HYDRAULIC SYSTEM
PUMP GPTANK GP
VALVE GP-AUXILIARY
VALVE GP-BANK
VALVE GP-COMPENSATOR
VALVE GP-CONTROL
HYDRAULIC SYSTEM
PUMP GP#SEBP23720350
134-2947: PUMP GP-PISTON
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP23720351
139-0047: PUMP GP-PISTON
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
6E-4003 | [2] | BEARING | ||
095-9805 M | [4] | BOLT-SOCKET HEAD (M14X2X40-MM) | ||
8C-7110 | [1] | CONE-BEARING | ||
3P-1210 | [1] | CONE-BEARING | ||
1P-6872 | [1] | CUP-BEARING | ||
8J-0412 | [1] | CUP-BEARING | ||
6E-6175 | [1] | CYLINDER | ||
6E-6173 | [1] | GUIDE | ||
083-4419 | [1] | PIN | ||
6E-6172 | [1] | PISTON | ||
9S-4190 | [1] | PLUG-O-RING | ||
139-0569 | [1] | PLUG | ||
6E-6174 | [1] | PLUNGER | ||
139-0570 | [1] | RING | ||
137-4424 | [1] | SEAL-O-RING | ||
137-4425 | [4] | SEAL-O-RING | ||
6E-4004 | [1] | SEAL-SHAFT | ||
212-4823 | [1] | SPACER (28X34X6.4-MM THK) | ||
6E-3999 | [1] | SPACER (49X57X3-MM THK) | ||
6E-6176 | [1] | SPRING | ||
M | METRIC PART |
#SEBP23720352
134-4553: TANK GP-HYDRAULIC
134-4553 TANK GP-HYDRAULIC
S/N 3PN1-2026
PART OF 145-4578 FRAME & TANK GP, 173-8221 FRAME GP
S/N 3PN1-2026
PART OF 145-4578 FRAME & TANK GP, 173-8221 FRAME GP
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8I-3294 | [1] | PLATE-TOP COVER | |
2. | 8I-6434 | [1] | PLUG-DRAIN | |
3. | 133-0588 | [1] | TANK AS-HYDRAULIC | |
4. | 139-5113 | [2] | BRACKET AS | |
5. | 164-2970 | [1] | FILM-OIL | |
6. | 164-7259 | [1] | GAUGE AS-SIGHT (HYDRAULIC OIL) | |
7. | 191-9020 | [1] | PLATE GP-HYDRAULIC | |
7A. | 191-9038 | [1] | TUBE AS | |
7B. | 6V-9168 | [1] | NUT (11/16-16-THD) | |
7C. | 6V-0406 | [1] | SEAL-BONDED | |
7D. | 6V-8980 | [1] | ELBOW | |
6V-8397 | [2] | SEAL-O-RING | ||
7E. | 6V-9829 | [1] | CAP AS | |
7F. | 150-8211 | [1] | PLATE AS-COVER | |
8. | 207-4204 | [2] | GASKET | |
9. | 3D-2824 | [1] | SEAL-O-RING | |
10. | 8T-4189 M | [24] | BOLT (M8X1.25X20-MM) | |
11. | 8T-4224 | [24] | WASHER-HARD (8.8X16X2-MM THK) | |
M | METRIC PART |
#SEBP23720353
8I-6696: VALVE GP-AUXILIARY
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 118-8627 Y | [1] | VALVE GP-DIVERTER | |
2. | 6V-9189 M | [2] | LOCKNUT (M8X1.25-THD) | |
3. | 8T-3647 M | [2] | BOLT (M8X1.25X80-MM) | |
4. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
5. | 6V-8639 | [2] | CONNECTOR | |
3K-0360 | [2] | SEAL-O-RING | ||
6V-8398 | [2] | SEAL-O-RING | ||
6. | 132-3726 | [4] | ADAPTER | |
3J-1907 | [4] | SEAL-O-RING | ||
3K-0360 | [4] | SEAL-O-RING | ||
7. | 5I-0508 | [2] | COUPLING AS | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP23720354
124-2575: VALVE GP-BANK 6
124-2575 VALVE GP-BANK 6
S/N 3PN1-2026
PART OF 124-5564, 124-5565 HYDRAULIC AR
Type 1
AN ATTACHMENT
S/N 3PN1-2026
PART OF 124-5564, 124-5565 HYDRAULIC AR
Type 1
AN ATTACHMENT
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 125-4543 | [1] | BRACKET | |
2. | 129-6209 Y | [1] | VALVE GP-PILOT | |
3. | 131-3456 | [1] | PLATE-GUARD | |
4. | 132-6829 | [4] | ADAPTER-SPECIAL | |
2M-9780 | [4] | SEAL-O-RING | ||
6V-8398 | [4] | SEAL-O-RING | ||
7. | 3J-1907 | [2] | SEAL-O-RING | |
10. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
11. | 6V-0852 | [2] | CAP-DUST | |
12. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
14. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
17. | 6V-8636 | [1] | CONNECTOR | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8397 | [1] | SEAL-O-RING | ||
18. | 6V-8637 | [4] | CONNECTOR | |
3D-2824 | [4] | SEAL-O-RING | ||
6V-9746 | [4] | SEAL-O-RING | ||
19. | 6V-8724 | [2] | ELBOW | |
3J-1907 | [2] | SEAL-O-RING | ||
6V-8397 | [2] | SEAL-O-RING | ||
20. | 6V-9008 | [1] | ELBOW | |
5K-9090 | [1] | SEAL-O-RING | ||
7M-8485 | [1] | SEAL-O-RING | ||
21. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
3J-1907 | [1] | SEAL-O-RING | ||
23. | 6V-9836 | [1] | TEE-SWIVEL | |
6V-8397 | [2] | SEAL-O-RING | ||
25. | 081-5645 | [1] | TEE | |
6V-8398 | [1] | SEAL-O-RING | ||
26. | 8I-3644 | [6] | COUPLING GP | |
3J-7354 | [6] | SEAL-O-RING | ||
27. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
28. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
29. | 8T-0075 | [1] | CONNECTOR | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8397 | [1] | SEAL-O-RING | ||
30. | 8T-4184 M | [1] | BOLT (M12X1.75X45-MM) | |
31. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
32. | 8T-6876 | [1] | ELBOW | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8398 | [1] | SEAL-O-RING | ||
33. | 9L-0945 | [1] | U-BOLT | |
34. | 6V-8715 | [4] | CONNECTOR | |
2M-9780 | [4] | SEAL-O-RING | ||
6V-8397 | [4] | SEAL-O-RING | ||
35. | 6V-9001 | [2] | ELBOW | |
3J-1907 | [2] | SEAL-O-RING | ||
6V-8397 | [2] | SEAL-O-RING | ||
36. | 8I-5206 | [1] | FITTING-TEE | |
6V-8397 | [1] | SEAL-O-RING | ||
37. | 5P-9617 | [4] | ADAPTER | |
3J-1907 | [4] | SEAL-O-RING | ||
38. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
39. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP23720355
124-2575: VALVE GP-BANK 6
124-2575 VALVE GP-BANK 6
S/N 3PN1-2026
PART OF 124-5564, 124-5565 HYDRAULIC AR
Type 2
AN ATTACHMENT
S/N 3PN1-2026
PART OF 124-5564, 124-5565 HYDRAULIC AR
Type 2
AN ATTACHMENT
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 125-4543 | [1] | BRACKET | |
2. | 168-6808 CY | [1] | VALVE GP-PILOT | |
3. | 131-3456 | [1] | PLATE-GUARD | |
4. | 132-6829 | [4] | ADAPTER-SPECIAL | |
2M-9780 | [4] | SEAL-O-RING | ||
6V-8398 | [4] | SEAL-O-RING | ||
7. | 3J-1907 | [2] | SEAL-O-RING | |
10. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
11. | 6V-0852 | [2] | CAP-DUST | |
12. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
13. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
14. | 6V-8185 | [2] | NUT (1/4-20-THD) | |
17. | 6V-8636 | [1] | CONNECTOR | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8397 | [1] | SEAL-O-RING | ||
18. | 6V-8637 | [4] | CONNECTOR | |
3D-2824 | [4] | SEAL-O-RING | ||
6V-9746 | [4] | SEAL-O-RING | ||
19. | 6V-8724 | [2] | ELBOW | |
3J-1907 | [2] | SEAL-O-RING | ||
6V-8397 | [2] | SEAL-O-RING | ||
20. | 6V-9008 | [1] | ELBOW | |
5K-9090 | [1] | SEAL-O-RING | ||
7M-8485 | [1] | SEAL-O-RING | ||
21. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
3J-1907 | [1] | SEAL-O-RING | ||
23. | 6V-9836 | [1] | TEE-SWIVEL | |
6V-8397 | [2] | SEAL-O-RING | ||
25. | 081-5645 | [1] | TEE | |
6V-8398 | [1] | SEAL-O-RING | ||
26. | 8I-3644 | [6] | COUPLING GP | |
(EACH INCLUDES) | ||||
132-2253 | [1] | NUT-COMPRESSION | ||
132-2254 | [1] | FERRULE | ||
132-2255 | [1] | BODY-COUPLING | ||
3J-7354 | [6] | SEAL-O-RING | ||
27. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
28. | 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | |
29. | 8T-0075 | [1] | CONNECTOR | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8397 | [1] | SEAL-O-RING | ||
30. | 8T-4184 M | [1] | BOLT (M12X1.75X45-MM) | |
31. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
32. | 8T-6876 | [1] | ELBOW | |
3J-1907 | [1] | SEAL-O-RING | ||
6V-8398 | [1] | SEAL-O-RING | ||
33. | 9L-0945 | [1] | U-BOLT | |
34. | 6V-8715 | [4] | CONNECTOR | |
2M-9780 | [4] | SEAL-O-RING | ||
6V-8397 | [4] | SEAL-O-RING | ||
35. | 6V-9001 | [2] | ELBOW | |
3J-1907 | [2] | SEAL-O-RING | ||
6V-8397 | [2] | SEAL-O-RING | ||
36. | 8I-5206 | [1] | FITTING-TEE | |
6V-8397 | [1] | SEAL-O-RING | ||
38. | 6V-7687 M | [1] | LOCKNUT (M12X1.75-THD) | |
39. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
C | CHANGE FROM PREVIOUS TYPE | |||
M | METRIC PART | |||
Y | SEPARATE ILLUSTRATION |
#SEBP23720356
117-6384: VALVE GP-COMPENSATING
117-6384 VALVE GP-COMPENSATING
S/N 3PN784-2026
PART OF 124-2580 LINES GP-CHASSIS
S/N 3PN784-2026
PART OF 124-2580 LINES GP-CHASSIS
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 119-5890 | [2] | VALVE-RELIEF | |
2. | 123-7975 | [2] | RING-BACKUP | |
8Q-2665 | [2] | SEAL-O-RING | ||
8Q-2672 | [2] | SEAL-O-RING | ||
3. | 8Q-2674 | [1] | RING-BACKUP | |
8Q-2672 | [1] | SEAL-O-RING | ||
8Q-2673 | [1] | SEAL-O-RING | ||
8Q-2675 | [1] | RING | ||
4. | 8Q-2674 | [2] | RING-BACKUP | |
8Q-2672 | [2] | SEAL-O-RING | ||
8Q-2677 | [2] | SEAL-O-RING | ||
5. | 8Q-2682 | [2] | VALVE-CHECK | |
6. | 8Q-2683 | [1] | PIVOT | |
8Q-2665 F | [2] | SEAL-O-RING | ||
8Q-2666 F | [2] | RING-BACKUP | ||
8Q-2672 F | [2] | SEAL-O-RING | ||
F | NOT SHOWN |
#SEBP23720357
131-5085: VALVE GP-CONTROL
131-5085 VALVE GP-CONTROL
S/N 3PN530-2026
(PILOT SELECTOR)
PART OF 135-7718, 172-0027 LINES GP-PILOT
AN ATTACHMENT
S/N 3PN530-2026
(PILOT SELECTOR)
PART OF 135-7718, 172-0027 LINES GP-PILOT
AN ATTACHMENT
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 139-8418 | [1] | BLOCK-MANIFOLD | |
2. | 118-1250 | [2] | VALVE-SOLENOID | |
3. | 119-6938 | [4] | SOLENOID AS | |
4. | 118-1249 | [2] | VALVE-SOLENOID | |
5. | 126-8437 | [6] | SUPPORT-FILTER | |
6. | 139-8419 | [6] | SCREEN-FILTER | |
7. | 139-8420 | [12] | SEAL-O-RING | |
8. | 127-3285 | [2] | RING-BACKUP | |
9. | 127-3282 | [2] | RING-BACKUP | |
10. | 127-3287 | [2] | RING-BACKUP | |
11. | 127-3281 | [4] | SEAL-O-RING | |
12. | 127-3283 | [2] | SEAL-O-RING | |
13. | 127-3284 | [2] | SEAL-O-RING | |
14. | 1H-1023 | [2] | SEAL-O-RING | |
15. | 127-3279 | [4] | SEAL-O-RING | |
16. | 127-3280 | [4] | SEAL-O-RING | |
17. | 121-1264 | [4] | NUT-RETAINING | |
18. | 102-8802 | [4] | KIT-RECEPTACLE (2-PIN) | |
19. | 8T-8729 | [8] | PIN-CONNECTOR (16-GA TO 18-GA) |
#SEBP23720358
173-4469: VALVE GP-CONTROL
173-4469 VALVE GP-CONTROL
S/N 3PN1-2026
PART OF 173-9742 LINES GP-PILOT
AN ATTACHMENT
S/N 3PN1-2026
PART OF 173-9742 LINES GP-PILOT
AN ATTACHMENT
Parts for your TH103 TELEHANDLER:
CATERPILLAR SIS#SEBP23720359
173-4470: VALVE GP-CONTROL
173-4470 VALVE GP-CONTROL
S/N 3PN1-2026
PART OF 173-9742 LINES GP-PILOT
AN ATTACHMENT
S/N 3PN1-2026
PART OF 173-9742 LINES GP-PILOT
AN ATTACHMENT
Parts for your TH103 TELEHANDLER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 132-2253 | [4] | NUT-COMPRESSION | |
2. | 132-2254 | [4] | FERRULE | |
3. | 138-8342 | [4] | FITTING-HYDRAULIC | |
4. | 8I-3644 | [4] | COUPLING GP | |
(EACH INCLUDES) | ||||
132-2253 | [1] | NUT-COMPRESSION | ||
132-2254 | [1] | FERRULE | ||
132-2255 | [1] | BODY-COUPLING | ||
3J-7354 | [4] | SEAL-O-RING | ||
5. | 204-9047 | [1] | VALVE AS | |
5A. | 119-6938 | [6] | SOLENOID AS | |
5B. | 204-9048 | [4] | VALVE-SOLENOID | |
6. | 6V-9872 | [2] | CONNECTOR | |
6V-8397 | [2] | SEAL-O-RING | ||
3J-7354 | [2] | SEAL-O-RING | ||
7. | 6V-9200 | [1] | ELBOW | |
6V-8397 | [1] | SEAL-O-RING | ||
3J-7354 | [1] | SEAL-O-RING | ||
8. | 3J-7354 | [4] | SEAL-O-RING |
Information:
HYDRAULIC SYSTEM
PUMP GP
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Installation of 212-4823 Spacer in the 139-0047 Piston Pump
Installation of 212-4823 Spacer in the 139-0047 Piston Pump
Installation of 212-4823 Spacer in the 139-0047 Piston Pump
Specifications
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
Service Letter-Asia
Systems Operation
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW SEAL AND SHIM TO PREVENT ENGINE STALLING ON CERTAIN TH103 TELEHANDLERS
Testing and Adjusting
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}
Disassembly and Assembly
Service Magazine