147-0204 TRANSMISSION GP-POWER SHIFT S/N 4ZN5635-16043 PART OF 142-4437 TRANSMISSION AR-POWER SHIFT AN ATTACHMENT 416C

POWER TRAIN

TRANSMISSION GP

0. 147-0204 TRANSMISSI

VALVE GP-RELIEF

1. 147-0209 VALVE GP-R

ELECTRICAL AND STARTING SYSTEM

VALVE GP

2. 121-4036 VALVE GP-S
3. 142-1468 VALVE GP-S
4. 148-8986 VALVE GP-S
5. 148-8988 VALVE GP-S

BRAKING SYSTEM

BRAKE GP

6. 129-0138 BRAKE GP-P

CONTROL GP

7. 163-0754 CONTROL GP
8. 8Y-7479 CONTROL GP
9. 104-5727 CONTROL GP
0. INFORMATION

BACKHOE LOADER 416C BACKHOE LOADER 4ZN
416C Backhoe Loader Center Pivot, Single Tilt 4ZN00001-16043 (MACHINE) POWERED BY 3054 Engine SEBP2388 416C 4ZN (1996)

POWER TRAIN

TRANSMISSION GP

111-7815 TRANSMISSION GP-DIRECT DRIVE

147-0200 TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT

#SEBP23880300

147-0204: TRANSMISSION GP-POWER SHIFT

TRANSMISSION GP-POWER SHIFT

147-0204 TRANSMISSION GP-POWER SHIFT
S/N 4ZN5635-16043
PART OF 142-4437 TRANSMISSION AR-POWER SHIFT
AN ATTACHMENT

i00735906 SEBP2388

1470204 TRANSMISSION GP-POWER SHIFT Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
7.	147-0218	[1]	TUBE AS
8.	148-8988 Y	[2]	VALVE GP-SOLENOID (FORWARD HIGH)
9.	8C-8545 M	[2]	BOLT-SOCKET HEAD (M5X0.8X20-MM)
10.	120-9762	[5]	SEAL-O-RING
11.	148-8986 Y	[1]	VALVE GP-SOLENOID (REVERSE)
12.	147-0253	[1]	CASE AS-REAR
	9W-0717	[11]	PLUG
13.	121-7398	[1]	SPACER (70X79.5X2-MM THK)
14.	121-7402 B	[1]	SHIM (0.6-MM THK)
15.	121-7401 B	[1]	SHIM (0.18-MM THK)
16.	121-7400 B	[1]	SHIM (0.08-MM THK)
17.	121-7399 B	[1]	SHIM (0.05-MM THK)
18.	7T-2646	[2]	SPACER (66X79.5X2.02-MM THK)
19.	6T-9166 B	[2]	SHIM (0.051-MM THK)
20.	6T-9165 B	[2]	SHIM (0.076-MM THK)
21.	6T-9164 B	[2]	SHIM (0.178-MM THK)
22.	122-1878	[1]	RING-SEAL
23.	147-0201	[1]	TUBE AS
24.	7W-3556	[12]	WASHER (14.27X20.57X1.5-MM THK)
25.	147-0234	[6]	BOLT (9/16-18X0.83-IN)
26.	1U-8846 B	[1]	SEALANT-GASKET
27.	5P-8066	[2]	SEAL-O-RING
28.	6V-8097 M	[3]	BOLT (M12X1.75X30-MM)
29.	7T-3195	[3]	WASHER (12.3X47X6.35-MM THK)
30.	122-6787	[2]	YOKE AS
			(EACH AS INCLUDES)
		[1]	GUARD
31.	8T-2193	[2]	SEAL-LIP TYPE
32.	121-7385	[1]	PUMP GP-TRANSMISSION
	124-6612	[1]	SEAL-LIP TYPE
33.	9P-9150	[4]	WASHER (8.25X18X0.84-MM THK)
34.	173-0332	[1]	SHAFT AS (COUNTERSHAFT)
	163-9091	[1]	PLUG
35.	7X-4741	[1]	SEAL
36.	9S-4185	[3]	PLUG (3/4-16-THD)
37.	3K-0360	[3]	SEAL-O-RING
38.	123-8906	[5]	CUP-TAPERED ROLLER
39.	123-8905	[5]	CONE-BEARING
40.	121-0694	[2]	WASHER-THRUST (40X70X4-MM THK)
41.	172-5317	[6]	BEARING-SPECIAL
42.	123-8913	[2]	BEARING-ROLLER
43.	147-0224	[1]	GEAR (45/32-TEETH)
44.	8E-5707	[7]	PLATE-END
45.	6V-8757	[6]	RING-RETAINING
46.	6T-9194	[45]	PLATE
47.	6Y-7929	[37]	DISC-FRICTION
48.	9U-8875	[6]	RING-RETAINING
49.	121-2500	[4]	WASHER-THRUST (50X70X4-MM THK)
50.	147-0202	[2]	GEAR (45/24-TEETH)
51.	147-0257	[1]	SHAFT AS-INPUT
	123-2920	[3]	PLUG
52.	9U-8886	[4]	RING-SEAL
53.	123-8910	[1]	CUP-TAPERED ROLLER
54.	123-8909	[1]	CONE-BEARING
55.	7T-6655	[4]	BEARING
56.	147-0259	[2]	SPACER (51.1X54.9X18.7-MM THK)
57.	147-0238	[5]	SPRING AS
58.	6V-5100	[5]	SEAL-O-RING
59.	147-0228	[4]	PISTON-CLUTCH
60.	6T-9196	[7]	SEAL
61.	122-1886	[1]	RING-SEAL
62.	123-8907	[3]	CONE-BEARING
63.	123-8908	[3]	CUP-TAPERED ROLLER
64.	147-0212	[1]	GEAR (42-TEETH)
65.	147-0216	[1]	GEAR (38-TEETH)
66.	147-0203	[3]	WASHER-THRUST (45.3X65X5-MM THK)
67.	147-0258	[1]	SPACER (46X50X16-MM THK)
68.	147-0215	[1]	GEAR (45/19-TEETH)
69.	172-6050	[6]	BEARING-SPECIAL
70.	122-1877	[3]	WASHER-THRUST (40X65X4-MM THK)
71.	6Y-1192	[7]	RING-SEAL
72.	123-8912	[6]	BEARING-ROLLER
73.	9S-4191	[14]	PLUG (9/16-18-THD)
74.	147-0264	[1]	GEAR (45/28-TEETH)
75.	147-0260	[1]	RETAINER-SPRING (16.36MM ID)
76.	095-0928	[1]	RING-RETAINING
77.	147-0205	[2]	WASHER (55X78X5-MM THK)
78.	147-0248	[1]	SPACER (56.2X60X15.8-MM THK)
79.	157-2090	[1]	GEAR (38-TEETH)
80.	172-6743	[2]	BEARING-SPECIAL
81.	147-0242	[1]	GEAR (48-TEETH)
82.	150-3757	[2]	BEARING
83.	009-2062	[2]	SEAL-O-RING
84.	157-2088	[2]	PISTON AS
85.	147-0261	[1]	SHAFT AS-OUTPUT (REAR)
	9W-0717	[2]	PLUG
86.	095-0927	[1]	RING-RETAINING
87.	122-1884	[1]	SPACER (45X49X8-MM THK)
88.	147-0210	[1]	GEAR (45/36-TEETH)
89.	147-0207	[1]	SHAFT AS-OUTPUT (FRONT)
90.	122-1879	[2]	SPACER (58X67.5X2-MM THK)
91.	104-3288 B	[2]	SHIM (0.05-MM THK)
92.	121-2059 B	[2]	SHIM (0.08-MM THK)
93.	121-2060 B	[2]	SHIM (0.18-MM THK)
94.	121-2061 B	[2]	SHIM (0.6-MM THK)
95.	147-0211	[1]	ELBOW AS
	3G-6927	[1]	ADAPTER
96.	6Y-7957	[8]	DISC-FRICTION
97.	147-0227	[1]	PISTON-CLUTCH
98.	6V-8335 M	[16]	BOLT-SELF-LOCKING (M10X1.5X40-MM)
99.	147-0262	[4]	WASHER (19.1X24.1X1.5-MM THK)
100.	147-0266	[2]	BOLT (3/4-16X1.417-IN)
101.	6V-2455	[1]	SENSOR GP-SPEED
	102-8802 J	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3365 J	[1]	WEDGE-RECEPTACLE LOCK (2-PIN)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1386 BE		SLEEVE
102.	1V-6341	[1]	SEAL
103.	3J-1907	[14]	SEAL-O-RING
104.	8T-0643 M	[1]	BOLT (M10X1.5X80-MM)
105.	6Y-1896	[1]	PLUG AS-DRAIN
	5P-6718	[1]	SEAL-O-RING
106.	147-0232	[4]	PLUG
107.	9X-6615 M	[12]	BOLT (M5X0.8X30-MM)
108.	7T-3253	[2]	DOWEL
109.	7T-3251	[1]	BREATHER
110.	7X-4744	[1]	SEAL-O-RING
111.	147-0255	[1]	HOUSING-SPRING
112.	147-0206	[1]	SPRING
113.	2H-3698	[1]	BALL
114.	147-0256	[1]	SHAFT AS-REVERSE
	9W-0717	[1]	PLUG
	147-0270	[1]	ORIFICE
115.	147-0226	[1]	TUBE AS
116.	147-0236	[1]	TUBE AS
117.	6V-8210 M	[2]	BOLT (M8X1.25X16-MM)
118.	106-9861	[1]	PLATE AS-COVER
119.	121-4036 Y	[2]	VALVE GP-SOLENOID (TORQUE CONVERTER INLET)
120.	6T-9202	[2]	PLUG
121.	121-7396	[1]	VALVE GP-RELIEF (CLUTCH 2 SOLENOID)
	6V-4589	[1]	SEAL-O-RING
	8L-2746	[1]	SEAL-O-RING
122.	147-0209 Y	[1]	VALVE GP-RELIEF (CLUTCH PRESSURE)
123.	9W-5460	[1]	RING
124.	7T-2651	[1]	STRAINER-SUCTION
125.	4F-7952	[1]	SEAL-O-RING
126.	8T-1580	[1]	CUP-BEARING
127.	8T-0271 M	[2]	BOLT-SOCKET HEAD (M10X1.5X35-MM)
128.	150-7732	[2]	SEAL-O-RING
129.	8T-1581	[1]	BEARING-TAPERED ROLLER
130.	6T-9163 B	[2]	SHIM (0.599-MM THK)
131.	119-4740	[1]	FILTER-OIL (STANDARD EFFICIENCY)
132.	147-0245	[1]	CASE AS-FRONT
	9W-0717	[4]	PLUG
	147-0268	[4]	PLUG
133.	161-3249	[1]	RING-RETAINING
134.	8C-5748 M	[4]	BOLT (M8X1.25X55-MM)
135.	178-9566	[2]	SPRING-PISTON
136.	122-1883	[1]	SPACER (38X45X5-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J INCLUDES PART(S) MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP23880301

147-0209: VALVE GP-RELIEF

VALVE GP-RELIEF

147-0209 VALVE GP-RELIEF
S/N 4ZN5635-16043
PART OF 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700237 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-4744	[1]	SEAL-O-RING
2.	6V-9178	[1]	SEAL-O-RING
3.	106-9586	[1]	SEAL-O-RING

#SEBP23880302

121-4036: VALVE GP-SOLENOID

VALVE GP-SOLENOID

121-4036 VALVE GP-SOLENOID
S/N 4ZN1-16043
12-VOLT,TORQUE CONVERTER INLET
PART OF 111-7814 TRANSMISSION GP-DIRECT DRIVE, 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00200939 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3J-9196	[1]	NUT-JAM (1/2-20-THD)
2.	122-1672	[1]	CARTRIDGE AS
3.	130-0013	[1]	COIL AS
4.	1S-9593	[2]	STRAP-CABLE
5.	3E-3362	[1]	WEDGE-PLUG LOCK (2-PIN)
6.	186-3736	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
7.	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS & WEDGE)

			AVAILABLE REPAIR KIT(S):
	122-1135	[1]	KIT-SEAL
			(INCLUDES RINGS & SEALS)

#SEBP23880303

142-1468: VALVE GP-SOLENOID

VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID
S/N 4ZN1-16043
12 VOLT DIRECT CURRENT
PART OF 111-7814, 111-7815 TRANSMISSION GP-DIRECT DRIVE
AN ATTACHMENT

i00629557 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	143-4988	[2]	LOCKNUT
6.	143-6227	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP23880304

148-8986: VALVE GP-SOLENOID

VALVE GP-SOLENOID

148-8986 VALVE GP-SOLENOID
S/N 4ZN5635-16043
PART OF 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700246 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	061-8639	[2]	SEAL-O-RING
3.	8L-2779	[4]	SEAL-O-RING
4.	202-0040	[1]	LOCKNUT (11/16-27-THD)
5.	150-4932	[1]	PLUG-ORIFICE
6.	143-4655	[1]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP23880305

148-8988: VALVE GP-SOLENOID

VALVE GP-SOLENOID

148-8988 VALVE GP-SOLENOID
S/N 4ZN5635-16043
PART OF 147-0200, 147-0204 TRANSMISSION GP-POWER SHIFT
AN ATTACHMENT

i00700250 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	117-2911	[1]	COIL AS (12-VOLT)(FORWARD)
	1S-9593	[2]	STRAP-CABLE
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
2.	130-0912	[1]	COIL AS (12-VOLT)(REVERSE)
	1S-9593	[2]	STRAP-CABLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737	[1]	PLUG-SEAL
3.	061-8639	[2]	SEAL-O-RING
4.	8L-2779	[4]	SEAL-O-RING
5.	202-0040	[1]	LOCKNUT (11/16-27-THD)
6.	150-4932	[1]	PLUG-ORIFICE
7.	143-4655	[2]	WASHER (18.3X24.8X0.8-MM THK)

#SEBP23880306

129-0138: BRAKE GP-PARKING

BRAKE GP-PARKING

129-0138 BRAKE GP-PARKING
S/N 4ZN1-16043
PART OF 8Y-7479 CONTROL GP-PARKING BRAKE

i01380370 SEBP2388

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	230-3809	[1]	BRAKE AS
	230-3810	[1]	KIT-BRAKE LINING
			(INCLUDES LINING & SPRING)
	230-3811	[1]	KIT-BRAKE CALIPER
			(INCLUDES SLEEVE/BOLTS, SLEEVE PROTECTORS, WASHERS, NUTS, BOLT, LINNING AS, BOOT, SEALS, & SPRING)
	166-9413	[1]	KIT-CAM (COUNTERCLOCKWISE)
			(INCLUDES CAM, BEARING, & RETAINER)
2.	124-9464	[1]	BRACKET
3.	130-7282	[1]	BRACKET

#SEBP23880307

163-0754: CONTROL GP-PARKING BRAKE

CONTROL GP-PARKING BRAKE

163-0754 CONTROL GP-PARKING BRAKE
S/N 4ZN1-16043
PART OF 8Y-7479 CONTROL GP-PARKING BRAKE

i01380364 SEBP2388

1630754 CONTROL GP-PARKING BRAKE Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	163-0753 Y	[1]	LEVER GP-HAND CONTROL
2.	163-0755	[1]	CABLE GP
	6V-8759	[1]	RING-RETAINING
	Y		SEPARATE ILLUSTRATION

#SEBP23880308

8Y-7479: CONTROL GP-PARKING BRAKE

CONTROL GP-PARKING BRAKE

8Y-7479 CONTROL GP-PARKING BRAKE
S/N 4ZN1-16043
PART OF 143-2915, 8Y-7476 POWER TRAIN AR

i00200756 SEBP2388

8Y7479 CONTROL GP-PARKING BRAKE Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9R-2806	[1]	PIN
3.	9R-2807	[1]	CLIP (RETAINER)
4.	122-0273	[1]	SWITCH AS (BRAKE)
5.	163-0754 Y	[1]	CONTROL GP-PARKING BRAKE
6.	129-0138 Y	[1]	BRAKE GP-PARKING
7.	4B-4863	[2]	WASHER (4.7X11X1.2-MM THK)
8.	9S-1350	[1]	CLIP
9.	6V-9189 M	[2]	LOCKNUT (M8X1.25-THD)
10.	7M-3361	[1]	GROMMET
11.	8S-4734	[3]	BOLT (9/16-12X2-IN)
12.	8T-0276 M	[2]	BOLT (M8X1.25X45-MM)
13.	8T-3998 M	[2]	BOLT (M4X0.7X12-MM)
14.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
15.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
16.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
17.	7M-0242	[3]	WASHER-HARD (15.1X25.4X5-MM THK)
18.	3S-2093	[1]	STRAP-CABLE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP23880309

104-5727: CONTROL GP-SERVICE BRAKE

CONTROL GP-SERVICE BRAKE

104-5727 CONTROL GP-SERVICE BRAKE
S/N 4ZN1-16043
PART OF 143-2915, 8Y-7476 POWER TRAIN AR

i00200797 SEBP2388

1045727 CONTROL GP-SERVICE BRAKE Parts scheme

For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1H-1200	[1]	PIN-SPRING
2.	1P-4278	[4]	CLAMP-HOSE
3.	4E-8619 Y	[1]	RESERVOIR GP-BRAKE
4.	5G-8108	[1]	CLAMP
5.	150-3024	[2]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	5P-4924	[1]	ELBOW
6.	8T-4815	[2]	ROD END
7.	8Y-7196	[1]	TUBE AS-BRAKE
8.	8Y-7197	[1]	BRACKET AS
	6V-9632 M	[3]	NUT-WELD (M6X1-THD)
9.	8Y-7198	[1]	TUBE AS
10.	9R-2806	[2]	PIN
11.	9R-2807	[2]	CLIP (RETAINER)
12.	9R-8184	[1]	PIN AS
13.	9R-8185	[2]	SPACER (22.5X37X51-MM THK)
14.	9R-8186	[2]	SPRING
15.	9R-8189	[2]	PUSHROD
16.	9R-9334	[1]	BRACKET AS
	5G-8108	[1]	CLAMP
17.	155-8154 I	[2]	HOSE AS
18.	104-5497	[1]	PLATE
19.	5P-1442 E		HOSE (95-CM)
20.	9X-2043 M	[5]	SCREW-TRUSS HEAD (M6X1X14-MM)
21.	123-3426	[1]	CYLINDER AS-BRAKE MASTER
	113-5049	[1]	TUBE AS
22.	124-2821 I	[2]	HOSE AS
23.	124-3544 J	[1]	PLATE
24.	131-3137	[1]	PLATE
25.	1A-5350	[6]	CLIP
26.	4J-5477	[4]	SEAL-O-RING
27.	5C-7261 M	[6]	NUT (M8X1.25-THD)
28.	148-8325	[2]	CONNECTOR AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8641	[1]	CONNECTOR
29.	8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
30.	8T-4133 M	[4]	NUT (M10X1.5-THD)
31.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
32.	8T-4138 M	[4]	BOLT (M6X1X20-MM)
33.	8T-4189 M	[2]	BOLT (M8X1.25X20-MM)
34.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
35.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
36.	8T-4224	[9]	WASHER-HARD (8.8X16X2-MM THK)
37.	154-5401	[1]	PEDAL AS
37A.	091-4471	[1]	BUSHING
38.	154-5400	[1]	PEDAL AS
38A.	091-4471	[1]	BUSHING
39.	9R-2751	[1]	WASHER (22.5X40X3-IN THK)
40.	148-8368	[2]	ELBOW AS (45 DEGREE)
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW

			AVAILABLE REPAIR KIT(S):
	113-5048	[1]	KIT-BRAKE CYLINDER
			(INCLUDES COVER, VALVE, INSERT, CIRCLIP, SEALS, WASHER, & GREASE)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		KITS MARKED J AVAILABLE FOR PARTS MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

POWER TRAIN

TRANSMISSION GP

Operation and Maintenance Manual

Fifth Gear Lockout Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Magnetic Screen - Clean
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil - Change
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Transmission Oil Level - Check
416C, 426C, 428C, 436C and 438C Backhoe Loaders

Special Instruction

Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}
Valve Installation for Scheduled Oil Sampling of Engine, Transmission, Hydraulics, and Steering{1000, 7000, 7542, 7542}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE ALL WHEEL DRIVE CLUTCH ASSEMBLY ON CERTAIN 416C, 426C, 428C, 436C AND 438C BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE RUBBER COATED PLUG IN THE POWERSHIFT TRANSMISSION PUMP SUCTION PASSAGE THAT MAY DISLODGE ON CERTAIN 416C, 420D, 426C, 428C, 430D, 436C, 438C AND 446B BACKHOE LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING A FAILED POWERSHIFT TRANSMISSION COUNTERSHAFT ON CERTAIN 416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch
Transmission May Remain In Neutral Following Operation Of The Neutralizer Push Button Switch

Bearing Part Number Listed Incorrectly For Transmissions
Bearing Part Number Listed Incorrectly For Transmissions

Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures
Direct Drive Transmission Front Output (All Wheel Dirve) Shaft Failures

Transmission Controls (Shift Lever) May Fail
Transmission Controls (Shift Lever) May Fail

Specifications

Torque Converter<BR> 111-7808
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Transmission
416C, 426C, 428C, 436C & 438C BACKHOE LOADERS TRANSMISSION

Introduction
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Transmission
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Tool Operating Manual

M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}

Service Letter-China

Service Letter-Asia

Systems Operation

Systems Operation
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Reuse And Salvage Guidelines

Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}

Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}

Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}

Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}

Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}

Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}

Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}

Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}

Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}

Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}

Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}

Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}

Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}

Contamination Control Guidelines

Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}

Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}

Service Letter-APD

Testing and Adjusting

Testing And Adjusting
416C, 426C, 428C, 436C, AND 438C BACKHOE LOADERS POWERSHIFT

Bench Test Procedures

Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}

Disassembly and Assembly

Engine, Torque Converter, Transmission & Implement Pump
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Engine & Transmission
3054 ENGINE SUPPLEMENT FOR 416C, 426C, 428C, 436C & 438C BAC

Solenoid Valve (Transmission)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Direct Drive) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Transmission (Powershift) (If Equipped)
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine, Torque Converter & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Engine & Transmission
416C, 426C, 428C, 436C, & 438C BACKHOE LOADERS POWER TRAIN

Service Magazine

C-Series Backhoe Loaders Are Being Updated {1000,0685,0720,1001,1013,1350,3030,7950}
1998/01/26

Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08

Use 152-7055 Spring Compressor For Disassembly And Assembly Of Transmission Clutch Shaft Assemblies {3150}
1998/10/05

Revised Special Instruction, REHS0126-02, "Caterpillar Electronic Controls Service Code Information Description List", Available{0374,1901,1927,1930,1948,3168,4348,4802,4808,4810,4812,5511,5701,7490,7494,7601,7602,7610}
1998/11/16

Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28

Seals for the Relief Valves on the Transmission {5117}
2001/06/04

New Lip Seals Are Used in the Transmission {3030, 3066}
2003/09/08

A New Shaft Assembly Is Now Used {3030}
2003/10/20

A New Torque Converter Is Now Used {3101}
2004/06/28

An Improved Gear Is Now Used in Transmissions {3030}
2004/07/05

Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20

Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17

Caterpillar Parts SIS Catalog 416C :

147-0200 TRANSMISSION GP-POWER SHIFT

111-7815 TRANSMISSION GP-DIRECT DRIVE

111-7814 TRANSMISSION GP-DIRECT DRIVE

142-4437 TRANSMISSION AR-POWER SHIFT

142-4436 TRANSMISSION AR-POWER SHIFT

140-6159 TRANSMISSION AR-POWER SHIFT

107-3762 TRANSMISSION AR-DIRECT DRIVE

107-3761 TRANSMISSION AR-DIRECT DRIVE

147-0209 VALVE GP-RELIEF

121-4036 VALVE GP-SOLENOID

142-1468 VALVE GP-SOLENOID

148-8986 VALVE GP-SOLENOID

148-8988 VALVE GP-SOLENOID

129-0138 BRAKE GP-PARKING

163-0754 CONTROL GP-PARKING BRAKE

8Y-7479 CONTROL GP-PARKING BRAKE

Truck sale:

Caterpillar 416C
- backhoe loader
FOLEY, INC.

4,063

Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA

37,100

Caterpillar 416C, backhoe loader, Construction

26,000

Caterpillar 416C, backhoe loader, Construction

34,000

Caterpillar 416C, backhoe loader, Construction