938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine WORK TOOLS Caterpillar SIS

WHEEL LOADER 938F WHEEL LOADER 7SN
938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2374 938F 7SN (1994)

Parts group 938F:

For full view, you need register

WORK TOOLS

BUCKET GP

117-1130 BUCKET AS-GENERAL PURPOSE

117-1130 BUCKET AS-GENERAL PURPOSE
S/N 7SN1-99999
2.5 CU. M. (3.25 CU. YD.). BOLT ON EDGES OR SEGMENTS
AN ATTACHMENT

123-6264 BUCKET AS-GENERAL PURPOSE

123-6264 BUCKET AS-GENERAL PURPOSE
S/N 7SN1-99999
2.3 CU M (3.00 CU YD)
AN ATTACHMENT

124-3469 BUCKET AS-GENERAL PURPOSE

124-3469 BUCKET AS-GENERAL PURPOSE
S/N 7SN1-99999
2.5 CU M (3.25 CU YD)
AN ATTACHMENT

149-7446 BUCKET AS-GENERAL PURPOSE

149-7446 BUCKET AS-GENERAL PURPOSE
S/N 7SN1-99999
2.1 CU M (2.75 CU YD)
CANNOT BE USED WITH BOLT-ON CORNER EDGE, ADAPTERS AND SEGMENTS
AN ATTACHMENT

103-7401 BUCKET AS-MATERIAL HANDLING

103-7401 BUCKET AS-MATERIAL HANDLING
S/N 7SN1-99999
2.1 CU M (2.75 CU YD)
AN ATTACHMENT

149-7443 BUCKET AS-MATERIAL HANDLING

149-7443 BUCKET AS-MATERIAL HANDLING
S/N 7SN1-99999
2.3 CU M (3.0 CU YD)
FOR USE WITH @@@@@107-3747@@@@@, @@@@@ 7T-9326@@@@@, @@@@@116-9713@@@@@, GROUND ENGAGING TOOLS (G.E.T.)
AN ATTACHMENT

149-7444 BUCKET AS-MATERIAL HANDLING

149-7444 BUCKET AS-MATERIAL HANDLING
S/N 7SN1-99999
2.5 CU M (3.25 CU YD)
FOR USE WITH @@@@@116-9713@@@@@, @@@@@ 7T-9326@@@@@, @@@@@107-3747@@@@@, GROUND ENGAGING TOOLS (G.E.T.)
AN ATTACHMENT

149-7445 BUCKET AS-MATERIAL HANDLING

149-7445 BUCKET AS-MATERIAL HANDLING
S/N 7SN1-99999
2.8 CU M (3.65 CU YD)
AN ATTACHMENT

GROUND ENGAGING TOOLS (G.E.T.)

116-9713 ADAPTER GP-TIP

116-9713 ADAPTER GP-TIP
S/N 7SN1-99999
AN ATTACHMENT

107-3747 EDGE GP-CUTTING

107-3747 EDGE GP-CUTTING
S/N 7SN1-99999
FOR USE WITH @@@@@117-1130@@@@@, BUCKET AS
AN ATTACHMENT

7T-9326 EDGE GP-CUTTING

7T-9326 EDGE GP-CUTTING
S/N 7SN1-99999
FOR USE WITH @@@@@117-1130@@@@@, G.E.T. J250 ADAPTERS
AN ATTACHMENT

500-1943 EDGE-END

500-1943 EDGE-END
S/N 7SN1-UP
FIELD INSTALLATION

9J-3169 TIP GP-LONG

9J-3169 TIP GP-LONG -J-250
S/N 7SN1-99999
PART OF 9W-8142 TIP GP-LONG
AN ATTACHMENT

9W-8142 TIP GP-LONG

9W-8142 TIP GP-LONG
S/N 7SN1-99999
FOR USE WITH @@@@@117-1130@@@@@, @@@@@116-9713@@@@@
AN ATTACHMENT

9J-3178 TIP GP-SHORT

9J-3178 TIP GP-SHORT
S/N 7SN1-99999
PART OF 9W-8143 TIP GP-SHORT
AN ATTACHMENT

9W-8143 TIP GP-SHORT

9W-8143 TIP GP-SHORT
S/N 7SN1-99999
AN ATTACHMENT

Information:

(For parts list, see above)

WORK TOOLS

BUCKET GP

Special Instruction

Inspection of Slag Buckets{6110}
Inspection of Slag Buckets{6110}

Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}
Instructions for Weld Finish of the "K" Series Adapters Installed on Large Wheel Loader Buckets{0679, 6101, 6102, 6104, 6805}

Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}
Measuring Wear on Bucket Base Edges (Determining Useful Life) {6101}

Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}
Loader and Excavator Bucket Base Edge Assembly Welding Requirements {0679, 6001, 6101, 6102, 6103, 6104, 6110, 6112, 6120, 6122, 6138, 6503, 6523, 6530, 6800, 6801, 6823}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Instructions for Welding the Cat® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}
Instructions for Welding the Cat^® Advansys™ Adapters on Excavator and Wheel Loader Buckets {0679, 6001, 6800}

Tool Operating Manual

Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}
Using the 149-0173 Choker-Style Fabric Basket to Install and Remove Bucket Teeth{0374, 0599, 0751, 6700, 6800}

Disassembly and Assembly

Tilt Lever & Link Assemblies (Front)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S

Bucket
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S

Bucket Positioner Control
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S

Service Magazine

Revised Special Instruction, SEHS8433-04, "Repair Of Wheel And Track Loader Lift Arms And Levers" Available {0374,6107,6116,6119}
1998/12/07

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

Wheel Loader Bucket Lifting Point Color Change {6001, 6101, 6102, 6104, 6110, 6131, 6132, 6529, 6531, 6704}
2011/02/24

COUPLER GP-QUICK

Disassembly and Assembly

Coupler Assembly (Quick)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S

Coupler Cylinder (Quick)
938F WHEEL LOADER AND IT38F INTEGRATED TOOLCARRIER MACHINE S

FELLER BUNCHER AR

Service Magazine

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

GROUND ENGAGING TOOLS (G.E.T.)

Special Instruction

Procedure To Install Wear Protection On Base Edges And Adapters{6800}
Procedure To Install Wear Protection On Base Edges And Adapters{6800}

Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}
Recommendations for Welding J-Series 2-Strap Bucket Adapters to Base Edges{6800, 6801, 6803}

Installation and Removal Of The Mechanically Attached Wear Plate System
Installation and Removal Of The Mechanically Attached Wear Plate System

Instructions for Welding the "K Series" Adapters{6803}
Instructions for Welding the "K Series" Adapters{6803}

398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6784 Recommended J Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
398-6786 Recommended J Series Flush Mount/Abrasion Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}
256-2928 Recommended K Series Two Strap Adapter Welding Sequence {0679, 6800, 6801, 6802, 6803, 6805}

256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}
256-2930 Recommended K Series Flush Mount/Abrasion Adapter Welding Sequence{0679, 6800, 6801, 6802, 6803, 6805}

Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}
Repairing Small Cracks In Base Edge Assemblies{0679, 6001, 6120, 6801}

Procedure for Installation and Removal of Cat® Advansys Tips {0751, 6001, 6800, 6805}
Procedure for Installation and Removal of Cat^® Advansys Tips {0751, 6001, 6800, 6805}

Specifications

Bucket Cutting Edges And End Bits
938F WHEEL LOADER IT38F INTEGRATED TOOLCARRIER HYDRAULIC SYS

Tool Operating Manual

Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}
Using 149-0174 Non-Choker Style Fabric Baskets to Install or Remove Bucket or Blade Cutting Edges{0374, 0599, 0632, 0700, 0751, 6800}

Reuse And Salvage Guidelines

Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}
Application of Abrasion Resistant Material{0374, 0679, 0751, 0759, 6800}

Service Magazine

New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}
1995/11/06

The Special Instruction, REHS0597, "Recommendation for Welding 2-Strap Bucket Adapters to Base Edges" is Available {6800, 6801, 6803}
2001/04/23

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

Correct Installation and Removal of Retainers for K Series Bucket Tips {6800, 6803, 6805}
2005/08/01

Preferred Positions for Mechanically Attached Wear Plates (MAWPS) {6100, 6120, 6820}
2009/04/27

WINCH GP

Special Instruction

"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}

TOOLS

Tool Operating Manual

Service Magazine

Pin Remover Helps the Technician Change K Series Bucket Teeth {0751}
2004/02/16

COLLECTOR AR-TREE

Polarity Connections And Use Of Service Meter Films When Service Meter Kits Are Installed{7480,7000}
1987/02/16

Truck sale:

48,000

Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT

37,000

Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT

35,000

Caterpillar 938F, Construction
- Wheel Loaders
MICHIGAN CAT

CATERPILLAR 938F 1995
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR 938F 1994
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -

938F Wheel Loader 7SN00001-UP (MACHINE) POWERED BY 3116 Engine WORK TOOLS Caterpillar SIS

Parts group 938F:

Information:

Truck sale:

Modal