AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

123-5091 CYLINDER GP-TILT S/N 2CR1-16211 76.2MM (3IN) BORE X 884.5MM (34.8IN) STROKE PART OF 143-1799, 8Y-7467 HYDRAULIC AR 428C


HYDRAULIC SYSTEM
CYLINDER GP
FUEL SYSTEM
DRAIN GP-FUEL
HYDRAULIC SYSTEM
DRIVE GP
FITTING GP
HYDRAULIC GP

BACKHOE LOADER 428C BACKHOE LOADER 2CR
 428C Backhoe Loader Side Shift, Parallel Lift 2CR00001-16211 (MACHINE) POWERED BY 3054 Engine SEBP2385 428C 2CR   (1995)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-SWING
116-6858 CYLINDER GP-SWING
CYLINDER GP-SWING
116-6861 CYLINDER GP-SWING
CYLINDER GP-TILT
123-5091 CYLINDER GP-TILT
LINES GP-COUPLER
119-4118 LINES GP-COUPLER
LINES GP-COUPLER
137-6399 LINES GP-COUPLER
LINES GP-COUPLER
138-9796 LINES GP-COUPLER
 

#SEBP23850440
 

123-5091: CYLINDER GP-TILT

123-5091 CYLINDER GP-TILT
S/N 2CR1-16211
76.2MM (3IN) BORE X 884.5MM (34.8IN) STROKE
PART OF 143-1799, 8Y-7467 HYDRAULIC AR
i00514698 SEBP2385
1235091 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 114-2225 [1] CYLINDER AS  
  9R-0153 [1] BUSHING  
2. 173-9779 M [1] BOLT (M24X3X80-MM)  
3. 6V-8237 [1] WASHER (26X44X4-MM THK)  
4. 9T-2547 [1] PISTON  
5. 6J-1972 [1] SEAL AS  
6. 6J-5733 [1] RING-WEAR  
7. 1H-7339 [1] SEAL-O-RING  
8. 6J-5731 [1] RING-BACKUP  
9. 148-2593 [1] HEAD  
10. 114-2229 [1] ROD AS  
  9R-0321 [1] BUSHING  
11. 8J-0484 [1] RING-RETAINING  
12. 8C-9133 [1] SEAL  
13. 5J-8200 [1] SEAL-U-CUP  
14. 8C-9124 [1] SEAL AS  
15. 4T-5613 [1] RING-WEAR  
  M   METRIC PART
 

#SEBP23850441
 

120-9641: DRAIN GP-ECOLOGY

120-9641 DRAIN GP-ECOLOGY
S/N 2CR1-16211
AN ATTACHMENT
i00478107 SEBP2385
1209641 DRAIN GP-ECOLOGY Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-9780 [1] SEAL-O-RING  
2. 133-6337 [1] PLUG-DRAIN  
3. 134-8474 [1] TUBE AS-DRAIN  
 

#SEBP23850442
 

112-1826: DRIVE & MTG GP-PUMP

112-1826 DRIVE & MTG GP-PUMP
S/N 2CR1-16211
PART OF 143-1799, 8Y-7467 HYDRAULIC AR
i00487466 SEBP2385
1121826 DRIVE & MTG GP-PUMP Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-9405 M [4] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
2. 9U-8886 [1] RING-SEAL  
3. 115-1918 [1] PLATE  
4. 117-3534 [1] ADAPTER  
5. 274-4555 [1] HUB  
6. 128-5596 Y [1] SHAFT GP-PUMP DRIVE  
7. 175-7904 [1] SEAL-O-RING  
8. 8T-4122 [2] WASHER-HARD (17X32X3.5-MM THK)  
9. 8T-7338 M [2] BOLT (M16X2X45-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850443
 

132-8769: FITTING GP-HYDRAULIC

132-8769 FITTING GP-HYDRAULIC -QUICK DISCONNECT
S/N 2CR1-16211
FOR USE WITH HYDRAULIC ATTACHMENTS
AN ATTACHMENT
i00498765 SEBP2385
1328769 FITTING GP-HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0406 [1] FITTING (QUICK DISCONNECT, MALE)  
2. 106-0401 [1] FITTING (QUICK DISCONNECT, FEMALE)  
 

#SEBP23850444
 

112-1844: HYDRAULIC AR

112-1844 HYDRAULIC AR
S/N 2CR1-16211
CONVERTS 2 BANK TO 3 BANK
AN ATTACHMENT
i00487524 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-5671 [1] BOOT  
  134-4407 Y [1] CONTROL GP-HYDRAULIC HAND  
  112-1849 Y [1] CONVERSION GP-CONTROL VALVE  
  119-4569 Y [1] COUPLER GP-QUICK  
  119-4118 Y [1] LINES GP-COUPLER  
  120-9650 Y [1] WIRING GP-QUICK COUPLER  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850445
 

112-1848: HYDRAULIC AR

112-1848 HYDRAULIC AR
S/N 2CR1-16211
PARALLEL LIFT, THREE BANK
AN ATTACHMENT
i00487551 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  117-5671 [1] BOOT  
  134-4407 Y [1] CONTROL GP-HYDRAULIC HAND  
  112-1849 Y [1] CONVERSION GP-CONTROL VALVE  
  112-6403 Y [1] LINES GP-LOADER AUXILIARY  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850446
 

118-6369: HYDRAULIC AR

118-6369 HYDRAULIC AR
S/N 2CR1-16211
AN ATTACHMENT
i00485904 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-1838 Y [1] CONTROL GP-HYDRAULIC PEDAL  
  119-4114 Y [1] LINES GP-BACKHOE AUXILIARY  
  112-1841 Y [1] VALVE GP-BANK 1  
   
  9S-4183 [2] PLUG (1-1/16-12-THD)  
  3D-2824 [2] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850447
 

119-3641: HYDRAULIC AR

119-3641 HYDRAULIC AR
S/N 2CR1-16211
AN ATTACHMENT
i00519953 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-1838 Y [1] CONTROL GP-HYDRAULIC PEDAL  
  119-3360 Y [1] LINES GP-BACKHOE AUXILIARY  
  112-1841 Y [1] VALVE GP-BANK 1  
   
  [2] PLUG AS  
    (EACH INCLUDES)
  3D-2824 [1] SEAL-O-RING  
  9S-4183 [1] PLUG (1-1/16-12-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850448
 

119-8176: HYDRAULIC AR

119-8176 HYDRAULIC AR
S/N 2CR1-16211
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
i00522422 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-6402 Y [1] LINES GP-LIFT CYLINDER  
  112-6401 Y [1] LINES GP-TILT CYLINDER  
  119-4595 Y [1] MOUNTING GP-BUCKET  
  114-0048 Y [1] VALVE GP-BANK 2  
  100-4972 [1] BOOT  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23850449
 

119-8177: HYDRAULIC AR

119-8177 HYDRAULIC AR
S/N 2CR1-16211
PARALLEL LIFT, 2 BANK
AN ATTACHMENT
i00699129 SEBP2385
  For full view, you need register

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  112-1851 Y [1] LINES GP-LIFT CYLINDER  
  112-1853 Y [1] LINES GP-TILT CYLINDER  
  119-4595 Y [1] MOUNTING GP-BUCKET  
  114-0048 Y [1] VALVE GP-BANK 2  
  119-7023 Y [1] WIRING GP-LIFT VALVE  
    -OR-
  149-5234 Y [1] WIRING GP-LOAD CONTROL  
  100-4972 [1] BOOT  
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Loader Bucket, Cylinder, and Linkage Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Swing Frame and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Boom, Stick, Bucket, and Cylinder Bearings - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Procedure for Reworking the Pin Bores for Swing Cylinders on the Swing Frame{5105}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-CFEL
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-CSARL
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Technical Information Bulletin
New Stabilizer Foot
New Stabilizer Foot
Tilt Cylinders May Form A Void During Some Applications
Tilt Cylinders May Form A Void During Some Applications
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
THE HEAD OF THE STICK CYLINDER MAY LOOSEN
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Backhoe)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bucket Cylinder (Extendable Stick)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Swing Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Pin Coupler Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Multipurpose Bucket Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Lift Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tilt Cylinder
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stabilizer Cylinders
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Stick Cylinder (Extendable)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Service Letter-China
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Service Letter-Asia
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
PRODUCT LINE ADDITIONS: REMANUFACTURED CYLINDERS AND RODS
Service Letter-APD
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
The Swing Cylinder Line Relief Valves Need To Be Replaced On Certain 428B, 428C, 438B And 438C Backhoe Loaders
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 1734015 STICK CYLINDER ROD AND HEAD ASSEMBLY ON CERTAIN 428C AND 438C BACKHOE LOADERS
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Bucket Tilt Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Bucket Tilt Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Loader Lift Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Multi-purpose Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Swing Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Boom Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Sideshift Assembly
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stabilizer Cylinders (428B)
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Stick, Extendible Stick, Extendible Stick Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Extendible Stick Cylinder &amp; Backhoe Bucket Cylinder
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST
Service Magazine
Smaller Diameter O-Ring Seal Used On Head For Threaded Gland Cylinder Groups {4303,5101,5102,5104,5452,7562}
1996/08/12
Torque Increased For Piston Retaining Nut In Swing Cylinder Groups{5105,7562}
1997/08/25
Improvements To The Tubes (Lift Cylinder) Provides More Clearance For The Front Tires {5057}
1998/01/26
Improvements Made To Eliminate Noise And Seal Wear On Lines Groups{5057,5102}
1998/03/09
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28
Special Instruction For Rebuilding The Backhoe Loader Pin Bores Is Now Available {6101,6104,6119,6501,6502,6503,6506,6508,6515,6518,6533,7054,7222}
1999/09/20
New Lock Valves for the Stabilizers Keep the Cylinder Head Tight {5057, 5067, 5468}
2000/06/05
A New Check Valve Reduces Voiding {5067, 5104}
2000/08/28
The Check Valve Has Been Relocated {5057, 5067, 5104}
2001/04/16
Correction to Disassembly and Assembly, SENR1209 for the Boom and Stick Cylinder {5456, 5458}
2001/05/07
Correction to Specifications Manual SENR1207-03 {5104}
2001/05/14
New Backup Rings Are Available for Sealing Hydraulic Cylinders with Pitted Grooves {4303, 5102, 5104, 5106, 5456, 7562}
2003/06/30
Correction to Testing and Adjusting, SENR1272 for the Loader Cycle Times {5457}
2001/07/02
Correction to Specifications, SENR1207 , "Stick Cylinder" {5458}
2001/10/01
Correction to Specifications, SENR1207 , "Stabilizer Cylinder" {5468}
2001/10/01
New Assembly Instructions for Rod Seals on Hydraulic Cylinders are Available {7562}
2001/09/04
Correctly Assembling the Buffer Seal Will Prevent Failure of the U-Cup Seals {7562}
2001/07/30
Correction to Service Manual, SENR1272 , "Operational Checks" {5102, 5104, 5105, 5456, 5457, 5486}
2001/11/05
Correction to Specifications , "Tilt Cylinder" {5104}
2002/04/08
New Hydraulic Tubes Are Used in the Quick Coupler Lines Gp {5057, 5133, 6129}
2003/05/12
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
New Swing Cylinders Improve Service Life {5105}
2004/11/08
Grease the Swing Frame and Maintain the Gap Between the Spacers and the Swing Frame {5105, 6506}
2005/04/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
New U-Cup Seal are Available with a Narrow Width to Service Cylinders in the Field {4303, 5101, 5102, 5104, 5456, 5457, 5458, 7562}
2010/12/24

Caterpillar Parts SIS Catalog 428C :

CYLINDER GP-SWING
116-6861 CYLINDER GP-SWING
CYLINDER GP-SWING
116-6858 CYLINDER GP-SWING
CYLINDER GP-STICK
6E-0404 CYLINDER GP-STICK
CYLINDER GP-STICK
109-7021 CYLINDER GP-STICK
CYLINDER GP-STABILIZER
126-6950 CYLINDER GP-STABILIZER
CYLINDER GP-MULTIPURPOSE BUKT
9T-4006 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-MULTIPURPOSE BUKT
185-1839 CYLINDER GP-MULTIPURPOSE BUKT
CYLINDER GP-LIFT
123-5089 CYLINDER GP-LIFT
DRAIN GP-ECOLOGY
120-9641 DRAIN GP-ECOLOGY
DRIVE & MTG GP-PUMP
112-1826 DRIVE & MTG GP-PUMP
FITTING GP-HYDRAULIC
132-8769 FITTING GP-HYDRAULIC
112-1844 HYDRAULIC AR
112-1848 HYDRAULIC AR
118-6369 HYDRAULIC AR
119-3641 HYDRAULIC AR
119-8176 HYDRAULIC AR

Truck sale:

Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
Caterpillar 428C, Construction
53,468 
Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand
 
$25,882 USD 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -
CATERPILLAR 428C 2000
 
CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -
CATERPILLAR 428C 1998
 
CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.