ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPSWITCH GP
WARNING GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP23880240
112-1767: STARTING MOTOR GP-ELECTRIC
112-1767 STARTING MOTOR GP-ELECTRIC
S/N 4ZN1-16043
PART OF 7E-4629 INSTALLATION AR-ENGINE
S/N 4ZN1-16043
PART OF 7E-4629 INSTALLATION AR-ENGINE
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP23880241
112-1767: STARTING MOTOR GP-ELECTRIC
112-1767 STARTING MOTOR GP-ELECTRIC
S/N 4ZN1-16043
PART OF 143-1311, 7E-4629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
S/N 4ZN1-16043
PART OF 143-1311, 7E-4629 INSTALLATION AR-ENGINE
ALSO AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP23880242
143-0539: STARTING MOTOR GP-ELECTRIC
143-0539 STARTING MOTOR GP-ELECTRIC
S/N 4ZN1-16043
12-VOLT
PART OF 112-1767 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
S/N 4ZN1-16043
12-VOLT
PART OF 112-1767 STARTING MOTOR GP-ELECTRIC
ALSO AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8C-9778 | [1] | PLUNGER AS | |
2. | 8C-9783 | [1] | GASKET | |
3. | 2P-8104 | [1] | BEARING | |
4. | 7T-6092 | [1] | HOLDER AS-BRUSH | |
5. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
6. | 7T-6088 | [1] | BEARING AS | |
7. | 7T-6087 | [1] | WASHER (15.2X40X0.5-MM THK) | |
8. | 7T-6093 | [1] | CLUTCH AS | |
9. | 8J-4455 | [1] | BALL | |
10. | 7T-6090 | [1] | SPRING | |
11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
12. | 3E-5153 | [1] | COVER-STARTING MOTOR | |
13. | 3E-5154 | [1] | BUSHING-STARTING MOTOR | |
14. | 8F-1434 | [1] | LOCKWASHER | |
15. | 100-4113 | [1] | SWITCH AS (STARTING MOTOR)(12-VOLT) | |
16. | 100-4119 | [1] | ARMATURE AS | |
17. | 100-4118 | [1] | CASE AS-STARTING MOTOR | |
18. | 100-4115 | [1] | HOUSING-STARTING MOTOR | |
19. | 143-1344 | [1] | FRAME-STARTER | |
20. | 100-3685 | [1] | CAP | |
AVAILABLE REPAIR KIT(S): | ||||
7T-6099 | [1] | KIT-GEAR (STARTING MOTOR) | ||
(INCLUDES RETAINER, PINION & ROLLERS) | ||||
146-6729 | [1] | KIT-HARDWARE (STARTING MOTOR) | ||
(INCLUDES BOLTS, SCREWS, SCREW ASSEMBLIES & PLATE) | ||||
100-4112 | [1] | KIT-CONTACT (STARTING MOTOR) | ||
(INCLUDES NUT, WASHERS, SEAL, BUSHINGS, PLATE & BOLT) | ||||
M | METRIC PART |
#SEBP23880243
6V-0492: STARTING MOTOR GP-ELECTRIC
6V-0492 STARTING MOTOR GP-ELECTRIC
S/N 4ZN1-16043
PART OF 112-1767 STARTING MOTOR GP-ELECTRIC
S/N 4ZN1-16043
PART OF 112-1767 STARTING MOTOR GP-ELECTRIC
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8C-9778 | [1] | PLUNGER AS | |
2. | 8C-9783 | [1] | GASKET | |
3. | 6T-8953 | [1] | BEARING AS | |
4. | 7T-6092 | [1] | HOLDER AS-BRUSH | |
5. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
6. | 7T-6088 | [1] | BEARING AS | |
7. | 7T-6087 | [1] | WASHER (15.2X40X0.5-MM THK) | |
8. | 7T-6093 | [1] | CLUTCH AS | |
9. | 8J-4455 | [1] | BALL | |
10. | 7T-6090 | [1] | SPRING | |
11. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
12. | 3E-5153 | [1] | COVER-STARTING MOTOR | |
13. | 9X-2036 M | [1] | SCREW-PAN HEAD | |
14. | 8F-1434 | [1] | LOCKWASHER | |
15. | 100-4113 | [1] | SWITCH AS | |
16. | 100-4119 | [1] | ARMATURE AS | |
17. | 100-4118 | [1] | CASE AS-STARTING MOTOR | |
18. | 100-4115 | [1] | HOUSING-STARTING MOTOR | |
19. | 100-4117 | [1] | FRAME-STARTER | |
20. | 100-3685 | [1] | CAP | |
21. | 3E-5154 | [1] | BUSHING-STARTING MOTOR | |
AVAILABLE REPAIR KIT(S): | ||||
7T-6099 | [1] | KIT-GEAR | ||
7T-6100 | [1] | KIT-HARDWARE | ||
8C-5457 | [1] | KIT-CONTACT | ||
100-4112 | [1] | KIT-CONTACT | ||
M | METRIC PART |
#SEBP23880244
130-4653: SWITCH GP-PRESSURE
130-4653 SWITCH GP-PRESSURE -ENGINE OIL
S/N 5HK35900-99999
PART OF 153-5363, 153-5364 ENGINE AR, 106-5001, 106-5002, 122-8803, 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
S/N 5HK35900-99999
PART OF 153-5363, 153-5364 ENGINE AR, 106-5001, 106-5002, 122-8803, 122-8804 ENGINE AR-PRIMARY
AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP23880245
9R-9481: WARNING GP-BACKUP
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SIS#SEBP23880246
104-9499: WIRING GP-AIR CONDITIONER
104-9499 WIRING GP-AIR CONDITIONER
S/N 4ZN1-16043
PART OF 104-9479, 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT
S/N 4ZN1-16043
PART OF 104-9479, 144-2221, 145-7168 AIR CONDITIONER AR
AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 104-9511 | [1] | HARNESS AS-HEATER & AIR COND (A/C CAB) | |
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES WEDGE & PLUG) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES WEDGE & RECEPTACLE) | ||||
2. | 142-3026 | [1] | HARNESS AS-HEATER & AIR COND (AIR CONDITIONER COMPRESSOR) | |
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(INCLUDES WEDGE & PLUG) | ||||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES WEDGE & RECEPTACLE) | ||||
3. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(HIGH-LOW) | |
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES WEDGE & RECEPTACLE) | ||||
4. | 9X-7378 | [1] | SEAL-O-RING | |
5. | 9U-2277 | [1] | CLIP AS | |
8C-3334 | [1] | RIVET-TUBULAR | ||
6. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
7. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
8. | 8T-4133 M | [3] | NUT (M10X1.5-THD) | |
9. | 113-8493 | [1] | FUSE (25-AMPERE) | |
10. | 113-8492 | [1] | FUSE (20-AMPERE) | |
11. | 113-8490 | [1] | FUSE (10-AMPERE) | |
12. | 3S-2093 | [11] | STRAP-CABLE | |
13. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(INCLUDES WEDGE & RECEPTACLE) | ||||
3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
14. | 4P-7581 | [1] | CLIP (LADDER) | |
15. | 3E-9362 | [1] | RELAY AS (12-VOLT) | |
16. | 6K-0806 | [3] | STRAP-CABLE | |
M | METRIC PART |
#SEBP23880247
105-5158: WIRING GP-CAB
105-5158 WIRING GP-CAB
S/N 4ZN1-16043
PART OF 104-3451 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
S/N 4ZN1-16043
PART OF 104-3451 CAB AR-ENCLOSED ROPS
AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 163-4120 | [1] | HARNESS AS-CAB | |
155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
(EACH PLUG KIT INCLUDES RECEPTACLE AS, WEDGE, & INTERFACE SEAL) | ||||
102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
3E-3383 | [1] | WEDGE-RECEPTACLE LOCK (6-PIN) | ||
3E-9179 | [2] | TERMINAL-RECEPTACLE (14-GA TO 18-GA) | ||
3S-2093 | [11] | STRAP-CABLE | ||
8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
8T-8737 | [2] | PLUG-SEAL | ||
6K-0806 | [8] | STRAP-CABLE | ||
111-7898 | [6] | CONNECTOR (8-PIN) | ||
112-9611 | [21] | TERMINAL-BLADE (18-GA TO 20-GA) | ||
116-4160 | [2] | TERMINAL-BLADE (12-GA TO 14-GA) | ||
116-4161 | [13] | TERMINAL-BLADE (16-GA TO 18-GA) | ||
124-9636 | [1] | BLOCK-MINIFUSE | ||
124-9637 | [1] | LOCK-MINIFUSE | ||
127-5460 | [2] | TERMINAL-BUS | ||
2L-8079 | [1] | TERMINAL-RING (14-GA TO 16-GA, 3/8-IN SCREW) | ||
5P-5618 | [1] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
5P-4571 | [4] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
5P-5694 | [1] | TERMINAL-BLADE (14-GA TO 16-GA) | ||
131-3798 | [1] | BASE | ||
2. | 3S-2093 | [3] | STRAP-CABLE | |
3. | 105-5157 | [1] | PLATE | |
4. | 9X-1046 M | [3] | SCREW (M4X0.7X18-MM) | |
5. | 118-0366 | [1] | SWITCH AS-ROCKER (REAR WIPER) | |
111-7899 | [1] | GASKET | ||
6. | 109-2344 | [1] | SWITCH AS-ROCKER (FRONT WIPER) | |
111-7899 | [1] | GASKET | ||
7. | 113-8490 | [2] | FUSE (10-AMPERE) | |
8. | 104-3905 | [1] | COVER-FUSE | |
9. | 8T-4133 M | [2] | NUT (M10X1.5-THD) | |
10. | 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | |
(INCLUDES RECEPTACLE AS & WEDGE) | ||||
12. | 109-2346 | [2] | SWITCH AS-ROCKER (ROADING LIGHTS) | |
111-7899 | [1] | GASKET | ||
13. | 109-2356 | [2] | PLUG | |
14. | 7K-1181 | [1] | STRAP-CABLE | |
15. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
16. | 6K-0806 | [1] | STRAP-CABLE | |
M | METRIC PART |
#SEBP23880248
145-5936: WIRING GP-ENGINE
145-5936 WIRING GP-ENGINE
S/N 4ZN1-16043
PART OF 120-8229, 147-6211, 153-6354 ENGINE AR
AN ATTACHMENT
S/N 4ZN1-16043
PART OF 120-8229, 147-6211, 153-6354 ENGINE AR
AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
2. | 9R-9903 | [1] | HARNESS AS-ENGINE | |
3. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
4. | 131-0232 | [1] | COVER | |
5. | 3S-2093 B | [12] | STRAP-CABLE | |
6. | 123-4950 M | [3] | SCREW-PAN HEAD (M6X1X16-MM) | |
7. | 4P-8134 | [4] | CLIP (LADDER) | |
8. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
9. | 8T-8799 | [1] | BOOT (RED) | |
10. | 4P-7581 | [2] | CLIP (LADDER) | |
11. | 7K-1181 | [4] | STRAP-CABLE | |
12. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
13. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
B | USE AS REQUIRED | |||
M | METRIC PART |
#SEBP23880249
145-5937: WIRING GP-ENGINE
145-5937 WIRING GP-ENGINE
S/N 4ZN5635-16043
PART OF 147-6213, 147-6214 ENGINE AR
AN ATTACHMENT
S/N 4ZN5635-16043
PART OF 147-6213, 147-6214 ENGINE AR
AN ATTACHMENT
Parts for your 416C BACKHOE LOADER:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 142-4909 | [1] | HARNESS AS | |
2. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
3. | 131-0232 | [1] | COVER | |
4. | 3S-2093 B | [12] | STRAP-CABLE | |
5. | 123-4950 M | [3] | SCREW-PAN HEAD (M6X1X16-MM) | |
6. | 4P-8134 | [3] | CLIP (LADDER) | |
7. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
8. | 8T-8799 | [1] | BOOT (RED) | |
9. | 4P-7581 | [3] | CLIP (LADDER) | |
10. | 7K-1181 | [4] | STRAP-CABLE | |
11. | 8T-4200 M | [1] | BOLT (M8X1.25X16-MM) | |
12. | 8T-4137 M | [3] | BOLT (M10X1.5X20-MM) | |
13. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
B | USE AS REQUIRED | |||
M | METRIC PART |
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Service Letter-NACD
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Start Switch May Cause Unintended Starter Engagement
Start Switch May Cause Unintended Starter Engagement
Start Switch May Cause Unintended Starter Engagement
Specifications
Electric Starting Motor
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Service Letter-China
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Asia
Systems Operation
General Information
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Component Description
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Normal Operation
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Reuse And Salvage Guidelines
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Disassembly, Assembly, Testing, and Salvage of Starting Motor for 3046, 3064, and 3066 Engines {1453}
Service Letter-APD
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
The Electrical Grounding Needs To Be Improved To Prevent Unintentional Starter Engagement On Certain 416C, 426C And 436C Backhoe Loaders
Testing and Adjusting
Initial Troubleshooting Procedure
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
No Load - Test
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Starting Motor - Troubleshoot
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Component - Test
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Disassembly and Assembly
General Information
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Starting Motor - Assemble
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Starting Motor - Disassemble
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
RA1.2, R1.4, R2.0, R2.2, R2.5, R2.7, R3.0, R4.5 and R5.5 Series Reduction Starting Motors
Service Magazine