4P-5401 CYLINDER BLOCK GP S/N 5EK3568-99999 FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@111-7170@@@@@, @@@@@125-0512@@@@@ 3406E

BASIC ENGINE

CYLINDER BLOCK GP

0. 4P-5401 CYLINDER B

CYLINDER HEAD GP

1. 112-3572 CYLINDER H
2. 142-7339 CYLINDER H
3. 161-6190 CYLINDER H
4. 115-2322 CYLINDER H
5. 115-2323 CYLINDER H
6. 132-9976 CYLINDER H
7. 132-9976 CYLINDER H
8. 142-7341 CYLINDER H
9. 160-4346 CYLINDER H
0. INFORMATION

TRUCK ENGINE 3406E TRUCK ENGINE 5EK
3406E Truck Engine 5EK01821-UP SEBP2392 3406E 5EK (1993)

BASIC ENGINE

CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP

0R-8913 CYLINDER PACK GP

109-1222 PLUG GP-CYLINDER BLOCK

#SEBP23924390

4P-5401: CYLINDER BLOCK GP

CYLINDER BLOCK GP

4P-5401 CYLINDER BLOCK GP
S/N 5EK3568-99999
FIELD REPLACEMENT ORDER @@@@@108-2111@@@@@, @@@@@111-7170@@@@@, @@@@@125-0512@@@@@

i00384042 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7W-4990	[6]	JET AS-PISTON COOLING
2.	108-3919	[1]	CYLINDER BLOCK AS
3.	2W-6000	[6]	LINER-CYLINDER BLOCK
4.	110-2220	[18]	SEAL-LINER
5.	3P-1323	[14]	BOLT-BEARING CAP (7/8-14X7.75-IN)
6.	4N-5857	[7]	CAP-CRANKSHAFT BEARING
7.	9H-1031	[14]	WASHER-HARD (24X41.5X6-MM THK)
8.	9L-5854	[6]	BAND-FILLER (130.2-MM ID)
9.	1S-9540	[1]	DOWEL
10.	5P-0840	[1]	SEAL-O-RING
11.	7W-6492	[6]	PLUG-PIPE (1/2-14-THD)
12.	6I-1055	[1]	DOWEL
13.	2M-6471	[1]	PLUG-CUP
14.	4N-0683	[4]	DOWEL
15.	4N-1650	[1]	DOWEL
16.	6I-4421	[1]	PLATE-SPACER
17.	135-7413 C	[1]	GASKET-SPACER
18.	8S-9094	[1]	PLUG-ORIFICE
19.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
20.	114-4427	[1]	SEAL-O-RING
21.	8T-6767	[5]	PLUG-PIPE (3/8-18-THD)
22.	7E-6479	[6]	BOLT-SPECIAL (OIL JET)
23.	111-2350 C	[1]	SENSOR GP-PRESSURE
24.	3E-3367	[1]	PLUG AS-CONNECTOR
	102-8808	[1]	KIT-CONNECTING PLUG (3-PIN)
	102-8813	[1]	SEAL
25.	3E-3368	[1]	WEDGE-PLUG LOCK (3-PIN)
26.	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
27.	9X-1813 BE		SLEEVE
28.	3B-7722	[1]	BUSHING-PIPE
29.	5N-2126	[1]	CONNECTOR (THERMOCOUPLE)
30.	6V-5048	[1]	SEAL-O-RING
31.	9S-4182	[1]	PLUG (7/16-20-THD)
32.	9X-7378	[1]	SEAL-O-RING
33.	100-7399	[1]	PLUG
34.	3E-6747	[1]	SEAL-O-RING
	7M-7456 B		COMPOUND-BEARING MOUNT (50-ML TUBE)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER

#SEBP23924391

112-3572: CYLINDER HEAD AS

CYLINDER HEAD AS

112-3572 CYLINDER HEAD AS
S/N 5EK4409-99999
PART OF 115-2323 CYLINDER HEAD GP

i00489661 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	4P-5053	[7]	BEARING-CAMSHAFT
2.	8T-6757	[3]	PLUG-PIPE
3.	108-5912	[12]	INSERT-VALVE SEAT (INLET)
4.	122-7375	[24]	GUIDE-VALVE
5.	1W-5283	[12]	INSERT-VALVE SEAT (EXHAUST)
6.	115-2324 Y	[6]	SLEEVE GP-INJECTOR
7.	3B-0645	[20]	PLUG-CUP
8.	3B-0623	[17]	PLUG-CUP
	Y		SEPARATE ILLUSTRATION

#SEBP23924392

142-7339: CYLINDER HEAD AS

CYLINDER HEAD AS

142-7339 CYLINDER HEAD AS
S/N 6TS23700-99999
PART OF 142-7341 CYLINDER HEAD GP

i00503777 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
2.	8T-6757	[3]	PLUG-PIPE
3.	152-8379	[12]	INSERT-VALVE SEAT (INLET)
4.	152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)
	167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)(STANDARD)
	170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)(STANDARD)
5.	4P-5053	[7]	BEARING-CAMSHAFT
	150-4793 AB		BEARING-CAMSHAFT (0.25-MM OS)
	AB		BEARING-CAMSHAFT (0.762-MM OS)
6.	115-2324 Y	[6]	SLEEVE GP-INJECTOR
7.	3B-0645	[20]	PLUG-CUP
8.	3B-0623	[17]	PLUG-CUP
9.	122-7375	[24]	GUIDE-VALVE
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)(STANDARD)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)(STANDARD)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP23924393

161-6190: CYLINDER HEAD AS

CYLINDER HEAD AS

161-6190 CYLINDER HEAD AS
S/N 5EK1821-99999; 6TS1-99999
PART OF 161-6191 CYLINDER HEAD GP

i00862753 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	8T-6757	[3]	PLUG-PIPE
3.	175-3617	[12]	INSERT-VALVE SEAT (INLET)
4.	152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)(EXHAUST)
	170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)(EXHAUST)
5.	216-5582	[7]	BUSHING
	217-0751 AB		BUSHING (0.25-MM OS)
6.	115-2324 Y	[6]	SLEEVE GP-INJECTOR
7.	3B-0645	[20]	PLUG-CUP
8.	3B-0623	[17]	PLUG-CUP
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP23924394

115-2322: CYLINDER HEAD GP

CYLINDER HEAD GP

115-2322 CYLINDER HEAD GP
S/N 5EK4409-99999

i00490612 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-8618	[1]	SENSOR GP-TEMPERATURE
			(INTAKE MANIFOLD AIR TEMPERATURE SENSOR)
2.	3E-6379	[1]	SENSOR GP-PRESSURE (AIR)
3.	008-6817	[1]	ELBOW
4.	6I-4420	[1]	GASKET-CYLINDER HEAD
5.	115-2323 Y	[1]	CYLINDER HEAD GP
6.	101-6706	[6]	SLEEVE-EXHAUST PORT
7.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	3E-6772	[24]	SEAL (WATER)
9.	5H-1504	[26]	WASHER-HARD (20X33.5X5-MM THK)
10.	100-5725	[1]	STUD (3/8-16X1.25-IN)
11.	6V-5048	[1]	SEAL-O-RING
12.	6V-5049	[4]	SEAL-O-RING
13.	124-1854	[10]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	2P-2506 AB		LUBRICANT-THREAD (ANTISEIZE COMPOUND)
14.	2B-0858	[2]	PLUG-PIPE
15.	8L-2786	[1]	SEAL-O-RING
16.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
17.	030-3978	[1]	CONNECTOR
18.	9S-8004	[3]	PLUG (9/16-18-THD)
19.	124-1855	[16]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
	2P-2506 AB		LUBRICANT-THREAD (ANTISEIZE COMPOUND)
20.	5P-0840	[1]	SEAL-O-RING
21.	9S-4183	[1]	PLUG (1-1/16-12-THD)
22.	3D-2824	[1]	SEAL-O-RING
23.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	Y		SEPARATE ILLUSTRATION

#SEBP23924395

115-2323: CYLINDER HEAD GP

CYLINDER HEAD GP

115-2323 CYLINDER HEAD GP
S/N 5EK4409-99999
PART OF 115-2322 CYLINDER HEAD GP

i00490617 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	112-3572 Y	[1]	CYLINDER HEAD AS
2.	6I-1390	[12]	VALVE-EXHAUST
3.	103-6304	[12]	VALVE-INLET
4.	6I-0928	[24]	WASHER-SPECIAL
5.	102-7665	[24]	SPRING-VALVE
6.	4P-4962	[24]	ROTOCOIL AS
7.	4P-4661	[48]	LOCK-VALVE
8.	102-6229	[24]	SEAL-VALVE STEM
	Y		SEPARATE ILLUSTRATION

#SEBP23924396

132-9976: CYLINDER HEAD GP

CYLINDER HEAD GP

132-9976 CYLINDER HEAD GP
S/N 6TS23700-UP
Type 1

i00499481 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-8618	[1]	SENSOR GP-TEMPERATURE (INLET AIR)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	112-4550 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	111-2351	[1]	SENSOR GP-PRESSURE (AIR BOOST)
	8T-8730	[3]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	9X-1386 E		SLEEVE (34-CM)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
			(INCLUDES PLUG AS & WEDGE)
3.	3E-2332	[1]	ELBOW
4.	153-9653	[1]	GASKET-CYLINDER HEAD
5.	142-7341 Y	[1]	CYLINDER HEAD GP
6.	101-6706	[6]	SLEEVE-EXHAUST PORT
7.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	3E-6772	[24]	SEAL (WATER)
9.	6I-4025	[16]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
9A.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
9B.	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
10.	100-5725	[1]	STUD (3/8-16X1.25-IN)
11.	6V-5048	[1]	SEAL-O-RING
12.	6V-5049	[5]	SEAL-O-RING
13.	106-5673	[10]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
13A.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
13B.	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
14.	8T-6762	[2]	PLUG-PIPE (1/2-14-THD)
15.	2P-8421	[1]	ADAPTER-O-RING
16.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
17.	8L-2786	[1]	SEAL-O-RING
18.	9S-8004	[3]	PLUG (9/16-18-THD)
19.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
20.	5P-0840	[1]	SEAL-O-RING
21.	9S-4191	[1]	PLUG (9/16-18-THD)
22.	3D-2824	[1]	SEAL-O-RING
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP23924397

132-9976: CYLINDER HEAD GP

CYLINDER HEAD GP

132-9976 CYLINDER HEAD GP
S/N 6TS23700-UP
Type 2

i00856772 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	107-8618	[1]	SENSOR GP-TEMPERATURE (INLET AIR)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	112-4550 E		SLEEVE (31CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
2.	161-9927 CY	[1]	SENSOR GP-PRESSURE (AIR BOOST)
3.	3E-2332	[1]	ELBOW
4.	153-9653	[1]	GASKET-CYLINDER HEAD
5.	160-4347 Y	[1]	CYLINDER HEAD GP
6.	188-7775	[6]	SLEEVE AS-EXHAUST
7.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	3E-6772	[24]	SEAL (WATER)
9.	6I-4025	[16]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
9A.	124-1855	[1]	BOLT-12 POINT HEAD (3/4-16X7.638-IN)
9B.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
10.	100-5725	[1]	STUD (3/8-16X1.25-IN)
11.	6V-5048	[1]	SEAL-O-RING
12.	6V-5049	[5]	SEAL-O-RING
13.	106-5673	[10]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
13A.	124-1854	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
13B.	5H-1504	[1]	WASHER-HARD (20X33.5X5-MM THK)
14.	8T-6762	[1]	PLUG-PIPE (1/2-14-THD)
15.	2P-8421	[1]	ADAPTER-O-RING
16.	8T-6763	[1]	PLUG-PIPE (1/4-18-THD)
17.	8L-2786	[1]	SEAL-O-RING
18.	9S-8004	[3]	PLUG (9/16-18-THD)
19.	8T-6765	[2]	PLUG-PIPE (1/4-18-THD)
20.	5P-0840	[1]	SEAL-O-RING
21.	9S-4191	[1]	PLUG (9/16-18-THD)
22.	6V-5050	[1]	SEAL-O-RING
23.	6V-3251	[1]	SEAL-O-RING
24.	9S-4190	[1]	PLUG-O-RING (7/8-14-THD)
25.	138-4611	[6]	GASKET-EXHAUST
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP23924398

142-7341: CYLINDER HEAD GP

CYLINDER HEAD GP

142-7341 CYLINDER HEAD GP
S/N 6TS23700-UP
PART OF 132-9976 CYLINDER HEAD GP

i00503779 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	142-7339 Y	[1]	CYLINDER HEAD AS
2.	152-8380	[12]	VALVE-INLET
3.	152-7585	[12]	VALVE-EXHAUST
4.	6I-0928	[24]	WASHER-SPECIAL
5.	102-7665	[24]	SPRING-VALVE
6.	4P-4962	[24]	ROTOCOIL AS
7.	4P-4661	[48]	LOCK-VALVE
8.	102-6229	[24]	SEAL-VALVE STEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP23924399

160-4346: CYLINDER HEAD GP

CYLINDER HEAD GP

160-4346 CYLINDER HEAD GP
S/N 6TS23700-99999
PART OF 160-4347 CYLINDER HEAD GP

i00861033 SEBP2392

For full view, you need register

Parts for your 3406E TRUCK ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	122-7375	[24]	GUIDE-VALVE (STANDARD)
	122-0447 AB		GUIDE-VALVE (0.51-MM OS)
	122-8612 AB		GUIDE-VALVE (0.13-MM OS)
2.	8T-6757	[3]	PLUG-PIPE
3.	175-3617	[12]	INSERT-VALVE SEAT (INLET)(STANDARD)
	167-0643 AB		INSERT-VALVE SEAT (0.76-MM OS, INLET)
	170-4738 AB		INSERT-VALVE SEAT (0.51-MM OS, INLET)
4.	152-7582	[12]	INSERT-VALVE SEAT (EXHAUST)(STANDARD)
	167-0642 AB		INSERT-VALVE SEAT (0.76-MM OS, EXHAUST)
	170-4737 AB		INSERT-VALVE SEAT (0.51-MM OS, EXHAUST)
5.	216-5582	[7]	BUSHING
	150-4793 AB		BEARING-CAMSHAFT (0.25-MM OS)
	AB		BEARING-CAMSHAFT (0.762-MM OS)
6.	227-4239	[6]	SLEEVE-INJECTOR
7.	3B-0645	[20]	PLUG-CUP
8.	3B-0623	[17]	PLUG-CUP
9.	166-2903	[6]	SEAL-O-RING
10.	166-2904	[6]	SEAL-O-RING
11.	9X-7430	[6]	SEAL-O-RING
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED

Information:

BASIC ENGINE

CYLINDER BLOCK GP

Truck Engine News

Inspection Marks On Bearings
1982/05/19

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip
1982/12/08

Use FT1711 Light Table For Cylinder Liner Inspection
1982/12/08

New Liner Seat Insert Available
1983/08/31

New Cylinder Liner Available
1986/02/01

Cylinder Pack Puller Groups Improved
1992/12/01

Flywheel Housing to Cylinder Block Joint Improvements{1157,1201}
1994/01/01

Be Sure Correct Piston Cooling Jets Are Installed{1331}
1994/11/01

New Service Repair Camshaft Idler Gear Shafts Available For Use With Cylinder Blocks With Damaged Pilot Bore{1237}
1995/08/01

New Material Used In O-Rings And Optional New Block Side Cover Replacement{1201}
1996/02/26

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/06/24

New Spacer Plate Gasket Helps Prevent Oil Leaks{1221}
1996/07/30

Use Two Piece Ferrous Articulated Pistons Instead Of Aluminum Pistons {1214,1331}
1996/09/01

Improved Plate Gasket Used In Cylinder Block Groups{1221}
1997/10/20

The Cylinder Liners Have a New Appearance {1216}
2005/03/01

Engine News

In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09

Modification To Holder To Machine Counterbore On Cylinder Block
1977/03/15

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster
1978/01/18

New 5P8709 Piston Tool Group For The Alignment Of Piston Cooling Jets
1978/05/03

Use New Main Bearings In Replacement Cylinder Blocks
1978/07/05

Change In Procedure To Check Main Bearing Clearance
1978/08/30

Special Instruction

Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}
Pressure Lubrication Procedure for Remanufactured Engines and Short Blocks{1000, 1200, 1020}

Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}
Use Of 5P8709 Tool Group For Alignment Of Piston Cooling Jets{1331}

Installation Of Crankshaft Seals And Wear Sleeves{1203}
Installation Of Crankshaft Seals And Wear Sleeves{1203}

Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}
Use Of 1P4000 Line Boring Tool Group{0672, 1201, 1203}

Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}
Installing Heli-Coil Inserts In Caterpillar Cylinder Heads{1117}

Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}
Pressure Lubrication Procedure For Remanufactured Engines And Short Blocks{1000, 1201}

Cylinder Block Cleaning Procedure{1201}
Cylinder Block Cleaning Procedure{1201}

Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}
Installation Of Short Blocks And Crankshafts{1202, 1204, 1206}

Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}
Using 5P4175 Boring Tool Group And 5P1618 Tool Arrangement{0672, 1200}

Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}
Installation Instructions For The 160-9874 Gasket Kit {1213, 7555}

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}

Service Letter-NACD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS
PRODUCT SUPPORT PROGRAM FOR REPAIRING OIL LEAKS AT THE SPACER PLATE ON CERTAIN 3406E ENGINES USED IN ON-HIGHWAY VEHICLE APPLICATIONS

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Australia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CFEL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-CSARL

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Americas

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Brazil

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Service Letter-Truck/Ag/Marine

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Technical Information Bulletin

Liner Flange Breakage
Liner Flange Breakage

Specifications

Cylinder Block
3406E Truck Engine

Main Bearing Journal
3406E Truck Engine

Cylinder Liner
3406E Truck Engine

Tool Operating Manual

9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}
9U7990 Counter Bore Tool Group for 3176, 3300 and 3400 Series Engines{1201}

362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}

Service Letter-China

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Service Letter-Asia

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Reuse And Salvage Guidelines

Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}

Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}

Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}

Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}

Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}

Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}

Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}

Service Letter-APD

New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock
New Piston Pin Retainers Need To Be Installed In Certain Cylinder Kits In Parts Stock

Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock
Certain OR2693 Cylinder Kits Need To Be Removed From Parts Stock

Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory
Remove All 3E6777 Seals And 5P8057 Kits From Dealer Inventory

Remove 0R4176 Cylinder Packs From Parts Stock
Remove 0R4176 Cylinder Packs From Parts Stock

Testing and Adjusting

Basic Block
3406E Truck Engines

Disassembly and Assembly

Bearing Clearance - Check
3406E Engine

Crankshaft Main Bearings - Remove
3406E Engine

Cylinder Liner - Remove
3406E Engine

Piston Cooling Jets - Remove and Install
3406E Engine

Camshaft Bearings - Remove
3406E Engine

Camshaft Bearings - Install
3406E Engine

Cylinder Liner - Install
3406E Engine

Crankshaft Main Bearings - Install
3406E Engine

Service Magazine

Use Of A Flex-Hone For Cylinder Liner Reconditioning{0664,0674,1216}
1981/12/21

Use New Special Instruction To Install 5P6595 Insert In Cylinder Liner Seats{1216,0621}
1982/05/03

Inspection Marks On Bearings{7551,1230,1226,1203,1219,1227}
1982/05/03

Service Information For Easier Use Of The 6V3100 Timing Indicator Group{0651,1250,1156,1157}
1982/10/11

Use FT1711 Light Table For Cylinder Liner Inspection {0652,1216}
1982/11/29

New 6V7059 Micrometer Measures Liner Top Flange And Valve Lip {0653,1216,1105}
1982/11/29

Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16

Reuse Of Engine Bearings{1230}
1983/05/16

New Liner Seat Insert Available{1217}
1983/08/15

Reuse Of Engine Bearings{1230,1219,1203}
1983/11/21

New Cylinder Block Groups Used{1201}
1984/10/01

Use Care When Handling Water Seals For Cylinder Head Spacer Plates{1115}
1985/07/15

New Cylinder Liner Available{1201}
1986/02/10

Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02

Bearing Failures On Engines Due To Lack Of Lubrication{1230,1219,1203,1202}
1986/09/08

New Indicator Instrument Group Available To Measure Crankcase Blowby And Radiator Air Velocity{0781,1200,1350}
1986/10/27

Additional Guidelines For Using The 8T2700 Blowby/Air Flow Indicator Group {0781,1200,1350}
1987/07/20

Mid-Life Bearing Maintenance Recommendations {1203}
1987/09/14

5P8665 Cylinder Liner Puller Makes Liner Removal Easier And Faster{0621,1216}
1978/01/09

Use New Main Bearings In Replacement Cylinder Blocks{1203,1201}
1978/06/12

New Information On Reusable Cylinder Liners{1216}
1978/06/19

Change In Procedure To Check Main Bearing Clearance{1203}
1978/08/28

New Centering Rings For Oversized Main Bearings{0665,1230}
1979/06/04

Why Engines Are Damaged By Fuel Sulfur{1104,1216,1280,1318,1215}
1979/08/27

Fuel Sulfur-Your Diesel's Silent Enemy{0375,1280}
1979/12/17

Improved Head Gasket Used; Summary Of Earlier Gaskets And Service Tips{1124,1216,1221}
1989/08/21

Cylinder Pack Puller Groups Improved {0705,1239}
1993/01/18

Damper Requirements For Remanufactured Short Blocks{1205}
1993/08/16

Caterpillar Parts SIS Catalog 3406E :

4P-5401 CYLINDER BLOCK GP

147-2295 CYLINDER BLOCK GP

147-2294 CYLINDER BLOCK GP

137-8472 CYLINDER BLOCK GP

137-8470 CYLINDER BLOCK GP

112-3572 CYLINDER HEAD AS

142-7339 CYLINDER HEAD AS

161-6190 CYLINDER HEAD AS

115-2322 CYLINDER HEAD GP

115-2323 CYLINDER HEAD GP

132-9976 CYLINDER HEAD GP

142-7341 CYLINDER HEAD GP

Truck sale:

USD $8,785

2000 CAT 3406E

Transgear Truck Supplies