AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9D6505 POWER BLADE AND TIP CIRCLE GROUP 130G MOTOR GRADER


WORK TOOLS
BLADE GP
IMPLEMENTS
DRAWBAR GP
HYDRAULIC SYSTEM
DRIVE GP
MOTOR GP
VALVE GP
LINES GP-HYDRAULIC
CYLINDER GP
OPERATOR STATION
CONTROL GP-STEERING

MOTOR GRADER 130G MOTOR GRADER 7GB
 130G MOTOR GRADER 7GB01224-UP (MACHINE) SEBP2379 130G 7GB   (1983)

WORK TOOLS

BLADE GP
CIRCLE GP
9D-6505 CIRCLE GP
5R-6336 BLADE ARRANGEMENT
BLADE GP
2G-6059 BLADE GP
 

#SEBP23790230
 

9D-6505: CIRCLE GP

9D6505 POWER BLADE AND TIP CIRCLE GROUP
c308712 SEBP2379
9D6505 CIRCLE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1619 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 6G-2900 Y [1] CIRCLE ASSEM.  
    (Separate Illustration)
3. 9S-1366 [2] BOLT  
  1H-7855 [2] SPACER 3.51 cm(1.38 in.) long  
  8F-4028 [2] SPACER .64 cm(.25 in.) long  
4. 3B-4508 [44] LOCKWASHER  
5. 4B-5273 [6] WASHER  
6. 8D-5862 [1] GUARD ASSEM.  
7. 6H-1717 [42] BOLT 2.86 cm(1.125 in.) long  
8. 5D-0134 [4] STRIP (end)  
  9D-6638 [1] STRIP (center)  
9. 2G-8786 [1] BRACKET ASSEM.  
    (Includes)
10. 8S-9092 [2] BOLT 5.72 cm(2.25 in.) long  
  1A-8537 [2] BOLT 6.99 cm(2.75 in.) long  
  3B-4510 [4] LOCKWASHER  
11. 5D-6644 [10] SHIM  
12. 8D-5863 [1] GUARD ASSEM.  
13. 6D-5415 [10] PLATE  
14. 8D-5949 [1] BAR  
15. 2G-3221 [5] SHIM .15 cm(.06 in.) thick  
16. 7F-0482 [4] NUT  
17. 3B-4647 [2] COTTER PIN  
18. 2B-2673 [2] NUT  
  1D-0503 [2] WASHER  
19. 6G-9427 C [1] BRACKET (L.H.)  
  6G-9426 C [1] BRACKET (R.H.)  
20. 1D-4641 [2] BOLT  
  6K-3632 [2] NUT  
  0S-1822 [2] WASHER .64 cm(.25 in.) thick  
  7D-1446 [2] WASHER .48 cm(.188 in.) thick  
21. 6G-2947 [1] SHAFT  
22. 2K-0419 CB [4] WASHER  
  B   USE AS REQUIRED
  Y   SEPARATE ILLUSTRATION
  C   INDICATES CHANGE
 

#SEBP23790231
 

5R-7067: DRAWBAR GROUP

5R7067 DRAWBAR GROUP
Part of 5R6336 Blade Arrangement listed on Page 301
c937263 SEBP2379
5R7067 DRAWBAR GROUP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5R-7068 [1] DRAWBAR & YOKE ASSEM.  
2. 6G-5442 [1] BALL  
3. 6G-1919 [1] CAP  
4. 4D-3907 [4] SHIM  
    .76MM (.030 IN.) THICK
5. 6D-3133 [6] SHIM  
    .25MM (.010 IN.) THICK
6. 6G-1664 [1] ADAPTER  
7. 5P-8291 [5] BOLT  
8. 2H-3764 [2] BOLT  
9. 4J-8622 [4] BOLT  
10. 9H-1031 [4] WASHER  
11. 3B-8489 [1] FITTING  
12. 6G-1914 [28] SHIM  
    .76MM (.030 IN.) THICK
13. 6G-1915 [24] SHIM  
    .25MM (.010 IN.) THICK
14. 4B-3604 [8] SETSCREW  
15. 1D-5119 [8] NUT  
16. 6G-4526 [4] SHOE  
17. 3B-6753 [4] BOLT  
18. 5P-6652 [20] WASHER  
19. 6G-4524 [8] STRIP  
20. 6G-4525 [4] STRIP  
21. 1D-4616 [8] BOLT  
22. 1K-6870 [8] LOCKNUT  
 

#SEBP23790232
 

6G-1925: DRIVE GP-CIRCLE

6G1925 CIRCLE DRIVE GROUP - Top View - Part 1 of 2
Part of 5R6336 Blade Arrangement listed on Page 301
8J5407 Motor parts are shown on Page 205
c304710 SEBP2379
6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8J-5407 Y [1] MOTOR GP-GEROTOR  
2. 1B-4038 [2] CUP-ROLLER BEARING  
  1B-4046 [2] CONE-BEARING  
3. 1B-5174 [1] PLUG-PIPE  
4. 9D-1142 [1] WORM-CIRCLE DRIVE  
5. 5K-8454 [3] BOLT  
6. 3B-4508 [12] LOCKWASHER  
7. 6H-1717 [5] BOLT  
8. 2B-7410 [1] PLUG-PIPE  
9. 2H-9247 [1] SEAL-O-RING  
10. 7D-8983 [10] SHIM .127MM(.005IN)THK  
  7D-8984 [6] SHIM .178MM(.007IN)THK  
11. 4H-6996 [1] PIN-SPRING  
12. 9D-1491 [1] COUPLING  
13. 2G-6695 [1] BRACKET  
14. 1H-7339 [1] SEAL-O-RING  
15. 0S-1585 [4] BOLT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23790233
 

6G-1925: DRIVE GP-CIRCLE

6G1925 CIRCLE DRIVE GROUP - Side View - Part 2 of 2
Part of 5R6336 Blade Arrangement listed on Page 301
c937264 SEBP2379
6G1925 DRIVE GP-CIRCLE Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1D-4719 [4] NUT  
  3B-4508 [4] LOCKWASHER  
2. 6G-1908 [1] HOUSING ASSEM.  
  8D-9804 [1] HOUSING  
3. 2D-8154 [4] STUD  
4. 8D-7426 [1] BEARING  
5. 4D-2246 [4] STUD  
6. 6G-5051 [1] PINION  
7. 5F-5434 [1] VENT ASSEM.  
8. 8D-7174 [1] COVER ASSEM.  
9. 8D-7173 [1] BEARING  
10. 5H-4909 [1] SEAL  
11. 0S-1625 [9] BOLT  
  3K-2889 [9] LOCKNUT  
  2S-5658 [9] WASHER  
12. 8D-5344 [1] GEAR (36 TEETH)  
13. 1D-4609 [2] BOLT  
  7M-2360 [2] WASHER  
14. 5K-5288 R [1] SEAL GROUP  
15. 5K-5129 [2] RING  
16. 8D-7425 [2] WASHER  
17. 8D-7427 [1] SHAFT  
18. 1A-1415 [1] NUT  
  8D-7423 [1] LOCK  
  8D-7424 [1] SPACER  
19. 1K-6870 [4] NUT  
20. 5P-6652 [4] WASHER  
21. 4F-9653 [1] SEAL  
  R   REMFG PART MAY BE AVAILABLE
 

#SEBP23790234
 

8J-5407: MOTOR GP-GEROTOR

8J5407 GEROTOR MOTOR GROUP
Part of 6G1925 Circle Drive Group
shown on Page 203
c228005 SEBP2379
8J5407 MOTOR GP-GEROTOR Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3G-3711 [1] COUPLING  
2. 9J-4957 [1] SEAL  
3. 5P-7604 [1] RING  
4. 9J-4965 [1] SPACER  
5. 9J-4975 [1] WASHER  
6. 3G-3719 [1] SEAL  
7. 3G-9793 C [2] RING  
8. 3G-3724 [1] SLEEVE  
9. 3G-3715 [1] ROTOR  
10. 3G-3712 [1] MANIFOLD  
11. 9J-4963 [1] RING  
12. 0T-0513 [7] BOLT  
13. 3G-3720 [1] COVER  
14. 9J-7231 [1] PLATE ASSEM.  
15. 3G-3725 [1] PLATE  
16. 3G-3714 [1] PLATE  
17. 5P-3243 [1] BEARING  
18. 9J-4971 [1] HOUSING ASSEM.  
    (Includes)
19. 5P-3242 [1] BEARING  
20. 5P-3244 [2] RACE  
21. 5P-3240 [1] BEARING  
22. 5P-3241 [1] BEARING  
23. 3G-3702 [1] LINK  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  3G-9794 C [1] KIT (seal)  
  C   INDICATES CHANGE
 

#SEBP23790235
 

8J-5913: VALVE GP

8J5913 PILOT OPERATED CHECK VALVE GROUP
Part of 2G3490 and 8W0224 Pg. 206 and Pg. 207 Motor (Circle Drive) Lines Group
and 8D8600 & 8W0207 Pg. 262 Hydraulic Leaning Wheel Lines Groups
shown on Page 261
c207401 SEBP2379
8J5913 VALVE GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9J-0404 [2] PLUG  
  7J-9933 C [2] SEAL  
3. 9J-4871 C [2] BALL  
4. 9J-0403 [2] SPRING  
5. 9J-8285 C [1] BODY ASSEM.  
    (Includes)
6. 9J-5768 [1] PISTON  
7. 9J-0405 [2] SEAT  
  C   INDICATES CHANGE
 

#SEBP23790236
 

2G-3490: LINES GP-CIRCLE DRIVE MOTOR

2G3490 LINES GP-CIRCLE DRIVE MOTOR
5R6336 Blade Ar parts are shown on Page 9 and 8J5913 Valve Parts shown on Page 205
c304713 SEBP2379
2G3490 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-9984 C [3] ELBOW  
2. 030-8188 [3] CONNECTOR  
3. 9D-5964 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 151.97 in.(386 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  8S-6393 [1] COUPLING ASSEM. (90 degrees)  
4. 3K-0360 [6] SEAL  
5. 030-8194 [2] CONNECTOR  
  2M-9780 [2] SEAL  
6. 5D-4988 C [2] CLAMP  
7. 0L-1351 [2] BOLT  
8. 5P-1075 [7] WASHER (conical)  
9. 2G-3788 [2] HOSE ASSEM. (not serv)  
    For service of each furnish:
  2P-5943 H HOSE 86.22 in.(219 cm)  
  8S-6417 [1] COUPLING ASSEM. (straight)  
  4S-5414 [2] SLEEVE  
  1P-9919 [1] COUPLING ASSEM. (45 degrees)  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 [3] BOLT  
14. 8J-5913 Y [1] CHECK VALVE GROUP  
15. 0T-0573 [2] BOLT 69.85mm(2.75 in.)long  
  7K-4743 [2] WASHER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
  H   ORDER BY THE INCH
 

#SEBP23790237
 

8W-0224: LINES GP-CIRCLE DRIVE MOTOR

8W0224 CIRCLE DRIVE MOTOR LINES GROUP
Part of 5R6336 Blade Ar shown on Page 9
c332462 SEBP2379
8W0224 LINES GP-CIRCLE DRIVE MOTOR Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-9001 [2] ELBOW-45 DEGREE 9/16-18 THD)  
2. 6V-8634 [4] CONNECTOR-SEAL  
3. 8W-0122 [1] HOSE AS.  
4. 3K-0360 [6] SEAL (16.36MM ID)  
5. 6V-8715 [2] CONNECTOR  
  2M-9780 [2] SEAL-O-RING (19.18MM ID)  
6. 5D-4988 [2] CLAMP  
7. 0L-1351 [2] BOLT 3/8-16X.875IN)  
8. 5P-1075 [7] WASHER-HARD (3MM THK)  
9. 8W-0214 [2] HOSE AS.  
10. 2G-2562 [1] CLAMP  
11. 2G-2563 [1] CLAMP  
12. 2G-2623 [2] PLATE  
13. 0L-1143 [3] BOLT 3/8-16X2.5IN)  
14. 8J-5913 Y [1] CHECK VALVE-GP.  
15. 0T-0573 [2] BOLT 3/8-16X2.75IN)  
  7K-4743 [2] WASHER  
16. 6V-8397 [8] SEAL-O-RING (9.27MM ID)  
17. 5P-6944 [2] ADAPTER-STRAIGHT THREAD  
  3J-1907 [2] SEAL-O-RING (11.89MM ID)  
18. 8W-0123 [1] HOSE AS  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23790238
 

8D-3310: CYLINDER & MOUNTING GP

8D3310 STEERING CYLINDER AND MOUNTING GROUP
3G8069 and 3G8070 Cylinder parts are shown on Page 212
c223866 SEBP2379
8D3310 CYLINDER & MOUNTING GP Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [2] BOLT  
  3B-4506 [2] LOCKWASHER  
2. 3G-8069 C [1] CYLINDER GROUP (R. H.)  
  3G-8070 CY [1] CYLINDER GROUP (L. H.)  
    (Separate Illustration)
3. 3B-4618 [2] PIN  
4. 8D-2811 [2] WASHER  
5. 6G-1780 C [2] SOCKET GROUP  
    (Each Includes)
6. 2F-8057 [1] NUT  
7. 2H-3786 [2] NUT  
8. 8D-2429 [2] PIN ASSEM.  
9. 8D-2638 [4] SPACER  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23790239
 

6G-5405: CONTROL GP-STEERING

6G5405 STEERING CONTROL GROUP
4T3199 Pump Group parts are shown on Page 211
c308899 SEBP2379
6G5405 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 130G MOTOR GRADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6G-5374 [1] WHEEL  
2. 4T-3199 CY [1] PUMP GROUP  
3. 6V-7692 C [4] BOLT  
4. 6S-3065 [1] NUT  
  C   INDICATES CHANGE
  Y   SEPARATE ILLUSTRATION
 

Information:

Reuse And Salvage Guidelines
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Thermal Spray Procedures for Motor Grader Blade Lift Yokes{0679, 6151}
Service Magazine
New End Bits Used On Moldboards {6804}
1992/03/09
Procedure to Repair the Moldboard on Certain Motor Graders {6151, 6174, 6804}
2001/04/23

Caterpillar Parts SIS Catalog 130G :

6V-1970 LITERATURE GP
5R-6792 PAINT AND LUBRICANT GROUP (CHASSIS)
5R-5320 FRONT TOW HOOK
FRONT AXLE GROUP
5R-6350 FRONT AXLE GROUP
FRONT AXLE GROUP
5R-6350 FRONT AXLE GROUP
FRONT FRAME GROUP
5R-6345 FRONT FRAME GROUP
FRAME AND CASE GROUP
5R-6356 FRAME AND CASE GROUP
SCARIFIER SHANKS AND TIPS STORAGE BOX GROUP
5R-6354 SCARIFIER SHANKS AND TIPS STORAGE BOX GROUP
DRAWBAR GROUP
5R-7067 DRAWBAR GROUP
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE
DRIVE GP-CIRCLE
6G-1925 DRIVE GP-CIRCLE
MOTOR GP-GEROTOR
8J-5407 MOTOR GP-GEROTOR
VALVE GP
8J-5913 VALVE GP
LINES GP-CIRCLE DRIVE MOTOR
2G-3490 LINES GP-CIRCLE DRIVE MOTOR
LINES GP-CIRCLE DRIVE MOTOR
8W-0224 LINES GP-CIRCLE DRIVE MOTOR
CYLINDER & MOUNTING GP
8D-3310 CYLINDER & MOUNTING GP

Truck sale:

Caterpillar 130G
 
Caterpillar 130G
- motor graders
PETERSON CAT
 
28.500 
Caterpillar 130G, bergbau-motorgrader, Bau-Und Bergbauausrüstung


Caterpillar 130G, Construction
34,000 
Caterpillar 130G, Construction
- motor graders
PETERSON CAT
 
55,000 
Caterpillar HM 329130G, Construction
- hammer
WHEELER MACHINERY CO.
Caterpillar 130G, Construction
37,883 
Caterpillar 130G, Construction
- motor graders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.