BASIC ENGINE
VALVE MECHANISM GPCRANKSHAFT GP
CYLINDER BLOCK GP
BASIC ENGINE
VALVE MECHANISM GP#SEBP23924360
6I-4683: COVER GP-VALVE MECHANISM
6I-4683 COVER GP-VALVE MECHANISM
S/N 5EK7441-99999; 6TS1-99999
MID MOUNTED OIL FILL, FRONT MOUNTED BREATHER
ALSO AN ATTACHMENT
S/N 5EK7441-99999; 6TS1-99999
MID MOUNTED OIL FILL, FRONT MOUNTED BREATHER
ALSO AN ATTACHMENT
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 102-8633 | [1] | COVER-VALVE MECHANISM | |
2. | 4F-7390 | [1] | SEAL-O-RING | |
3. | 9L-8925 | [18] | BOLT (5/16-18X1.25-IN) | |
4. | 5P-5678 BD | SEAL | ||
5. | 113-4885 | [1] | CAP AS-OIL FILLER (ENGINE) | |
6. | 103-1271 | [2] | COVER AS-VALVE | |
(EACH INCLUDES) | ||||
7. | 272-2583 | [1] | SEAL-O-RING | |
8. | 7C-6514 | [1] | ADAPTER | |
9. | 9Y-2988 | [1] | BREATHER AS (CRANKCASE) | |
10. | 2N-8109 | [1] | CLAMP | |
B | USE AS REQUIRED | |||
D | ORDER BY THE METER |
#SEBP23924361
6I-4684: COVER GP-VALVE MECHANISM
6I-4684 COVER GP-VALVE MECHANISM
S/N 5EK1821-99999; 6TS1-27811
FOR USE WITH FRONT MOUNTED FUMES DISPOSAL GP
ALSO AN ATTACHMENT
S/N 5EK1821-99999; 6TS1-27811
FOR USE WITH FRONT MOUNTED FUMES DISPOSAL GP
ALSO AN ATTACHMENT
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SIS#SEBP23924362
6I-1001: CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
S/N 5EK1821-14891
S/N 5EK1821-14891
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-1734 | [1] | SEAL GP-CRANKSHAFT (REAR) | |
2. | 2W-1733 | [1] | SEAL GP-CRANKSHAFT (FRONT) | |
3. | 4W-5492 | [7] | BEARING-MAIN (STANDARD) | |
4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
4. | 7E-9262 | [2] | PLATE-THRUST | |
5. | 6I-1453 | [1] | CRANKSHAFT AS | |
5A. | 1W-9302 | [1] | GEAR-CRANKSHAFT (80-TEETH) | |
7S-5005 | [1] | DOWEL | ||
5B. | 4N-0684 | [1] | DOWEL | |
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP23924363
6I-1001: CRANKSHAFT GP
6I-1001 CRANKSHAFT GP
S/N 5EK3568-99999; 6TS1-UP
S/N 5EK3568-99999; 6TS1-UP
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 253-1752 J | [2] | PLATE-THRUST | |
2. | 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | |
3. | 211-0592 | [7] | BEARING-MAIN (STANDARD) | |
4W-5698 AB | BEARING-MAIN (0.63-MM US) | |||
4W-5699 AB | BEARING-MAIN (1.27-MM US) | |||
4W-5700 AB | BEARING-MAIN (0.63-MM OS) | |||
4W-5701 AB | BEARING-MAIN (0.63-MM OS, 0.63-MM US) | |||
4. | 6I-1453 | [1] | CRANKSHAFT AS | |
4A. | 1W-9302 | [1] | GEAR-CRANKSHAFT (80-TEETH) | |
4B. | 4N-0684 | [1] | DOWEL | |
4C. | 7S-5005 | [1] | DOWEL | |
AVAILABLE REPAIR KIT(S): | ||||
243-6718 AJ | [1] | KIT-CRANKSHAFT BEARING | ||
A | NOT PART OF THIS GROUP | |||
B | USE AS REQUIRED | |||
J | KIT MARKED J SERVICES PART(S) MARKED J | |||
R | REMANUFACTURED PART MAY BE AVAILABLE |
#SEBP23924364
108-3919: CYLINDER BLOCK AS
108-3919 CYLINDER BLOCK AS
S/N 5EK1821-90204
PART OF 107-2232, 112-9058 CYLINDER BLOCK GP
S/N 5EK1821-90204
PART OF 107-2232, 112-9058 CYLINDER BLOCK GP
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SIS#SEBP23924365
125-0835: CYLINDER BLOCK AS
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SIS#SEBP23924366
137-2671: CYLINDER BLOCK AS
137-2671 CYLINDER BLOCK AS
S/N 5EK90205-99999; 6TS1-25054
PART OF 107-2232, 112-9058, 147-2294, 147-2295 CYLINDER BLOCK GP
S/N 5EK90205-99999; 6TS1-25054
PART OF 107-2232, 112-9058, 147-2294, 147-2295 CYLINDER BLOCK GP
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2W-6000 | [6] | LINER-CYLINDER BLOCK | |
2. | 9L-5854 | [6] | BAND-FILLER (130.2-MM ID) | |
3. | 110-2220 | [6] | SEAL-LINER | |
4. | 3P-1323 | [14] | BOLT-BEARING CAP (7/8-14X7.75-IN) | |
5. | 9H-1031 | [14] | WASHER-HARD (24X41.5X6-MM THK) | |
6. | 4N-5857 | [7] | CAP-CRANKSHAFT BEARING | |
7. | 142-7072 | [6] | SEAL-LINER | |
8. | 142-6217 | [6] | SEAL-O-RING |
#SEBP23924367
107-2232: CYLINDER BLOCK GP
107-2232 CYLINDER BLOCK GP
S/N 5EK1821-72479
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
S/N 5EK1821-72479
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 100-3851 | [6] | JET AS-PISTON COOLING | |
2. | 108-3919 Y | [1] | CYLINDER BLOCK AS | |
3. | 5N-2126 | [1] | CONNECTOR (THERMOCOUPLE) | |
4. | 6V-5048 | [1] | SEAL-O-RING | |
5. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
6. | 9X-7378 | [1] | SEAL-O-RING | |
7. | 100-7399 | [1] | PLUG | |
8. | 3E-6747 | [1] | SEAL-O-RING | |
9. | 1S-9540 | [1] | DOWEL | |
10. | 5P-0840 | [1] | SEAL-O-RING | |
11. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
12. | 6I-1055 | [1] | DOWEL | |
13. | 2M-6471 | [1] | PLUG-CUP | |
14. | 4N-0683 | [4] | DOWEL | |
15. | 4N-1650 | [1] | DOWEL | |
16. | 6I-4421 | [1] | PLATE-SPACER | |
17. | 6I-4422 | [1] | GASKET-PLATE | |
18. | 8S-9094 | [1] | PLUG-ORIFICE | |
19. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
20. | 114-4427 | [1] | SEAL-O-RING | |
21. | 8T-6767 | [5] | PLUG-PIPE (3/8-18-THD) | |
22. | 7E-6479 | [6] | BOLT-SPECIAL (OIL JET) | |
23. | 3E-7570 | [1] | SENSOR GP-PRESSURE (OIL) | |
24. | 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
(INCLUDES PLUG AS & WEDGE) | ||||
102-8813 | [1] | SEAL | ||
25. | 3E-3368 | [1] | WEDGE-PLUG LOCK (3-PIN) | |
26. | 186-3736 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
27. | 9X-1813 BE | SLEEVE | ||
28. | 3B-7722 | [1] | BUSHING-PIPE | |
7M-7456 B | COMPOUND-BEARING MOUNT (50-ML TUBE) | |||
B | USE AS REQUIRED | |||
E | ORDER BY THE CENTIMETER | |||
Y | SEPARATE ILLUSTRATION |
#SEBP23924368
107-2232: CYLINDER BLOCK GP
107-2232 CYLINDER BLOCK GP
S/N 5EK72480-90204
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
S/N 5EK72480-90204
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 100-3851 | [6] | JET AS-PISTON COOLING | |
2. | 108-3919 CY | [1] | CYLINDER BLOCK AS | |
3. | 5N-2126 | [1] | CONNECTOR (THERMOCOUPLE) | |
4. | 6V-5048 | [1] | SEAL-O-RING | |
5. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
6. | 9X-7378 | [1] | SEAL-O-RING | |
7. | 100-7399 | [1] | PLUG | |
8. | 3E-6747 | [1] | SEAL-O-RING | |
9. | 1S-9540 | [1] | DOWEL | |
10. | 5P-0840 | [1] | SEAL-O-RING | |
11. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
12. | 6I-1055 | [1] | DOWEL | |
13. | 2M-6471 | [1] | PLUG-CUP | |
14. | 4N-0683 | [4] | DOWEL | |
15. | 4N-1650 | [1] | DOWEL | |
16. | 6I-4421 | [1] | PLATE-SPACER | |
17. | 135-7413 | [1] | GASKET-SPACER | |
18. | 8S-9094 | [1] | PLUG-ORIFICE | |
19. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
20. | 114-4427 | [1] | SEAL-O-RING | |
21. | 8T-6767 | [5] | PLUG-PIPE (3/8-18-THD) | |
22. | 7E-6479 | [6] | BOLT-SPECIAL (OIL JET) | |
23. | 111-2350 C | [1] | SENSOR GP-PRESSURE (OIL) | |
24. | 102-8808 | [1] | KIT-CONNECTING PLUG (3-PIN) | |
102-8813 | [1] | SEAL | ||
25. | 3E-3368 | [1] | WEDGE-PLUG LOCK (3-PIN) | |
26. | 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
27. | 9X-1813 BE | SLEEVE | ||
28. | 3B-7722 | [1] | BUSHING-PIPE | |
7M-7456 B | COMPOUND-BEARING MOUNT (50-ML TUBE) | |||
B | USE AS REQUIRED | |||
C | CHANGE FROM PREVIOUS TYPE | |||
E | ORDER BY THE CENTIMETER | |||
Y | SEPARATE ILLUSTRATION |
#SEBP23924369
107-2232: CYLINDER BLOCK GP
107-2232 CYLINDER BLOCK GP
S/N 5EK16064-99999; 6TS1-25054
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
S/N 5EK16064-99999; 6TS1-25054
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@125-0512@@@@@, @@@@@133-3485@@@@@
Parts for your 3406E TRUCK ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 145-6860 | [6] | JET AS-PISTON COOLING | |
2. | 137-2671 CY | [1] | CYLINDER BLOCK AS | |
3. | 1S-9540 | [1] | DOWEL | |
4. | 5P-0840 | [1] | SEAL-O-RING | |
5. | 7W-6492 | [6] | PLUG-PIPE (1/2-14-THD) | |
6. | 6I-1055 | [1] | DOWEL | |
7. | 4N-0683 | [4] | DOWEL | |
8. | 4N-1650 | [1] | DOWEL | |
9. | 6I-4421 | [1] | PLATE-SPACER | |
10. | 133-9827 | [1] | GASKET-PLATE | |
11. | 8S-9094 | [1] | PLUG-ORIFICE | |
12. | 9S-4190 | [1] | PLUG-O-RING (7/8-14-THD) | |
13. | 114-4427 | [1] | SEAL-O-RING | |
14. | 7X-7732 | [5] | PLUG-PIPE | |
15. | 7E-6479 | [6] | BOLT-SPECIAL (OIL JET) | |
16. | 111-2350 C | [1] | SENSOR GP-PRESSURE (OIL) | |
INCLUDES PLUG AS & WEDGE | ||||
17. | 3B-7722 | [1] | BUSHING-PIPE | |
18. | 5N-2126 | [1] | CONNECTOR (THERMOCOUPLE) | |
19. | 6V-5048 | [1] | SEAL-O-RING | |
20. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
21. | 9X-7378 | [1] | SEAL-O-RING | |
22. | 100-7399 C | [2] | PLUG | |
23. | 3E-6747 C | [2] | SEAL-O-RING | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
Information:
BASIC ENGINE
VALVE MECHANISM GP
Truck Engine News
Cat<SUP>®</SUP> Reman Now Offers Valve Lifter Assemblies for Certain Truck Engines {1209}
2014/09/05
2014/09/05
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E and C15 Truck Engines {1123}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
Engine News
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures
1977/05/25
1977/05/25
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Special Instruction
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Replacement For The 2M4314 Fuel Pump Bonnet Retaining Bushing{1250}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Use Of The 1P7451 Valve Guide Honing Group{0673, 1104}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Use Of 6V4805 Valve Seat Insert Puller Group{0703}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Valve Bridges are Included with Cylinder Heads{1102, 1123}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Service Letter-NACD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
Service Letter-APD
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
164-5950 Valve Adjusting Screws Need To Be Removed From Dealer Parts Stock
Disassembly and Assembly
Service Magazine
Correct Installation Of Valve Lifters On The Camshaft Is Very Important To Prevent Failures{1209}
1977/05/16
1977/05/16
Tools Now Available To Ream And/Or Hone 0.500" (12.70 mm) Diameter Valve Guides{0663}
1977/08/22
1977/08/22
124-2946 Lifting Bracket Assembly Makes Rocker Arm Removal And Installation Easier{1123,0701}
1996/12/09
1996/12/09
Cat<SUP>®</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}