AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

6I-4267 GOVERNOR GP-UNIT INJECTOR PART OF 112-4891, 6I-2388 GOVERNOR GP-UNIT INJECTOR 3116 TRUCK ENGINE


FUEL SYSTEM
GOVERNOR GP
LINES GP-FUEL
FILTER GP-FUEL
CONTROL GP-FUEL RATIO

TRUCK ENGINE 3116 TRUCK ENGINE 9LN
 3116 Truck Engine 9LN00001-UP SEBP2377 3116 9LN   (1994)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP-UNIT INJECTOR
6I-2388 GOVERNOR GP-UNIT INJECTOR
6I-2391 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-4267 GOVERNOR GP-UNIT INJECTOR
LINES GP-GOVERNOR OIL
7W-8434 LINES GP-GOVERNOR OIL
 

#SEBP23770210
 

6I-4267: GOVERNOR GP-UNIT INJECTOR

6I-4267 GOVERNOR GP-UNIT INJECTOR
PART OF 112-4891, 6I-2388 GOVERNOR GP-UNIT INJECTOR
i00157906 SEBP2377
6I4267 GOVERNOR GP-UNIT INJECTOR Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-1460 [1] RING-RETAINING  
2. 108-1612 [1] CLEVIS  
3. 6D-9953 [1] PIN-SPRING  
4. 7C-8854 [1] PIN-CLEVIS  
5. 115-2553 [1] VALVE-GOVERNOR SERVO  
6. 8C-3312 [1] RING-RETAINING  
7. 7W-7364 [1] SLEEVE-GOVERNOR SERVO  
8. 5P-9757 [1] SEAL-O-RING  
9. 108-1613 [1] PISTON-SERVO  
10. 125-8158 [1] SLEEVE-RACK CONTROL  
11. 9Y-1837 [1] SPRING  
12. 8T-7060 [1] RING-RETAINING  
13. 117-9098 [1] SLEEVE-LIMITING  
14. 7N-2171 [1] RING-RETAINING  
15. 114-1803 [1] LEVER AS  
19. 7W-5594 [1] SHAFT AS-PIVOT  
20. 8C-5899 [1] PIN-SPRING  
21. 7C-5480 [1] SPRING-TORSION  
22. 7C-8640 [1] SPRING-CAM  
23. 123-6433 [1] ARBOR AS-TORQUE CAM  
24. 5M-2057 [1] SEAL-O-RING  
25. 7E-3216 [1] BLOCK AS-BEARING  
26. 6F-5933 [2] BEARING AS-NEEDLE  
27. 7E-3217 [1] LEVER AS  
29. 8C-8546 M [9] BOLT-SOCKET HEAD (M5X0.8X14-MM)  
30. 3P-3547 [1] RING-RETAINING  
31. 4P-5743 [1] LEVER AS-LIMIT  
32. 4P-3537 [1] RING-TOLERANCE  
33. 4P-3539 [1] LEVER-THROTTLE  
34. 8T-8895 M [2] SETSCREW-SOCKET (M4X0.7X16-MM)  
35. 4W-6630 [1] LEVER  
36. 115-1192 [1] SEAL-GOVERNOR HOUSING  
37. 3T-0849 M [6] BOLT-SOCKET HEAD (M6X1X25-MM)  
38. 7W-4313 [1] WASHER (5X11X1.5-MM THK)  
39. 6I-4514 [1] HOUSING AS  
41. 7W-6104 [1] PLUG  
42. 8T-6702 M [1] SETSCREW-SOCKET (M5X0.8X20-MM)  
43. 6V-8189 [1] NUT (5/16-18-THD)  
44. 7C-6204 [1] PLUG  
45. 7L-3386 [1] SEAL-O-RING  
46. 7C-5884 [1] COVER-OIL SUMP  
47. 6V-5213 M [3] BOLT-SOCKET HEAD (M5X0.8X12-MM)  
48. 6V-5683 M [1] BOLT (M6X1X16-MM)  
49. 8T-5435 M [1] BOLT (M5X0.8X25-MM)  
50. 1N-3887 [1] SETSCREW-SOCKET (5/16-18X1.5-IN)  
51. 7C-4483 [1] SCREEN AS (OIL INLET)  
52. 6V-5100 [1] SEAL-O-RING  
53. 4P-4231 [1] COVER-REAR  
54. 5C-2874 M [2] NUT (M5X0.8-THD)  
55. 4W-6010 [1] CLAMP  
56. 8T-0269 M [3] BOLT-SOCKET HEAD (M6X1X20-MM)  
57. 7E-8794 Y [1] DRIVE GP-GOV & TRANSFER PUMP  
58. 7C-5150 [1] PIN  
59. 4P-0737 [1] SHAFT-RISER  
60. 7C-5148 [1] CARRIER-FLYWEIGHT  
61. 9X-2547 M [2] SCREW-FLAT HEAD (M5X0.8X30-MM)  
62. 2S-7316 [2] DOWEL  
63. 6V-7699 [4] WASHER-HARD (5.5X13X1.6-MM THK)  
64. 8C-8545 M [4] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
65. 7C-5541 [2] PLATE  
66. 7W-8993 [2] WEIGHT  
67. 8C-5061 [1] RING-RETAINING  
68. 7C-2743 [2] RACE  
69. 7W-5561 [1] BEARING-THRUST  
70. 7W-1440 B [8] SHIM (0.12-MM THK)  
71. 4P-8947 [1] RISER  
72. 4P-8948 [1] SEAT AS-SPRING  
74. 7C-3776 [1] PISTON AS  
75. 4N-6407 [1] SPOOL-DASHPOT  
76. 4N-6406 [1] RING-SPACER  
77. 4N-6404 [1] RING-RETAINING  
78. 7W-5591 [1] SEAT-GOVERNOR SPRING  
79. 7C-5883 B [7] SHIM (0.25-MM THK)  
80. 7C-5885 [1] WASHER (24.5X41X3-MM THK)  
81. 4P-4000 [1] SPRING-LEVER  
82. 5C-8312 M [1] NUT (M4X0.7-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23770211
 

107-6824: LINES GP-FUEL

107-6824 LINES GP-FUEL
S/N 9LN8669-8669
i00473065 SEBP2377
1076824 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8156 [2] ELBOW  
2. 3J-1907 [2] SEAL-O-RING  
3. 107-7595 [1] TUBE AS  
4. 107-7596 [1] TUBE AS  
5. 5C-7261 M [2] NUT (M8X1.25-THD)  
6. 107-7599 [2] STRAP AS  
7. 6V-8214 M [1] BOLT (M6X1X20-MM)  
8. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
9. 7E-2707 [2] CLIP  
10. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP23770212
 

113-1098: LINES GP-FUEL

113-1098 LINES GP-FUEL
S/N 9LN1-8668; 9LN8735-UP
i00472050 SEBP2377
1131098 LINES GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 030-8156 [1] ELBOW  
2. 3J-1907 [2] SEAL-O-RING  
3. 113-6268 [1] TUBE AS  
4. 107-7594 [1] TUBE AS  
5. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 7E-2707 [2] CLIP  
8. 107-7599 [2] STRAP AS  
    (EACH INCLUDES)
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
9. 6V-8214 M [2] BOLT (M6X1X20-MM)  
10. 9X-8267 [2] WASHER (6.6X12X2-MM THK)  
11. 030-7947 [1] ELBOW  
  M   METRIC PART
 

#SEBP23770213
 

113-1097: LINES GP-FUEL FILTER

113-1097 LINES GP-FUEL FILTER
S/N 9LN1-8668
i00472042 SEBP2377
1131097 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8M-9024 B [2] WASHER-HARD (10.2X22.5X5-MM THK)  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW  
5. 3J-1907 [9] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [5] SEAL-O-RING  
9. 9S-4191 [1] PLUG (9/16-18-THD)  
10. 6V-6317 BM [2] BOLT (M10X1.5X20-MM)  
11. 115-4233 [1] TUBE AS  
12. 5F-7054 [1] SEAL-O-RING  
13. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
14. 7E-5190 [1] TUBE AS  
15. 7E-5189 [1] VALVE AS (FUEL)  
16. 8T-0151 [1] ADAPTER  
17. 7X-2459 [1] ADAPTER-TEE  
18. 3N-3252 [1] SPRING  
19. 8T-0788 [1] ELBOW  
20. 3E-7410 [1] TEE  
21. 5P-7813 [1] SEAL-O-RING  
22. 2R-6806 [2] CONNECTOR  
23. 113-6267 [1] TUBE AS  
24. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
25. 6V-8774 [1] TEE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23770214
 

119-9284: LINES GP-FUEL FILTER

119-9284 LINES GP-FUEL FILTER
S/N 9LN8670-UP
FOR USE WITH @@@@@ 4P-2986@@@@@, @@@@@ 4N-3287@@@@@, @@@@@113-1098@@@@@
i00522667 SEBP2377
1199284 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
2. 6V-8724 [1] ELBOW  
3. 3J-1907 [5] SEAL-O-RING  
4. 8W-5425 I [2] HOSE AS  
5. 6V-8397 [6] SEAL-O-RING  
6. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
7. 5F-7054 [1] SEAL-O-RING  
8. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
9. 200-4504 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)  
11. 8T-0151 [1] ADAPTER  
12. 9X-2099 M [1] STUD (M8X1.25X52.75-MM)  
13. 3S-2093 [1] STRAP-CABLE  
14. 116-1859 [1] ELBOW  
15. 8T-5043 [1] ADAPTER  
16. 1J-9671 [1] SEAL-O-RING  
17. 112-6521 [1] BASE AS-FUEL FILTER  
  112-6523 [1] INSERT-FUEL FILTER  
18. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
19. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
20. 5P-7970 M [2] NUT (M8X1.25-THD)  
21. 1P-0436 [1] GASKET (FUEL PRIMING PUMP)  
22. 6N-4414 [1] COVER-FILTER BASE  
23. 1B-2790 [1] BOLT (5/16-18X1.375-IN)  
24. 7B-2742 [1] BOLT (1/4-20X1.25-IN)  
25. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
26. 5P-7813 [1] SEAL-O-RING  
27. 3N-3252 [1] SPRING  
28. 6V-9850 [1] ELBOW  
29. 8M-2773 [2] CLIP (LOOP)  
30. 4P-2413 [1] PLATE  
31. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
32. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
33. 5P-1442 E HOSE (140 CM)  
34. 9M-8406 [1] CLIP (LOOP)  
35. 6V-8774 [1] TEE  
36. 6V-5219 M [3] BOLT (M8X1.25X40-MM)  
37. 8L-5449 [3] SPACER (0.375X0.75X0.69-IN THK)  
38. 6K-8178 [2] CLIP  
39. 5C-7261 M [1] NUT (M8X1.25-THD)  
40. 115-4184 [1] TEE-O-RING PORT  
41. 5P-4924 [1] ELBOW  
42. 5P-4961 [2] CLAMP-HOSE  
43. 4P-5918 [1] CLIP  
44. 039-4966 [1] ADAPTER  
45. 068-9526 [1] CAP-TUBE  
46. 141-8288 Y [1] VALVE GP-FUEL RELIEF  
  E   ORDER BY THE CENTIMETER
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23770215
 

122-3307: LINES GP-FUEL FILTER

122-3307 LINES GP-FUEL FILTER
S/N 9LN6954-UP
Type 1
FOR USE WITH @@@@@ 6I-2693@@@@@
CANNOT BE USED WITH REAR MOUNTED FUEL FILTER
i00519432 SEBP2377
1223307 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-4312 I [1] HOSE AS  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW (90 DEGREE)  
5. 3J-1907 [8] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [8] SEAL-O-RING  
9. 6V-9836 [1] TEE-SWIVEL  
10. 6V-8636 [2] CONNECTOR  
11. 119-2257 [1] TUBE AS  
12. 6I-2422 [1] VALVE AS (FUEL RELIEF)  
  2W-3294 [1] PLUNGER AS-VALVE  
  2W-7400 [1] SPRING  
  3K-0360 [1] SEAL-O-RING  
  [1] HOUSING-VALVE  
13. 8T-0788 [1] ELBOW  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 110-4394 Y [1] PUMP GP-FUEL PRIMING  
16. 5F-7054 [1] SEAL-O-RING  
17. 7X-2459 [1] ADAPTER-TEE  
18. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
19. 7E-5190 [1] TUBE AS  
20. 9S-4191 [1] PLUG (9/16-18-THD)  
21. 3N-3252 [1] SPRING  
22. 8T-0151 [1] ADAPTER  
23. 3E-7410 [1] TEE  
24. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
25. 5P-7813 [1] SEAL-O-RING  
26. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23770216
 

122-3307: LINES GP-FUEL FILTER

122-3307 LINES GP-FUEL FILTER
S/N 9LN6954-UP
Type 2
FOR USE WITH @@@@@ 6I-2693@@@@@
CANNOT BE USED WITH REAR MOUNTED FUEL FILTER
i00544066 SEBP2377
1223307 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 119-4312 I [1] HOSE AS  
2. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 8T-4200 M [1] BOLT (M8X1.25X16-MM)  
4. 6V-8724 [1] ELBOW (90 DEGREE)  
5. 3J-1907 [8] SEAL-O-RING  
6. 7W-0183 [1] TUBE AS  
7. 9S-1350 [1] CLIP  
8. 6V-8397 [8] SEAL-O-RING  
9. 6V-9836 [1] TEE-SWIVEL  
10. 6V-8636 [2] CONNECTOR  
11. 119-2257 [1] TUBE AS  
12. 141-8288 CY [1] VALVE GP-FUEL RELIEF  
13. 8T-0788 [1] ELBOW  
14. 7E-5189 [1] VALVE AS (FUEL)  
15. 110-4394 Y [1] PUMP GP-FUEL PRIMING  
16. 5F-7054 [1] SEAL-O-RING  
17. 7X-2459 [1] ADAPTER-TEE  
18. 8T-7547 M [2] BOLT (M8X1.25X30-MM)  
19. 7E-5190 [1] TUBE AS  
20. 9S-4191 [1] PLUG (9/16-18-THD)  
21. 3N-3252 [1] SPRING  
22. 8T-0151 [1] ADAPTER  
23. 3E-7410 [1] TEE  
24. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
25. 5P-7813 [1] SEAL-O-RING  
26. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23770217
 

127-4542: LINES GP-FUEL FILTER

127-4542 LINES GP-FUEL FILTER
S/N 9LN8669-8669
i00516989 SEBP2377
1274542 LINES GP-FUEL FILTER Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-6317 M [2] BOLT (M10X1.5X20-MM)  
2. 6V-8724 [1] ELBOW  
3. 3J-1907 [2] SEAL-O-RING  
4. 8W-5425 I [1] HOSE AS  
5. 6V-8397 [5] SEAL-O-RING  
6. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
7. 5F-7054 [1] SEAL-O-RING  
8. 6V-2317 M [4] BOLT (M8X1.25X30-MM)  
9. 7E-5190 [1] TUBE AS  
10. 7E-5189 [1] VALVE AS (FUEL)  
11. 8T-0151 [1] ADAPTER  
12. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
13. 7X-7729 [2] WASHER (11X25X3-MM THK)  
14. 2T-2305 [1] ELBOW  
15. 8T-5043 [1] ADAPTER  
16. 1J-9671 [1] SEAL-O-RING  
17. 8W-5426 I [1] HOSE AS  
18. 8T-4137 M [2] BOLT (M10X1.5X20-MM)  
19. 6V-5839 [3] WASHER (11X21X2.5-MM THK)  
20. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
21. 5P-7970 M [2] NUT (M8X1.25-THD)  
22. 1P-0436 B [1] GASKET (FUEL PRIMING PUMP)  
23. 6N-4414 B [1] COVER-FILTER BASE  
24. 1B-2790 B [1] BOLT (5/16-18X1.375-IN)  
25. 7B-2742 B [1] BOLT (1/4-20X1.25-IN)  
26. 5P-0537 B [1] WASHER-HARD (7.2X14.5X2-MM THK)  
27. 5P-7813 [1] SEAL-O-RING  
28. 3N-3252 [1] SPRING  
29. 6V-9850 [1] ELBOW  
30. 002-9372 [2] CLIP  
31. 4P-2413 [1] PLATE  
32. 6V-1820 M [3] BOLT (M10X1.5X30-MM)  
33. 4N-8897 [1] BASE AS-FUEL FILTER  
34. 9S-4167 [1] STUD-HOLLOW (1-14X1.47-IN)  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP23770218
 

101-4562: LINES GP-FUEL RATIO CONTROL

101-4562 LINES GP-FUEL RATIO CONTROL
S/N 9LN6506-UP
i00463609 SEBP2377
1014562 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [2] CONNECTOR  
2. 107-7749 [1] TUBE AS-ORIFICE  
3. 4J-5477 [2] SEAL-O-RING  
4. 3J-7354 [2] SEAL-O-RING  
5. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
6. 8M-2772 [1] CLIP (LOOP)  
 

#SEBP23770219
 

4P-1518: LINES GP-FUEL RATIO CONTROL

4P-1518 LINES GP-FUEL RATIO CONTROL
S/N 9LN1-6505
i00373867 SEBP2377
4P1518 LINES GP-FUEL RATIO CONTROL Parts scheme
  For full view, you need register

Parts for your 3116 TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8647 [2] CONNECTOR  
2. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
3. 107-7749 [1] TUBE AS-ORIFICE  
4. 8M-2772 [1] CLIP (LOOP)  
5. 4J-5477 [2] SEAL-O-RING  
6. 3J-7354 [2] SEAL-O-RING  
 

Information:

Truck Engine News
Tamper Resistant Plugs And Tamper Resistant Bolts Used To Prevent Changes To Air Fuel Ratio Control (AFRC) Setting{1278,1287}
1996/01/23
Service Tool Calibration Pins For Mechanical Goverened Engines{1264,1265}
1996/07/30
New Bench Checking And Setting Procedure For Fuel Ratio Control (FRC) Mechanical Goverened Engines{1264,1265}
1996/07/30
Governor Shimming Is Determined By The Governor Test Bench Calibration{1264,1289}
1996/07/30
Replacing The Shutoff Assembly In Engines With Older Governors{1264,1289}
1996/07/30
Servo Assembly Parts Have Been Changed To Make Some Parts Common Between Mechanical Governed (Type I-VI) Engines{1264,1289}
1996/07/30
Operation and Maintenance Manual
Fuel Inlet Screen - Clean/Inspect/Replace
3116 Truck Engine
Special Instruction
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Using the 127-3458 Sleeve Replacement Tool Group{1290}
Service Letter-NACD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Australia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CFEL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-CSARL
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Americas
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Brazil
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
Service Letter-Truck/Ag/Marine
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Specifications
Governor
3116 Truck Engines
Service Letter-China
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Service Letter-Asia
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Information Release Memo
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
REMANUFACTURED GOVERNORS FOR VARIOUS 3114 AND 3116 INDUSTRIAL, MACHINE, MARINE AND ON-HIGHWAY TRUCK APPLICATIONS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
PRODUCT LINE ADDITION: REMAN 3524B HAA ENGINE AVAILABLE FOR 797A & 797B TRUCKS
Service Letter-APD
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
0R3002, 0R3003, 0R3190, 0R3389, 0R3580, 0R3742, 0R4368, 0R4369, 0R4370, 0R4374, And 0R4376 Remanufactured Unit Injectors Used On Various 3114 And 3116 Engines Need To Be Removed From Parts Stock
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
The Rivet That Holds The Governor Link To The Rack Bar Needs To Be Inspected On Certain 3116 Mechanically Unit Injected (MUI) Truck Engines
Testing and Adjusting
Governor - Adjust
3116 Truck Engine
Troubleshooting
Governor Instability
3114, 3116 and 3126 Engines
Disassembly and Assembly
Governor - Install
3116 On Highway Engines
Governor - Remove
3116 On Highway Engines

Caterpillar Parts SIS Catalog 3116 :

6I-2391 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-2388 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
6I-2388 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7326 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
130-7323 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
126-5886 GOVERNOR GP-UNIT INJECTOR
126-5885 GOVERNOR GP-UNIT INJECTOR
GOVERNOR GP-UNIT INJECTOR
112-4891 GOVERNOR GP-UNIT INJECTOR
LINES GP-FUEL
107-6824 LINES GP-FUEL
LINES GP-FUEL
113-1098 LINES GP-FUEL
LINES GP-FUEL FILTER
113-1097 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
119-9284 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
122-3307 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
122-3307 LINES GP-FUEL FILTER
LINES GP-FUEL FILTER
127-4542 LINES GP-FUEL FILTER
LINES GP-FUEL RATIO CONTROL
101-4562 LINES GP-FUEL RATIO CONTROL

Truck sale:

1998 CAT 3116
USD $14,000 
1998 CAT 3116

Milton CAT Power Systems
Milford, Massachusetts
2001 CAT 3116
USD $2,500 
2001 CAT 3116

Foley Equipment Company
Topeka Area, Kansas
 
 
2014 CAT 3116

Yoder & Frey Auctioneers
Ashland, Ohio
1989 CAT 3116
USD $22,500 
1989 CAT 3116

Martin Energy Group LLC
Ephrata, Pennsylvania
1997 CAT 3116
USD $20,997 
1997 CAT 3116

Hewitt Equipment Ltd
QUÉBEC, Quebec, Canada
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.