AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

8E-6398 VALVE GP-SELECTOR -TRANSMISSION S/N 1WY1-UP PART OF 116-7196 VALVE GP-TRANSMISSION CONTROL 980G


POWER TRAIN
VALVE GP-SELECTOR
VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SOLENOID
CONTROL GP-TRANSMISSION HYD
AXLE GP

WHEEL LOADER 980G WHEEL LOADER 2KR
 980G Wheel Loader 2KR00001-UP (MACHINE) POWERED BY 3406C Engine SEBP2395 980G 2KR   (1995)

POWER TRAIN

VALVE GP-SELECTOR
VALVE GP-SELECTOR
8E-5158 VALVE GP-SELECTOR
VALVE GP-SELECTOR
8E-6398 VALVE GP-SELECTOR
 

#SEBP23950470
 

8E-6398: VALVE GP-SELECTOR

8E-6398 VALVE GP-SELECTOR -TRANSMISSION
S/N 1WY1-UP
PART OF 116-7196 VALVE GP-TRANSMISSION CONTROL
i00166156 SEBP2395
8E6398 VALVE GP-SELECTOR Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-9519 [1] SPRING  
2. 6Y-0725 [1] SPOOL-SELECTOR  
3. 6Y-0726 [2] RETAINER  
4. 6Y-0729 [1] STOP  
5. 330-8673 [1] MANIFOLD-BOTTOM  
6. 2B-2695 [2] BOLT (5/16-18X0.875-IN)  
7. 5P-6261 [1] RING-RETAINING  
8. 6J-2419 [1] SEAL-O-RING  
9. 7S-6997 [1] COVER  
 

#SEBP23950471
 

107-4409: VALVE GP-SELECTOR & PRESS CONT

107-4409 VALVE GP-SELECTOR & PRESS CONT -TRANSMISSION
S/N 1AY1-UP
PART OF 107-4414 VALVE GP-TRANSMISSION CONTROL
i00171289 SEBP2395
1074409 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0554 [1] BODY  
2. 6Y-0728 [1] COVER  
3. 2B-2695 [5] BOLT (5/16-18X0.875-IN)  
4. 6P-4978 [1] SPRING  
5. 2A-3746 [1] PLUG-CUP  
7. 6P-4940 [1] STOP  
8. 9W-5567 [1] SPOOL AS-RELIEF  
9. 9W-5568 [1] SLUG  
10. 6Y-0724 [1] SPOOL-SPEED SELECTOR  
11. 7G-4842 [1] SPRING  
12. 9P-3041 [1] SPRING  
13. 6Y-0726 [4] RETAINER  
14. 6I-9519 [2] SPRING  
15. 6Y-0727 [2] STOP  
16. 4J-0521 [2] SEAL-O-RING  
17. 6P-4943 [1] SPOOL-RATIO  
18. 6F-6673 [2] SEAL-O-RING  
19. 8E-3026 [1] PISTON-LOAD  
20. 5M-9622 B [1] SHIM (1.6-MM THK)  
21. 5M-9623 B [1] SHIM (0.9-MM THK)  
22. 5M-9624 B [3] SHIM (0.25-MM THK)  
23. 6P-9785 [1] SPRING  
24. 3P-8485 [1] RING-RETAINING  
25. 6P-9786 [1] RETAINER  
26. 6P-9784 [1] SPRING  
27. 6P-9783 [1] SPRING  
28. 6Y-0736 [1] SPOOL-DIFFERENTIAL  
29. 2S-4872 [1] STOP  
30. 5P-6261 [2] RING-RETAINING  
31. 6Y-0725 [1] SPOOL-SELECTOR  
32. 5S-7816 [1] SLUG  
33. 2S-0696 [2] DOWEL  
34. 6Y-0744 [1] STOP  
35. 238-5507 [1] PLUG AS  
  8L-2779 [1] SEAL-O-RING  
36. 8P-9296 [1] ORIFICE-PLUG  
  B   USE AS REQUIRED
 

#SEBP23950472
 

124-5200: VALVE GP-SELECTOR & PRESS CONT

124-5200 VALVE GP-SELECTOR & PRESS CONT -TRANSMISSION
S/N 1WY1-UP
PART OF 116-7196 VALVE GP-TRANSMISSION CONTROL
i00171487 SEBP2395
1245200 VALVE GP-SELECTOR & PRESS CONT Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 106-0554 [1] BODY  
2. 6Y-0728 [1] COVER  
3. 2B-2695 [5] BOLT (5/16-18X0.875-IN)  
4. 6P-4978 [1] SPRING  
5. 2A-3746 [1] PLUG-CUP  
6. 238-5507 [1] PLUG AS  
  8L-2779 [1] SEAL-O-RING  
7. 6P-4940 [1] STOP  
8. 9W-5567 [1] SPOOL AS-RELIEF  
  3D-8317 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
  8M-1013 [1] RETAINER  
9. 9W-5568 [1] SLUG  
10. 6Y-0724 [1] SPOOL-SPEED SELECTOR  
11. 7G-4842 [1] SPRING  
12. 9P-3041 [1] SPRING  
13. 6Y-0726 [4] RETAINER  
14. 6I-9519 [2] SPRING  
15. 6Y-0727 [2] STOP  
16. 4J-0521 [2] SEAL-O-RING  
17. 6P-4943 [1] SPOOL-RATIO  
18. 6F-6673 [2] SEAL-O-RING  
19. 8E-3026 [1] PISTON-LOAD  
20. 5M-9622 B [1] SHIM (1.6-MM THK)  
21. 5M-9623 B [1] SHIM (0.9-MM THK)  
22. 5M-9624 B [3] SHIM (0.25-MM THK)  
23. 6P-9785 [1] SPRING  
24. 3P-8485 [1] RING-RETAINING  
25. 6P-9786 [1] RETAINER  
26. 6P-9784 [1] SPRING  
27. 6P-9783 [1] SPRING  
28. 8E-6433 [1] SPOOL-DIFFERENTIAL  
29. 2S-4872 [1] STOP  
30. 5P-6261 [2] RING-RETAINING  
31. 6Y-0725 [1] SPOOL-SELECTOR  
32. 5S-7816 [1] SLUG  
33. 2S-0696 [2] DOWEL  
34. 6Y-0744 [1] STOP  
  B   USE AS REQUIRED
 

#SEBP23950473
 

147-5399: VALVE GP-SOLENOID

147-5399 VALVE GP-SOLENOID
S/N 1AY1-UP; 1WY1-UP
12 VOLT DC
PART OF 107-4414, 116-7196 VALVE GP-TRANSMISSION CONTROL
i01408341 SEBP2395
1475399 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-8611 [1] CARTRIDGE AS  
  111-0343 [1] LOCKNUT (5/16-18-THD)  
  149-5628 [1] WASHER (8.3X38.1X1.2-MM THK)  
2. 218-9901 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3. 149-5628 [1] WASHER (8.3X38.1X1.2-MM THK)  
4. 111-0343 [1] LOCKNUT (5/16-18-THD)  
   
    AVAILABLE REPAIR KIT(S):
  100-4083 [1] KIT-SEAL  
    (INCLUDES SEALS & RINGS)
 

#SEBP23950474
 

107-4414: VALVE GP-TRANSMISSION CONTROL

107-4414 VALVE GP-TRANSMISSION CONTROL
S/N 1AY1-UP
PART OF 107-4408 CONTROL GP-TRANSMISSION HYD
Type 1
i00171290 SEBP2395
1074414 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-5158 Y [1] VALVE GP-SELECTOR  
2. 8E-4320 [1] PLATE  
3. 107-4409 Y [1] VALVE GP-SELECTOR & PRESS CONT  
4. 108-2521 [1] MANIFOLD-TOP  
5. 8E-4387 [1] MANIFOLD  
6. 8E-7841 [1] CLIP AS-CONNECTING  
7. 2B-2695 [3] BOLT (5/16-18X0.875-IN)  
8. 9M-1974 [34] WASHER-HARD (8.8X16X2-MM THK)  
9. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
10. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
11. 9S-8007 [13] PLUG  
12. 7J-0204 [13] SEAL-O-RING  
13. 147-5399 Y [6] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
14. 213-4752 [1] WIRING GP-TRANSMISSION (SHIFT SOLENOIDS)  
15. 8E-7842 [1] CLIP AS-CONNECTING  
16. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
17. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
18. 3J-1907 [1] SEAL-O-RING  
20. 1L-5081 [4] SPACER (0.41X0.75X0.56-IN THK)  
21. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 1P-7404 [1] EYEBOLT (5/16-18X1.15-IN)  
23. 8M-2772 [4] CLIP (LOOP)  
24. 5S-0003 [1] NUT (5/16-18-THD)  
25. 128-4111 [1] SCREEN  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23950475
 

107-4414: VALVE GP-TRANSMISSION CONTROL

107-4414 VALVE GP-TRANSMISSION CONTROL
S/N 1AY1-UP
PART OF 107-4408 CONTROL GP-TRANSMISSION HYD
Type 2
i03205786 SEBP2395
1074414 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-5158 Y [1] VALVE GP-SELECTOR  
2. 8E-4320 [1] PLATE  
3. 107-4409 Y [1] VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION)  
4. 108-2521 [1] MANIFOLD-TOP  
5. 8E-4387 [1] MANIFOLD  
6. 8E-7841 [1] CLIP AS-CONNECTING  
7. 2B-2695 [3] BOLT (5/16-18X0.875-IN)  
8. 9M-1974 C [35] WASHER-HARD (8.8X16X2-MM THK)  
9. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
10. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
11. 9S-8007 [12] PLUG  
12. 7J-0204 [12] SEAL-O-RING  
13. 147-5399 Y [6] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
14. 131-2150 C [1] HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS)  
15. 8E-7842 [1] CLIP AS-CONNECTING  
16. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
17. 0S-1588 C [3] BOLT (3/8-16X1.25-IN)  
18. 3J-1907 [1] SEAL-O-RING  
19. 106-6305 C [1] SPACER (17.09-MM THK)  
20. 1L-5081 C [3] SPACER (0.41X0.75X0.56-IN THK)  
21. 5M-2894 C [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 1P-7404 [1] EYEBOLT (5/16-18X1.15-IN)  
23. 8M-2772 [4] CLIP (LOOP)  
24. 5S-0003 [1] NUT (5/16-18-THD)  
25. 031-2701 C [1] BOLT-LOCKING (5/16-18X1.25-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP23950476
 

116-7196: VALVE GP-TRANSMISSION CONTROL

116-7196 VALVE GP-TRANSMISSION CONTROL
S/N 1WY1-UP
PART OF 116-7197 CONTROL GP-TRANSMISSION HYD
i00171450 SEBP2395
1167196 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6398 Y [1] VALVE GP-SELECTOR (TRANSMISSION)(TRANSMISSION)  
2. 8E-4320 [1] PLATE  
3. 124-5200 Y [1] VALVE GP-SELECTOR & PRESS CONT (TRANSMISSION)  
4. 108-2521 [1] MANIFOLD-TOP  
5. 8E-4387 [1] MANIFOLD  
6. 8E-7841 [1] CLIP AS-CONNECTING  
7. 2B-2695 [3] BOLT (5/16-18X0.875-IN)  
8. 9M-1974 [35] WASHER-HARD (8.8X16X2-MM THK)  
9. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
10. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
11. 9S-8007 [12] PLUG  
12. 7J-0204 [12] SEAL-O-RING  
13. 147-5399 Y [6] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
14. 131-2150 [1] HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS)  
  102-8802 [6] KIT-RECEPTACLE (2-PIN)  
    (EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
15. 8E-7842 [1] CLIP AS-CONNECTING  
16. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
17. 0S-1588 [3] BOLT (3/8-16X1.25-IN)  
18. 3J-1907 [1] SEAL-O-RING  
19. 106-6305 [1] SPACER (17.09-MM THK)  
20. 1L-5081 [3] SPACER (0.41X0.75X0.56-IN THK)  
21. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 1P-7404 [1] EYEBOLT (5/16-18X1.15-IN)  
23. 8M-2772 [4] CLIP (LOOP)  
24. 5S-0003 [1] NUT (5/16-18-THD)  
25. 031-2701 [1] BOLT-LOCKING (5/16-18X1.25-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP23950477
 

108-0066: WHEEL & FINAL DRIVE GP

108-0066 WHEEL & FINAL DRIVE GP
S/N 2KR1-3392
PART OF 108-0060, 124-3749 AXLE AR-FIXED, 107-9680, 124-3751, 124-3752 AXLE AR-OSCILLATING
i00166179 SEBP2395
1080066 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8097 M [6] BOLT (M12X1.75X30-MM)  
2. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 129-3046 [1] CARRIER-PLANETARY  
4. 105-8748 [3] SHAFT-PLANETARY  
5. 6T-5545 [3] DOWEL  
6. 105-8743 [3] BUSHING  
7. 109-9719 [6] WASHER-THRUST  
8. 5J-1086 [1] SEAL-O-RING  
9. 9X-3977 [1] SEAL-RING  
10. 8T-8441 M [3] BOLT-SOCKET HEAD (M12X1.75X25-MM)  
11. 108-0059 [1] PLATE-RETAINER  
12. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
13. 8K-0066 B [1] SHIM (0.112-IN THK)  
14. 110-0551 [1] HUB AS  
15. 8K-0079 [1] BUSHING-TERMINAL  
16. 8T-5091 M [3] BOLT (M8X1.25X20-MM)  
17. 8E-9571 [3] WASHER-HARD (8.8X16X7-MM THK)  
18. 129-3045 [1] WHEEL  
19. 7M-5334 [1] CONE-BEARING  
20. 5F-2465 [1] CUP-BEARING  
21. 2P-8353 [1] CONE-BEARING  
22. 2D-6511 [1] CUP-BEARING  
23. 135-7742 [1] SPINDLE  
24. 9W-6688 [1] SEAL GP-DUO-CONE  
25. 5P-4484 [1] PLUG-MAGNETIC  
26. 7M-8485 [1] SEAL-O-RING  
27. 110-4798 [1] GEAR-SUN (17-TEETH)  
28. 110-4799 [3] GEAR-PLANETARY (22-TEETH)(22 TEETH)  
29. 110-4802 [1] GEAR-RING (64-TEETH)(64 TEETH)  
30. 5F-1678 [1] SEAL-O-RING  
31. 6D-0692 [1] SEAL-O-RING  
32. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
33. 2A-3852 [1] PLUG  
34. 1S-3889 [1] WASHER  
35. 110-2055 [1] COVER AS  
36. 099-4691 M [2] BOLT-LOCKING (M12X1.75X25-MM)  
37. 109-7848 [1] BUTTON  
38. 1U-8846 B SEALANT-GASKET  
39. 108-0350 [1] RING-RETAINING  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23950478
 

108-0066: WHEEL & FINAL DRIVE GP

108-0066 WHEEL & FINAL DRIVE GP
S/N 2KR3393-3510
PART OF 108-0060, 124-3749 AXLE AR-FIXED, 107-9680, 124-3751, 124-3752 AXLE AR-OSCILLATING
i04398473 SEBP2395
1080066 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8097 M [6] BOLT (M12X1.75X30-MM)  
2. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 129-3046 [1] CARRIER-PLANETARY  
4. 105-8748 [3] SHAFT-PLANETARY  
5. 6T-5545 [3] DOWEL  
6. 105-8743 [3] BUSHING  
7. 109-9719 [6] WASHER-THRUST  
8. 5J-1086 [1] SEAL-O-RING  
9. 9X-3977 [1] SEAL-RING  
10. 8T-8441 M [3] BOLT-SOCKET HEAD (M12X1.75X25-MM)  
11. 163-4527 C [1] PLATE-BEARING  
12. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
13. 8K-0066 B [1] SHIM (0.112-IN THK)  
14. 110-0551 [1] HUB AS  
15. 8K-0079 [1] BUSHING-TERMINAL  
16. 8T-5091 M [3] BOLT (M8X1.25X20-MM)  
17. 8E-9571 [3] WASHER-HARD (8.8X16X7-MM THK)  
18. 129-3045 [1] WHEEL  
19. 7M-5334 [1] CONE-BEARING  
20. 5F-2465 [1] CUP-BEARING  
21. 2P-8353 [1] CONE-BEARING  
22. 2D-6511 [1] CUP-BEARING  
23. 135-7742 [1] SPINDLE  
24. 9G-5319 [1] SEAL GP-DUO-CONE  
25. 5P-4484 [1] PLUG-MAGNETIC  
26. 7M-8485 [1] SEAL-O-RING  
27. 159-8168 [1] GEAR-SUN (17-TEETH)  
28. 159-8169 [3] GEAR-PLANETARY (22-TEETH)  
29. 110-4802 [1] GEAR-RING (64-TEETH)  
30. 5F-1678 [1] SEAL-O-RING  
31. 6D-0692 [1] SEAL-O-RING  
32. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
33. 2A-3852 [1] PLUG  
34. 1S-3889 [1] WASHER  
35. 110-2055 [1] COVER AS  
36. 099-4691 M [2] BOLT-LOCKING (M12X1.75X25-MM)  
37. 109-7848 [1] BUTTON  
38. 1U-8846 B SEALANT-GASKET  
39. 108-0350 [1] RING-RETAINING  
40. 163-4526 C [1] WASHER-THRUST (72.5X94X5-MM THK)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP23950479
 

160-5585: WHEEL & FINAL DRIVE GP

160-5585 WHEEL & FINAL DRIVE GP
S/N 2KR3511-UP
PART OF 108-0060, 124-3749 AXLE AR-FIXED, 107-9680, 124-3751, 124-3752 AXLE AR-OSCILLATING
i01148649 SEBP2395
1605585 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 980G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8097 M [6] BOLT (M12X1.75X30-MM)  
2. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
3. 129-3046 [1] CARRIER-PLANETARY  
4. 297-3030 [3] SHAFT-PLANETARY  
5. 6T-5545 [3] DOWEL  
6. 105-8743 [3] BUSHING  
7. 109-9719 [6] WASHER-THRUST  
8. 5J-1086 [1] SEAL-O-RING  
9. 9X-3977 [1] SEAL-RING  
10. 8T-8441 M [3] BOLT-SOCKET HEAD (M12X1.75X25-MM)  
11. 163-4527 [1] PLATE-BEARING  
12. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
13. 8K-0066 B [1] SHIM (0.112-IN THK)  
14. 110-0551 [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
15. 108-0350 [1] RING-RETAINING  
16. 8T-5091 M [3] BOLT (M8X1.25X20-MM)  
17. 8E-9571 [3] WASHER-HARD (8.8X16X7-MM THK)  
18. 319-5239 [1] WHEEL  
19. 7M-5334 [1] CONE-BEARING  
20. 5F-2465 [1] CUP-BEARING  
21. 2P-8353 [1] CONE-BEARING  
22. 2D-6511 [1] CUP-BEARING  
23. 135-7742 [1] SPINDLE  
24. 163-4526 [1] WASHER-THRUST (72.5X94X5-MM THK)  
25. 5P-4483 [1] PLUG  
26. 7M-8485 [1] SEAL-O-RING  
27. 249-7870 [1] GEAR-SUN (17-TEETH)  
28. 159-8169 [3] GEAR-PLANETARY (22-TEETH)  
29. 110-4802 [1] GEAR-RING (64-TEETH)  
30. 110-2055 [1] COVER AS  
  1U-8846 B [1] SEALANT-GASKET  
  099-4691 M [2] BOLT-LOCKING (M12X1.75X25-MM)  
  109-7848 [1] BUTTON  
31. 6D-0692 [1] SEAL-O-RING  
32. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
33. 8M-3837 [1] PLUG-MAGNETIC  
34. 1S-3889 [1] WASHER  
35. 5F-1678 [1] SEAL-O-RING  
36. 9G-5319 [1] SEAL GP-DUO-CONE  
  B   USE AS REQUIRED
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

Information:

Caterpillar Parts SIS Catalog 980G :

VALVE GP-SELECTOR
8E-5158 VALVE GP-SELECTOR
VALVE GP-RELIEF
8P-1471 VALVE GP-RELIEF
UNIVERSAL JOINT GP
107-5006 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
107-5006 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
107-5005 UNIVERSAL JOINT GP
141-1944 TRANSMISSION AR
116-7684 TRANSMISSION AR
106-6452 TRANSMISSION AR
VALVE GP-SELECTOR & PRESS CONT
107-4409 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
124-5200 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SOLENOID
147-5399 VALVE GP-SOLENOID
VALVE GP-TRANSMISSION CONTROL
107-4414 VALVE GP-TRANSMISSION CONTROL
VALVE GP-TRANSMISSION CONTROL
107-4414 VALVE GP-TRANSMISSION CONTROL
VALVE GP-TRANSMISSION CONTROL
116-7196 VALVE GP-TRANSMISSION CONTROL
WHEEL & FINAL DRIVE GP
108-0066 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
108-0066 WHEEL & FINAL DRIVE GP

Truck sale:

Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
MACALLISTER MACHINERY CO., INC
 
78,208 
Caterpillar 980G, Wheel Loaders, Construction


 
69,976 
Caterpillar 980G, Wheel Loaders, Construction


Caterpillar 980G
 
Caterpillar 980G
- Wheel Loaders
ZIEGLER CAT
 
368,500 
Caterpillar 980G, Wheel Loaders, Construction


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.