ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP23900200
128-6861: WIRING GP-FUSE BOX
128-6861 WIRING GP-FUSE BOX
S/N 1DN1969-2253
PART OF 128-1211 WIRING GP-MACHINE
AN ATTACHMENT
S/N 1DN1969-2253
PART OF 128-1211 WIRING GP-MACHINE
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 125-1302 C | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 5C-2890 M | [2] | NUT (M6X1-THD) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1386 BE | SLEEVE | |||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LAMPS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 3. | 4B-4863 | [14] | WASHER (4.7X11X1.2-MM THK) | |
| 4. | 5P-8394 | [14] | SCREW-MACHINE (8-32X0.75-IN) | |
| 5. | 5S-7349 | [4] | BOLT (1/4-20X0.5-IN) | |
| 6. | 6V-8185 | [4] | NUT (1/4-20-THD) | |
| 7. | 7I-3978 | [1] | BOX AS | |
| 8. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 9. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 1H-3244 | [2] | LOCKWASHER | ||
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 10. | 9U-4958 | [1] | COVER AS | |
| 11. | 9W-1442 | [10] | FUSE (10-AMPERE) | |
| 12. | 9W-1446 | [1] | FUSE (20-AMPERE) | |
| 13. | 030-1193 | [2] | SCREW-MACHINE (10-32X19.05-MM) | |
| 14. | 178-7498 | [1] | HARNESS AS-BOX (POWER BOX) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | KIT-CONNECTING PLUG (2-PIN) | |||
| (INDLUDES PLUG AS & WEDGE) | ||||
| 7G-7917 | [1] | PLUG-SEAL | ||
| 7G-7918 | [1] | PLUG-SEAL | ||
| 7G-7919 | [2] | PLUG-SEAL | ||
| 8N-1517 | [1] | RECEPTACLE AS-CONNECTOR (25-PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 15. | 167-0138 CY | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 16. | 184-1579 | [1] | FILM-PANEL | |
| 17. | 122-4248 | [1] | WIRE AS | |
| 18. | 9W-1441 | [1] | FUSE (15-AMPERE) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900201
118-5366: WIRING GP-MACHINE
118-5366 WIRING GP-MACHINE
S/N 1DN1-979
PART OF 122-1981 CHASSIS AR
FOR USE WITH GRAPPLE AND CABLE MACHINES
S/N 1DN1-979
PART OF 122-1981 CHASSIS AR
FOR USE WITH GRAPPLE AND CABLE MACHINES
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 | [41] | STRAP-CABLE | |
| 3. | 4P-8134 | [18] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 3E-9350 | [1] | SWITCH AS-TEMPERATURE (TRANSMISSION OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 9X-7781 Y | [1] | SWITCH GP-BYPASS (TRANSMISSION OIL FILTER) | |
| 7. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 5M-3062 | [5] | BOLT (3/8-16X0.75-IN) | |
| 9. | 117-9364 | [1] | CONTROL GP-RELAY | |
| 10. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 11. | 126-3898 | [1] | HARNESS AS-ENGINE | |
| 12. | 118-2938 | [1] | HARNESS AS-CHASSIS | |
| 13. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 15. | 122-4247 Y | [1] | WIRING GP-FUSE BOX | |
| 16. | 6Y-6584 | [2] | STRAP AS-GROUND | |
| 17. | 119-5708 | [1] | CLIP | |
| 18. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 19. | 5K-0906 | [4] | BOLT (5/16-18X0.625-IN) | |
| 20. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 21. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 22. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 23. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 24. | 9G-9150 | [2] | CLIP | |
| 25. | 126-4927 | [1] | HARNESS AS-REAR | |
| 26. | 100-2832 | [1] | HARNESS AS-TRANSMISSION | |
| 27. | 4P-7428 | [1] | CLIP (LADDER) | |
| 28. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900202
126-2835: WIRING GP-MACHINE
126-2835 WIRING GP-MACHINE
S/N 1DN1-2253
PART OF 125-9165 CAB AR-OPEN ROPS, 143-3561 SKIDDER AR-CABLE
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
S/N 1DN1-2253
PART OF 125-9165 CAB AR-OPEN ROPS, 143-3561 SKIDDER AR-CABLE
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 | [37] | STRAP-CABLE | |
| 3. | 4P-8134 | [15] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 4P-7581 | [6] | CLIP (LADDER) | |
| 6. | 9X-7781 Y | [1] | SWITCH GP-BYPASS (TRANSMISSION OIL FILTER) | |
| 7. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 9. | 9G-9150 | [1] | CLIP | |
| 10. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 11. | 136-7393 | [1] | HARNESS AS-ENGINE | |
| 12. | 126-1484 | [1] | HARNESS AS-CHASSIS | |
| 13. | 126-1489 | [1] | HARNESS AS-REAR | |
| 14. | 100-2832 | [1] | HARNESS AS-TRANSMISSION | |
| 15. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 17. | 126-9504 Y | [1] | WIRING GP-FUSE BOX | |
| 18. | 8X-6645 | [1] | STRAP AS-GROUND | |
| 19. | 4P-7428 | [1] | CLIP (LADDER) | |
| 20. | 119-5708 | [1] | CLIP | |
| 21. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 22. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 23. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 5K-0906 | [3] | BOLT (5/16-18X0.625-IN) | |
| 25. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 26. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 27. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 28. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 7K-1181 | [25] | STRAP-CABLE | |
| 30. | 4K-8864 | [1] | CLIP | |
| 31. | 3N-6118 | [1] | BRACKET | |
| 32. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 33. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 34. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 35. | 9U-1420 | [1] | WIRE AS | |
| 36. | 9G-3695 | [2] | PLUG-SEAL | |
| 37. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900203
126-2835: WIRING GP-MACHINE
126-2835 WIRING GP-MACHINE
S/N 1DN1969-2253
PART OF 125-9165 CAB AR-OPEN ROPS
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
S/N 1DN1969-2253
PART OF 125-9165 CAB AR-OPEN ROPS
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 | [37] | STRAP-CABLE | |
| 3. | 4P-8134 C | [17] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 4P-7581 C | [7] | CLIP (LADDER) | |
| 7. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 9. | 9G-9150 | [1] | CLIP | |
| 10. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 11. | 177-4680 | [1] | HARNESS AS-ENGINE | |
| 12. | 126-1484 | [1] | HARNESS AS-CHASSIS | |
| 13. | 126-1489 | [1] | HARNESS AS-REAR | |
| 14. | 163-1662 C | [1] | HARNESS AS-TRANSMISSION | |
| 15. | 8T-4896 | [9] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 16. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 17. | 126-9504 Y | [1] | WIRING GP-FUSE BOX | |
| 18. | 8X-6645 | [1] | STRAP AS-GROUND | |
| 20. | 119-5708 | [1] | CLIP | |
| 21. | 8T-4191 CM | [2] | BOLT (M10X1.5X16-MM) | |
| 23. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 24. | 5K-0906 | [3] | BOLT (5/16-18X0.625-IN) | |
| 25. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 26. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 27. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 28. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 29. | 7K-1181 | [25] | STRAP-CABLE | |
| 30. | 4K-8864 | [1] | CLIP | |
| 31. | 3N-6118 | [1] | BRACKET | |
| 32. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 33. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 34. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 35. | 9U-1420 | [1] | WIRE AS | |
| 36. | 9G-3695 | [2] | PLUG-SEAL | |
| 37. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900204
126-2835: WIRING GP-MACHINE
126-2835 WIRING GP-MACHINE
S/N 1DN1969-2253
PART OF 125-9165 CAB AR-OPEN ROPS
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
S/N 1DN1969-2253
PART OF 125-9165 CAB AR-OPEN ROPS
FOR USE WITH CABLE MACHINES-OPEN ROPS
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [2] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 | [36] | STRAP-CABLE | |
| 3. | 4P-8134 | [17] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 4B-2049 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 5. | 4P-7581 | [7] | CLIP (LADDER) | |
| 6. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 5M-3062 | [6] | BOLT (3/8-16X0.75-IN) | |
| 8. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 9. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 10. | 178-7500 | [1] | HARNESS AS-ENGINE | |
| 11. | 177-7555 | [1] | HARNESS AS-CHASSIS | |
| 12. | 126-1489 | [1] | HARNESS AS-REAR | |
| 13. | 8T-4896 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4L-6454 | [3] | BOLT (3/8-16X1-IN) | |
| 15. | 126-9504 Y | [1] | WIRING GP-FUSE BOX | |
| 16. | 140-0860 | [1] | STRAP AS-GROUND | |
| 17. | 163-1662 | [1] | HARNESS AS-TRANSMISSION | |
| 18. | 119-5708 | [1] | CLIP | |
| 19. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 20. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 5K-0906 | [3] | BOLT (5/16-18X0.625-IN) | |
| 22. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 23. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 24. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 25. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 7K-1181 | [24] | STRAP-CABLE | |
| 27. | 4K-8864 | [1] | CLIP | |
| 28. | 3N-6118 | [1] | BRACKET | |
| 29. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 30. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 31. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 32. | 9G-3695 | [2] | PLUG-SEAL | |
| 33. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 34. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900205
128-1211: WIRING GP-MACHINE
128-1211 WIRING GP-MACHINE
S/N 1DN1-1264
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 122-1981 CHASSIS AR, 122-3400 GRAPPLE AR
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
ALSO AN ATTACHMENT
S/N 1DN1-1264
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 122-1981 CHASSIS AR, 122-3400 GRAPPLE AR
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
ALSO AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 | [39] | STRAP-CABLE | |
| 3. | 4P-8134 | [27] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 5. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 6. | 9X-7781 Y | [1] | SWITCH GP-BYPASS (TRANSMISSION OIL FILTER) | |
| 7. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 8. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 9. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 10. | 6Y-6584 | [2] | STRAP AS-GROUND | |
| 11. | 128-0824 | [1] | HARNESS AS-CHASSIS | |
| 12. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 8T-4896 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 14. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 15. | 128-6861 Y | [1] | WIRING GP-FUSE BOX | |
| 16. | 119-5708 | [1] | CLIP | |
| 17. | 8T-4224 | [6] | WASHER-HARD (8.8X16X2-MM THK) | |
| 18. | 5K-0906 | [4] | BOLT (5/16-18X0.625-IN) | |
| 19. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 20. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 21. | 136-7395 | [1] | HARNESS AS-ENGINE | |
| 22. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 23. | 7K-1181 | [26] | STRAP-CABLE | |
| 24. | 3N-6118 | [1] | BRACKET | |
| 25. | 4K-8864 | [1] | CLIP | |
| 26. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 27. | 100-2832 | [1] | HARNESS AS-TRANSMISSION | |
| 28. | 134-2614 | [1] | HARNESS AS-REAR | |
| 29. | 4P-7581 | [1] | CLIP (LADDER) | |
| 30. | 9G-9150 | [8] | CLIP | |
| 31. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 32. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900206
128-1211: WIRING GP-MACHINE
128-1211 WIRING GP-MACHINE
S/N 1DN1175-1968
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 122-1987, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
S/N 1DN1175-1968
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 122-1987, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1A. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 1B. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 C | [42] | STRAP-CABLE | |
| 3. | 4P-8134 | [20] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 5. | 9X-7781 Y | [1] | SWITCH GP-BYPASS (TRANSMISSION OIL FILTER) | |
| 6. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 7. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 8. | 9G-9150 | [7] | CLIP | |
| 9. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 10. | 6Y-6584 | [2] | STRAP AS-GROUND | |
| 11. | 128-0824 | [1] | HARNESS AS-CHASSIS | |
| 12. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 100-2832 | [1] | HARNESS AS-TRANSMISSION | |
| 14. | 8T-4896 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 16. | 128-6861 Y | [1] | WIRING GP-FUSE BOX | |
| 17. | 147-0358 C | [1] | HARNESS AS-REAR | |
| 18. | 4P-7581 | [7] | CLIP (LADDER) | |
| 19. | 119-5708 | [1] | CLIP | |
| 20. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 22. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 5K-0906 | [5] | BOLT (5/16-18X0.625-IN) | |
| 24. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 25. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 26. | 136-7395 | [1] | HARNESS AS-ENGINE | |
| 27. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 28. | 7K-1181 | [34] | STRAP-CABLE | |
| 29. | 3N-6118 | [1] | BRACKET | |
| 30. | 4K-8864 | [1] | CLIP | |
| 31. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 32. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 33. | 9U-1420 | [1] | WIRE AS | |
| 34. | 9G-3695 | [2] | PLUG-SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900207
128-1211: WIRING GP-MACHINE
128-1211 WIRING GP-MACHINE
S/N 1DN1969-2253
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
Type 1
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
S/N 1DN1969-2253
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
Type 1
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1A. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(TORQUE CONVERTER) | |
| 1B. | 7N-8532 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(ENGINE COOLANT) | |
| 2. | 3S-2093 C | [38] | STRAP-CABLE | |
| 3. | 4P-8134 C | [22] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT)(HYDRAULIC OIL) | |
| 6. | 101-5459 | [1] | SWITCH AS-PRESSURE (ENGINE OIL) | |
| 7. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 8. | 9G-9150 C | [1] | CLIP | |
| 9. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 10. | 6Y-6584 | [2] | STRAP AS-GROUND | |
| 11. | 128-0824 | [1] | HARNESS AS-CHASSIS | |
| 12. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 13. | 163-1662 C | [1] | HARNESS AS-TRANSMISSION | |
| 14. | 8T-4896 | [11] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 16. | 128-6861 Y | [1] | WIRING GP-FUSE BOX | |
| 17. | 147-0358 | [1] | HARNESS AS-REAR | |
| 18. | 4P-7581 C | [3] | CLIP (LADDER) | |
| 19. | 119-5708 | [1] | CLIP | |
| 20. | 8T-4191 CM | [2] | BOLT (M10X1.5X16-MM) | |
| 22. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 23. | 5K-0906 | [5] | BOLT (5/16-18X0.625-IN) | |
| 24. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 25. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 26. | 177-4677 | [1] | HARNESS AS-ENGINE | |
| 27. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 28. | 7K-1181 | [34] | STRAP-CABLE | |
| 29. | 3N-6118 | [1] | BRACKET | |
| 30. | 4K-8864 | [1] | CLIP | |
| 31. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 32. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 33. | 9U-1420 | [1] | WIRE AS | |
| 34. | 9G-3695 | [2] | PLUG-SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900208
128-1211: WIRING GP-MACHINE
128-1211 WIRING GP-MACHINE
S/N 1DN1969-2253
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
Type 2
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
S/N 1DN1969-2253
PART OF 133-8279 CAB AR-ENCLOSED ROPS, 147-1051, 148-2690 GRAPPLE AR, 133-6536 GRAPPLE AR-SWING, 133-3578 INDUSTRIAL AR-HYDRAULIC
Type 2
FOR USE WITH CABLE MACHINES-ENCLOSED ROPS & GRAPPLE MACHINES
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7N-8532 | [2] | SENDER AS-TEMPERATURE (12-VOLT) | |
| (EACH INCLUDES) | ||||
| 6V-8378 | [1] | NUT (10-32-THD) | ||
| 8F-1434 | [1] | LOCKWASHER | ||
| 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | ||
| 2. | 3S-2093 | [37] | STRAP-CABLE | |
| 3. | 4P-8134 | [22] | CLIP (LADDER) | |
| 4. | 4W-9972 | [1] | SENDER AS-TEMPERATURE (12-VOLT) | |
| 5. | 101-5459 | [1] | SWITCH AS-PRESSURE | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 6. | 5M-3062 | [7] | BOLT (3/8-16X0.75-IN) | |
| 7. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8. | 6V-8188 | [3] | NUT (1/2-13-THD) | |
| 9. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 10. | 177-7553 | [1] | HARNESS AS-CHASSIS | |
| 11. | 8T-4223 | [3] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 8T-4896 | [13] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 14. | 128-6861 Y | [1] | WIRING GP-FUSE BOX | |
| 15. | 147-0358 | [1] | HARNESS AS-REAR | |
| 16. | 4P-7581 | [3] | CLIP (LADDER) | |
| 17. | 119-5708 | [1] | CLIP | |
| 18. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 19. | 8T-4224 | [7] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 5K-0906 | [5] | BOLT (5/16-18X0.625-IN) | |
| 21. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 22. | 117-9364 | [1] | CONTROL GP-RELAY (BACKUP ALARM) | |
| 23. | 178-7501 | [1] | HARNESS AS-ENGINE | |
| 24. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 25. | 7K-1181 | [33] | STRAP-CABLE | |
| 26. | 3N-6118 | [1] | BRACKET | |
| 27. | 4K-8864 | [1] | CLIP | |
| 28. | 8T-5391 | [2] | BOLT (5/16-18X0.5-IN) | |
| 29. | 7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | |
| 30. | 9G-3695 | [2] | PLUG-SEAL | |
| 31. | 163-1662 | [1] | HARNESS AS-TRANSMISSION | |
| 32. | 163-1201 | [1] | HORN AS (24-VOLT, LOW TONE) | |
| 177-9853 | [1] | RECEPTACLE AS (2-PIN) | ||
| 178-3586 | [1] | LOCK | ||
| 33. | 9B-7237 | [1] | BOLT (3/8-16X1.25-IN) | |
| 34. | 140-0860 | [1] | STRAP AS-GROUND | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900209
123-7740: WIRING GP-OPEN ROPS
123-7740 WIRING GP-OPEN ROPS
S/N 1DN1-627
PART OF 122-1930 CAB AR-OPEN ROPS
FOR USE WITH GRAPPLE MACHINES
AN ATTACHMENT
S/N 1DN1-627
PART OF 122-1930 CAB AR-OPEN ROPS
FOR USE WITH GRAPPLE MACHINES
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 2. | 5M-3062 | [2] | BOLT (3/8-16X0.75-IN) | |
| 3. | 8C-9660 | [32] | WASHER (4.6X7.9X0.8-MM THK) | |
| 4. | 6B-4540 | [16] | NUT (4-40-THD) | |
| 5. | 2S-6251 | [16] | SCREW (4-40X0.75-IN) | |
| 6. | 124-6932 | [1] | PLATE AS | |
| 9F-6445 | [1] | NUT-WELD (1/4-20-THD) | ||
| 7. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 8. | 124-2934 | [2] | PLATE | |
| 9. | 107-6032 | [1] | LAMP AS-DOME (24-VOLT) | |
| 10. | 3E-0109 | [1] | PLUG (ROCKER SWITCH) | |
| 11. | 3E-8859 | [1] | SWITCH AS (DIFFERENTIAL LOCK) | |
| 3E-9329 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 12. | 4D-1326 | [1] | LOCKWASHER (EXTERNAL TOOTH) | |
| 13. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 14. | 3S-2093 B | [4] | STRAP-CABLE | |
| 15. | 126-3899 | [1] | HARNESS AS-DASH | |
| 16. | 7D-5473 | [4] | BOLT-SOCKET HEAD (8-32X0.75-IN) | |
| 17. | 4B-4863 | [4] | WASHER (4.7X11X1.2-MM THK) | |
| 18. | 4B-2043 | [4] | NUT (8-32-THD) | |
| 19. | 123-9233 | [1] | PLATE | |
| 20. | 4D-1326 | [2] | LOCKWASHER (EXTERNAL TOOTH) | |
| 21. | 6V-8801 | [2] | NUT (3/8-16-THD) | |
| 22. | 3S-2093 B | [55] | STRAP-CABLE | |
| 23. | 123-3726 | [1] | HARNESS AS-RADIO (SPEAKERS) | |
| 24. | 130-9740 | [1] | HARNESS AS-CAB (UPPER) | |
| 25. | 3E-8769 | [1] | SWITCH AS (24-VOLT)(FRONT FLOOD) | |
| 3E-8782 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 26. | 3E-8769 | [1] | SWITCH AS (24-VOLT)(REAR FLOOD) | |
| 123-5848 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 27. | 3E-8768 | [1] | SWITCH AS (24-VOLT)(WASHER) | |
| 123-6362 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 28. | 3E-0109 | [1] | PLUG (ROCKER SWITCH) | |
| 29. | 3E-8861 | [1] | SWITCH AS (FRONT WIPER) | |
| 123-6364 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| 30. | 3E-8769 | [1] | SWITCH AS (24-VOLT)(RIGHT DEFROST FAN) | |
| 3E-8786 | [1] | ACTUATOR | ||
| 31. | 118-2937 | [1] | HARNESS AS-CAB (LOWER) | |
| 32. | 1M-4543 | [1] | GROMMET | |
| 33. | 7Y-8169 | [2] | GROMMET | |
| 34. | 5P-6264 | [1] | GROMMET | |
| 35. | 3E-8769 | [1] | SWITCH AS (24-VOLT)(LEFT/RIGHT DEFROST FAN) | |
| 3E-8786 | [1] | ACTUATOR | ||
| 3E-8825 | [1] | LAMP (24-VOLT) | ||
| B | USE AS REQUIRED | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Engine News
Special Instruction
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Service Magazine
