AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9R-9939 CONTROL GP-HYDRAULIC HAND S/N 4ZN1-16043 PART OF 143-1758, 8Y-8001 CHASSIS AR Type 2 416C BACKHOE LOADER


OPERATOR STATION
CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC
CONTROL GP-STEERING
CONTROL GP-TRANSMISSION

BACKHOE LOADER 416C BACKHOE LOADER 4ZN
 416C Backhoe Loader Center Pivot, Single Tilt 4ZN00001-16043 (MACHINE) POWERED BY 3054 Engine SEBP2388 416C 4ZN   (1996)

OPERATOR STATION

CONTROL GP-HYDRAULIC
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
113-0720 CONTROL GP-HYDRAULIC PEDAL
KIT-HYDRAULIC HAND CONTROL
151-2595 KIT-HYDRAULIC HAND CONTROL
 

#SEBP23880660
 

9R-9939: CONTROL GP-HYDRAULIC HAND

9R-9939 CONTROL GP-HYDRAULIC HAND
S/N 4ZN1-16043
PART OF 143-1758, 8Y-8001 CHASSIS AR
Type 2
i00729774 SEBP2388
9R9939 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 BC [6] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 5H-3193 [1] PIN-SPRING  
4. 8T-4766 [1] ROD END  
5. 8T-4773 [1] BALL JOINT  
6. 8T-4815 [2] ROD END  
7. 8T-9501 [2] SCREW (10-16X0.75-IN)  
8. 9R-1765 [1] COVER-TOP (TOP)  
9. 9R-1766 [1] COVER-BOTTOM (BOTTOM)  
10. 9R-1767 [1] BOOT  
11. 9R-4917 [2] ROD-CONTROL  
12. 9R-8165 [4] BEARING  
13. 9R-9901 [4] FASTENER (CLIP)  
14. 9R-9941 [1] BRACKET AS  
  6V-4248 M [4] BOLT (M10X1.5X25-MM)  
15. 9R-9946 [1] JOINT AS  
16. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
17. 104-1970 [1] ROD AS  
18. 104-9488 [1] PLATE  
19. 107-5591 [1] NUT-JAM (3/4-16-THD)  
20. 110-8884 [1] PLATE  
21. 115-4343 [1] LEVER AS  
22. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
23. 138-6108 [2] SPACER (8.7X20X45-MM THK)  
24. 140-6021 [1] PLATE  
25. 145-4458 C [1] PIN  
26. 200-1790 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
27. 3S-2093 [1] STRAP-CABLE  
28. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
29. 8T-4121 [7] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4133 M [10] NUT (M10X1.5-THD)  
31. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
32. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
33. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-9515 M [3] BOLT-SOCKET HEAD (M10X1.5X40-MM)  
35. 9R-2806 [1] PIN  
36. 9R-2807 [2] CLIP (RETAINER)  
37. 9R-3067 [1] PIN  
38. 117-5671 A [1] BOOT  
    (PART OF 106-6261, 119-8172 & 119-8173 HYDRAULIC AR)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23880661
 

106-2404: CONTROL GP-HYDRAULIC LOCKOUT

106-2404 CONTROL GP-HYDRAULIC LOCKOUT
S/N 4ZN1-16043
AN ATTACHMENT
i00200824 SEBP2388
1062404 CONTROL GP-HYDRAULIC LOCKOUT Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-2405 [1] PLATE AS  
2. 106-2409 [1] PIN  
3. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
4. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
  M   METRIC PART
 

#SEBP23880662
 

106-6373: CONTROL GP-HYDRAULIC PEDAL

106-6373 CONTROL GP-HYDRAULIC PEDAL
S/N 4ZN1-16043
PART OF 106-6253, 121-8326, 121-8327, 121-8331 HYDRAULIC AR
AN ATTACHMENT
i00200838 SEBP2388
1066373 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0593 [1] PEDAL AS  
2. 133-8916 [1] FILM-INSTRUCTION (EXTENDABLE STICK)  
3. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 106-6374 [1] SUPPORT AS  
13. 9R-2614 [2] BEARING  
14. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
15. 8T-4773 [1] BALL JOINT  
16. 8T-4815 [1] ROD END  
17. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP23880663
 

113-0720: CONTROL GP-HYDRAULIC PEDAL

113-0720 CONTROL GP-HYDRAULIC PEDAL
S/N 4ZN1-16043
LEFT FT FACTORY
PART OF 119-4006, 121-8331 HYDRAULIC AR
AN ATTACHMENT
i00200884 SEBP2388
1130720 CONTROL GP-HYDRAULIC PEDAL Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 121-0592 [1] PEDAL AS  
2. 106-6374 [1] SUPPORT AS  
3. 9R-2614 [2] BEARING  
4. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
5. 8T-4133 M [4] NUT (M10X1.5-THD)  
6. 9R-2806 [1] PIN  
7. 9R-2807 [1] CLIP (RETAINER)  
8. 128-7341 [1] SHAFT AS  
9. 6V-8335 M [1] BOLT-SELF-LOCKING (M10X1.5X40-MM)  
10. 109-0533 [1] SEAL  
11. 155-6011 [1] ROD  
12. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
13. 6V-7744 M [1] LOCKNUT (M10X1.5-THD)  
14. 8T-4773 [1] BALL JOINT  
15. 8T-4815 [1] ROD END  
16. 195-6550 [1] WASHER-WAVE  
  M   METRIC PART
 

#SEBP23880664
 

153-9581: CONTROL GP-STEERING

153-9581 CONTROL GP-STEERING
S/N 4ZN5635-16043
PART OF 143-1780, 143-1781, 143-1783 DRIVE AR-BACKHOE LOADER
AN ATTACHMENT
i00727875 SEBP2388
1539581 CONTROL GP-STEERING Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 032-1557 [1] STEERING WHEEL  
2. 1V-9385 [1] COVER-EMBLEM  
3. 9K-5635 [1] SCREW-TAPPING (8-18X1-IN)  
 

#SEBP23880665
 

104-5963: CONTROL GP-STEERING & XMSN

104-5963 CONTROL GP-STEERING & XMSN
S/N 4ZN1-16043
AN ATTACHMENT
i00200799 SEBP2388
1045963 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 CM [2] BOLT (M10X1.5X25-MM)  
2. 7X-6325 [1] CLAMP-COLUMN  
3. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
4. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
5. 101-2902 [1] STEERING COLUMN AS  
6. 137-8899 C [1] CONTROL GP-TRANSMISSION  
7. 8Y-7199 [1] PLATE  
8. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP23880666
 

143-3336: CONTROL GP-STEERING & XMSN

143-3336 CONTROL GP-STEERING & XMSN
S/N 4ZN5635-16043
AN ATTACHMENT
i00713859 SEBP2388
1433336 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 135-4566 B [4] SHIM (0.5-MM THK)  
2. 6V-8227 M [1] NUT (M18X1.5-THD)  
3. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
4. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
5. 117-7038 [1] STEERING COLUMN  
5A. 149-0777 [1] KNOB  
5B. 149-0782 [1] KIT-TILT LEVER  
5C. 149-0783 [1] KIT-SHAFT  
5D. 149-0784 [1] KIT-HOUSING  
5E. 149-0785 [1] KIT-GAS SPRING  
6. 158-6209 [1] CONTROL GP-TRANSMISSION  
7. 8Y-7199 [1] PLATE  
8. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
11. 7X-6324 [1] CLAMP-COLUMN  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23880667
 

143-3337: CONTROL GP-STEERING & XMSN

143-3337 CONTROL GP-STEERING & XMSN
S/N 4ZN5635-16043
AN ATTACHMENT
i00697328 SEBP2388
1433337 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 101-2902 [1] STEERING COLUMN AS  
  6V-8227 M [1] NUT (M18X1.5-THD)  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-8874 M [1] NUT-WELD (M5X0.8-THD)  
  9D-6621 [2] NUT-WELD (10-24-THD)  
3. 143-4665 Y [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6325 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP23880668
 

8Y-7480: CONTROL GP-STEERING & XMSN

8Y-7480 CONTROL GP-STEERING & XMSN
S/N 4ZN1-16043
TILT
AN ATTACHMENT
i00200757 SEBP2388
8Y7480 CONTROL GP-STEERING & XMSN Parts scheme
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-8894 M [3] BOLT-SOCKET HEAD (M10X1.5X20-MM)  
2. 117-7038 [1] STEERING COLUMN  
2A. 149-0777 [1] KNOB  
2B. 149-0782 [1] KIT-TILT LEVER  
2C. 149-0783 [1] KIT-SHAFT  
2D. 149-0784 [1] KIT-HOUSING  
2E. 149-0785 [1] KIT-GAS SPRING  
3. 137-8899 [1] CONTROL GP-TRANSMISSION  
4. 8Y-7199 [1] PLATE  
5. 9X-2043 M [4] SCREW-TRUSS HEAD (M6X1X14-MM)  
6. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
7. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
8. 7X-6324 [1] CLAMP-COLUMN  
9. 9X-6615 M [4] BOLT (M5X0.8X30-MM)  
10. 6V-8227 M [1] NUT (M18X1.5-THD)  
11. 135-4566 B [4] SHIM (0.5-MM THK)(0.5 THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP23880669
 

143-4665: CONTROL GP-TRANSMISSION

143-4665 CONTROL GP-TRANSMISSION
S/N 4ZN5635-16043
4F-4R. POWERSHIFT
PART OF 143-3337 CONTROL GP-STEERING & XMSN
AN ATTACHMENT
i00669415 SEBP2388
  For full view, you need register

Parts for your 416C BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Operation and Maintenance Manual
Backhoe Extendable Stick Control (Foot Operated)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Four Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Foot Swing Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Standard Pattern) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Two Lever Control (Backhoe)(Excavator Pattern)
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Three Lever with Auxiliary Lever Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Backhoe Auxiliary Control (Foot Operated) - If Equipped
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Multipurpose Control
416C, 426C, 428C, 436C and 438C Backhoe Loaders
Special Instruction
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation Of 151-2595 Kit Controls, Four Lever Ford Style{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Field Installation of the 126-5004 Valve Control Group , Excavator Style Controls{5063}
Bracket Modification for Improved Control Groups{5063}
Bracket Modification for Improved Control Groups{5063}
Service Letter-NACD
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Product Support Program For Replacing The Loader Control Bracket On Certain 416C, 426C And 436C Backhoe Loaders
Service Letter-Americas
Technical Information Bulletin
E-Stick Pedal Linkage Change
E-Stick Pedal Linkage Change
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Identifying Backhoe Loaders with Foot-Operated Boom Swing Controls that are Referenced in Service Letter SEBE8639
Specifications
Hydraulic Hand Control (Loader)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Hydraulic Hand Control (Backhoe and Stabilizer)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Bank Valve (Loader Control)
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System
Service Magazine
New End Cover For Control Valve Group Can Be Used With Or Without Additional Hydraulic Circuits (Power Beyond) {5051}
1997/11/17
Stabilizer Warning System Equipped On C-Series With Power Shift Transmissions {5063,5258,5468,5481}
1998/06/08
Improved Tilt Stem Smoothes Out Bucket Movement{5051}
1999/07/26
New Resolver Valve Has Backup Ring To Prevent Seal Extrusion {5051}
1999/11/22
An Improved Bucket Lever Will Increase Service Life {5063}
2001/10/15
The Revised Special Instruction, REHS0325 , "Bracket Modification for Improved Control Groups" Can Be Ordered {5063}
2003/05/12

Caterpillar Parts SIS Catalog 416C :

CONTROL GP-HYDRAULIC HAND
9R-9939 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
9R-9705 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9416 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
139-9415 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
126-5004 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1842 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
112-1837 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC LOCKOUT
106-2404 CONTROL GP-HYDRAULIC LOCKOUT
CONTROL GP-HYDRAULIC PEDAL
106-6373 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-HYDRAULIC PEDAL
113-0720 CONTROL GP-HYDRAULIC PEDAL
CONTROL GP-STEERING
153-9581 CONTROL GP-STEERING
CONTROL GP-STEERING & XMSN
104-5963 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
143-3336 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
143-3337 CONTROL GP-STEERING & XMSN
CONTROL GP-STEERING & XMSN
8Y-7480 CONTROL GP-STEERING & XMSN

Truck sale:

Caterpillar 416C
 
Caterpillar 416C
- backhoe loader
FOLEY, INC.
Caterpillar 416C, bucket, Construction
4,063 
Caterpillar 416C, bucket, Construction
- bucket
FINNING CANADA
 
37,100 
Caterpillar 416C, backhoe loader, Construction


 
26,000 
Caterpillar 416C, backhoe loader, Construction


 
34,000 
Caterpillar 416C, backhoe loader, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.