135-6616 VALVE GP-PUMP CONTROL S/N 2CR1-16211 PART OF 112-6564, 155-5109, 155-5110 PUMP GP-PISTON ALSO AN ATTACHMENT 428C

135-6616: VALVE GP-PUMP CONTROL

135-6616 VALVE GP-PUMP CONTROL
S/N 2CR1-16211
PART OF 112-6564, 155-5109, 155-5110 PUMP GP-PISTON
ALSO AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

Pos.	Part No	Qty	Parts name
1.	6E-6527	[2]	PLUG
2.	6E-6528	[6]	SEAL
4.	9X-7680	[3]	SEAL-O-RING
5.	5P-9262	[1]	SEAL-O-RING
6.	105-2145	[1]	VALVE-ORIFICE
8.	6E-3269	[1]	RETAINER-SPRING
9.	6E-3276	[1]	SPRING
10.	6E-3273	[1]	SEAT
11.	033-6034	[1]	SEAL-O-RING
12.	6E-6536	[1]	PLUG
13.	6E-6537 M	[2]	SCREW-ADJUSTMENT (M8X1X28-MM)
14.	6E-6538 M	[2]	NUT-ADJUSTMENT (M8X1-THD)
15.	6E-6539 M	[2]	NUT-CAP (M8X1-THD)
16.		[1]	PLUG
17.	033-6043	[1]	SEAL-O-RING
18.	6E-3272	[1]	SEAT
19.	6E-3275	[1]	SPRING (OUTER)
20.	6E-3274	[1]	SPRING (INNER)
21.	6E-3268	[1]	RETAINER-SPRING
22.	9S-8002	[1]	PLUG (7/16-20-THD)
23.	3J-7354	[1]	SEAL-O-RING
24.	096-3218 M	[1]	SETSCREW-SOCKET (M4X0.7X6-MM)
25.	8T-8442 M	[4]	BOLT-SOCKET HEAD (M6X1X30-MM)

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY
	M		METRIC PART

6E-6283: VALVE GP-RELIEF

VALVE GP-RELIEF

6E-6283 VALVE GP-RELIEF
S/N 2CR1-16211
PART OF 6E-6289 VALVE GP-CONTROL
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5K-9090	[1]	SEAL-O-RING
2.	6E-0358	[1]	RING-BACKUP
3.	4K-1388	[1]	SEAL-O-RING
4.	3K-0360	[1]	SEAL-O-RING

131-3078: VALVE GP-SHUTOFF

VALVE GP-SHUTOFF

131-3078 VALVE GP-SHUTOFF
S/N 2CR1-16211
PART OF 119-8156 LINES GP-HYDRAULIC
AN ATTACHMENT

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	127-4370	[1]	VALVE GP-SOLENOID
2.	127-4405	[1]	MANIFOLD

169-7122: VALVE GP-SHUTTLE

VALVE GP-SHUTTLE

169-7122 VALVE GP-SHUTTLE
S/N 2CR1-16211
FIELD INSTALLATION

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

111-0339: ARM GP-LIFT

ARM GP-LIFT

111-0339 ARM GP-LIFT
S/N 2CR1-16211
PART OF 112-1827 LOADER AR

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3B-8488	[8]	FITTING-GREASE (1/8-27 PTF)(HYDRAULIC)
2.	3B-8489	[14]	FITTING-GREASE (1/8-27 PTF)(EQUALIZER BAR LUBRICATION)
3.	6V-3213	[18]	RING-RETAINING
4.	6V-8144	[15]	RING-RETAINING
5.	9R-0109	[16]	WASHER (41X64X3-MM THK)
6.	9R-0158	[18]	WASHER (46X69X3-MM THK)
7.	9R-4066 B	[4]	WASHER (61X98X4-MM THK)
8.	9R-5301	[1]	PIN-COTTER
9.	9R-8390 B	[6]	SPACER (61X98X1-MM THK)
10.	111-4331	[2]	LINK AS
			(EACH INCLUDES)
	116-4825	[4]	BUSHING
11.	111-4332	[4]	PLATE
12.	111-4333	[2]	SPACER (46X63.5X37.1-MM THK)
13.	111-4334	[2]	PIN
14.	111-4335	[2]	SPACER (46X63.5X27.1-MM THK)
15.	111-4336	[1]	LINK AS
	9R-1496	[2]	BUSHING
	116-4825	[2]	BUSHING (45-MM THK)
16.	111-4337 B	[14]	WASHER (46X70X1-MM THK)
17.	111-4338	[1]	LINK AS
	9R-1496	[2]	BUSHING
	116-4825	[2]	BUSHING
18.	128-7903 B	[2]	SPACER (61X114.3X3-MM THK)
19.	111-4340	[1]	PIN
20.	111-4341	[2]	PIN
21.	111-4342	[4]	PIN
22.	111-4343	[5]	PIN
23.	277-6285	[1]	ARM & BEARING AS-LIFT
	9R-0111	[4]	BUSHING
	9R-0411	[4]	BUSHING
	9R-6690	[4]	BUSHING
		[1]	ARM AS-LIFT
	8Y-4489 M	[2]	BOSS (M10X1.5-THD)
	124-5246	[1]	PLATE AS
	126-9091	[1]	PLATE
24.	112-0950	[1]	BRACE AS
25.	114-3836	[2]	PIN
26.	118-1348	[1]	PIN
27.	119-4594 B	[8]	WASHER (41X64X1-MM THK)
28.	122-4954	[1]	PIN AS
29.	125-1037	[2]	PIN AS
30.	127-8987	[2]	RING-RETAINING
31.	130-5451	[2]	PIN
32.	6V-7687 M	[4]	LOCKNUT (M12X1.75-THD)
33.	8T-4176 M	[4]	BOLT (M12X1.75X90-MM)
34.	128-7905 B	[2]	SPACER (61X114.3X1-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

119-1215: BOOM GP

BOOM GP

119-1215 BOOM GP
S/N 2CR1-16211
PART OF 123-9236 BOOM GP

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	159-2794	[1]	BOOM AS
1A.	8Y-4489 M	[4]	BOSS (M10X1.5-THD)
1B.	9R-8523	[2]	PIN
1C.	9R-9475	[2]	BUSHING
1D.	106-0421 M	[3]	BOSS-THREADED (M12X1.75-THD)
1E.	111-0483 M	[2]	BOSS (M10X1.5-THD)
2.	3B-8488	[3]	FITTING-GREASE (1/8-27 PTF)
3.	9R-9812	[2]	PIN
4.	8T-5001 M	[2]	BOLT (M12X1.75X130-MM)
5.	6V-7687 M	[2]	LOCKNUT (M12X1.75-THD)
6.	3B-8489	[1]	FITTING-GREASE (1/8-27 PTF)
	M		METRIC PART

123-9236: BOOM GP

BOOM GP

123-9236 BOOM GP
S/N 2CR1-16211
PART OF 120-9563, 143-1748 COMMON AR

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	119-1215 Y	[1]	BOOM GP
	Y		SEPARATE ILLUSTRATION

176-8268: KIT-PIN

KIT-PIN

176-8268 KIT-PIN
S/N 2CR1-16211
BOOM TO SWING FRAME
FOR USE WITH REHS0850
FIELD INSTALLATION

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
180-6514	[1]	BOLT
	[1]	BOLT
193-7154	[1]	FILM-INSTRUCTION (READ MANUAL)
168-1801	[1]	FITTING-HYDRAULIC
		(ALSO INCLUDES SLEEVES, WASHERS & PIN)

176-8269: KIT-PIN

KIT-PIN

176-8269 KIT-PIN
S/N 2CR1-16211
BOOM TO STICK
FOR USE WITH REHS0850
FIELD INSTALLATION

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
180-6513 M	[2]	BOLT
193-7154	[1]	FILM-INSTRUCTION (READ MANUAL)
		(ALSO INCLUDES PIN, SLEEVES & WASHERS)
M		METRIC PART

176-8270: KIT-PIN

KIT-PIN

176-8270 KIT-PIN
S/N 2CR1-16211
BOOM & STICK CYLINDERS TO BOOM
FOR USE WITH REHS0850
FIELD INSTALLATION

Parts for your 428C BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
180-6513 M	[2]	BOLT
193-7154	[1]	FILM-INSTRUCTION (READ MANUAL)
		(ALSO INCLUDES PIN, SLEEVES & WASHERS)
M		METRIC PART

Information:

HYDRAULIC SYSTEM

PUMP GP

Operation and Maintenance Manual

Drive Shaft Spline - Lubricate
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Nexus Gear Pump Porting{5073}
Nexus Gear Pump Porting{5073}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Test Specifications for Vane Cartridges{0784, 5058, 5070}
Test Specifications for Vane Cartridges{0784, 5058, 5070}

Service Letter-NACD

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-Australia

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-CFEL

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-CSARL

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-Americas

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Technical Information Bulletin

Oil Leakage Occurs After Adjusting Pump Screws
Oil Leakage Occurs After Adjusting Pump Screws

Engine Stalling Due To Operating Technique
Engine Stalling Due To Operating Technique

Specifications

Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Tool Operating Manual

Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}

4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}

Service Letter-China

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Service Letter-Asia

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Systems Operation

Signal Resolver Network
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Piston Pump (Implement and Steering)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Reuse And Salvage Guidelines

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Vane Type Hydraulic Pumps {5055}
Vane Type Hydraulic Pumps {5055}

Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 9, 10, and 11) {5061, 506G, 5073}

Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}

Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}

Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}
Hydraulic Piston Pumps Used in Certain Models of Caterpillar Equipment{3203, 5070, 5084}

General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}

Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}

Service Letter-APD

The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
The Bolts Attaching The Torque Converter Flex Plate To The Torque Converter And The Bolts Attaching The Hydraulic Pump To The Transmission May Be Improperly Tightened On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders
Product Support Program For Reworking The Torque Limiter To Improve The Hydraulic Performance On Certain 416C, 426C, 428C, 436C And 438C Backhoe Loaders

Testing and Adjusting

Hydraulic Pump - Test and Adjust
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System

Bench Test Procedures

Bench Test Procedure for Hydraulic Piston Pumps{5070}
Bench Test Procedure for Hydraulic Piston Pumps{5070}

Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}

Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}

Bench Test Procedure for Vane Pumps {5055}
Bench Test Procedure for Vane Pumps {5055}

Bench Test Procedure for Hydraulic Piston Pumps {5070}
Bench Test Procedure for Hydraulic Piston Pumps {5070}

Disassembly and Assembly

Engine, Torque Converter, Transmission & Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Implement Pump
416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS MACHINE SYST

Service Magazine

Improved Hydraulic Tube Assembly Increases Service Life {5057,5056,5070}
1997/05/05

New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17

New Pumps For C-Series Backhoe Loaders{5070}
1998/05/04

Backhoe Loader Window Latch Rod Now Serviceable{7308}
1999/06/01

New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22

New Accelerator Control Alleviates Pump Cavitation {1265, 1276, 5055, 5070, 5073}
2000/04/17

Correction to Testing and Adjusting for the Test of the Torque Limiter {5070}
2001/04/23

Correction to Testing and Adjusting, SENR1272 for the High Pressure Stall Test {5070}
2001/05/14

Correction to Testing and Adjusting , "Hydraulic Pump - Test and Adjust" {5070}
2002/10/21

Cover Plate, Flange are Available for Use During Flow Tests on the Main Hydraulic Pumps {0738, 5070, 5084}
2005/04/25

Caterpillar Parts SIS Catalog 428C :

Truck sale:

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

53,468

Caterpillar 428C, Construction
- backhoe loader
METRO MACHINERY COMPANY LTD.
SUKHUMVIT RD, BANGCHAK, กรุงเทพมหานคร/Bangkok, Thailand

$25,882 USD

CATERPILLAR 428C 2000
- BACKHOE LOADERS
BERGERAT MONNOYEUR POLAND
K. Kolumba 15 - Komorniki -

CATERPILLAR 428C 2000
- BACKHOE LOADERS
CAVILL POWER PRODUCTS PTY. LTD.
315 Main North Road ENFIELD - ADELAIDE -

CATERPILLAR 428C 1998
- BACKHOE LOADERS
BERGERAT MONNOYEUR
117 RUE CHARLES MICHELS - ST DENIS -