119-0400 HYDRAULIC AR S/N 9DM1-UP PART OF 119-0000 GENERAL AR 814F WHEEL DOZER

Part No	Qty	Parts name
121-3180 Y	[1]	LINES GP-HYDRAULIC
121-3185 Y	[1]	LINES GP-LIFT CYLINDER
121-3187 Y	[1]	LINES GP-PILOT
121-3334 Y	[1]	LINES GP-TILT & TIP CYLINDER
121-3181 Y	[1]	PUMP & MTG GP-HYDRAULIC
9T-8409 Y	[1]	TANK & FILTER GP-HYDRAULIC
121-3183 Y	[1]	VALVE & MTG GP-MAIN CONTROL (3-FUNCTION)
Y		SEPARATE ILLUSTRATION

#SEBP24010281

121-3180: LINES GP-HYDRAULIC

LINES GP-HYDRAULIC

121-3180 LINES GP-HYDRAULIC
S/N 9DM1-UP
PART OF 119-0400 HYDRAULIC AR

i00165935 SEBP2401

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9B-7237	[6]	BOLT (3/8-16X1.25-IN)
2.	8T-4896	[13]	WASHER-HARD (10.2X18.5X2.5-MM THK)
3.	123-5949	[1]	TUBE AS
4.	1P-3705	[1]	SEAL-RECTANGULAR
5.	123-5956	[5]	BRACKET
6.	8T-8919	[2]	BOLT (1/2-13X1.75-IN)
7.	8T-4223	[12]	WASHER-HARD (13.5X25.5X3-MM THK)
8.	4L-6454	[2]	BOLT (3/8-16X1-IN)
9.	8T-4191 M	[4]	BOLT (M10X1.5X16-MM)
10.	6V-8801	[5]	NUT (3/8-16-THD)
11.	124-2931	[1]	BRACKET
12.	124-2930	[1]	BRACKET
13.	123-5951 I	[1]	HOSE AS
14.	8C-3206	[4]	FLANGE-HALF
15.	4J-0520	[2]	SEAL-O-RING
16.	8T-4196 M	[4]	BOLT (M10X1.5X35-MM)
17.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
18.	123-5952 I	[1]	HOSE AS
19.	2P-8421	[1]	ADAPTER-O-RING
20.	3D-2824	[1]	SEAL-O-RING
21.	3J-1907	[1]	SEAL-O-RING
22.	6V-3965	[1]	FITTING (QUICK DISCONNECT)
23.	6V-0852	[1]	CAP-DUST
24.	8T-8898	[1]	CONNECTOR
25.	7M-8485	[2]	SEAL-O-RING
26.	6V-9854	[2]	ELBOW (SWIVEL)
27.	5K-9090	[4]	SEAL-O-RING
28.	6V-8635	[1]	CONNECTOR
29.	9S-6130	[1]	PLUG
30.	2S-4078	[1]	SEAL-O-RING
31.	7X-7893 E		HOSE (16CM)
32.	8T-4985	[2]	CLAMP-HOSE
33.	123-5953	[1]	TUBE AS
34.	2H-6338	[2]	SEAL-O-RING
35.	8T-9393	[4]	BOLT (5/8-11X1.5-IN)
36.	8T-4122	[4]	WASHER-HARD (17X32X3.5-MM THK)
37.	7X-0325	[4]	BOLT (1/2-13X2.5-IN)
38.	123-5955	[1]	TUBE AS
39.	1P-4585	[2]	FLANGE-HALF
40.	123-5950	[1]	TUBE AS
41.	4J-0522	[2]	SEAL-O-RING
42.	5P-2424	[4]	BOLT (1/2-13X2.25-IN)
43.	124-0176	[1]	BRACKET
44.	7X-0312	[4]	BOLT (7/16-14X2.5-IN)
45.	8T-5360	[4]	WASHER (12X22.5X2.5-MM THK)
46.	5R-5066	[1]	ADAPTER
47.	1P-4578	[2]	FLANGE-HALF
48.	8C-3446	[1]	VALVE-SAMPLING
49.	3J-7354	[1]	SEAL-O-RING
50.	8C-3451	[1]	CAP-DUST (HYDRAULIC OIL)
51.	8T-9383	[2]	BOLT (1/2-13X0.75-IN)
52.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
53.	8T-4133 M	[1]	NUT (M10X1.5-THD)
54.	7D-7233	[1]	CLIP (LOOP)
55.	3V-0778	[1]	BRACKET
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP24010282

121-3068: LINES GP-HYDRAULIC OIL COOLER

LINES GP-HYDRAULIC OIL COOLER

121-3068 LINES GP-HYDRAULIC OIL COOLER
S/N 9DM1-UP
PART OF 119-0010 CHASSIS AR

i00165928 SEBP2401

1213068 LINES GP-HYDRAULIC OIL COOLER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-2094 E		HOSE (13CM)
2.	7X-7958	[12]	CLAMP-HOSE
3.	123-5944	[1]	TUBE AS
4.	5K-9090	[2]	SEAL-O-RING
5.	123-5943	[1]	TUBE AS
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	6V-9005	[1]	ELBOW
8.	6V-9008	[1]	ELBOW
9.	7M-8485	[2]	SEAL-O-RING
10.	123-5942	[1]	TUBE
11.	123-5941	[1]	TUBE
12.	8T-4896	[9]	WASHER-HARD (10.2X18.5X2.5-MM THK)
13.	1S-0724	[8]	CLIP
14.	112-0881	[2]	TUBE
15.	130-9248	[1]	TUBE AS
16.	6V-8398	[5]	SEAL-O-RING
17.	6V-8801	[4]	NUT (3/8-16-THD)
18.	130-9247	[1]	TUBE AS
19.	130-9473 I	[1]	HOSE AS
20.	6V-9851	[1]	ELBOW
21.	8M-2770	[2]	CLIP (LOOP)
22.	5M-3062	[2]	BOLT (3/8-16X0.75-IN)
23.	8T-4121	[3]	WASHER-HARD (11X21X2.5-MM THK)
24.	6D-4246	[2]	CLIP (LOOP)
25.	8T-4185 M	[1]	BOLT (M10X1.5X50-MM)
26.	8R-0647	[1]	SPACER
27.	116-4491	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
28.	8W-0044	[1]	PLATE
29.	8T-4136 M	[2]	BOLT (M10X1.5X25-MM)
30.	8T-4133 M	[1]	NUT (M10X1.5-THD)
31.	4L-1263	[1]	NUT-SPACER (3/8-16-THD)
	E		ORDER BY THE CENTIMETER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART

#SEBP24010283

121-3185: LINES GP-LIFT CYLINDER

LINES GP-LIFT CYLINDER

121-3185 LINES GP-LIFT CYLINDER
S/N 9DM1-UP
PART OF 119-0400 HYDRAULIC AR
Type 1

i00165938 SEBP2401

1213185 LINES GP-LIFT CYLINDER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8J-3146	[2]	CLAMP
2.	124-2928	[2]	BRACKET AS
			(EACH INCLUDES)
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
3.	209-2633	[1]	TUBE AS (RH)
4.	209-2634	[1]	TUBE AS (LH)
5.	148-8362	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	8T-6684	[1]	ELBOW
6.	4L-6454	[8]	BOLT (3/8-16X1-IN)
7.	5P-1075	[8]	WASHER-HARD (10.2X22.5X3-MM THK)

#SEBP24010284

121-3185: LINES GP-LIFT CYLINDER

LINES GP-LIFT CYLINDER

121-3185 LINES GP-LIFT CYLINDER
S/N 9DM1-UP
PART OF 119-0400 HYDRAULIC AR
Type 2

i05231255 SEBP2401

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8J-3146	[2]	CLAMP
2.	124-2928	[2]	BRACKET AS
			(EACH INCLUDES)
	9F-2978	[2]	NUT-WELD (3/8-16-THD)
3.	360-2964	[1]	TUBE AS (RH)
4.	360-2965	[1]	TUBE AS (LH)
5.	148-8362	[2]	ELBOW AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	5K-9090	[1]	SEAL-O-RING
	8T-6684	[1]	ELBOW
6.	4L-6454	[8]	BOLT (3/8-16X1-IN)
7.	5P-1075	[8]	WASHER-HARD (10.2X22.5X3-MM THK)
8.	6V-9746	[2]	SEAL-O-RING

#SEBP24010285

3G-9279: LINES GP-LIFT CYLINDER

LINES GP-LIFT CYLINDER

3G-9279 LINES GP-LIFT CYLINDER
S/N 3YP114-UP
PART OF 121-3330 BULLDOZER AR-STRAIGHT

i00165710 SEBP2401

3G9279 LINES GP-LIFT CYLINDER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	104-4459 C	[1]	TUBE AS
2.	3D-2824	[2]	SEAL-O-RING
3.	365-4629 I	[1]	HOSE AS
	365-4628 I	[1]	HOSE AS
4.	5C-6565 C	[2]	BOLT (1/2-13X1.125-IN)
	8T-4223 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	5K-9090 C	[2]	SEAL-O-RING
6.	6K-5535	[2]	CLIP (SLOT)
	6K-5536	[2]	CLIP (TAB)
7.	4J-0520	[2]	SEAL-O-RING
8.	9B-7237 C	[8]	BOLT (3/8-16X1.25-IN)
9.	6V-8714 C	[2]	CONNECTOR
10.	104-4457 C	[1]	TUBE AS
11.	8T-4896 C	[8]	WASHER-HARD (10.2X18.5X2.5-MM THK)
12.	1P-4577	[4]	FLANGE-HALF
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24010286

121-3187: LINES GP-PILOT

LINES GP-PILOT

121-3187 LINES GP-PILOT
S/N 9DM1-UP
PART OF 119-0400 HYDRAULIC AR

i00165939 SEBP2401

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-8724	[9]	ELBOW
2.	3J-1907	[13]	SEAL-O-RING
3.	6V-8397	[25]	SEAL-O-RING
4.	6Y-3290 I	[1]	HOSE AS
5.	6V-9836	[2]	TEE-SWIVEL
6.	2T-2266 I	[2]	HOSE AS
7.	4L-6454	[13]	BOLT (3/8-16X1-IN)
8.	8T-4896	[17]	WASHER-HARD (10.2X18.5X2.5-MM THK)
9.	8T-2501	[2]	BOLT (3/8-16X2-IN)
10.	092-6022 I	[1]	HOSE AS
11.	3P-9847	[1]	CLIP
12.	4I-5811 I	[1]	HOSE AS
13.	7K-1181	[2]	STRAP-CABLE
14.	8C-8988	[3]	ELBOW
15.	113-6378 I	[1]	HOSE AS
16.	6V-8398	[1]	SEAL-O-RING
17.	108-8101 I	[1]	HOSE AS
18.	9C-9598 I	[1]	HOSE AS
19.	4S-1962	[10]	CLIP (LOOP)
20.	7V-6571	[14]	GROMMET
21.	1U-2226 Y	[1]	VALVE GP-SELECTOR & PRESS CONT (PILOT)
22.	6V-8641	[1]	CONNECTOR
23.	4J-5477	[1]	SEAL-O-RING
24.	2Q-3163 I	[1]	HOSE AS
25.	6V-8936	[1]	REDUCER
26.	7I-3309	[1]	BRACKET AS
	1F-0750	[1]	NUT-WELD (3/8-16-THD)
	3T-0050	[3]	CLIP
	9G-9154	[1]	CLIP
27.	9C-2439	[1]	TUBE AS
28.	7I-3230 I	[1]	HOSE AS
29.	108-2937 I	[1]	HOSE AS
30.	8M-2773	[1]	CLIP (LOOP)
31.	124-4411	[1]	BRACKET AS
32.	8T-2335	[1]	ELBOW
33.	9T-4543	[1]	VALVE GP-CHECK
34.	123-5957	[1]	BRACKET AS
35.	135-5201	[4]	CLIP (3/8-16 THD)
36.	124-4410	[1]	BRACKET AS
37.	9T-3096 Y	[1]	VALVE GP-CHECK
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP24010287

121-3334: LINES GP-TILT & TIP CYLINDER

LINES GP-TILT & TIP CYLINDER

121-3334 LINES GP-TILT & TIP CYLINDER
S/N 9DM1-UP
PART OF 119-0400 HYDRAULIC AR

i00165942 SEBP2401

1213334 LINES GP-TILT & TIP CYLINDER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5K-9660	[4]	CLIP (LOOP)
2.	4L-6454	[4]	BOLT (3/8-16X1-IN)
3.	8T-4896	[20]	WASHER-HARD (10.2X18.5X2.5-MM THK)
4.	5C-6565	[4]	BOLT (1/2-13X1.125-IN)
5.	8T-4223	[4]	WASHER-HARD (13.5X25.5X3-MM THK)
6.	7K-7862	[4]	CLIP
7.	5K-0906	[2]	BOLT (5/16-18X0.625-IN)
8.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
9.	148-8327	[3]	CONNECTOR AS
			(EACH INCLUDES)
	3D-2824	[1]	SEAL-O-RING
	6V-8637	[1]	CONNECTOR
	6V-9746	[1]	SEAL-O-RING
10.	125-4495	[1]	TUBE AS
11.	125-4494	[1]	TUBE AS
12.	9V-7949	[2]	ANGLE AS
			(EACH INCLUDES)
	9F-2978	[1]	NUT-WELD (3/8-16-THD)
13.	5S-7379	[2]	BOLT (3/8-16X0.875-IN)
14.	4L-9337	[2]	BOLT (3/8-16X1.5-IN)
15.	125-4491	[4]	TUBE AS
16.	125-4500 I	[1]	HOSE AS
17.	125-4498 I	[1]	HOSE AS
18.	125-4502 I	[1]	HOSE AS
19.	125-4501 I	[1]	HOSE AS
20.	125-4499 I	[1]	HOSE AS
21.	125-4492	[1]	TUBE AS
22.	125-4493	[1]	TUBE AS
23.	148-8347	[1]	ELBOW AS
	3D-2824	[1]	SEAL-O-RING
	6V-9007	[1]	ELBOW
	6V-9746	[1]	SEAL-O-RING
25.	148-8359	[8]	ELBOW AS
			(EACH INCLUDES)
	3K-0360	[1]	SEAL-O-RING
	6V-9746	[1]	SEAL-O-RING
	6V-9877	[1]	ELBOW
27.	8J-5913 Y	[2]	VALVE GP-CHECK (PILOT OPERATED)
28.	8T-7008	[6]	BOLT (3/8-16X3-IN)
29.	6V-8801	[6]	NUT (3/8-16-THD)
30.	125-4503	[2]	PLATE
31.	148-8449	[2]	TEE AS-SWIVEL
			(EACH INCLUDES)
	6V-9746	[2]	SEAL-O-RING
	6V-9839	[1]	TEE-SWIVEL
32.	6V-9746	[4]	SEAL-O-RING
33.	160-6506	[2]	SPACER (12.52X17.14X17.5-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	Y		SEPARATE ILLUSTRATION

#SEBP24010288

3G-9272: LINES GP-TILT & TIP CYLINDER

LINES GP-TILT & TIP CYLINDER

3G-9272 LINES GP-TILT & TIP CYLINDER
S/N 3YP114-UP
PART OF 121-3330 BULLDOZER AR-STRAIGHT

i00165708 SEBP2401

3G9272 LINES GP-TILT & TIP CYLINDER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	1U-3576	[1]	GUARD AS (RH)
2.	8M-0505	[2]	ADAPTER
3.	5C-6565	[22]	BOLT (1/2-13X1.125-IN)
4.	8T-4223	[26]	WASHER-HARD (13.5X25.5X3-MM THK)
5.	3K-0360	[4]	SEAL-O-RING
6.	4J-7655	[4]	CLAMP-HOSE
7.	5S-7382	[4]	BOLT (3/8-16X1.375-IN)
8.	5P-2566	[4]	BOLT (1/2-13X1.5-IN)
9.	030-7948	[2]	ELBOW
10.	1U-0809	[2]	GUARD AS
11.	5J-1765	[1]	COVER AS
	5J-1766	[1]	COVER AS
12.	1U-0794 I	[2]	HOSE AS
13.	1U-0807 I	[2]	HOSE AS
14.	1U-4983	[1]	GUARD AS (LH)
15.	7K-7862 C	[2]	CLIP
16.	5K-0906	[2]	BOLT (5/16-18X0.625-IN)
	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	I		REFER TO HYDRAULIC INFORMATION SYSTEM

#SEBP24010289

7J-6779: MOUNTING GP-LIFT CYLINDER

MOUNTING GP-LIFT CYLINDER

7J-6779 MOUNTING GP-LIFT CYLINDER
S/N 3YP114-UP
PART OF 121-3330 BULLDOZER AR-STRAIGHT

i00165789 SEBP2401

7J6779 MOUNTING GP-LIFT CYLINDER Parts scheme

For full view, you need register

Parts for your 814F WHEEL DOZER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7X-0345	[4]	BOLT (5/8-11X1.75-IN)
2.	7X-0588	[16]	WASHER-HARD (17X27X3.5-MM THK)(3.5MM THK)
3.	7J-7265	[1]	RETAINER
4.	7J-4827	[1]	YOKE
5.	3J-2443	[2]	BEARING
6.	7X-0349	[4]	BOLT (5/8-11X3-IN)
7.	3B-8485	[2]	ELBOW
8.	2J-5812	[2]	CAP