AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

122-1248 BASE GP-VALVE COVER & INJ HARN S/N 5EK16784-99999; 6TS1-UP ALSO AN ATTACHMENT 3406E TRUCK ENGINE


BASIC ENGINE
VALVE MECHANISM GP
BELT TIGHTENER GP
ENGINE BRAKE GP
CAMSHAFT GP
ENGINE BRAKE GP
AIR COMPRESSOR GP

TRUCK ENGINE 3406E TRUCK ENGINE 5EK
 3406E Truck Engine 5EK01821-UP SEBP2392 3406E 5EK   (1993)

BASIC ENGINE

VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
110-9528 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
122-1248 BASE GP-VALVE COVER & INJ HARN
COVER GP-VALVE MECHANISM
111-0413 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
111-0413 COVER GP-VALVE MECHANISM
COVER GP-VALVE MECHANISM
112-4576 COVER GP-VALVE MECHANISM
 

#SEBP23924300
 

122-1248: BASE GP-VALVE COVER & INJ HARN

122-1248 BASE GP-VALVE COVER & INJ HARN
S/N 5EK16784-99999; 6TS1-UP
ALSO AN ATTACHMENT
i00517612 SEBP2392
1221248 BASE GP-VALVE COVER & INJ HARN Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8H-3127 [6] BOLT (1/4-20X0.75-IN)  
2. 4F-7957 [2] BOLT (1/4-20X0.875-IN)  
3. 5P-0537 [8] WASHER-HARD (7.2X14.5X2-MM THK)  
4. 7E-6508 [6] CAP AS (UNIT INJECTOR)  
5. 122-1486 [1] HARNESS AS-WIRING (ELECTRONIC UNIT INJECTOR)  
  8L-8413 [6] STRAP-CABLE (WHITE)  
  103-8134 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
6. 100-5218 [3] CLIP  
7. 100-5219 [3] CLIP  
8. 177-4152 [1] BASE-VALVE MECHANISM COVER  
9. 9L-8925 [14] BOLT (5/16-18X1.25-IN)  
10. 5P-5678 D SEAL (2.9-M)  
11. 122-1472 [1] BOLT (5/16-18X2.36-IN)  
12. 6V-0128 [1] SEAL-CONNECTOR  
13. 123-3202 [2] STRAP-CABLE  
  D   ORDER BY THE METER
 

#SEBP23924301
 

101-3085: BELT TIGHTENER GP

101-3085 BELT TIGHTENER GP
S/N 5EK1821-99999
VEE GROOVE PULLEY (2 PULLEY GROOVES FOR 1/2 INCH AND 11/16 INCH BELTS)
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT
i00462962 SEBP2392
1013085 BELT TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2733 [1] BRACKET  
2. 7W-9811 [1] BRACKET AS (BELT TIGHTENER)  
  4N-0684 [1] DOWEL  
3. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
  2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
  5M-1932 [1] STUD-TAPERLOCK (1/2-13X2.17-IN)  
4. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
  2D-5238 [1] STUD-TAPERLOCK (5/8-11X2.5-IN)  
  2S-7593 [1] WASHER-HARD (17X35X5-MM THK)  
5. 1A-5964 [3] BOLT (3/8-16X4.5-IN)  
6. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
7. 0S-1594 [6] BOLT (3/8-16X1-IN)  
  5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
8. 5S-2106 [1] SEAL-LIP TYPE  
9. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
10. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(BELT TIGHTENER)  
11. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
12. 1H-5403 [2] BOLT (5/16-24X2-IN)  
13. 8T-6757 [1] PLUG-PIPE  
14. 1W-6134 [1] COVER  
15. 5F-3092 [1] SEAL-O-RING  
16. 9N-1003 [1] PULLEY-IDLER (4-GROOVE)  
17. 8H-9789 [2] BALL BEARING  
18. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
 

#SEBP23924302
 

108-4515: BELT TIGHTENER GP

108-4515 BELT TIGHTENER GP
S/N 5EK1821-99999
VEE GROOVE PULLEY (2 GROOVES FOR 1/2 INCH BELT)
FOR USE WITH ALTERNATOR MOUNTING
AN ATTACHMENT
i00483213 SEBP2392
1084515 BELT TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-2733 [1] BRACKET  
2. 7W-9811 [1] BRACKET AS (BELT TIGHTENER)  
  4N-0684 [1] DOWEL  
3. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
4. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
5. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
6. 0L-1351 [1] BOLT (3/8-16X0.875-IN)  
7. 0S-1594 [4] BOLT (3/8-16X1-IN)  
8. 5S-2106 [1] SEAL-LIP TYPE  
9. 9N-1012 [1] SPACER-BEARING (1.438X1.75X1-IN THK)  
10. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)(BELT TIGHTENER)  
11. 5S-7264 [1] WASHER-RETAINING (0.219-IN THK)  
12. 1H-5403 [2] BOLT (5/16-24X2-IN)  
13. 8T-6757 [1] PLUG-PIPE  
14. 1W-6134 [1] COVER  
15. 5F-3092 [1] SEAL-O-RING  
16. 9N-1003 [1] PULLEY-IDLER (4-GROOVE)  
17. 8H-9789 [2] BALL BEARING  
18. 5S-9062 [1] SPACER (35.032X50.8X15.88-MM THK)  
19. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
20. 5M-1932 [1] STUD-TAPERLOCK (1/2-13X2.17-IN)  
21. 2D-5238 [1] STUD-TAPERLOCK (5/8-11X2.5-IN)  
22. 2S-7593 [1] WASHER-HARD (17X35X5-MM THK)  
23. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP23924303
 

126-8550: BELT TIGHTENER GP

126-8550 BELT TIGHTENER GP
S/N 5EK9049-99999; 6TS1-99999
CANNOT BE USED WITH ALTERNATOR MOUNTING
ALSO AN ATTACHMENT
i00515475 SEBP2392
1268550 BELT TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [3] BOLT (3/8-16X1-IN)  
2. 1A-5964 [3] BOLT (3/8-16X4.5-IN)  
3. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
4. 126-8551 [1] BRACKET AS  
  4N-0684 [1] DOWEL  
5. 2D-5238 [1] STUD-TAPERLOCK (5/8-11X2.5-IN)  
6. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
7. 2S-7593 [1] WASHER-HARD (17X35X5-MM THK)  
8. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
9. 5M-1932 [1] STUD-TAPERLOCK (1/2-13X2.17-IN)  
10. 126-8556 [1] PLATE  
11. 7C-2733 [1] BRACKET  
12. 7X-3328 [1] BOLT-LOCKING (1/2-13X1-IN)  
13. 126-8557 [1] PULLEY (2-GROOVE)  
14. 9F-3212 [2] BALL BEARING (35-MM ID)  
15. 2H-5549 [1] RING-RETAINING  
 

#SEBP23924304
 

131-2621: BELT TIGHTENER GP

131-2621 BELT TIGHTENER GP
S/N 5EK67193-99999; 6TS1-27811
FOR USE WITH ALTERNATOR MOUNTING
ALSO AN ATTACHMENT
i00508284 SEBP2392
1312621 BELT TIGHTENER GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [1] BOLT (3/8-16X1-IN)  
2. 1A-5964 [2] BOLT (3/8-16X4.5-IN)  
3. 1F-7958 [1] NUT-FULL (1/2-13-THD)  
4. 126-8551 [1] BRACKET AS  
  4N-0684 [1] DOWEL  
5. 2D-5238 [1] STUD-TAPERLOCK (5/8-11X2.5-IN)  
6. 2M-0849 [1] WASHER-HARD (13.5X25.5X5-MM THK)  
7. 2S-7593 [1] WASHER-HARD (17X35X5-MM THK)  
8. 4K-0367 [1] NUT-FULL (5/8-11-THD)  
9. 5M-1932 [1] STUD-TAPERLOCK (1/2-13X2.17-IN)  
10. 126-8556 [1] PLATE  
11. 7C-2733 [1] BRACKET  
12. 7X-3328 [1] BOLT-LOCKING (1/2-13X1-IN)  
13. 126-8557 [1] PULLEY (2-GROOVE)  
14. 9F-3212 [2] BALL BEARING (35-MM ID)  
15. 2H-5549 [1] RING-RETAINING  
 

#SEBP23924305
 

9N-1852: BRAKESAVER GP

9N-1852 BRAKESAVER GP
S/N 5EK1821-99999; 6TS1-99999
ALSO AN ATTACHMENT
i00436360 SEBP2392
9N1852 BRAKESAVER GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7C-1703 [1] STATOR-BRAKESAVER  
2. 8T-6757 [6] PLUG-PIPE  
3. 6V-4365 [6] SEAL-O-RING  
4. 1W-4204 [2] RING-SEAL  
5. 9N-6491 [1] HOUSING AS (BRAKESAVER)  
6. 9N-0034 [2] ORIFICE  
7. 2W-4838 [2] SLEEVE  
8. 7W-8983 [2] RING-RETAINING  
9. 4W-8133 [1] SEAL GP (BRAKESAVER)  
10. 8T-8883 [1] SEAL-O-RING  
11. 0S-1591 [22] BOLT (3/8-16X1.5-IN)  
  5M-2894 [22] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 9N-6574 [1] ROTOR AS  
  9N-0037 [2] CARRIER-SEAL  
13. 9N-6132 [1] PLATE AS-GEAR  
14. 4N-2514 [1] GEAR (113-TEETH)  
15. 7F-8817 [2] DOWEL  
16. 6V-3907 [2] SEAL-O-RING  
17. 2D-4534 [4] BOLT-SOCKET HEAD (3/8-16X1-IN)  
18. 4W-8134 [1] SEAL GP-BRAKESAVER  
 

#SEBP23924306
 

108-5901: CAMSHAFT GP

108-5901 CAMSHAFT GP
S/N 5EK1821-99999; 6TS1-99999
i00484436 SEBP2392
1085901 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-9089 [1] COVER  
2. 119-0036 [3] SCREW-FLAT HEAD (5/16-18X0.875-IN)  
3. 131-0510 [1] CAMSHAFT  
4. 6V-1197 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23924307
 

6I-1543: CAMSHAFT GP

6I-1543 CAMSHAFT GP
i00392431 SEBP2392
6I1543 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 102-9089 [1] COVER  
2. 119-0036 [3] SCREW-FLAT HEAD (5/16-18X0.875-IN)  
3. 187-9381 [1] CAMSHAFT  
4. 6V-1197 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23924308
 

9N-0572: CONTROL GP-BRAKESAVER

9N-0572 CONTROL GP-BRAKESAVER
S/N 5EK57939-59974
AUTOMATIC
ALSO AN ATTACHMENT
i00435855 SEBP2392
9N0572 CONTROL GP-BRAKESAVER Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1S-3998 Y [1] VALVE AS-RETARDER (OPERATOR CONTROL)  
2. 278-8338 Y [1] GAUGE GP-MANIFOLD PRESSURE  
3. 9L-5567 [1] INDICATOR (BRAKESAVER OIL TEMPERATURE)  
4. 6H-6699 [1] ADAPTER (HEAT INDICATOR)  
5. 5D-3056 Y [1] VALVE GP-CHECK (BRAKESAVER AIR SUPPLY)  
6. 9L-5483 [1] VALVE-SOLENOID (BRAKESAVER AIR SUPPLY)  
7. 9X-4394 [1] SWITCH AS-LIMIT (BRAKESAVER SUPPLY CLUTCH)  
8. 9L-5570 [1] VALVE-REGULATOR (PRESSURE REDUCING AIR SUPPLY)  
9. 8D-2676 [1] SWITCH AS-TOGGLE (SINGLE POLE)(BRAKESAVER ON/OFF)  
10. 9L-5539 [1] PLATE-SWITCH (BRAKESAVER CONTROL SELECTOR)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23924309
 

115-2963: COVER GP-AIR COMPRESSOR

115-2963 COVER GP-AIR COMPRESSOR
S/N 5EK1821-99999
AN ATTACHMENT
i00490987 SEBP2392
1152963 COVER GP-AIR COMPRESSOR Parts scheme
  For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2488 [1] COVER  
2. 1F-7958 [2] NUT-FULL (1/2-13-THD)  
3. 5P-8245 [3] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 0S-1587 [1] BOLT (1/2-13X1.75-IN)  
5. 100-7432 [1] GASKET  
 

Information:

Truck Engine News
New 8T2998 Lubricant Available
1986/02/01
Valve Lash Adjustment Interval Is Changed
1986/07/01
Black Painted Valve Covers Available{1107}
1994/12/01
Finding Top Dead Center (TDC) For Setting Valve Lash{0374}
1995/06/01
New Jake Brake Factory Setting{1119}
1995/07/01
New Indication Of Upper End Check{1102,1290}
1995/08/01
New Valve Cover Group Includes "Low Profile" Breather{1107,1317}
1995/09/01
New Jake Brake Factory Setting{1119}
1995/09/01
Improvements To Camshafts, Unit Injector Rocker Arms, And Valve Rocker Arms{1123,1210}
1996/03/27
New Torque Specification For Injector Rocker Arm Adjustment Lock Nut{1123}
1996/10/01
Jake Brake Settings For The 3406E Truck Engines {1119}
1999/05/01
A New Valve Cover and New Valve Cover Fasteners are Available {1107}
2004/04/01
A Improved Guide Spring is Now Used {1108}
2005/11/01
Valve Bridges are Included with Cylinder Heads {1102, 1123}
2010/05/31
A New Screw Is Available for the Rocker Arm Assemblies of Some Truck Engines {1123}
2010/03/09
Cat<SUP>&reg;</SUP> Reman Now Offers Valve Lifter Assemblies for Certain Truck Engines {1209}
2014/09/05
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
Engine News
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/18
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
5P7333 Tool Group Available For The Repair Of Loose Bridge Dowels On Cylinder Heads
1977/06/29
Tolerance Added To Valve Clearance Specifications
1978/01/18
Use Again Specifications For Valve Springs Are Changed
1978/03/01
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Use Of 6V9050 Exhaust Stud Removal Group{1100}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Valve Mechanism Cover
3406E Truck Engine
Valve Mechanism
3406E Truck Engine
Electronic Unit Injector Rocker Arm
3406E Truck Engine
Rocker Shaft
3406E Truck Engine
Service Letter-China
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
3406E Engine
Valve Mechanism Cover Base - Remove and Install
3406E Engine
Compression Brake - Remove - If Equipped
3406E Engine
Compression Brake - Install - If Equipped
3406E Engine
Rocker Arm and Shaft - Install
3406E Engine
Rocker Arm and Shaft - Remove
3406E Engine
Rocker Arm - Assemble
3406E Engine
Rocker Arm - Disassemble
3406E Engine
Service Magazine
Engine Valve Stem &quot;Use Again&quot; Specifications{0653,1105}
1983/02/28
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1983/10/17
Remanufactured Cylinder Head Groups{1100,1101,7554}
1984/11/19
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Maximum Wear Limits Established For Camshaft Roller Followers{1209}
1985/09/30
Valve Lash Adjustment Interval Is Changed {1105}
1986/07/07
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500&quot; (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
Tolerance Added To Valve Clearance Specifications{1105,0374}
1978/01/16
Valve Damage Can Be Caused By Short Intervals Of Engine Operation In Very Cold Temperatures{1105,1208}
1978/01/30
Use Again Specifications For Valve Springs Are Changed{1108}
1978/03/06
A New Method To Clean And Polish Engine Valve Stems{0674,1105}
1979/05/28
Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27
Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17
New Exhaust Valves Are Used In Caterpillar Remanufactured Cylinder Heads{1105,1101}
1990/10/08
Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07
Identification Of Intake And Exhaust Valves That May Be Used In Remanufactured Direct Injected 3400 Cylinder Heads{1105}
1994/04/04
124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}

Caterpillar Parts SIS Catalog 3406E :

BASE GP-VALVE COVER & INJ HARN
110-9528 BASE GP-VALVE COVER & INJ HARN
AIR COMPRESSOR GP
6I-3914 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3909 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3909 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3908 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3906 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3906 AIR COMPRESSOR GP
AIR COMPRESSOR GP
6I-3905 AIR COMPRESSOR GP
BELT TIGHTENER GP
101-3085 BELT TIGHTENER GP
BELT TIGHTENER GP
108-4515 BELT TIGHTENER GP
BELT TIGHTENER GP
126-8550 BELT TIGHTENER GP
BELT TIGHTENER GP
131-2621 BELT TIGHTENER GP
BRAKESAVER GP
9N-1852 BRAKESAVER GP
CAMSHAFT GP
108-5901 CAMSHAFT GP
CAMSHAFT GP
6I-1543 CAMSHAFT GP
CONTROL GP-BRAKESAVER
9N-0572 CONTROL GP-BRAKESAVER

Truck sale:

2000 CAT 3406E
USD $8,785 
2000 CAT 3406E

Transgear Truck Supplies
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.