HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULICWORK TOOLS
GRAPPLE GPWINCH GP
HYDRAULIC SYSTEM
CONTROL GP-WINCH HYDRAULIC
#SEBP23900690
159-2815: CONTROL GP-WINCH
159-2815 CONTROL GP-WINCH
S/N 1DN1870-1981
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
AN ATTACHMENT
S/N 1DN1870-1981
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-7141 C | [1] | ROD | |
| 2. | 5G-6417 | [1] | SPACER (15-MM THK) | |
| 3. | 5P-7704 | [1] | ROD END | |
| 4. | 2A-1736 | [1] | HANDLE | |
| 5. | 6D-5974 | [2] | BEARING-ROLLER | |
| 6. | 6V-8187 C | [3] | NUT (1/4-28-THD) | |
| 7. | 8B-4132 | [2] | BEARING AS-NEEDLE | |
| 8. | 8D-8279 | [2] | WASHER-THRUST | |
| 9. | 8F-7702 | [2] | SEAL-LIP TYPE | |
| 10. | 8G-6716 | [1] | SUPPORT | |
| 11. | 9F-6655 | [1] | WASHER (0.766X1.5X0.125-IN) | |
| 12. | 9X-9923 | [1] | CABLE AS | |
| 13. | 122-9449 | [1] | LEVER AS | |
| 122-9442 | [1] | ROD | ||
| 14. | 169-0175 | [1] | LEVER | |
| 15. | 173-8286 C | [1] | PLATE AS | |
| 16. | 161-6623 | [1] | SHAFT AS | |
| 17. | [1] | LEVER AS | ||
| 18. | 106-9898 C | [2] | END-YOKE ROD | |
| 19. | 1H-7459 | [1] | GROMMET | |
| 20. | 2M-8340 | [1] | ROD END | |
| 21. | 2J-6356 | [1] | RING-RETAINING | |
| 22. | 3B-4607 | [3] | PIN-COTTER | |
| 23. | 3B-4615 | [1] | PIN-COTTER | |
| 24. | 8T-4137 CM | [5] | BOLT (M10X1.5X20-MM) | |
| 25. | 4M-6425 | [1] | BOLT (5/16-18X1-IN) | |
| 27. | 6W-5752 | [1] | PIN | |
| 28. | 8P-4871 C | [1] | ROD | |
| 29. | 6V-3338 | [1] | END-YOKE ROD | |
| 30. | 9S-5585 | [1] | NUT-FULL (1/2-20-THD) | |
| 0L-1013 | [1] | NUT (1/2-20-THD) | ||
| 31. | 6V-8189 | [2] | NUT (5/16-18-THD) | |
| 32. | 7B-7210 | [1] | PIN | |
| 33. | 8C-3121 | [1] | BOLT (5/16-18X1.5-IN) | |
| 34. | 8K-1255 | [2] | PIN | |
| 35. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 8T-4121 C | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 37. | 9G-9923 | [1] | PIN | |
| 38. | 174-4166 C | [1] | FILM-NOTICE (WINCH OPERATION) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP23900691
159-2815: CONTROL GP-WINCH
159-2815 CONTROL GP-WINCH
S/N 1DN1982-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
AN ATTACHMENT
S/N 1DN1982-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-7141 | [1] | ROD | |
| 2. | 5G-6417 | [1] | SPACER (15-MM THK) | |
| 3. | 5P-7704 | [1] | ROD END | |
| 4. | 2A-1736 | [1] | HANDLE | |
| 5. | 6D-5974 | [2] | BEARING-ROLLER | |
| 6. | 6V-8187 C | [4] | NUT (1/4-28-THD) | |
| 7. | 8B-4132 | [2] | BEARING AS-NEEDLE | |
| 8. | 8D-8279 | [2] | WASHER-THRUST | |
| 9. | 8F-7702 | [2] | SEAL-LIP TYPE | |
| 10. | 8G-6716 | [1] | SUPPORT | |
| 11. | 9F-6655 | [1] | WASHER (0.766X1.5X0.125-IN) | |
| 12. | 9X-9923 | [1] | CABLE AS | |
| 13. | 122-9449 | [1] | LEVER AS | |
| 122-9442 | [1] | ROD | ||
| 14. | 169-0175 | [1] | LEVER | |
| 15. | 173-8286 | [1] | PLATE AS | |
| 16. | 161-6623 | [1] | SHAFT AS | |
| 17. | [1] | LEVER AS | ||
| 18. | 174-4166 | [1] | FILM-NOTICE (WINCH OPERATION) | |
| 19. | 1H-7459 | [1] | GROMMET | |
| 20. | 2M-8340 | [1] | ROD END | |
| 21. | 2J-6356 | [1] | RING-RETAINING | |
| 22. | 3B-4607 | [3] | PIN-COTTER | |
| 23. | 3B-4615 | [1] | PIN-COTTER | |
| 24. | 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | |
| 25. | 4M-6425 | [1] | BOLT (5/16-18X1-IN) | |
| 27. | 6W-5752 | [1] | PIN | |
| 28. | 8P-4871 | [1] | ROD | |
| 29. | 6V-3338 C | [3] | END-YOKE ROD | |
| 30. | 9S-5585 | [2] | NUT-FULL (1/2-20-THD) | |
| 31. | 6V-8189 C | [1] | NUT (5/16-18-THD) | |
| 32. | 7B-7210 C | [3] | PIN | |
| 33. | 9G-9923 | [1] | PIN | |
| 34. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 35. | 8T-4224 C | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 36. | 174-7920 | [1] | FILM-INSTRUCTION (WINCH CONTROL) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
#SEBP23900692
172-0314: CONTROL GP-WINCH HYDRAULIC
172-0314 CONTROL GP-WINCH HYDRAULIC
S/N 1DN1839-2253
PART OF 159-0046 WINCH GP, 159-0044 WINCH GP-SKIDDER
AN ATTACHMENT
S/N 1DN1839-2253
PART OF 159-0046 WINCH GP, 159-0044 WINCH GP-SKIDDER
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 135-4907 | [1] | PLUG | |
| 2. | 158-6530 | [2] | FITTING AS | |
| 3. | 161-6464 | [1] | RETAINER-SPRING | |
| 4. | 162-0188 | [1] | SEAL | |
| 5. | 172-0315 | [1] | BODY-SELECTOR VALVE | |
| 6. | 172-0316 | [1] | SPOOL AS | |
| 4B-4278 | [3] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 228-5325 | [1] | BOLT-SELF-LOCKING | ||
| 161-6460 | [1] | WASHER | ||
| 161-6463 | [1] | WASHER | ||
| 176-1311 | [1] | SPRING | ||
| 7. | 173-9887 | [1] | VALVE AS-RELIEF | |
| 8. | 173-9890 | [3] | ORIFICE | |
| 9. | 102-0883 | [1] | PLUG-PIPE | |
| 10. | 7M-8485 | [3] | SEAL-O-RING | |
| 11. | 9S-9334 | [1] | PLUG-O-RING |
#SEBP23900693
187-5392: CONTROL GP-WINCH HYDRAULIC
187-5392 CONTROL GP-WINCH HYDRAULIC
S/N 1DN1-2253
PART OF 159-0046 WINCH GP
AN ATTACHMENT
S/N 1DN1-2253
PART OF 159-0046 WINCH GP
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 112-8732 | [2] | COUPLER AS | |
| (EACH INCLUDES) | ||||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 6V-0852 | [1] | CAP-DUST | ||
| 110-6349 | [1] | FITTING AS (QUICK DISCONNECT) | ||
| 2. | 135-4907 | [1] | PLUG | |
| 3. | 161-6464 | [1] | RETAINER-SPRING | |
| 4. | 162-0188 | [1] | SEAL | |
| 5. | 172-0315 | [1] | BODY-SELECTOR VALVE | |
| 6. | 172-0316 | [1] | SPOOL AS | |
| 4B-4278 | [3] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 228-5325 | [1] | BOLT-SELF-LOCKING | ||
| 161-6460 | [1] | WASHER | ||
| 161-6463 | [1] | WASHER | ||
| 176-1311 | [1] | SPRING | ||
| 7. | 173-9887 | [1] | VALVE AS-RELIEF (WINCH BRAKE) | |
| 8. | 187-5393 | [1] | ORIFICE | |
| 9. | 102-0883 | [1] | PLUG-PIPE | |
| 10. | 7M-8485 | [1] | SEAL-O-RING | |
| 11. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 12. | 9S-9334 | [1] | PLUG-O-RING | |
#SEBP23900694
126-0878: CROSSHEAD GP-GRAPPLE
126-0878 CROSSHEAD GP-GRAPPLE
S/N 1DN1-2253
PART OF 123-6788, 123-6789, 157-6005, 157-6009, 158-2305 GRAPPLE AR-BUNCHING, 123-6785, 123-6786 GRAPPLE AR-SORTING
AN ATTACHMENT
S/N 1DN1-2253
PART OF 123-6788, 123-6789, 157-6005, 157-6009, 158-2305 GRAPPLE AR-BUNCHING, 123-6785, 123-6786 GRAPPLE AR-SORTING
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 174-7114 | [1] | LINK | |
| 2. | 2K-0227 | [4] | BUSHING | |
| 3. | 131-1832 | [4] | DISC-FRICTION | |
| 4. | 178-8002 | [4] | RETAINER | |
| 5. | 158-3645 | [4] | SPRING AS | |
| 6. | 158-3646 | [2] | SPACER | |
| 7. | 125-0123 | [2] | PIN | |
| 8. | 196-5490 | [2] | PIN | |
| 9. | 125-0141 | [2] | PLATE-LOCK | |
| 10. | 125-0142 | [2] | NUT-ACORN | |
| 11. | 8T-6430 M | [2] | BOLT (M20X2.5X50-MM) | |
| 12. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 13. | 7K-9203 | [4] | SEAL-LIP TYPE | |
| M | METRIC PART | |||
#SEBP23900695
157-6025: CROSSHEAD GP-GRAPPLE
157-6025 CROSSHEAD GP-GRAPPLE
S/N 1DN1-2253
PART OF 157-6009, 158-2305 GRAPPLE AR-BUNCHING, 123-6785, 123-6786 GRAPPLE AR-SORTING
AN ATTACHMENT
S/N 1DN1-2253
PART OF 157-6009, 158-2305 GRAPPLE AR-BUNCHING, 123-6785, 123-6786 GRAPPLE AR-SORTING
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 158-3642 | [1] | LINK | |
| 2. | [4] | CONE | ||
| 3. | [4] | RETAINER | ||
| 4. | 158-3645 | [4] | SPRING AS | |
| 5. | 158-3646 | [2] | SPACER | |
| 6. | 125-0123 | [2] | PIN | |
| 7. | 125-0142 | [2] | NUT-ACORN | |
| 8. | 125-0141 | [2] | PLATE-LOCK | |
| 9. | 8T-6430 M | [2] | BOLT (M20X2.5X50-MM) | |
| 10. | 8T-4123 | [2] | WASHER (3.62X5.75X0.375-MM THK) | |
| 11. | 196-5490 | [2] | PIN | |
| M | METRIC PART | |||
#SEBP23900696
9U-0638: DRIVE GP-WINCH
9U-0638 DRIVE GP-WINCH
S/N 1DN1-2253
PART OF 159-0040, 159-0041, 9U-2879 WINCH AR-SKIDDER
Type 1
AN ATTACHMENT
S/N 1DN1-2253
PART OF 159-0040, 159-0041, 9U-2879 WINCH AR-SKIDDER
Type 1
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 | [1] | BOLT (1/2-13X1.75-IN) | |
| 2. | 2S-1654 | [1] | WASHER (3.5X44.5X6-MM THK)(6.0MM THK) | |
| 3. | 8K-8518 B | [2] | SHIM PACK (INCLUDES 20-SHIMS)(INCL 20 SHIMS) | |
| 4. | 7K-5448 | [2] | CUP-BEARING | |
| 5. | 7K-5449 | [2] | CONE-BEARING | |
| 6. | 5S-4408 | [2] | SEAL-LIP TYPE | |
| 7. | 106-4014 Y | [1] | SLIP JOINT GP | |
| 8. | 106-4015 Y | [1] | SHAFT GP-WINCH DRIVE | |
| 9. | 3B-8488 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 10. | 5V-2545 | [4] | STRAP | |
| 11. | 5D-8269 | [8] | BOLT-12 POINT HEAD (5/16-24X0.75-IN)(5/16-24X.75IN) | |
| 12. | 7X-0346 | [6] | BOLT (5/8-11X2-IN) | |
| 13. | 8T-4122 | [6] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 8R-7756 | [1] | YOKE | |
| 15. | 9U-4894 | [1] | SUPPORT AS | |
| 16. | 115-3201 | [1] | YOKE-SHAFT | |
| 17. | 6V-3940 M | [5] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900697
9U-0638: DRIVE GP-WINCH
9U-0638 DRIVE GP-WINCH
S/N 1DN1-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
Type 2
AN ATTACHMENT
S/N 1DN1-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
Type 2
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 | [1] | BOLT (1/2-13X1.75-IN) | |
| 2. | 2S-1654 | [1] | WASHER (3.5X44.5X6-MM THK) | |
| 3. | 8K-8518 B | [2] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 4. | 7K-5448 | [2] | CUP-BEARING | |
| 5. | 7K-5449 | [2] | CONE-BEARING | |
| 6. | 5S-4408 | [2] | SEAL-LIP TYPE | |
| 7. | 106-4014 Y | [1] | SLIP JOINT GP | |
| 8. | 160-5491 C | [1] | SHAFT GP-WINCH DRIVE | |
| 9. | 3B-8488 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 10. | 5V-2545 | [4] | STRAP | |
| 11. | 5D-8269 | [8] | BOLT-12 POINT HEAD (5/16-24X0.75-IN) | |
| 12. | 7X-0346 | [6] | BOLT (5/8-11X2-IN) | |
| 13. | 8T-4122 | [6] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 8R-7756 | [1] | YOKE | |
| 15. | 9U-4894 | [1] | SUPPORT AS | |
| 16. | 115-3201 | [1] | YOKE-SHAFT | |
| 17. | 6V-3940 M | [5] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900698
9U-0638: DRIVE GP-WINCH
9U-0638 DRIVE GP-WINCH
S/N 1DN1-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
Type 3
AN ATTACHMENT
S/N 1DN1-2253
PART OF 159-0040, 159-0041 WINCH AR-SKIDDER
Type 3
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1587 | [1] | BOLT (1/2-13X1.75-IN) | |
| 2. | 2S-1654 | [1] | WASHER (3.5X44.5X6-MM THK) | |
| 3. | 8K-8518 B | [2] | SHIM PACK (INCLUDES 20-SHIMS) | |
| 4. | 7K-5448 | [2] | CUP-BEARING | |
| 5. | 7K-5449 | [2] | CONE-BEARING | |
| 6. | 5S-4408 | [2] | SEAL-LIP TYPE | |
| 7. | 106-4014 Y | [1] | SLIP JOINT GP | |
| 8. | 198-7665 C | [1] | SHAFT GP-DRIVE | |
| 9. | 3B-8488 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 10. | 5V-2545 | [4] | STRAP | |
| 11. | 5D-8269 | [8] | BOLT-12 POINT HEAD (5/16-24X0.75-IN) | |
| 12. | 7X-0346 | [6] | BOLT (5/8-11X2-IN) | |
| 13. | 8T-4122 | [6] | WASHER-HARD (17X32X3.5-MM THK) | |
| 14. | 8R-7756 | [1] | YOKE | |
| 15. | 9U-4894 | [1] | SUPPORT AS | |
| 16. | 115-3201 | [1] | YOKE-SHAFT | |
| 17. | 6V-3940 M | [5] | BOLT (M8X1.25X25-MM) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23900699
161-6404: DRUM GP-WINCH
161-6404 DRUM GP-WINCH
S/N 1DN688-2253
GRAPPLE
PART OF 159-0044 WINCH GP-SKIDDER
AN ATTACHMENT
S/N 1DN688-2253
GRAPPLE
PART OF 159-0044 WINCH GP-SKIDDER
AN ATTACHMENT
For full view, you need register
Parts for your 525 WHEEL SKIDDER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-3934 | [2] | CUP-BEARING | |
| 2. | 1P-3935 | [2] | CONE-BEARING | |
| 3. | 2H-3786 | [1] | NUT-JAM (1-14-THD) | |
| 4. | 3B-4512 | [7] | LOCKWASHER | |
| 5. | 3B-8489 | [1] | FITTING-GREASE (1/8-27 PTF) | |
| 6. | 6S-4531 | [1] | LOCKNUT | |
| 7. | 161-6414 | [1] | DRUM-CABLE | |
| 8. | 161-6416 | [1] | COVER | |
| 9. | 161-6417 | [1] | DISC-BRAKE | |
| 10. | 184-8067 | [1] | COVER-DRUM | |
| 11. | [1] | RETAINER-SPRING | ||
| 12. | 162-0174 | [1] | SPRING | |
| 13. | 162-2762 | [1] | SCREW | |
| 14. | 173-4531 | [1] | PLUG-EXPANSION | |
| 15. | 176-0029 | [1] | GASKET | |
| 16. | 032-9882 | [1] | SEAL-O-RING | |
| 17. | 061-7706 | [2] | PIN-DOWEL | |
| 18. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 19. | 5M-2894 | [5] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 5P-8250 | [1] | WASHER (28X49X5-MM THK) | |
| 21. | 6J-3473 | [2] | RING-SNAP | |
| 22. | 9X-7713 | [2] | SEAL-LIP TYPE | |
| 23. | 9X-8885 | [7] | BOLT (3/4-10X2.25-IN) | |
| 24. | 219-7935 | [1] | PLATE | |
| 25. | 5M-3062 | [1] | BOLT (3/8-16X0.75-IN) | |
