ELECTRICAL AND STARTING SYSTEM
SWITCH GPWARNING GP
WIRING GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GP
#SEBP23950320
3E-0155: SWITCH GP-WIPER
3E-0155 SWITCH GP-WIPER -FRONT-INTERMITTENT
S/N 2KR1-UP
24 VOLT
PART OF 109-8195 PANEL GP-INSTRUMENT
S/N 2KR1-UP
24 VOLT
PART OF 109-8195 PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 110-7886 | [1] | SWITCH AS-WIPER (24-VOLT)(FRONT INTERMITTENT) | |
| 1A. | 2H-3920 | [1] | LOCKWASHER | |
| 1B. | 3E-3389 | [1] | WEDGE-RECEPTACLE LOCK (8-PIN) | |
| 1C. | 6V-8369 | [1] | NUT (7/16-28-THD) | |
| 1D. | 8T-8737 | [1] | PLUG-SEAL | |
| 1E. | 9W-0852 C | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | |
| 1F. | 102-8806 C | [1] | KIT-RECEPTACLE (8-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1G. | 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2. | 7T-9302 | [1] | KNOB AS-WIPER SWITCH (WASHER) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP23950321
110-8123: WARNING GP-BACKUP
110-8123 WARNING GP-BACKUP
S/N 2KR1-UP
S/N 2KR1-UP
For full view, you need register
#SEBP23950322
112-8987: WIRING GP-AIR CONDITIONER
112-8987 WIRING GP-AIR CONDITIONER
S/N 2KR1-1400
PART OF 115-2132 AIR CONDITIONER AR
Type 1
S/N 2KR1-1400
PART OF 115-2132 AIR CONDITIONER AR
Type 1
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 114-5667 | [1] | HARNESS AS-HEATER & AIR COND | |
| 2. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 4D-7794 | [3] | CLIP | |
| 5. | 2T-3019 | [1] | CLIP (LOOP) | |
| 6. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-8911 | [1] | BOLT (5/16-18X2-IN) | |
| 8. | 8M-2772 | [1] | CLIP (LOOP) | |
| 9. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(REFRIGERANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 10. | 9X-7378 | [1] | SEAL-O-RING | |
| 11. | 9G-9150 | [1] | CLIP | |
| 12. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 14. | 9U-2277 | [1] | CLIP AS | |
| 15. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
#SEBP23950323
112-8987: WIRING GP-AIR CONDITIONER
112-8987 WIRING GP-AIR CONDITIONER
S/N 2KR1-1400
PART OF 115-2132 AIR CONDITIONER AR
Type 2
S/N 2KR1-1400
PART OF 115-2132 AIR CONDITIONER AR
Type 2
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 142-1452 C | [1] | HARNESS AS-HEATER & AIR COND | |
| 2. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 3. | 3S-2093 | [2] | STRAP-CABLE | |
| 4. | 4D-7794 | [3] | CLIP | |
| 5. | 2T-3019 | [1] | CLIP (LOOP) | |
| 6. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 8T-8911 | [1] | BOLT (5/16-18X2-IN) | |
| 8. | 8M-2772 | [1] | CLIP (LOOP) | |
| 9. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(REFRIGERANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 10. | 9X-7378 | [1] | SEAL-O-RING | |
| 11. | 4L-9337 | [1] | BOLT (3/8-16X1.5-IN) | |
| 12. | 8T-4896 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 6V-8801 | [1] | NUT (3/8-16-THD) | |
| 14. | 9U-2277 | [2] | CLIP AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP23950324
144-3328: WIRING GP-AIR CONDITIONER
144-3328 WIRING GP-AIR CONDITIONER
S/N 2KR1401-UP
PART OF 147-5163 AIR CONDITIONER AR
S/N 2KR1401-UP
PART OF 147-5163 AIR CONDITIONER AR
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [2] | STRAP-CABLE | |
| 2. | 9U-2277 | [2] | CLIP AS | |
| 3. | 106-8704 | [1] | SUPPRESSOR AS-ARC | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 4. | 114-5333 | [1] | SWITCH AS-PRESSURE (HIGH LOW)(REFRIGERANT) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 5. | 8M-2772 | [1] | CLIP (LOOP) | |
| 6. | 9X-7378 | [1] | SEAL-O-RING | |
#SEBP23950325
109-8197: WIRING GP-CAB
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-1647 | [1] | GROMMET | |
| 2. | 3S-2093 | [18] | STRAP-CABLE | |
| 3. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 4. | 4P-7429 | [1] | CLIP (LADDER) | |
| 5. | 4P-8134 | [2] | CLIP (LADDER)(TIE WRAP) | |
| 6. | 4V-4164 | [6] | BUSHING-TERMINAL | |
| 7. | 6D-6146 | [3] | SCREW-MACHINE (10-32X1.25-IN) | |
| 8. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 9. | 6V-2687 | [8] | SCREW-PAN HEAD (10-24X1-IN) | |
| 10. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 11. | 7K-1181 | [15] | STRAP-CABLE | |
| 12. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 13. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 14. | 9F-8125 | [6] | LOCKWASHER | |
| 15. | 9M-5870 | [3] | GROMMET | |
| 16. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 17. | 098-8968 | [6] | WASHER (5X16X1.2-MM THK) | |
| 18. | 147-2350 | [1] | HARNESS AS-CAB (UPPER) | |
| 19. | 147-2351 | [1] | HARNESS AS-CAB (LOWER) | |
| 20. | 172-9391 Y | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 21. | 119-8983 | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHT) | |
| 22. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 23. | 122-4429 | [1] | PLATE | |
| 24. | 122-9854 | [1] | GASKET | |
| 25. | 123-2895 | [1] | PLATE | |
| 26. | 123-2896 | [1] | GASKET | |
| 27. | 123-4627 | [1] | GASKET | |
| 28. | 123-4628 | [2] | PLATE | |
| 29. | 099-3649 M | [8] | BOLT (M8X1.25X40-MM) | |
| 30. | 8T-4138 M | [12] | BOLT (M6X1X20-MM) | |
| 31. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 32. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23950326
140-9067: WIRING GP-CAB
140-9067 WIRING GP-CAB
S/N 2KR1159-3725
PART OF 109-7922 CAB AR, 134-5646, 186-0379 CANOPY AR-OPEN ROPS
S/N 2KR1159-3725
PART OF 109-7922 CAB AR, 134-5646, 186-0379 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [18] | STRAP-CABLE | |
| 2. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 3. | 4V-4164 | [6] | BUSHING-TERMINAL | |
| 4. | 6D-6146 | [3] | SCREW-MACHINE (10-32X1.25-IN) | |
| 5. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 6V-2687 | [8] | SCREW-PAN HEAD (10-24X1-IN) | |
| 7. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 8. | 7K-1181 | [15] | STRAP-CABLE | |
| 9. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 10. | 9F-8125 | [6] | LOCKWASHER | |
| 11. | 098-8968 | [6] | WASHER (5X16X1.2-MM THK) | |
| 12. | 176-6564 | [1] | HARNESS AS-CAB | |
| 13. | 119-8983 | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHT) | |
| 14. | 122-4429 | [1] | PLATE | |
| 15. | 122-9854 | [1] | GASKET | |
| 16. | 123-2895 | [1] | PLATE | |
| 17. | 123-2896 | [1] | GASKET | |
| 18. | 123-4627 | [1] | GASKET | |
| 19. | 123-4628 | [2] | PLATE | |
| 20. | 172-9389 CY | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 21. | 172-9391 CY | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 22. | 178-3866 | [1] | HARNESS AS-CAB (UPPER) | |
| 23. | 099-3649 M | [8] | BOLT (M8X1.25X40-MM) | |
| 24. | 2S-1647 | [1] | GROMMET | |
| 25. | 4P-7429 | [1] | CLIP (LADDER) | |
| 26. | 4P-8134 | [2] | CLIP (LADDER) | |
| 27. | 8T-4138 M | [12] | BOLT (M6X1X20-MM) | |
| 28. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 31. | 9M-5870 | [3] | GROMMET | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23950327
140-9067: WIRING GP-CAB
140-9067 WIRING GP-CAB
S/N 2KR1-4183
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
S/N 2KR1-4183
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [18] | STRAP-CABLE | |
| 2. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 3. | 4V-4164 | [6] | BUSHING-TERMINAL | |
| 4. | 6D-6146 | [3] | SCREW-MACHINE (10-32X1.25-IN) | |
| 5. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 6V-2687 | [8] | SCREW-PAN HEAD (10-24X1-IN) | |
| 7. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 8. | 7K-1181 | [15] | STRAP-CABLE | |
| 9. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 10. | 9F-8125 | [6] | LOCKWASHER | |
| 11. | 098-8968 | [6] | WASHER (5X16X1.2-MM THK) | |
| 12. | 176-6564 | [1] | HARNESS AS-CAB | |
| 13. | 119-8983 | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHT) | |
| 14. | 122-4429 | [1] | PLATE | |
| 15. | 122-9854 | [1] | GASKET | |
| 16. | 123-2895 | [1] | PLATE | |
| 17. | 123-2896 | [1] | GASKET | |
| 18. | 123-4627 | [1] | GASKET | |
| 19. | 123-4628 | [2] | PLATE | |
| 20. | 172-9389 CY | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 21. | 172-9391 CY | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 22. | 178-3866 | [1] | HARNESS AS-CAB (UPPER) | |
| 23. | 099-3649 M | [8] | BOLT (M8X1.25X40-MM) | |
| 24. | 2S-1647 | [1] | GROMMET | |
| 25. | 4P-7429 | [1] | CLIP (LADDER) | |
| 26. | 4P-8134 | [2] | CLIP (LADDER) | |
| 27. | 8T-4138 M | [12] | BOLT (M6X1X20-MM) | |
| 28. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 29. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 31. | 9M-5870 | [3] | GROMMET | |
| 32. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23950328
140-9067: WIRING GP-CAB
140-9067 WIRING GP-CAB
S/N 2KR4184-4552
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
S/N 2KR4184-4552
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [17] | STRAP-CABLE | |
| 2. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 3. | 4V-4164 | [6] | BUSHING-TERMINAL | |
| 4. | 6D-6146 | [3] | SCREW-MACHINE (10-32X1.25-IN) | |
| 5. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 7. | 7K-1181 | [15] | STRAP-CABLE | |
| 8. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 9. | 9F-8125 | [6] | LOCKWASHER | |
| 10. | 098-8968 | [6] | WASHER (5X16X1.2-MM THK) | |
| 11. | 122-4429 | [1] | PLATE | |
| 12. | 122-9854 | [1] | GASKET | |
| 13. | 123-2895 | [1] | PLATE | |
| 14. | 123-2896 | [1] | GASKET | |
| 15. | 123-4627 | [1] | GASKET | |
| 16. | 123-4628 | [2] | PLATE | |
| 17. | 152-9023 C | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHT) | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 18. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 19. | 172-9391 Y | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 20. | 194-3479 C | [1] | HARNESS AS-CAB | |
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [6] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2265 | [4] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-7146 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 110-6846 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [3] | KIT-RECEPTACLE (8-PIN) | ||
| 8N-1513 | [1] | RECEPTACLE AS-CONNECTOR (37-PIN)(37 PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1519 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN)(12 PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1530 | [1] | RECEPTACLE AS (12-PIN) | ||
| 8N-1536 | [1] | NUT (1-5/8-18-THD) | ||
| 8N-1534 | [1] | RECEPTACLE AS-CONNECTOR (20-PIN) | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 8N-1535 | [2] | BELL AS-END | ||
| 7G-7917 | [7] | PLUG-SEAL | ||
| 7G-7919 | [3] | PLUG-SEAL | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 8T-8737 | [147] | PLUG-SEAL | ||
| 21. | 099-3649 M | [8] | BOLT (M8X1.25X40-MM) | |
| 22. | 2S-1647 | [1] | GROMMET | |
| 23. | 4P-7429 | [1] | CLIP (LADDER) | |
| 24. | 4P-8134 | [2] | CLIP (LADDER) | |
| 25. | 8T-4138 M | [12] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 29. | 9M-5870 | [3] | GROMMET | |
| 30. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP23950329
140-9067: WIRING GP-CAB
140-9067 WIRING GP-CAB
S/N 2KR4553-UP
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
S/N 2KR4553-UP
PART OF 109-7922 CAB AR, 186-0379 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 980G WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [17] | STRAP-CABLE | |
| 2. | 4B-2049 | [6] | NUT (10-32-THD) | |
| 3. | 4V-4164 | [6] | BUSHING-TERMINAL | |
| 4. | 6D-6146 | [3] | SCREW-MACHINE (10-32X1.25-IN) | |
| 5. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 6. | 6Y-6584 | [1] | STRAP AS-GROUND | |
| 7. | 7K-1181 | [15] | STRAP-CABLE | |
| 8. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 9. | 9F-8125 | [6] | LOCKWASHER | |
| 10. | 098-8968 | [6] | WASHER (5X16X1.2-MM THK) | |
| 11. | 122-4429 | [1] | PLATE | |
| 12. | 122-9854 | [1] | GASKET | |
| 13. | 123-2895 | [1] | PLATE | |
| 14. | 123-2896 | [1] | GASKET | |
| 15. | 123-4627 | [1] | GASKET | |
| 16. | 123-4628 | [2] | PLATE | |
| 17. | 152-9023 | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHT) | |
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 18. | 172-9389 Y | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 19. | 172-9391 Y | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 20. | 199-6006 C | [1] | HARNESS AS-CAB | |
| 155-2260 | [4] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [6] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2265 | [4] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH CONNECTING PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 9X-0141 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8557 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3490 | [2] | SEAL-CONNECTOR (40-PIN) | ||
| 9X-7146 | [1] | PLUG AS-CONNECTOR (24-PIN) | ||
| 3E-4367 | [1] | RING-RETAINING | ||
| 3E-8558 M | [1] | BOLT (M5X0.8X39.37-MM) | ||
| 9X-3265 | [2] | SEAL-CONNECTOR (24-PIN) | ||
| 110-6846 | [2] | PLUG AS-CONNECTOR (40-PIN) | ||
| 110-6844 | [1] | SEAL | ||
| 102-8801 | [2] | KIT-RECEPTACLE (12-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [3] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8N-1513 | [1] | RECEPTACLE AS-CONNECTOR (37-PIN)(37 PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1519 | [1] | RECEPTACLE AS-CONNECTOR (12-PIN)(12 PIN) | ||
| 8N-1522 | [1] | NUT (2-1/4-16-THD) | ||
| 8N-1530 | [1] | RECEPTACLE AS (12-PIN) | ||
| 8N-1536 | [1] | NUT (1-5/8-18-THD) | ||
| 8N-1534 | [1] | RECEPTACLE AS-CONNECTOR (20-PIN) | ||
| 9X-1339 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 8N-1521 | [2] | BELL AS-END | ||
| 8N-1535 | [2] | BELL AS-END | ||
| 7G-7917 | [7] | PLUG-SEAL | ||
| 7G-7919 | [3] | PLUG-SEAL | ||
| 7G-7920 | [1] | PLUG-SEAL | ||
| 8T-8737 | [147] | PLUG-SEAL | ||
| 21. | 099-3649 M | [8] | BOLT (M8X1.25X40-MM) | |
| 22. | 2S-1647 | [1] | GROMMET | |
| 23. | 4P-7429 | [1] | CLIP (LADDER) | |
| 24. | 4P-8134 | [2] | CLIP (LADDER) | |
| 25. | 8T-4138 M | [12] | BOLT (M6X1X20-MM) | |
| 26. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 27. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 28. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 29. | 9M-5870 | [3] | GROMMET | |
| 30. | 9N-0869 | [8] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
