BRAKING SYSTEM
ACCUMULATOR GPBRAKE GP
CONTROL GP
LINES GP
BRAKING SYSTEM
ACCUMULATOR GP
#SEBP23830380
149-5532: ACCUMULATOR GP-HYDRAULIC
149-5532 ACCUMULATOR GP-HYDRAULIC -BRAKE-UNCHARGED
S/N 8CR1-UP
FIELD REPLACEMENT FOR @@@@@114-1151@@@@@, @@@@@140-9251@@@@@
S/N 8CR1-UP
FIELD REPLACEMENT FOR @@@@@114-1151@@@@@, @@@@@140-9251@@@@@
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 030-9613 | [2] | SCREW-FORMING (10-24X0.37-IN) | |
| 2. | 1J-9671 | [1] | SEAL-O-RING | |
| 3. | 222-2367 | [1] | VALVE GP-ACCUMULATOR CHARGING | |
| 190-3850 | [1] | CORE | ||
| 4. | 069-2536 | [1] | PROTECTOR-GAS VALVE | |
| 5. | 241-0037 | [1] | FILM-INFORMATION (HYDRAULIC ACCUMULATOR) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 160-0496 | [1] | KIT-SEAL (ACCUMULATOR) | ||
#SEBP23830381
111-9041: BRAKE GP-PARKING
For full view, you need register
#SEBP23830382
214-4769: BRAKE GP-PARKING
For full view, you need register
#SEBP23830383
9C-8683: BRAKE GP-PARKING
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 111-9041 Y | [1] | BRAKE GP-PARKING | ||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23830384
132-6799: CONTROL GP-FOOT BRAKE
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4617 | [2] | PIN-COTTER | |
| 2. | 6G-0233 | [1] | BOOT | |
| 3. | 6V-9325 M | [2] | SCREW-MACHINE (M3X0.5X30-MM) | |
| 4. | 8E-8296 | [2] | DISC-THRUST | |
| 5. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 6. | 8T-6431 | [1] | ROD END | |
| 7. | 9R-2807 | [1] | CLIP (RETAINER) | |
| 8. | 9R-3067 | [1] | PIN | |
| 9. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 10. | 112-6175 | [1] | SWITCH AS-LIMIT (TRANSMISSION NEUTRALIZER) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 11. | 123-9849 Y | [1] | VALVE GP-BRAKE CONTROL (SERVICE) | |
| 12. | 128-0168 | [1] | ROD | |
| 13. | 128-0169 | [1] | ROLLER | |
| 14. | 132-0987 | [1] | BOSS AS | |
| 15. | 132-0988 | [1] | BRACKET AS | |
| 5G-6973 M | [2] | LUG (M10X1.5-THD) | ||
| 16. | 132-0994 | [1] | END-BEARING ROD | |
| 17. | 132-3789 | [1] | PLATE | |
| 18. | 132-6181 | [1] | PLATE | |
| 19. | 132-6261 | [1] | PLATE AS | |
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 20. | 133-7675 | [1] | SPRING | |
| 21. | 134-0673 M | [2] | BOLT (M10X1.5X50-MM) | |
| 22. | 3C-6969 M | [2] | NUT (M3X0.5-THD) | |
| 23. | 4B-4863 | [2] | WASHER (4.7X11X1.2-MM THK) | |
| 24. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 25. | 5V-4410 | [2] | BUSHING | |
| 26. | 8T-4121 | [17] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 28. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 30. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 31. | 7C-6467 | [4] | PLUG | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23830385
122-6273: CONTROL GP-PARKING BRAKE
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4610 | [1] | PIN-COTTER | |
| 2. | 6V-8758 | [1] | PIN-CLEVIS | |
| 3. | 8C-6160 | [1] | CLEVIS AS | |
| 4. | 9U-0710 | [2] | CLIP | |
| 5. | 143-3193 | [1] | CABLE AS-PARKING BRAKE CONTROL | |
| 6. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 7. | 5P-9297 | [2] | CLIP (LOOP) | |
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| 9. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| 10. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| M | METRIC PART | |||
#SEBP23830386
135-5086: CONTROL GP-PARKING BRAKE
135-5086 CONTROL GP-PARKING BRAKE -HANDLE
S/N 8CR1-1861
PART OF 122-6441, 122-6471 CAB AR-ENCLOSED ROPS, 118-1124 CANOPY AR-OPEN ROPS
AN ATTACHMENT
S/N 8CR1-1861
PART OF 122-6441, 122-6471 CAB AR-ENCLOSED ROPS, 118-1124 CANOPY AR-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3H-8538 | [1] | PIN | |
| 2. | 6G-4195 | [1] | SWITCH AS-LIMIT (PARKING BRAKE) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6V-8373 | [3] | SCREW-MACHINE (6-32X0.187-IN) | ||
| 3. | 6S-6646 | [1] | PIN-COTTER | |
| 4. | 6V-9325 M | [2] | SCREW-MACHINE (M3X0.5X30-MM) | |
| 5. | 186-4415 | [1] | CLEVIS | |
| 6. | 135-5910 | [1] | LEVER AS | |
| 7. | 135-8741 | [1] | BRACKET AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 7T-1099 | [2] | LINK | ||
| 8. | 135-9930 | [1] | ANGLE | |
| 9. | 3C-6969 M | [2] | NUT (M3X0.5-THD) | |
| 10. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 11. | 8T-4189 M | [6] | BOLT (M8X1.25X20-MM) | |
| 12. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP23830387
168-7000: CONTROL GP-PARKING BRAKE
168-7000 CONTROL GP-PARKING BRAKE -HANDLE
S/N 8CR1862-UP
PART OF 149-0408 CAB AR, 122-6441, 122-6471, 149-0410, 205-0523 CAB AR-ENCLOSED ROPS, 118-1124 CANOPY AR-OPEN ROPS, 149-0412, 205-0521 OPERATOR AR
AN ATTACHMENT
S/N 8CR1862-UP
PART OF 149-0408 CAB AR, 122-6441, 122-6471, 149-0410, 205-0523 CAB AR-ENCLOSED ROPS, 118-1124 CANOPY AR-OPEN ROPS, 149-0412, 205-0521 OPERATOR AR
AN ATTACHMENT
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3H-8538 | [1] | PIN | |
| 2. | 6G-4195 | [1] | SWITCH AS-LIMIT (PARKING BRAKE) | |
| 3L-8187 | [3] | LOCKWASHER | ||
| 6V-8373 | [3] | SCREW-MACHINE (6-32X0.187-IN) | ||
| 3. | 6S-6646 | [1] | PIN-COTTER | |
| 4. | 8K-1433 | [1] | GROMMET | |
| 5. | 186-4415 | [1] | CLEVIS | |
| 6. | 163-6408 | [1] | BRACKET AS | |
| 8T-3612 M | [3] | NUT-WELD (M8X1.25-THD) | ||
| 7. | 163-6412 | [1] | LEVER AS | |
| 9R-9110 | [1] | BUTTON | ||
| 9R-9111 | [1] | SPRING-COMPRESSION | ||
| 8. | 2N-3477 | [2] | SCREW-MACHINE (6-32X1.25-IN) | |
| 9. | 4B-5324 | [4] | WASHER (3.9X9.6X1.2-MM THK) | |
| 10. | 7D-6922 | [2] | LOCKNUT (6-32-THD) | |
| 11. | 8T-4189 M | [4] | BOLT (M8X1.25X20-MM) | |
| 12. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP23830388
140-9258: CONTROL GP-SERVICE BRAKE
140-9258 CONTROL GP-SERVICE BRAKE
S/N 8CR2062-UP
PART OF 118-1001 CHASSIS AR
S/N 8CR2062-UP
PART OF 118-1001 CHASSIS AR
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-4617 | [2] | PIN-COTTER | |
| 2. | 6G-0233 | [1] | BOOT | |
| 3. | 6V-0852 | [1] | CAP-DUST | |
| 4. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 5. | 7C-6467 | [2] | PLUG | |
| 6. | 8E-8296 | [2] | DISC-THRUST | |
| 7. | 8T-6431 | [1] | ROD END | |
| 8. | 9X-2065 M | [1] | NUT (M10X1.5-THD, LH) | |
| 9. | 128-0168 | [1] | ROD | |
| 10. | 128-0169 | [1] | ROLLER | |
| 11. | 132-0988 | [1] | BRACKET AS | |
| 12. | 132-0994 | [1] | END-BEARING ROD | |
| 13. | 132-3789 | [1] | PLATE | |
| 14. | 133-7675 | [1] | SPRING | |
| 15. | 134-0673 M | [2] | BOLT (M10X1.5X50-MM) | |
| 16. | 144-8521 | [1] | VALVE GP-BRAKE CONTROL (SERVICE) | |
| 117-7799 | [1] | KIT-SEAL (BRAKE VALVE) | ||
| (INCLUDES BOOT, CUP, QUAD RING & O-RINGS) | ||||
| 117-7798 | [1] | BOOT | ||
| 17. | 146-6822 | [1] | LEVER AS | |
| 18. | 160-2609 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE) | |
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 19. | 163-7355 | [1] | SWITCH AS-PRESSURE (TRANSMISSION NEUTRALIZER) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 20. | 148-8336 | [2] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 21. | 148-8378 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 22. | 148-8443 | [1] | TEE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 7X-2459 | [1] | ADAPTER-TEE | ||
| 23. | 150-3058 | [1] | TEE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8C-8431 | [1] | TEE | ||
| 24. | 150-4027 | [1] | TEE AS | |
| 3E-2310 | [1] | TEE | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 25. | 3J-1907 | [3] | SEAL-O-RING | |
| 26. | 5V-4410 | [2] | BUSHING | |
| 27. | 8T-0389 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 28. | 8T-4121 | [15] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 30. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 31. | 8T-4196 M | [2] | BOLT (M10X1.5X35-MM) | |
| 32. | 9R-2807 | [1] | CLIP (RETAINER) | |
| 33. | 9R-3067 | [1] | PIN | |
| M | METRIC PART | |||
#SEBP23830389
118-0926: LINES GP-SERVICE BRAKE
For full view, you need register
Parts for your IT28G INTEGRATED TOOLCARRIER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [2] | CAP-DUST | |
| 2. | 6V-3965 | [2] | FITTING (QUICK DISCONNECT) | |
| 3. | 8Y-8387 | [2] | BLOCK | |
| 4. | 8Y-8388 | [1] | PLATE | |
| 5. | 8Y-8898 | [2] | TUBE AS | |
| 6. | 104-8621 I | [1] | HOSE AS | |
| 7. | 111-6940 | [2] | SPACER (13.1X15.9X36.5-MM THK) | |
| 8. | 114-1151 Y | [2] | ACCUMULATOR GP-HYDRAULIC (CHARGED) | |
| 9. | 119-4314 I | [1] | HOSE AS | |
| 10. | 125-2748 I | [1] | HOSE AS | |
| 11. | 128-0162 I | [1] | HOSE AS | |
| 12. | 128-0163 I | [2] | HOSE AS | |
| 13. | 128-0164 I | [1] | HOSE AS | |
| 14. | 128-0213 | [1] | BRACKET AS | |
| 15. | 156-4130 | [4] | CLIP-TUBE | |
| 16. | 148-8336 | [4] | CONNECTOR AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 17. | 148-8361 | [4] | ELBOW AS (90-DEG) | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9200 | [1] | ELBOW | ||
| 18. | 148-8378 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 19. | 148-8416 | [1] | REDUCER AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8939 | [1] | REDUCER-O-RING | ||
| 20. | 148-8433 | [1] | TEE AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-9836 | [1] | TEE-SWIVEL | ||
| 21. | 148-8434 | [1] | TEE AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-9843 | [1] | TEE | ||
| 22. | 148-8435 | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8781 | [1] | TEE | ||
| 23. | 148-8443 | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 7X-2459 | [1] | ADAPTER-TEE | ||
| 24. | 3J-1907 | [2] | SEAL-O-RING | |
| 25. | 6V-8555 | [1] | NUT-FACE SEAL (1-14-THD) | |
| 26. | 7J-9108 | [1] | SEAL-O-RING | |
| 27. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 28. | 8M-2773 | [6] | CLIP (LOOP) | |
| 29. | 8T-4121 | [7] | WASHER-HARD (11X21X2.5-MM THK) | |
| 30. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 31. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 32. | 8T-5005 M | [2] | BOLT (M10X1.5X70-MM) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
