ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGINGBATTERY GP
WIRING GP
SENSOR GP
ELECTRONICS GP-MACHINE
CONVERTER GP-ELECTRICAL
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
#SEBP23820130
9W-3043: ALTERNATOR GP-CHARGING
9W-3043 ALTERNATOR GP-CHARGING
S/N 6XR1-UP
24-VOLT, 52-AMPERE
PART OF 117-8280, 156-3870 ALTERNATOR GP-CHARGING
ALSO AN ATTACHMENT
S/N 6XR1-UP
24-VOLT, 52-AMPERE
PART OF 117-8280, 156-3870 ALTERNATOR GP-CHARGING
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8F-1434 | [2] | LOCKWASHER | |
| 2. | 8C-6141 | [1] | PLATE-SUPPORT | |
| 3. | 9W-1904 | [1] | FAN (12-BLADE) | |
| 4. | 9W-1901 M | [4] | SCREW (M5X0.8X96-MM) | |
| 5. | 8C-6149 | [1] | FRAME AS | |
| 6. | 2P-8099 | [1] | BALL BEARING | |
| 7. | 9W-1794 | [1] | COVER | |
| 8. | 8C-6146 | [1] | ROTOR | |
| 9. | 1H-3244 | [1] | LOCKWASHER | |
| 10. | 9W-1793 | [1] | BEARING | |
| 11. | 8C-6147 | [1] | STATOR | |
| 12. | 6V-9492 M | [2] | SCREW-MACHINE (M4X0.7X25-MM) | |
| 13. | 8C-6144 | [1] | RECTIFIER | |
| 14. | 8C-6148 | [1] | FRAME AS | |
| 15. | 6V-5210 M | [2] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 16. | 096-6166 | [5] | WASHER-HARD (4.5X9X1-MM THK) | |
| 17. | 105-2063 | [1] | REGULATOR AS-ALTERNATOR (24-VOLT) | |
| 18. | 9B-7233 | [1] | LOCKWASHER | |
| 19. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 20. | 5C-2890 M | [2] | NUT (M6X1-THD) | |
| 21. | 5C-2874 M | [1] | NUT (M5X0.8-THD) | |
| 22. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 24. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 25. | 5C-8312 M | [1] | NUT (M4X0.7-THD) | |
| 26. | 6V-9673 M | [1] | SCREW-MACHINE (M5X0.8X12-MM) | |
| 27. | 9W-1900 | [1] | CAPACITOR | |
| 28. | 8C-6143 | [1] | GASKET | |
| 29. | 8C-6142 | [1] | RING-FITTING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 9W-1912 | [1] | KIT-HARDWARE (ALTERNATOR AIR) | ||
| (INCLUDES SPACERS, LOCKWASHERS, NUTS, SCREWS & KEY) | ||||
| 8C-6150 | [1] | KIT-TERMINAL (ALTERNATOR AIR) | ||
| (INCLUDES NUTS, WASHERS, INSULATORS, BUSHING, STUD & CAP) | ||||
| M | METRIC PART | |||
#SEBP23820131
130-5610: BATTERY & WIRING GP
130-5610 BATTERY & WIRING GP
S/N 6XR1-UP
PART OF 122-6357 STEERING AR
AN ATTACHMENT
S/N 6XR1-UP
PART OF 122-6357 STEERING AR
AN ATTACHMENT
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 135-3327 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 2. | 4E-3184 | [1] | CABLE AS | |
| 5P-0746 E | CABLE (0-GA, BLACK)(30-CM) | |||
| 7N-5274 | [1] | COVER AS-TERMINAL (BLACK) | ||
| 8N-1725 | [1] | COVER AS-TERMINAL (RED) | ||
| 7X-1169 | [1] | TERMINAL AS-BATTERY (NEGATIVE) | ||
| 8T-9758 | [1] | TERMINAL AS (POSITIVE) | ||
| (EACH TERMINAL AS INCLUDES) | ||||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 3. | 138-6349 | [1] | CABLE AS | |
| 5P-0747 E | CABLE (00-GA, BLACK)(80-CM) | |||
| 1S-7251 | [2] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 4. | 118-1098 | [1] | PLATE | |
| 5. | 130-7933 | [1] | CABLE AS | |
| 5P-0767 E | HOSE (54-CM) | |||
| 6V-2722 D | TUBE-HEAT SHRINK (25.4-MM DIA)(2-M) | |||
| 5P-0761 E | CABLE (00-GA, RED)(250-CM) | |||
| 8N-0869 | [1] | COVER-TERMINAL (RED) | ||
| 9G-0004 | [1] | COVER AS-TERMINAL (RED) | ||
| 1S-7251 | [1] | TERMINAL-CABLE (00-GA, 1/2-IN SCREW) | ||
| 8C-5917 | [1] | TERMINAL AS-BATTERY (POSITIVE) | ||
| 1M-6119 | [1] | BOLT (5/16-18X1.375-IN) | ||
| 1M-6120 | [1] | NUT (5/16-18-THD) | ||
| 6. | 6D-3479 | [8] | CLIP (LOOP) | |
| 7. | 7X-2552 M | [1] | BOLT (M16X2X30-MM) | |
| 8. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 10. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 11. | 8T-4137 M | [7] | BOLT (M10X1.5X20-MM) | |
| 12. | 8T-7963 M | [3] | LOCKNUT (M8X1.25-THD) | |
| 13. | 148-9263 | [1] | GROMMET-SPLIT | |
| 14. | 5P-4116 | [3] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 15. | 8R-0768 | [3] | ROD-RETAINING | |
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP23820132
112-7167: BATTERY GP
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 9X-3404 | [2] | BATTERY (12-VOLT, MAINTENANCE FREE, WET) |
#SEBP23820133
132-2685: BATTERY GP
132-2685 BATTERY GP -HEAVY-DUTY
S/N 6XR1660-UP
12-VOLT, MAINTENANCE FREE, WET.
PART OF 118-0901 CHASSIS AR
S/N 6XR1660-UP
12-VOLT, MAINTENANCE FREE, WET.
PART OF 118-0901 CHASSIS AR
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS#SEBP23820134
144-3902: CONTROL GP-DIODE BLOCK
144-3902 CONTROL GP-DIODE BLOCK
S/N 6XR1-UP
PART OF 155-8919 CONTROL GP-PILOT OPERATED HYD, 149-4360 CONTROL GP-TRANSMISSION
AN ATTACHMENT
S/N 6XR1-UP
PART OF 155-8919 CONTROL GP-PILOT OPERATED HYD, 149-4360 CONTROL GP-TRANSMISSION
AN ATTACHMENT
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS#SEBP23820135
3E-7844: CONTROL GP-LIFT KICKOUT
3E-7844 CONTROL GP-LIFT KICKOUT
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS#SEBP23820136
116-2025: CONTROL GP-POSITION
116-2025 CONTROL GP-POSITION
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CONTROL AS-ELECTRONIC | ||
| [2] | PLATE | |||
| 6T-4059 | [1] | GROMMET | ||
| 2. | 9X-5617 | [1] | FILM-INSTRUCTION (SOLENOID, ELECTRICAL POWER)(KICKOUT, POSITIONER CONTROL) | |
| 3. | 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 3E-3368 | [1] | WEDGE-PLUG LOCK (3-PIN) | |
| 5. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
#SEBP23820137
3E-7843: CONTROL GP-POSITION
3E-7843 CONTROL GP-POSITION -WORK TOOL
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
S/N 6XR1-UP
PART OF 113-3652 KICKOUT & POSITIONER GP
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS#SEBP23820138
3E-5184: CONTROL GP-SECONDARY STEERING
3E-5184 CONTROL GP-SECONDARY STEERING
S/N 6XR1-UP
PART OF 113-3787 WIRING GP-SECONDARY STEERING
AN ATTACHMENT
S/N 6XR1-UP
PART OF 113-3787 WIRING GP-SECONDARY STEERING
AN ATTACHMENT
For full view, you need register
#SEBP23820139
115-1317: CONVERTER GP-ELECTRICAL
115-1317 CONVERTER GP-ELECTRICAL
S/N 6XR1-UP
PART OF 118-7244 INSTALLATION GP-RADIO
Type 1
AN ATTACHMENT
S/N 6XR1-UP
PART OF 118-7244 INSTALLATION GP-RADIO
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 928G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [1] | STRAP-CABLE | |
| 2. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 3. | 124-5638 | [1] | FILM-INFORMATION (12-VOLT) | |
| 4. | 333-1451 | [1] | CONVERTER (24-VOLT TO 12-VOLT) | |
| 5. | 222-1259 | [1] | HARNESS AS-WIRING (ELECTRICAL CONVERTER) | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-3402 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 6. | 3V-4791 | [1] | GROMMET | |
| 7. | 9X-1046 M | [2] | SCREW (M4X0.7X18-MM) | |
| M | METRIC PART | |||
Information:
ELECTRICAL AND STARTING SYSTEM
ALTERNATOR GP-CHARGING
Specifications
Testing and Adjusting
Disassembly and Assembly
