AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

119-8200 CONDENSER GP-REFRIGERANT S/N 8CR1-UP PART OF 122-6500 LINES GP-AIR CONDITIONER AN ATTACHMENT IT28G


OPERATOR STATION
AIR CONDITIONER GP
CONSOLE GP
CONTROL GP-HANDLE
CONTROL GP-PILOT OPERATED HYD

INTEGRATED TOOLCARRIER IT28G INTEGRATED TOOLCARRIER 8CR
 IT28G Integrated Toolcarrier 8CR00001-UP (MACHINE) POWERED BY 3116 Engine SEBP2383 IT28G 8CR   (1996)

OPERATOR STATION

AIR CONDITIONER GP
COMPRESSOR GP-REFRIGERANT
106-5122 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
3E-1909 COMPRESSOR GP-REFRIGERANT
CONDENSER GP-REFRIGERANT
119-8200 CONDENSER GP-REFRIGERANT
383-3518 KIT-AIR CONDITIONER
LINES GP-AIR CONDITIONER
122-6500 LINES GP-AIR CONDITIONER
LINES GP-AIR CONDITIONER
122-6500 LINES GP-AIR CONDITIONER
 

#SEBP23830630
 

119-8200: CONDENSER GP-REFRIGERANT

119-8200 CONDENSER GP-REFRIGERANT
S/N 8CR1-UP
PART OF 122-6500 LINES GP-AIR CONDITIONER
AN ATTACHMENT
i00201834 SEBP2383
1198200 CONDENSER GP-REFRIGERANT Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-5239 [1] RELAY AS (24-VOLT)(HEATER, AIR CONDITIONER)  
2. 3S-2093 [7] STRAP-CABLE  
3. 7T-5856 [4] CLAMP  
4. 8C-3756 [1] FILM-IDENTIFICATION (AIR CONDITIONER)  
5. 9X-3452 [2] GUARD AS-FAN  
6. 118-5045 [1] CASE AS-CONDENSER  
7. 124-8490 [1] HARNESS AS-HEATER & AIR COND  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  8T-8729 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0844 [4] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  9X-1054 [1] PLUG AS-CONNECTOR (4-PIN)  
  9X-1056 [4] TERMINAL-RECEPTACLE (14-GA TO 16-GA)  
  155-2270 [2] KIT-CONNECTING PLUG (2-PIN)  
    (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 124-8492 [1] COIL AS-CONDENSER  
9. 142-8620 [2] FAN AS-CONDENSER (4-BLADE)  
    (EACH INCLUDES)
  3H-7180 [1] SETSCREW (1/4-28X0.25-IN)  
10. 174-1495 [2] MOTOR GP-ELECTRIC  
    (EACH INCLUDES)
  9W-0852 [2] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 2V-8260 [1] GROMMET  
12. 5C-2890 M [1] NUT (M6X1-THD)  
13. 5C-9553 M [4] BOLT (M6X1X16-MM)  
14. 5P-8438 [1] GROMMET  
15. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 8T-4136 M [8] BOLT (M10X1.5X25-MM)  
18. 8T-4205 [5] WASHER-HARD (7.2X14.5X2-MM THK)  
19. 5P-5908 D SEAL (1-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP23830631
 

149-4612: CONSOLE GP-OPERATOR

149-4612 CONSOLE GP-OPERATOR
S/N 8CR1-UP
PART OF 122-6364, 122-6365, 122-6366, 122-6367 HYDRAULIC AR, 122-6323, 122-6325, 155-8914 HYDRAULIC AR-3 VALVE, 122-6327, 122-6328, 155-8916 HYDRAULIC AR-4 VALVE, 155-8915, 155-8917 HYDRAULIC AR-CHECK VALVE
AN ATTACHMENT
i01104601 SEBP2383
1494612 CONSOLE GP-OPERATOR Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4E-1062 [1] CUSHION AS-ARMREST  
2. 111-0149 [1] SUPPORT AS  
3. 111-7875 [1] PLATE  
4. 226-1832 [1] COVER AS  
5. 187-2082 [1] LEVER-CONTROL  
6. 3E-8020 M [2] SCREW-TRUSS HEAD (M6X1X25-MM)  
7. 8T-4138 M [2] BOLT (M6X1X20-MM)  
8. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 9X-2042 M [6] SCREW-TRUSS HEAD (M6X1X12-MM)  
10. 3E-3892 E SEAL (76-CM)  
11. 3E-3892 E SEAL (120-CM)  
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP23830632
 

148-9562: CONTROL GP-HANDLE

148-9562 CONTROL GP-HANDLE -DOWNSHIFT-JOYSTICK, 3-FUNCTION
S/N 8CR1-UP
PART OF 149-4358 CONTROL GP-HANDLE
AN ATTACHMENT
i01038390 SEBP2383
1489562 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
 

#SEBP23830633
 

149-4358: CONTROL GP-HANDLE

149-4358 CONTROL GP-HANDLE -TRANSMISSION DOWNSHIFT
S/N 8CR1-UP
PART OF 205-1173 CONVERSION GP-PILOT CONTROL, 122-6365, 122-6367 HYDRAULIC AR, 122-6325 HYDRAULIC AR-3 VALVE, 122-6328 HYDRAULIC AR-4 VALVE
CANNOT BE USED WITH @@@@@149-4360@@@@@
AN ATTACHMENT
i00961134 SEBP2383
1494358 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 150-1293 M [2] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 8T-8737 [4] PLUG-SEAL  
3. 148-9562 Y [1] CONTROL GP-HANDLE (TRANSMISSION DOWNSHIFT)  
4. 149-4359 [1] ROD-CONTROL  
5. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 8T-4244 M [1] NUT (M12X1.75-THD)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830634
 

122-6331: CONTROL GP-PILOT OPERATED HYD

122-6331 CONTROL GP-PILOT OPERATED HYD
S/N 8CR1-3242
PART OF 122-6366 HYDRAULIC AR, 122-6327 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
i00520555 SEBP2383
1226331 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [1] LOCKWASHER  
2. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 4M-2381 [1] SPRING  
4. 7Y-3173 M [1] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
5. 8T-8737 [4] PLUG-SEAL  
6. 9R-1948 [2] RIVET  
7. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
8. 107-6037 [1] SWITCH AS-KICKOUT  
  111-7899 [1] GASKET  
9. 107-6050 [1] SUPPORT AS  
10. 114-3937 [1] ROD  
11. 114-3938 [1] TAB  
12. 114-3940 [2] ROD  
13. 114-3949 [1] LOCK AS  
14. 124-4401 [3] KNOB  
15. 124-6913 [1] ROD  
16. 125-2877 Y [1] VALVE GP-PILOT (4-FUNCTION)  
17. 133-8597 [1] HANDLE AS  
  5I-3762 [1] KNOB  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
18. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
19. 141-9192 [1] PLATE-INSTRUMENT  
20. 143-9069 [2] ROD  
21. 143-9354 Y [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
22. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
23. 5C-7261 M [4] NUT (M8X1.25-THD)  
24. 6V-5683 M [2] BOLT (M6X1X16-MM)  
25. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
26. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
27. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4244 M [4] NUT (M12X1.75-THD)  
29. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
30. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830635
 

122-6331: CONTROL GP-PILOT OPERATED HYD

122-6331 CONTROL GP-PILOT OPERATED HYD
S/N 8CR3243-UP
PART OF 122-6366 HYDRAULIC AR, 122-6327 HYDRAULIC AR-4 VALVE
AN ATTACHMENT
i01627057 SEBP2383
1226331 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7Y-3173 M [1] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
2. 8T-8737 [4] PLUG-SEAL  
3. 9R-1948 [2] RIVET  
4. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
5. 107-6037 [1] SWITCH AS-KICKOUT  
  111-7899 [1] GASKET  
6. 107-6050 [1] SUPPORT AS  
7. 114-3937 [1] ROD  
8. 114-3940 [2] ROD  
9. 124-4401 [3] KNOB  
10. 124-6913 [1] ROD  
11. 133-8597 [1] HANDLE AS  
  5I-3762 [1] KNOB  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
13. 141-9191 [1] PLATE-INSTRUCTION (BUCKET CONTROL)  
14. 172-3205 Y [1] VALVE GP-PILOT (4-FUNCTION)  
15. 208-9665 Y [1] VALVE GP-SHUTOFF  
16. 1H-4393 [1] LOCKWASHER  
17. 102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
18. 3E-3383 [1] WEDGE-RECEPTACLE LOCK (6-PIN)  
19. 5C-7261 M [4] NUT (M8X1.25-THD)  
20. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
22. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
23. 8T-4244 M [4] NUT (M12X1.75-THD)  
24. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830636
 

122-6332: CONTROL GP-PILOT OPERATED HYD

122-6332 CONTROL GP-PILOT OPERATED HYD
S/N 8CR1-UP
PART OF 122-6367 HYDRAULIC AR, 122-6328 HYDRAULIC AR-4 VALVE
Type 1
AN ATTACHMENT
i00520586 SEBP2383
1226332 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [1] LOCKWASHER  
2. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 6R-3354 [1] BOOT-PROTECTION  
4. 4M-2381 [1] SPRING  
5. 7Y-3173 M [4] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
6. 7X-1886 [1] SWITCH AS-BALL  
  141-4859 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 107-6037 [1] SWITCH AS-KICKOUT (HYD LOCKOUT DETENT OVERRIDE)  
  111-7899 [1] GASKET  
9. 107-6050 [1] SUPPORT AS  
10. 112-1817 [1] VALVE-BALL  
  112-9861 [1] KIT-SEAL  
    (INCLUDES SEALS, 0-RING CONNECTORS, THRUST RING & O-RING STEM)
11. 124-6913 [1] ROD  
12. 114-3937 [1] ROD  
13. 114-3938 [1] TAB  
14. 114-3940 [1] ROD  
15. 114-3949 [1] LOCK AS  
16. 143-9069 [2] ROD  
17. 9R-1948 [2] RIVET  
18. 122-6348 Y [1] VALVE GP-PILOT (JOYSTICK, 4-FUNCTION)  
19. 124-4401 [2] KNOB  
20. 127-8768 [1] CAP  
21. 114-3948 [1] LEVER AS  
22. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
23. 141-9194 [1] PLATE-INSTRUMENT  
24. 133-8597 [1] HANDLE AS  
  5I-3762 [1] KNOB  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
25. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
26. 5C-7261 M [4] NUT (M8X1.25-THD)  
27. 6V-5683 M [2] BOLT (M6X1X16-MM)  
28. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
29. 8T-4244 M [3] NUT (M12X1.75-THD)  
30. 8T-8737 [2] PLUG-SEAL  
31. 9G-5687 [1] GROMMET  
32. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
33. 8T-4138 M [1] BOLT (M6X1X20-MM)  
34. 121-0254 [1] PLATE (6-MM THK)  
35. 121-0255 [1] SPACER (1.3-MM THK)  
36. 121-0256 [1] PLATE (4-MM THK)  
37. 140-1344 [1] SPACER (20X25X4-MM THK)  
38. 2Y-5671 B [3] WASHER (19.43X33X0.91-MM THK)  
39. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
40. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
41. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830637
 

122-6332: CONTROL GP-PILOT OPERATED HYD

122-6332 CONTROL GP-PILOT OPERATED HYD
S/N 8CR1-UP
PART OF 122-6367 HYDRAULIC AR, 122-6328, 155-8916 HYDRAULIC AR-4 VALVE, 155-8917 HYDRAULIC AR-CHECK VALVE
Type 2
AN ATTACHMENT
i00718680 SEBP2383
1226332 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4M-2381 [1] SPRING  
2. 9R-1948 [2] RIVET  
3. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
4. 107-6037 [1] SWITCH AS-KICKOUT  
  111-7899 [1] GASKET  
5. 107-6050 [1] SUPPORT AS  
6. 114-3937 [1] ROD  
7. 114-3938 [1] TAB  
8. 114-3940 [1] ROD  
9. 114-3949 [1] LOCK AS  
10. 122-6348 Y [1] VALVE GP-PILOT (JOYSTICK, 4-FUNCTION)  
11. 124-4401 [2] KNOB  
12. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
13. 141-9194 [1] PLATE-INSTRUMENT  
14. 143-9069 [2] ROD  
15. 143-9354 YC [1] VALVE GP-SHUTOFF (HYDRAULIC LOCKOUT)  
16. 5C-7261 M [4] NUT (M8X1.25-THD)  
17. 6V-5683 M [2] BOLT (M6X1X16-MM)  
18. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
19. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
20. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
21. 8T-4244 M [2] NUT (M12X1.75-THD)  
22. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
23. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830638
 

122-6332: CONTROL GP-PILOT OPERATED HYD

122-6332 CONTROL GP-PILOT OPERATED HYD
S/N 8CR1-UP
PART OF 122-6367 HYDRAULIC AR, 122-6328, 155-8916 HYDRAULIC AR-4 VALVE, 155-8917 HYDRAULIC AR-CHECK VALVE
Type 3
AN ATTACHMENT
i01626727 SEBP2383
1226332 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9R-1948 [2] RIVET  
2. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
3. 107-6037 [1] SWITCH AS-KICKOUT  
  111-7899 [1] GASKET  
4. 107-6050 [1] SUPPORT AS  
5. 114-3937 [1] ROD  
6. 114-3940 [1] ROD  
7. 124-4401 [2] KNOB  
8. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
9. 141-9193 [1] PLATE-INSTRUMENT  
10. 172-3206 Y [1] VALVE GP-PILOT (JOYSTICK, 4-FUNCTION)  
11. 208-9665 CY [1] VALVE GP-SHUTOFF  
12. 5C-7261 M [4] NUT (M8X1.25-THD)  
13. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
14. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
15. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
16. 8T-4244 M [2] NUT (M12X1.75-THD)  
17. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23830639
 

122-6349: CONTROL GP-PILOT OPERATED HYD

122-6349 CONTROL GP-PILOT OPERATED HYD
S/N 8CR1-UP
PART OF 122-6364 HYDRAULIC AR, 122-6323 HYDRAULIC AR-3 VALVE
Type 1
AN ATTACHMENT
i00520722 SEBP2383
1226349 CONTROL GP-PILOT OPERATED HYD Parts scheme
  For full view, you need register

Parts for your IT28G INTEGRATED TOOLCARRIER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1H-4393 [1] LOCKWASHER  
2. 102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
3. 6R-3354 [1] BOOT-PROTECTION  
4. 4M-2381 [1] SPRING  
5. 7Y-3173 M [4] SCREW-BUTTON HEAD (M4X0.7X12-MM)  
6. 7X-1886 [1] SWITCH AS-BALL  
  141-4859 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
7. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
8. 107-6037 [1] SWITCH AS-KICKOUT (HYD LOCKOUT DETENT OVERRIDE)  
  111-7899 [1] GASKET  
9. 107-6050 [1] SUPPORT AS  
10. 112-1817 [1] VALVE-BALL (IMPLEMENT LOCKOUT)  
11. 114-3937 [1] ROD  
12. 114-3938 [1] TAB  
13. 114-3940 [1] ROD  
14. 114-3949 [1] LOCK AS  
15. 143-9069 [2] ROD  
16. 9R-1948 [2] RIVET  
17. 122-6346 Y [1] VALVE GP-PILOT (3-FUNCTION)  
18. 124-4401 [2] KNOB  
19. 124-6913 [1] ROD  
20. 127-8768 [1] CAP  
21. 128-7381 [1] COVER  
22. 114-3948 [1] LEVER AS  
23. 8T-4137 M [4] BOLT (M10X1.5X20-MM)  
24. 141-9192 [1] PLATE-INSTRUMENT  
25. 133-8597 [1] HANDLE AS  
  5I-3762 [1] KNOB  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
26. 3E-3377 [1] WEDGE-RECEPTACLE LOCK (4-PIN)  
27. 5C-7261 M [4] NUT (M8X1.25-THD)  
28. 6V-5683 M [2] BOLT (M6X1X16-MM)  
29. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
30. 8T-4244 M [3] NUT (M12X1.75-THD)  
31. 8T-8737 [2] PLUG-SEAL  
32. 9G-5687 [1] GROMMET  
33. 9X-2041 M [2] SCREW-TRUSS HEAD (M10X1.5X20-MM)  
34. 8T-4138 M [1] BOLT (M6X1X20-MM)  
35. 121-0254 [1] PLATE (6-MM THK)  
36. 121-0255 [1] SPACER (1.3-MM THK)  
37. 121-0256 [1] PLATE (4-MM THK)  
38. 140-1344 [1] SPACER (20X25X4-MM THK)  
39. 2Y-5671 B [3] WASHER (19.43X33X0.91-MM THK)  
40. 141-9188 [1] FILM-INSTRUCTION (HYDRAULIC LOCKOUT)  
41. 103-2006 [4] SCREW-PAN HEAD (6-19X0.37-IN)  
42. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Tool Operating Manual
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Crimping 1028 Thermoplastic Hose, 2760 Reduced Diameter Thermoplastic Hose, and 1543 Air Conditioning Hose{0374, 0599, 0684, 1808, 1812, 7554}
Service Magazine
New Cab Air Filters Provide Improved Efficiency and Odor Reduction {7309, 7320, 7342}
2002/07/08
Nexus Retrofit Air Conditioning and Heating Parts for Other Than Caterpillar Construction Equipment and On-Highway Trucks {7320}
2004/05/17
An Air Conditioner Kit for Use When Servicing the Air Conditioning System Is Now Available {7320, 7320}
2012/08/24
Recent Changes to the R134a Refrigerant Air Conditioning Manuals Are Now Available for All Caterpillar Products {0374, 1802, 1805, 1807, 1808, 1809, 7309, 7320, 7322, 7343}
2014/07/17

Caterpillar Parts SIS Catalog IT28G :

COMPRESSOR GP-REFRIGERANT
3E-1909 COMPRESSOR GP-REFRIGERANT
COMPRESSOR GP-REFRIGERANT
106-5122 COMPRESSOR GP-REFRIGERANT
COMPRESSOR & MTG GP-REFRIG
117-8278 COMPRESSOR & MTG GP-REFRIG
COMPRESSOR & MTG GP-REFRIG
117-8278 COMPRESSOR & MTG GP-REFRIG
205-0520 CANOPY GP-OPEN ROPS
118-1124 CANOPY AR-OPEN ROPS
CAB GP-ENCLOSED ROPS
174-9755 CAB GP-ENCLOSED ROPS
CAB GP-ENCLOSED ROPS
111-7864 CAB GP-ENCLOSED ROPS
CONSOLE GP-OPERATOR
149-4612 CONSOLE GP-OPERATOR
CONTROL GP-HANDLE
148-9562 CONTROL GP-HANDLE
CONTROL GP-HANDLE
149-4358 CONTROL GP-HANDLE
CONTROL GP-PILOT OPERATED HYD
122-6331 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
122-6331 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
122-6332 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
122-6332 CONTROL GP-PILOT OPERATED HYD
CONTROL GP-PILOT OPERATED HYD
122-6332 CONTROL GP-PILOT OPERATED HYD

Truck sale:

Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
MILTON CAT
Caterpillar IT28G, Wheel Loaders, Construction
37,500 
Caterpillar IT28G, Wheel Loaders, Construction
- Wheel Loaders
OHIO CAT
Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
ZIEGLER CAT
 
48,707 
Caterpillar IT28G, Wheel Loaders, Construction


Caterpillar IT28G
 
Caterpillar IT28G
- Wheel Loaders
EMPIRE MACHINERY
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.