-INSTRUMENT
WARNING GP
WARNING GP-BACKUP
133-1607 WARNING GP-BACKUP
133-1607 WARNING GP-BACKUP
S/N 2RM1-99999
AN ATTACHMENT
WARNING GP-BACKUP
8R-4113 WARNING GP-BACKUP
8R-4113 WARNING GP-BACKUP
S/N 2RM1-UP
AN ATTACHMENT
WIRING GP
BATTERY & WIRING GP
103-5783 BATTERY & WIRING GP
103-5783 BATTERY & WIRING GP
S/N 2RM1-99999
PART OF 101-8791 CHASSIS AR
WIRING GP-CAB
104-1742 WIRING GP-CAB
104-1742 WIRING GP-CAB
S/N 2RM1-99999
PART OF 101-8799 CAB AR-ENCLOSED ROPS
WIRING GP-CAB
111-7394 WIRING GP-CAB
111-7394 WIRING GP-CAB
S/N 2RM1-UP
PART OF 111-4412 CANOPY AR-OPEN ROPS
AN ATTACHMENT
WIRING GP-CAB
111-7394 WIRING GP-CAB
111-7394 WIRING GP-CAB
S/N 2RM1-99999
PART OF 111-4412 CANOPY AR-OPEN ROPS
AN ATTACHMENT
WIRING GP-ENGINE
103-5797 WIRING GP-ENGINE
103-5797 WIRING GP-ENGINE
S/N 2RM1-1136
PART OF 101-8791 CHASSIS AR
WIRING GP-ENGINE
103-5797 WIRING GP-ENGINE
103-5797 WIRING GP-ENGINE
S/N 2RM1137-99999
PART OF 101-8791 CHASSIS AR
WIRING GP-FRONT
103-5784 WIRING GP-FRONT
103-5784 WIRING GP-FRONT
S/N 2RM1-333
PART OF 101-8791 CHASSIS AR
WIRING GP-FRONT
103-5784 WIRING GP-FRONT
103-5784 WIRING GP-FRONT
S/N 2RM334-99999
PART OF 101-8791 CHASSIS AR
114-8156 WIRING GP-PLATFORM
114-8156 WIRING GP-PLATFORM
S/N 2RM1-UP
PART OF 114-8152 PLATFORM AR-NON-ROPS
AN ATTACHMENT
WIRING GP-PLATFORM
114-8156 WIRING GP-PLATFORM
114-8156 WIRING GP-PLATFORM
S/N 2RM1-1123
PART OF 114-8152 PLATFORM AR-NON-ROPS
AN ATTACHMENT
WIRING GP-PLATFORM
114-8156 WIRING GP-PLATFORM
114-8156 WIRING GP-PLATFORM
S/N 2RM1124-99999
PART OF 114-8152 PLATFORM AR-NON-ROPS
AN ATTACHMENT
WIRING GP-REAR
105-7122 WIRING GP-REAR
105-7122 WIRING GP-REAR
S/N 2RM1-UP
PART OF 101-8791 CHASSIS AR
WIRING GP-REAR
105-7122 WIRING GP-REAR
105-7122 WIRING GP-REAR
S/N 2RM1-99999
PART OF 101-8791 CHASSIS AR
WIRING GP-RELAY PANEL
106-3224 WIRING GP-RELAY PANEL
106-3224 WIRING GP-RELAY PANEL -RELAY PANEL
S/N 2RM1-99999
PART OF 103-5783 BATTERY & WIRING GP
WIRING GP-SECONDARY STEERING
113-2053 WIRING GP-SECONDARY STEERING
113-2053 WIRING GP-SECONDARY STEERING
S/N 2RM1-1264; 2RM1331-1373
PART OF 111-8928 STEERING AR-SECONDARY
Type 1
AN ATTACHMENT
WIRING GP-SECONDARY STEERING
113-2053 WIRING GP-SECONDARY STEERING
113-2053 WIRING GP-SECONDARY STEERING
S/N 2RM1-1264; 2RM1331-1373
PART OF 111-8928 STEERING AR-SECONDARY
Type 2
AN ATTACHMENT
WIRING GP-SECONDARY STEERING
139-2344 WIRING GP-SECONDARY STEERING
139-2344 WIRING GP-SECONDARY STEERING
S/N 2RM1265-1330; 2RM1374-99999
PART OF 139-2324 STEERING AR-SECONDARY
AN ATTACHMENT
WIRING GP-SENSOR
130-4730 WIRING GP-SENSOR
130-4730 WIRING GP-SENSOR
S/N 2RM1-99999
PART OF 111-8202 MONITOR AR-PAYLOAD
AN ATTACHMENT
WIRING GP-TRACTION CONTROL
109-0931 WIRING GP-TRACTION CONTROL
109-0931 WIRING GP-TRACTION CONTROL
S/N 2RM1-UP
PART OF 111-8827 CONTROL AR-TRACTION
AN ATTACHMENT
WIRING GP-TRACTION CONTROL
109-0931 WIRING GP-TRACTION CONTROL
109-0931 WIRING GP-TRACTION CONTROL
S/N 2RM1-99999
PART OF 111-8827 CONTROL AR-TRACTION
AN ATTACHMENT
ELECTRONICS GP-MONITOR
100-5778 CONTROL GP-MONITOR
100-5778 CONTROL GP-MONITOR -CATERPILLAR MONITORING SYSTEM
S/N 2RM1-99999
PART OF 104-1740, 111-7396 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR
103-5526 CONTROL GP-MONITOR -DIMMER
S/N 2RM1-99999
PART OF 104-1740, 111-7396 PANEL GP-INSTRUMENT
ALSO AN ATTACHMENT
112-1572 CONTROL GP-MONITOR
112-1572 CONTROL GP-MONITOR -PAYLOAD
S/N 2RM1-99999
PART OF 130-4856 MONITOR GP-PAYLOAD
AN ATTACHMENT
152-2667 CONTROL GP-MONITOR
152-2667 CONTROL GP-MONITOR -CATERPILLAR MONITORING SYSTEM
S/N 2RM1-99999
PART OF 100-5778 CONTROL GP-MONITOR
ALSO AN ATTACHMENT
CONTROL GP-MONITOR
165-4075 CONTROL GP-MONITOR
165-4075 CONTROL GP-MONITOR -PAYLOAD
S/N 2RM1-99999
PART OF 112-1572 CONTROL GP-MONITOR
AN ATTACHMENT
HEATER GP
111-9299 HEATER AR-AIR INLET
111-9299 HEATER AR-AIR INLET
S/N 2RM1-99999
AN ATTACHMENT
HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
S/N 2RM1-99999
240 VOLT/1000 WATT
AN ATTACHMENT
HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
3T-8724 HEATER GP-JACKET WATER
S/N 2RM1-UP
240 VOLT/1000 WATT
AN ATTACHMENT
HEATER GP-JACKET WATER
9X-3293 HEATER GP-JACKET WATER
9X-3293 HEATER GP-JACKET WATER
S/N 2RM1-UP
PART OF 9X-3294 HEATER GP-JACKET WATER
AN ATTACHMENT
HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
S/N 2RM1-UP
120 VOLT/1000 WATT
AN ATTACHMENT
HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
9X-3294 HEATER GP-JACKET WATER
S/N 2RM1-99999
120 VOLT/1000 WATT
AN ATTACHMENT

Information:

(For parts list, see above)

Special Instruction
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 262-6141 Alarm Gp {7406}
Installation of 262-6141 Alarm Gp {7406}
Technical Information Bulletin
938F/IT38F Electrical Secondary Steering Motor
938F/IT38F Electrical Secondary Steering Motor
Troubleshooting
MID 030 - CID 0271 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0271 - FMI 06
Caterpillar Monitoring System
Engine News
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Engines {1406, 7569}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Charging System Troubleshooting {1406}
Charging System Troubleshooting {1406}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure for Replacing Regulator Kit on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Procedure to Install Brush Holder Assembly to End Frame on All Engines {1405}
Specifications
Alternator
26SI Series Alternator
Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator
N3 Series Brushless Alternators
Systems Operation
General Information
26SI Series Alternator
Component Description
26SI Series Alternator
Normal Operation
26SI Series Alternator
General Information
HDB Series and M1 Series Heavy Duty Brushless Alternators
Normal Operation
HDB Series and M1 Series Heavy Duty Brushless Alternators
Component Description
HDB Series and M1 Series Heavy Duty Brushless Alternators
General Information
N3 Series Brushless Alternators
Component Description
N3 Series Brushless Alternators
Normal Operation
N3 Series Brushless Alternators
Testing and Adjusting
T1 Alternator Output - Test
26SI Series Alternator
T2 Electrical System Current - Test
26SI Series Alternator
T3 Charging System - Test
26SI Series Alternator
T4 Alternator Drive System - Check
26SI Series Alternator
T5 Alternator Current - Test
26SI Series Alternator
T6 Residual Magnetism Restoration
26SI Series Alternator
T7 Identifying Source of Current Draw - Test
26SI Series Alternator
T8 Alternator Overcharging - Test
26SI Series Alternator
Initial Troubleshooting Procedure
26SI Series Alternator
General Information
26SI Series Alternator
Component - Test
26SI Series Alternator
Charging System - Test
3114, 3116, and 3126 Engines
Field Winding - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Capacitor - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Stator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Rectifier - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Residual Magnetism - Restore
N3 Series Brushless Alternators
Regulator - Test
HDB Series and M1 Series Heavy Duty Brushless Alternators
Field Winding - Test
N3 Series Brushless Alternators
Capacitor - Test
N3 Series Brushless Alternators
Rectifier - Test
N3 Series Brushless Alternators
Stator - Test
N3 Series Brushless Alternators
Regulator - Test
N3 Series Brushless Alternators
Troubleshooting
General Information
N3 Series Brushless Alternators
Charging System
Caterpillar Monitoring System
Charging System
N3 Series Brushless Alternators
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Disassembly and Assembly
Alternator
SUPPLEMENT FOR 3116 ENGINE FOR 938F WHEEL LOADER
Alternator - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Alternator - Assemble
26SI Series Alternator
Alternator - Disassemble
26SI Series Alternator
Alternator - Disassemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - M1 Series Alternator (35 Amp)
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Disassemble - HDB Series Alternator
HDB Series and M1 Series Heavy Duty Brushless Alternators
Alternator - Assemble
N3 Series Brushless Alternators
Alternator - Disassemble
N3 Series Brushless Alternators
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
8T5314 Socket Adapter Available To Correctly Install Alternator Pulley Nut {0601}
1988/01/25
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Fabricated Spacer Will Help Prevent Fan Belt Loss{1357,1359,1405}
1995/01/16
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Charging System Troubleshooting Guide Has Been Updated for All Machines {1406, 7569}
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2007/07/01
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Engine News
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Use Of 6V3025 Battery Cable Repair Kit{0613, 1400}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Recommendations for Battery Charging and Temperatures for Machines and Generator Sets{1401, 751B}
Process for Communicating an Incident with a Battery{1401}
Process for Communicating an Incident with a Battery{1401}
Tool Operating Manual
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0077220 (NEHS1231) 115V & 230V Battery Chargers {1401, 751B}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Testing and Adjusting
Battery - Test
3114, 3116, and 3126 Engines
Troubleshooting
Charging System
Caterpillar Monitoring System
MID 161 - CID 0168 - FMI 00
Product Link - PL522/523
MID 161 - CID 0168 - FMI 01
Product Link - PL522/523
MID 161 - CID 1251 - FMI 03
Product Link - PL522/523
MID 122 - CID 0168 - FMI 00
Product Link 121S/300
MID 122 - CID 0168 - FMI 01
Product Link 121S/300
MID 122 - CID 1251 - FMI 03
Product Link 121S/300
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Alternator "R" Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, "Battery Charging Rate And Time Tables," Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
New Battery Is Now Used as a Service Replacement for Certain Cat<SUP>&reg;</SUP> Products {1401, 1926}
2014/04/24
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
Improved Sealing On Caterpillar Monitoring System And VIMS Modules Provides Resistance To Lens Fogging{7490,7601}
1997/10/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Special Instruction
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Technical Information Bulletin
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Improved Sealing On Caterpillar Monitoring System And VIMS Modules Provides Resistance To Lens Fogging{7490,7601}
1997/10/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
New Radio Software Is Now Available For Product Link 522 and 523 Radio On All Cat <SUP>&reg;</SUP> Products {7610, 7620}
2014/02/06
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2007/07/01
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
A New Electronic Control Module Wash Out Process {1901, 1920}
A New Electronic Control Module Wash Out Process {1901, 1920}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
&quot;A Series&quot; Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Using the 1U7326 Governor Calibration Bench{1264, 0778}
Governor Performance Data{1264}
Governor Performance Data{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Using the 217-0114 Adapter Cable As {0709, 1901, 1920}
Instructions for Communicating With and Flashing the <NOBR>10R-4085</NOBR> Engine Electronic Control Gp and the <NOBR>10R-1824</NOBR> Engine Electronic Control Gp {1901, 1920}
Instructions for Communicating With and Flashing the 10R-4085 Engine Electronic Control Gp and the 10R-1824 Engine Electronic Control Gp {1901, 1920}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Procedure to Flash the ADEM 3 Engine Electronic Control Gp {1901, 1920}
Service Magazine
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Download Flash Files By Using The Caterpillar Service Information System (SIS) Or SIS Web {1901, 7620}
2000/01/10
Subscriptions For Caterpillar Electronic Technician (ET) Software {7620}
2000/03/13
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Transmission Neutralizer Switch Can Be Adjusted To Adapt To Different Operating Conditions {4274,3168,3418,4265}
1995/09/11
Adjustment Of Transmission Neutralizer On The Brake Pedal To Suit Customer Conditions{4265,3168,3418}
1996/01/22
New Electronic Transmission Control Group Used{3032,3100}
1997/05/19
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Engine News
The Programmable Monitoring System Parameters Have New Descriptions {1901, 1902, 7620}
2007/10/22
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Installation of the Machine Security System (MSS) Universal Attachment Kit {7631, 7631}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Tool Operating Manual
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
PRODUCT SUPPORT PROGRAM FOR REPLACING CELLULAR PRODUCT LINK DEVICES ON CERTAIN WHEEL LOADERS, INTEGRATED TOOLCARRIERS, LANDFILL COMPACTORS, AND LANDFILL DOZERS
Service Letter-Asia
Service Letter-APD
Disassembly and Assembly
Traction Control System (TCS) Electronic Control Module
938F WHEEL LOADER POWER TRAIN
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Improved Sealing On Caterpillar Monitoring System And VIMS Modules Provides Resistance To Lens Fogging{7490,7601}
1997/10/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Flash Software Now Available For Wheel Loader Payload Control System (PCS) {7620,7494}
1999/08/09
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Operation And Maintenance Of 1P3060 Pyrometer Group{0776}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16
Check For Plugged Orifices In Mechanical Pressure Gauges{7450}
1987/03/02
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
More Potting Material Now Used In 6N5906 Electric Service Meter{7480}
1979/11/26
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Identification Of External Terminals On Alternators {1405,1406,1400}
1998/12/07
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat<SUP>&reg;</SUP> Products {1408}
2 Wire and 4 Wire Ethernet Repair Procedure on All Cat® Products {1408}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
Service Magazine
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
"Maintenance Mode" in Product Link is Used to Prevent Codes From Being Transmitted When Performing Service to a Machine or Engine {7606}
2014/11/24
Instructions for Preventing Utilization Messages Being Reported with Duplicate Time Stamps from PL321VSR Satellite Devices {7601}
2015/09/02
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
New Machine Software for Cat<SUP>&reg;</SUP> Product Link Is Now Available on Certain Cat<SUP>&reg;</SUP> Products {7490, 7606, 7610, 7620}
New Machine Software for Cat® Product Link Is Now Available on Certain Cat® Products {7490, 7606, 7610, 7620}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL321VSR Electronic Control Module (ECM) With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
Event Identification Number (EID) Above 60000 is Now Used on All Cat<SUP>&reg;</SUP> Products {1400}
Event Identification Number (EID) Above 60000 is Now Used on All Cat® Products {1400}
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Correction to Service Magazine, &quot;Improved 24 Volt Horns Available&quot; {7402}
2001/12/17
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Check 5P7435 Tee Adapter Groups In The 6V3100 Engine Timing Indicator Groups{0782}
1985/06/03
New Engine Timing Indicator Group Available {0781,0782}
1986/07/07
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Special Instruction
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Service Magazine
Improved End - of - Line - Test Fixture for the Product Link Antenna is Now Used {7606}
2006/11/13
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Installation Guide for the 35-Watt High Intensity Discharge (HID) Light{1429}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Specifications
Stop Lamp Switch Assembly<BR> 105-6117
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Parking Brake Lamp Switch Assembly<BR> 3T3132
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
A New Halogen Lamp Is Now Available for Certain Cat Products {1434}
2011/06/29
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Identification Of External Terminals On Alternators{1405,1406,1400}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Products Equipped With Diagnostic Connectors Require Less Time For Electrical Troubleshooting{1400}
1987/05/04
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Check Alternator Output Connection Prior To Machine Delivery{1405}
1987/05/18
Improved Start Switch Used{1416}
1987/05/25
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Correct Torque Value For Alternator Drive Pulley Retaining Nut Is Important{1405}
1987/11/23
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
New 35-Ampere Alternator Used On Some Engines In Caterpillar Equipment{1405,1406}
1979/08/13
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Catalytic Converter And Exhaust Conditioning Products Available{1091}
1995/01/16
All-inclusive Electrical Schematic Listing{1400}
1995/03/27
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Part Numbers for Electric Motors That Are Used in HVAC Have Changed {5927}
2001/01/22
An Improved Starting Motor is Now Available {1453}
2007/10/15
A New Starter Solenoid is Now Available {1467}
2008/03/17
Special Instruction
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Magazine
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Special Instruction
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Upgrading Alternators To Include An Integrated Circuit Regulator{1405, 1410}
Service Magazine
New Regulator And Field Coil Assemblies Used{1410,1405}
1981/11/23
Voltage Regulator Cross Reference Chart{1410,1405}
1985/07/01
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Service Letter-NACD
Product Support Program For Installing An Improved Fuel Level Sender On Certain 938F Wheel Loaders And IT38F Carriers
Product Support Program For Installing An Improved Fuel Level Sender On Certain 938F Wheel Loaders And IT38F Carriers
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Brazil
Service Letter-China
Service Letter-Asia
Systems Operation
Senders
Caterpillar Monitoring System
Service Letter-APD
Product Support Program For Installing An Improved Fuel Level Sender On Certain 938F Wheel Loaders And IT38F Carriers
Product Support Program For Installing An Improved Fuel Level Sender On Certain 938F Wheel Loaders And IT38F Carriers
Troubleshooting
MID 030 - CID 0096 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 08
Caterpillar Monitoring System
Temperature Sender
Caterpillar Monitoring System
Fuel Level Sender
Caterpillar Monitoring System
MID 030 - CID 0096 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0600 - FMI 03
Caterpillar Monitoring System
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Specifications
Wheel Speed Sensor<BR> 3E-6955
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER TRACTION
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
Caterpillar Monitoring System
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Troubleshooting
MID 030 - CID 0110 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0100 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0110 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0177 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0263 - FMI 04
Caterpillar Monitoring System
Sensor Dynamic Operation
Caterpillar Monitoring System
Pulse Width Modulated Sensor
Caterpillar Monitoring System
MID 030 - CID 0830 - FMI 08
Caterpillar Monitoring System
Sensor Signal Voltage
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0826 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 1791 - FMI 08
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0428 - FMI 04
Caterpillar Monitoring System
MID 030 - CID 0427 - FMI 04
Caterpillar Monitoring System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Traction Control System (TCS) Articulation Angle Sensor
938F WHEEL LOADER POWER TRAIN
Traction Control System (TCS) Wheel Speed Sensors (front)
938F WHEEL LOADER POWER TRAIN
Traction Control System (TCS) Wheel Speed Sensors (rear)
938F WHEEL LOADER POWER TRAIN
Engine Oil Pressure Sensor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
New Temperature Sensors Used Which Prevent False Over Temperature Warnings{1906,1400}
1996/12/23
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
A New Transmission Speed Sensor Improves the Adjustment Procedure {1907, 1912, 3064, 4803, 7493}
2000/07/31
A New Transmission Speed Sensor is Available {3175}
2001/09/17
New Rotary Position Sensors Are Used {1400}
2002/07/29
Correction to Troubleshooting Manual, &quot;Sensor Signal Voltage&quot; {5574}
2004/09/20
Correction to Service Magazine , "Improved Speed Sensors Are Now Available" {1439, 3141, 3175, 4803}
2007/06/04
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2013/02/28
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Explanation of Fuel Shutoff Solenoid Operation {1259}
2000/09/11
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Starter Solenoid Assembly May Need New Terminal {1467,1518}
1996/05/06
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Explanation of Fuel Shutoff Solenoid Operation {1259}
2000/09/11
Correction to Service Magazine, SEPD0541 , "Explanation of Fuel Shutoff Solenoid Operation" {1259}
2001/01/08
A New Mechanically Sealed Coil Has Improved Moisture Integrity Which Will Help to Extend the Life of the Coil {1554}
2002/03/25
Systems Operation
Fuel Shutoff Solenoid
3114, 3116 and 3126 MUI Engine Governors
Disassembly and Assembly
Fuel Shutoff Solenoid - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Fuel Shutoff Solenoids With Improved Durability Available {1259}
1999/03/22
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2007/07/01
Disassembly and Assembly
Ether Atomizer - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Service Magazine
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
A New Ether Cylinder O-ring is Now Used on All Caterpillar Products {1456}
2013/09/19
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Service Magazine
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Cranking Speeds Necessary To Start Diesel Engines{0374,1000,1450}
1979/09/24
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2007/07/01
Engine News
Caterpillar Remanufactured Electric Starting Motors Are Improved {1453}
2011/05/16
Special Instruction
Installation of Electric Starting Motors{1453}
Installation of Electric Starting Motors{1453}
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Starting Motor Solenoid - Replace {1467}
Starting Motor Solenoid - Replace {1467}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Some Remanufactured Electric Starter Groups May Have An Incorrect Nose Housing
Specifications
Starting Motor
37-MT, 41-MT, and 42-MT Series Starting Motors
Systems Operation
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Component Description
37-MT, 41-MT, and 42-MT Series Starting Motors
Normal Operation
37-MT, 41-MT, and 42-MT Series Starting Motors
Testing and Adjusting
Electric Starting System - Test
3114, 3116, and 3126 Engines
Pinion Clearance - Adjust
3114, 3116, and 3126 Engines
No Load - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Brush and Brush Holder - Check
37-MT, 41-MT, and 42-MT Series Starting Motors
Pinion Clearance - Adjust
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Solenoid - Test
37-MT, 41-MT, and 42-MT Series Starting Motors
Troubleshooting
Engine Does Not Crank with Starting Motor On and Pinion Engaging Ring Gear
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor Does Not Turn or Turns Slowly
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Disassembly and Assembly
Electric Starting Motor
SUPPLEMENT FOR 3116 ENGINE FOR 938F WHEEL LOADER
Electric Starting Motor - Remove and Install
3114, 3116, and 3126 Engines for Caterpillar Built Machines
Starting Motor - Disassemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
General Information
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 37-MT and 41-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Disassemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Starting Motor - Assemble - 42-MT
37-MT, 41-MT, and 42-MT Series Starting Motors
Service Magazine
Replacement Of Brush Holder Pins In Delco-Remy Electric Starting Motors{1453}
1982/06/28
Adjust Bosch Solenoid If Replaced Or Reinstalled{1407,1453}
1986/11/10
12-Volt Starter Solenoid Available For 7T2265 And 7T2266 Starting Motors{1407}
1987/02/16
Modification To Prevent Starter From Remaining Engaged With Flywheel After Engine Starts{1400,1450}
1987/03/16
Testing The Starter On The Engine{1401,1450}
1987/05/04
Remanufactured Heavy-Duty Starters And High-Amp Alternators{1405,1453}
1987/05/25
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
New PRELUB Systems Available For Medium To Large Caterpillar Construction Equipment {1319}
1992/04/06
Starter Solenoid Assembly May Need New Terminal {1467,1518}
1996/05/06
Improved Starter Solenoid Assemblies Available {1467,1518}
1996/09/02
Special Instruction, REHS1129, "Starting Motor Solenoid - Replace" Is Available {1467}
2001/08/13
Field Replacement of Remanufactured Starting Motors and Remanufactured Alternators {1405, 1453}
2001/11/19
New Starting Motors Used {1453}
2002/05/13
Examine Failed Starting Motors to Understand the Reason for Failure {1453}
2002/10/28
New Engine Cylinder Head Injector Sleeve Used In Both Mechanical Unit Injection (MUI) And Hydraulic Electronic Unit Injection (HEUI) Engines{1125}
1996/02/26
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Procedure to Install the Horn Button{7332, 7402}
Procedure to Install the Horn Button{7332, 7402}
Repair/Replacement Procedure for <NOBR> 5C-6108</NOBR> Refueling Switch {1295}
Repair/Replacement Procedure for 5C-6108 Refueling Switch {1295}
Technical Information Bulletin
Ride Control Switch
Ride Control Switch
Machine Start Switch Key May Not Fit Properly{1416}
Machine Start Switch Key May Not Fit Properly{1416}
Specifications
Switches
938F WHEEL LOADER IT38F INTEGRATED TOOLCARRIER STEERING SYST
Service Brake Low Pressure Switch Assembly<BR> 3E7693
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Neutralizer Switch Assembly<BR> 105-6118
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Stop Lamp Switch Assembly<BR> 105-6117
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Parking Brake Lamp Switch Assembly<BR> 3T3132
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER BRAKE SYS
Systems Operation
Switches
Caterpillar Monitoring System
Troubleshooting
Switch Circuits
Caterpillar Monitoring System
Disassembly and Assembly
Steering Wheel
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S
Service Magazine
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Check For Dirt Before Replacing Pyrometer Switch{1050,7466}
1986/12/15
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Use Improved Heat Start Switch{1416}
1987/04/20
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Improved Start Switch Used{1416}
1987/05/25
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
9G7641 Start Switch Is Improved{1416,1400}
1988/05/16
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Transmission Neutralizer Switch Can Be Adjusted To Adapt To Different Operating Conditions {4274,3168,3418,4265}
1995/09/11
Improved Prelube Pressure Switch Available {1400,1435,1319}
1995/09/11
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Improved Transmission Downshift Switch Available {1435,1400}
1996/05/13
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
New Pressure Switches With Improved Reliability {1435}
1999/08/09
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Key Must Be Oriented Correctly in Order to Avoid Damage to the Key or Start Switch {1416}
2003/10/27
A New Oil Pressure Switch is Now Available {7421}
2005/05/09
Improved Procedure for Verifying the Operation of the Battery Disconnect System. {1411}
2009/05/04
New Pressure Switch Is Now Used For Air Conditioner Refrigerant On Certain Cat Products {1435, 1809}
2011/06/06
An Improved 5P-8500 Key Is Now Available {1416, 1416, 7000, 7000}
2011/12/01
Truck Engine News
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
Do Not Use the 261-3363 Wireless Communication Adapter with Model Year 2007 Cat Engines and Transmissions in On-Highway Trucks {0785, 1930, 7620}
2007/10/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/04/04
Engine News
The 237-5130 Digital Multimeter Gp Features a Built-in Infrared Thermometer {0785}
2004/04/19
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Enhanced Voltmeter Leads Are Now Available {0785}
2006/02/13
Test Cable Group Checks Three-Wire, Active Analog Circuits That Are Used in Sensors {0779, 0785}
2006/10/16
277-4734 Bypass Harness Assembly Allows Cat Electronic Technician (Cat ET) to Communicate with ADEM IV:E2 Electronic Control Modules {0779, 0785, 1901, 1930}
2006/09/01
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 1900, 1901}
2014/03/28
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Use of 8T5200 Signal Generator/Counter Group{0778, 0783, 0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
Procedure to Access the License Information for Caterpillar Electronic Technician (CAT ET){0785}
An Aid To Reading Multimeter Scales{0785}
An Aid To Reading Multimeter Scales{0785}
Tool Operating Manual
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
348-5430 Multi-Tool Gp 2 {0709, 0769, 0785}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
NEHS1032: 538-5051 Communications Adapter 3 {0599, 0709, 1900, 4800, 7490, 7600}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the Communications Adapter 3{1900}
Using the Communications Adapter 3{1900}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
146-4080 Digital Multimeter Specification, Testing, and Maintenance Manual{0374, 0599, 0709}
Communication Adapter II{0600, 0709, 7600, 7610}
Communication Adapter II{0600, 0709, 7600, 7610}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
131-5051 Dataview Group and Dataview Portable Tech Station Group{0374, 0599, 0701, 0709}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
NEHS1270 TesLite and LoadProCables {0374, 0599, 0709, 0734}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
M0090131 Battery Analyzer 480-4181 (484-4859 Group) {0374, 0599, 0709, 1401, 7468}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Troubleshooting
Service Tools
N3 Series Brushless Alternators
Service Tools
37-MT, 41-MT, and 42-MT Series Starting Motors
Using Caterpillar Electronic Technician to Determine Diagnostic Codes
Caterpillar Monitoring System
Service Tools
Caterpillar Monitoring System
Service Tools
Product Link - PL522/523
Service Tools
Product Link 121S/300
Service Magazine
New Address For Repair Of Diagnostic Tools{0650}
1982/06/14
6V6124 Calibration Coil Available To Calibrate And Check 6V4910 AC/DC Clamp-On Ammeter{0651}
1982/06/28
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
Use Caterpillar 6V50 Engine Timing Indicator For Accurate Readings{0782,0785,0775}
1985/05/27
Two, New Top Dead Center Magnetic Transducers Available{0651,0653,1214,1250}
1985/10/07
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Two New Self-Powered Digital Tachometers And Signal Generator Available {7462}
1987/05/11
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Diagnostic Cables and Harnesses Are Available {0785}
2000/12/25
Caterpillar Electronic Technician (Cat ET) 2001B-Service Pack 1 Software Upgrade is Now Available {0785}
2002/02/11
New Service Information Tool for CAT Dealers is Now Available {1900}
2002/06/17
2002A Service Pack 1 for Caterpillar Electronic Technician (Cat ET) is Now Available {0785}
2002/08/19
USB Cable Connects PC with USB Ports to Communication Adapter or to DataView Tool Group {0785, 0788}
2004/03/15
Coolant/Battery Tester Group Quickly Tests Coolant and Battery Acid {0773, 0785}
2004/12/27
260-5800 Electrical Test Group Packages Digital Multimeter, Clamp-on Ammeter, Current Detector, and Test Leads in Convenient Carrying Case {0785}
2005/03/01
The 285-0910 Multi-Tool Gp Incorporates Four Diagnostic Tools into a Single, Hand Held Unit {0774, 0779, 0781, 0782}
2006/11/27
New 271-8590 Analyzer Gp (24-Volt) Quickly Identifies Starting and Charging System Problems {0709, 1406}
2006/10/02
277-2362 Transmission Analyzer III Group Offers Upgraded Diagnostic Capabilities {0769, 0779, 0783}
2007/10/22
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
New Firmware Is Now Available for Communications Adapter 3 {7610, 7620}
2011/10/20
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Software For Cat<SUP>&reg;</SUP> ET Can Now Be Used For All Caterpillar Products {0785, 7606}
2013/08/15
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
A New Communication Adapter Cable As Is Now Available For Certain Cat Products {0785}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Technical Information Bulletin
Coils Assembled Incorrectly
Coils Assembled Incorrectly
Specifications
On/Off Pilot Solenoid Valve<BR> 116-4152
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER TRACTION
Proportional Pressure Control Valve<BR> 123-9038 (Earlier Machines)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER TRACTION
Proportional Pressure Control Valve<BR> 124-3052 (Later Machines)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER TRACTION
Disassembly and Assembly
Accumulator Valve &amp; Solenoid (Ride Control Rod End)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S
Accumulator Valve &amp; Solenoid (Ride Control Head End)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S
Service Magazine
A New Coil Assembly is Now Used {5479}
2009/02/09
Special Instruction
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Installation of 244-1090 Alarm Gp {7400, 7402, 7407}
Service Magazine
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Retrofit Installation of Coolant Loss Sensor{1353, 1395, 7422, 7470}
Battery Ratings And Cross Reference Chart{1401}
Battery Ratings And Cross Reference Chart{1401}
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Ampseal 16 Connector Peripheral Seal Servicing{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Installation of CAESultra for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders{1408, 7009, 7010, 7338, 733T, 7490, 7604}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation Procedure for Product Link PL421 Retrofit{7606}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
Installation of Seat Belt Reminder Systems {1408, 1901, 1902, 7327, 7602, 7606, 7610, 7620}
DRCP Connector Repair Service Instruction {1408, 7553}
DRCP Connector Repair Service Instruction {1408, 7553}
Technical Information Bulletin
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
The 108-0358 Electronic Flasher Assembly Is Not A Drop-in Replacement For The 8D-6946 Flasher
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Senders
Caterpillar Monitoring System
Switches
Caterpillar Monitoring System
Sensors
Caterpillar Monitoring System
Action Lamp
Caterpillar Monitoring System
Action Alarm
Caterpillar Monitoring System
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electrical Connector - Inspect
Caterpillar Monitoring System
Electric Starting System - Test
3114, 3116, and 3126 Engines
Wiring Harness (Open Circuit) - Test
Caterpillar Monitoring System
Wiring Harness (Short Circuit) - Test
Caterpillar Monitoring System
Electrical Connector - Inspect
Product Link - PL522/523
Wiring Harness (Open Circuit) - Test
Product Link - PL522/523
Wiring Harness (Short Circuit) - Test
Product Link - PL522/523
Electrical Connector - Inspect
Product Link 121S/300
Wiring Harness (Open Circuit) - Test
Product Link 121S/300
Wiring Harness (Short Circuit) - Test
Product Link 121S/300
Troubleshooting
MID 030 - CID 0324 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 05
Caterpillar Monitoring System
MID 030 - CID 0324 - FMI 06
Caterpillar Monitoring System
Electrical Component and Connector Locations
Caterpillar Monitoring System
Switch Circuits
Caterpillar Monitoring System
MID 122 - CID 0269 - FMI 03
Product Link 121S/300
MID 122 - CID 0269 - FMI 04
Product Link 121S/300
Disassembly and Assembly
Traction Control System (TCS) Articulation Angle Sensor
938F WHEEL LOADER POWER TRAIN
Traction Control System (TCS) Wheel Speed Sensors (front)
938F WHEEL LOADER POWER TRAIN
Traction Control System (TCS) Wheel Speed Sensors (rear)
938F WHEEL LOADER POWER TRAIN
Service Magazine
Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29
Maintenance Free Batteries{1401}
1986/03/10
New Oil Pressure Switch Used With EMS Systems{7485}
1986/03/10
Requirements For Shipping Wet Batteries In The U.S.{1401,7500}
1986/04/07
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Heavy-Duty Line Of Batteries Available To U.S. Dealers{1400,1401}
1986/09/01
Safety Vent Caps For Caterpillar Batteries{1401}
1977/07/11
5P957 And 5P3514 Coolant And Battery Tester{0786,1395,1401}
1987/03/23
Alternator &quot;R&quot; Terminal Wire Assembly Available For Wiring Harness Repair{1408}
1987/05/04
Alternator/Generator Output Test On The Engine{1401,1404,1405,1406}
1987/05/04
Testing The Starter On The Engine{1401,1450}
1987/05/04
Be Sure Battery Cable-To-Starter Connection Has Correct Torque{1453}
1988/03/14
Maintenance-Free Batteries Require Different Troubleshooting Procedures{1401}
1988/06/20
Revised Instructions For Installation of New Maintenance Free Batteries{1401,1400}
1988/12/12
Fuse And Wire Assembly Is Available For Protection Of Earlier 6N5906 Service Meters{7480}
1979/01/29
Voltage Regulator Can Cause Variable Ammeter Indications{1410,1401,1405,1406,7467}
1979/10/22
Two Plug Assemblies (Booster Cables) Are Available To Start Machines{1401,1453}
1979/11/05
Batteries Can Be Damaged If Too Much Vacuum Is Used During Electrolyte Fill{1401}
1979/11/26
High Performance Maintenance Free Battery Available{1401}
1989/01/16
Limitations On Engine Cranking Time{1453,1401}
1989/03/27
How To Troubleshoot A Short-To-Ground In Power Wiring{1400}
1989/03/27
Preventive Maintenance For Batteries{1401}
1989/03/27
Causes And Effects Of Low Battery Voltage On Electric Starters{1401,1453,1467}
1989/04/24
Procedure For Replacing Batteries Or Battery Cables {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Procedure For Replacing Batteries, Battery Cables Or Disconnect Switches {1401,1402,1411}
1989/05/01
Special Instruction, &quot;Battery Charging Rate And Time Tables,&quot; Available On Oil Resistant Paper{0374,1401}
1989/06/19
Wiring Harness Conduit Component Sizes {1408}
1995/02/13
Transmission Control Fault Codes{3418}
1995/05/01
Improvements To Air Conditioning Hi-Lo Switch{1435,7320}
1996/01/22
Parts Manuals May List Air Conditioning Compressors Incorrectly {1802,1809,7320}
1996/10/07
Improved Relay Switch Assembly Used To Provide Increased Reliability {1423}
1996/12/02
Methods Of Obtaining Engine Flash Files {1902}
1997/01/20
Improved Switches Now Used To Prevent Open Contacts{1423}
1997/08/11
Revised Electrical Schematic Available {0374}
1997/11/17
Improved Switches Now Used To Prevent Open Contacts {1423}
1997/11/24
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
New Test Procedure For Testing Air Conditioning Electrical Components {4466,1435}
1999/11/29
Special Instruction, REHS0440 is Available for an Index of Electrical System Schematics {7566}
2000/04/10
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/10/23
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Improved Pressure Switch Now Used {1435}
2003/07/28
Service Replacement Relay is now Available {4493}
2005/05/16
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21
Parts are Now Available to Make Jump Start Receptacle on Cat<SUP>&reg;</SUP> Product {1463}
2014/03/04
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Comprehensive List of Electrical Repair and Troubleshooting Information Is Now Available for All CAT Machines {0374, 0709, 1400, 1408, 7490, 7553, 7610}
Tool Operating Manual
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Service Magazine
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553}
Magnetic Switches (Starter Relays) Improved{1450}
1988/03/14
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Engine News
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
New CAT Inspect Form Available for EMCP Troubleshooting and Inspection {0374, 4490, 7451, 7620}
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diesel Particulate Filter Monitoring System {108F, 7490}
Diesel Particulate Filter Monitoring System {108F, 7490}
Installation of Cat<SUP>&reg;</SUP> Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of Cat® Terrain for Landfill Compactors, Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Updating Certain Cat<SUP>&reg;</SUP> Machines from EMS II to EMS III {7490, 7610, 7620}
Updating Certain Cat® Machines from EMS II to EMS III {7490, 7610, 7620}
Installation of G610 Hardware for Cat<SUP>&reg;</SUP> Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Installation of G610 Hardware for Cat® Terrain for Motor Graders, Wheel Dozers, and Wheel Loaders {7605}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Installation Of Operator ID System on Cat<SUP>&reg;</SUP> and Non-Cat Products {7600, 7610, 7620}
Installation Of Operator ID System on Cat® and Non-Cat Products {7600, 7610, 7620}
Cat<SUP>&reg;</SUP> VIMS Converter Functionality {7610, 7620}
Cat® VIMS Converter Functionality {7610, 7620}
Technical Information Bulletin
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Correct Service Replacement Part Numbers For 100-5778 Caterpillar Monitoring System Control
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Third-Party Video Streaming Solution for Construction Equipment {7000, 7347, 7348, 7490}
Tool Operating Manual
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Using the 4C-8195 Control Service Tool{0374, 0599, 0709, 7490}
Systems Operation
Service Meter Mode
Caterpillar Monitoring System
Odometer Mode
Caterpillar Monitoring System
Numeric Readout Mode
Caterpillar Monitoring System
Tattletale Mode
Caterpillar Monitoring System
Units Mode
Caterpillar Monitoring System
Setup Mode
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
Component Description
Caterpillar Monitoring System
Related Components
Caterpillar Monitoring System
Scrolling Mode
Caterpillar Monitoring System
Warning Operation
Caterpillar Monitoring System
Main Display Module
Caterpillar Monitoring System
Service Mode
Caterpillar Monitoring System
Normal Mode
Caterpillar Monitoring System
Harness Code Mode
Caterpillar Monitoring System
Alert Indicator Description
Caterpillar Monitoring System
Tachometer Mode
Caterpillar Monitoring System
Calibration Mode
Caterpillar Monitoring System
Maintenance Mode
Caterpillar Monitoring System
Modes of Operation
Caterpillar Monitoring System
Testing and Adjusting
Glossary of Terms
Caterpillar Monitoring System
System Self Test
Caterpillar Monitoring System
Module - Replace
Caterpillar Monitoring System
Main Display Module Initialization - Adjust
Caterpillar Monitoring System
Connector Contact Description of Main Display Module
Caterpillar Monitoring System
Main Display Module - Flash Program
Caterpillar Monitoring System
Troubleshooting
MID 030 - CID 0248 - FMI 02
Caterpillar Monitoring System
Diagnostic Code List
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 03
Caterpillar Monitoring System
MID 030 - CID 0821 - FMI 04
Caterpillar Monitoring System
Alert Indicator Is Always Flashing
Caterpillar Monitoring System
Alert Indicator Never Flashes
Caterpillar Monitoring System
Harness Code
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 02
Caterpillar Monitoring System
General Information
Caterpillar Monitoring System
Diagnostic Capabilities
Caterpillar Monitoring System
Using Caterpillar Monitoring System to Determine Diagnostic Codes
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 15
Caterpillar Monitoring System
MID 030 - CID 0819 - FMI 31
Caterpillar Monitoring System
Service Magazine
Revised Caterpillar Monitoring System Service Manual Module Is Available {7490}
1997/06/23
New Films Used With Caterpillar Monitoring System{7490}
1997/10/06
Improved Sealing On Caterpillar Monitoring System And VIMS Modules Provides Resistance To Lens Fogging{7490,7601}
1997/10/20
Revised Special Instruction, REHS0126-02, &quot;Caterpillar Electronic Controls Service Code Information Description List&quot;, Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16
Flash Software Now Available For Wheel Loader Payload Control System (PCS) {7620,7494}
1999/08/09
Caterpillar Service Technology Group (CSTG) Software Help Desk Changes {1920}
1999/08/17
Effectivity Of Product Support Literature For Caterpillar Monitoring System {0374,7490}
1999/09/20
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Instructions for Changing the Hour Meter of Caterpillar Monitoring System Using Caterpillar Electronic Technician (ET) {7490}
2001/10/08
Latest Version of Payload Control System (PCS) Software Is Now Available {7620}
2003/11/10
New Cat Monitoring System Service Replacement {7490}
2004/11/01
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Improved VisionLink<SUP>TM</SUP> Software Is Now Available for Certain Caterpillar Machines {7601}
2012/06/07
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link 522 Systems {7494, 7606, 7620}
2012/12/14
New Electronic Monitoring System (EMS III) is Now Used on Certain Cat Products {7490}
2013/04/03
Procedure For Improving Compatibility of Product Link Is Now Available on Caterpillar Machines Equipped with Electronic Monitoring Systems (EMS) {7490, 7606}
2013/04/04
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
New Inspection and Repair Procedure Is Now Available for Cat<SUP>&reg;</SUP> Products Located in India Equipped with Product Link {7606}
2014/09/22
New Phone Number for VIMS Support Is Now Available for All Cat<SUP>&reg;</SUP> Products Equipped with VIMS {7601}
2015/03/02
New Software Is Now Available for All Cat<SUP>&reg;</SUP> Products With PL522 China System {7606, 7620}
2015/03/04
New Troubleshooting Procedure Is Now Available for all Cat<SUP>&reg;</SUP> Products Equipped with PL321 VIMS (PL321 VSR) {7606}
2015/05/12
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
New Software Is Now Available for Cat<SUP>&reg;</SUP> Product Link {7606, 7610, 7620}
New Software Is Now Available for Cat® Product Link {7606, 7610, 7620}
A New Handheld Digital Manometer is Now Available {7490}
A New Handheld Digital Manometer is Now Available {7490}
Truck Engine News
Cold Weather Operation Reminder {1000, 1250, 1350, 1355, 1450, 1453, 1456}
2007/07/01
Special Instruction
Installation of 7E-6310, 9X-3294, 6N-9125, 7E-5244 and 3T-8724 Jacket Water Heater Groups{1383}
Installation of 7E-6310, 9X-3294, 6N-9125, 7E-5244 and 3T-8724 Jacket Water Heater Groups{1383}
Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
Installation Instructions for Jacket Water Heaters with Seal Kits{1383}
Service Magazine
How To Identify Failures To Electric Jacket Water Heaters{1383}
1988/04/18
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Element Assemblies Available Within Jacket Water Heater Groups{1383}
1996/04/15
Special Instruction
Accessing Flash Software for Machines{7610, 7620}
Accessing Flash Software for Machines{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Obtaining Factory Passwords and Software Enabled Attachments{7610, 7620}
Diagnostic Code Information for Caterpillar <SUP>&reg;</SUP> Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Diagnostic Code Information for Caterpillar ® Electronic Control {1901, 1927, 1948, 3168, 4348, 4802, 4808, 4810, 5511, 5701, 7490, 7494, 7601, 7602, 7610, 7610, 7610}
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Auto Clearing of Diagnostics and Events from Electronic Control Module (ECM) {1901, 1920, 7610, 7620}
2012/08/10
Updated Flash Procedure for All Caterpillar Products {1920, 7610, 7620}
2014/09/16
New Software Flash File Extension Requires Caterpillar Electronic Technician (Cat ET) 2013B {0785, 7620}
2013/07/25
Special Instruction
Installation Instructions For Product Link 101 Inline Timer{7602}
Installation Instructions For Product Link 101 Inline Timer{7602}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
PRODUCT SUPPORT PROGRAM FOR INSTALLING PRODUCT LINK PL641 CELLULAR RADIO SYSTEMS ON CERTAIN CATERPILLAR PRODUCTS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Service Letter-APD
Service Magazine
Electronic Control Modules and Computer Viruses {7610}
2000/12/04
Parts Information for Locating Components of New Electronic Systems in SIS and Parts Manual {7602, 7631}
2001/04/09

Truck sale:

Caterpillar 938F, Construction
48,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
37,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
Caterpillar 938F, Construction
35,000 
Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT
CATERPILLAR 938F 1995
 
CATERPILLAR 938F 1995
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;
CATERPILLAR 938F 1994
 
CATERPILLAR 938F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.