AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

155-6413 WIRING GP-RELAY PANEL S/N 4SN425-UP PART OF 121-5627 WIRING GP-MACHINE 824G WHEEL DOZER


ELECTRICAL AND STARTING SYSTEM
WIRING GP
POWER TRAIN
AXLE GP
DIFFERENTIAL & BEVEL GEAR GP
TRANSMISSION GP

WHEEL DOZER 824G WHEEL DOZER 4SN
 824G Wheel Tractor 4SN00001-UP (MACHINE) POWERED BY 3406C Engine SEBP2404 824G 4SN   (1995)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-RELAY PANEL
115-6890 WIRING GP-RELAY PANEL
WIRING GP-RELAY PANEL
155-6413 WIRING GP-RELAY PANEL
WIRING GP-RELAY PANEL
155-6413 WIRING GP-RELAY PANEL
WIRING GP-SECONDARY STEERING
115-6878 WIRING GP-SECONDARY STEERING
 

#SEBP24040290
 

155-6413: WIRING GP-RELAY PANEL

155-6413 WIRING GP-RELAY PANEL
S/N 4SN425-UP
PART OF 121-5627 WIRING GP-MACHINE
i01092728 SEBP2404
1556413 WIRING GP-RELAY PANEL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-8782 [4] FUSE (10-AMPERE)  
2. 3S-2093 [2] STRAP-CABLE  
3. 3T-2662 [1] CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)  
    (RUNNING LAMP)
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
4. 4K-5122 [4] HOLDER AS-FUSE  
    (EACH INCLUDES)
  139-0178 [1] CAP  
5. 6T-3643 [1] CIRCUIT BREAKER AS (15-AMPERE)  
    (ENGINE SHUTDOWN)
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
6. 6N-9349 [1] CIRCUIT BREAKER AS (30-AMPERE)  
    (TILT HOOD ACTUATOR)
  6V-8376 [2] SCREW-MACHINE (8-32X0.25-IN)  
  9B-7233 [2] LOCKWASHER  
7. 7K-1181 [1] STRAP-CABLE  
8. 7V-9275 [1] STRAP  
9. 8R-7933 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3612 M [2] NUT-WELD (M8X1.25-THD)  
10. 9G-4360 [1] CAP-CONNECTOR  
11. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(ALTERNATOR)  
  1H-3244 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 167-0138 CY [1] SWITCH GP-MAGNETIC (24-VOLT)(MAIN POWER RELAY)  
13. 114-0931 [1] FILM-IDENTIFICATION (SERVICE CONNECTOR)  
14. 116-5894 [1] PLATE-INSTRUCTION  
15. 116-5895 [1] PLATE-INSTRUCTION  
16. 116-5896 [1] PLATE-IDENTIFICATION (ALTERNATOR, MAIN BREAKERS)  
17. 125-1302 [1] SWITCH GP-MAGNETIC (24-VOLT)(START RELAY)  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES WEDGE)
  3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
  5C-2890 M [2] NUT (M6X1-THD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9X-1386 [16] SLEEVE  
18. 149-2612 [1] RELAY AS (24-VOLT)(TILT HOOD)  
  8T-8729 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  9W-0852 [4] PIN-CONNECTOR (14-GA TO 16-GA)  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES WEDGE)
19. 150-6643 [1] PLATE AS  
  6V-9632 M [5] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
20. 155-6356 [1] HARNESS AS-PANEL (RELAY)  
21. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
22. 4B-4863 [6] WASHER (4.7X11X1.2-MM THK)  
23. 5C-9553 M [7] BOLT (M6X1X16-MM)  
24. 5L-4507 [4] SCREW-MACHINE (10-32X0.875-IN)  
25. 5M-6668 [6] SCREW-MACHINE (8-32X0.75-IN)  
26. 6V-1889 [2] CLIP (LOOP)  
27. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
28. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
29. 8T-4189 M [2] BOLT (M8X1.25X20-MM)  
30. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
31. 9X-8256 [7] WASHER (6.6X12X2-MM THK)  
32. 171-2210 [1] CIRCUIT BREAKER AS (80-AMPERE)(MAIN)  
  1H-3244 [2] LOCKWASHER  
  6V-8187 [2] NUT (1/4-28-THD)  
  8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24040291
 

115-6878: WIRING GP-SECONDARY STEERING

115-6878 WIRING GP-SECONDARY STEERING
S/N 4SN1-UP
PART OF 116-7191 STEERING AR-SECONDARY
i00166277 SEBP2404
1156878 WIRING GP-SECONDARY STEERING Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6450 [1] SWITCH AS-PRESSURE (SECONDARY STEERING)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  3E-3371 [1] WEDGE-RECEPTACLE LOCK (3-PIN)  
  8T-8729 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
2. 3S-2093 [1] STRAP-CABLE  
3. 115-5884 [1] HARNESS AS-STEERING (SECONDARY)  
4. 119-4604 [1] CLIP AS-CONNECTING  
5. 3K-0360 [1] SEAL-O-RING  
6. 5P-9085 [1] CLIP (LOOP)  
7. 6V-2383 [1] CLIP  
 

#SEBP24040292
 

112-8013: AXLE AR-FIXED

112-8013 AXLE AR-FIXED
S/N 4SN1-UP
PART OF 113-5419 POWER TRAIN AR
i01268664 SEBP2404
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  108-0062 Y [1] AXLE GP-FIXED  
  108-0067 Y [2] BRAKE GP-SERVICE  
    S/N 4SN1-451
  195-8773 Y [2] BRAKE GP-SERVICE  
    S/N 4SN452-UP
  112-4068 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
    S/N 4SN1-326
  112-4067 Y [1] DIFFERENTIAL & BEVEL GEAR GP (FIXED AXLE)  
    S/N 4SN327-451
  195-9715 Y [1] DIFFERENTIAL & BEVEL GEAR GP (FIXED AXLE)  
    S/N 4SN452-UP
  124-3758 Y [1] LINES GP-SERVICE BRAKE  
  108-0066 Y [2] WHEEL & FINAL DRIVE GP  
    S/N 4SN1-451
  160-5585 Y [2] WHEEL & FINAL DRIVE GP  
    S/N 4SN452-UP
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24040293
 

112-8015: AXLE AR-OSCILLATING

112-8015 AXLE AR-OSCILLATING
S/N 4SN1-UP
PART OF 113-5419 POWER TRAIN AR
i01955665 SEBP2404
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  108-0061 Y [1] AXLE GP-OSCILLATING  
  108-0067 Y [2] BRAKE GP-SERVICE  
    -OR-
  195-8773 Y [2] BRAKE GP-SERVICE  
  112-4068 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
    -OR-
  195-9751 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
    -OR-
  188-7184 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
  124-3758 Y [1] LINES GP-SERVICE BRAKE  
  108-0066 Y [2] WHEEL & FINAL DRIVE GP  
    S/N 4SN1-451
  160-5585 Y [2] WHEEL & FINAL DRIVE GP  
    S/N 4SN452-UP
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24040294
 

124-3753: AXLE AR-OSCILLATING

124-3753 AXLE AR-OSCILLATING -REAR
S/N 4SN1-UP
i01659406 SEBP2404
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  108-0061 Y [1] AXLE GP-OSCILLATING  
  108-0067 Y [2] BRAKE GP-SERVICE  
    S/N 4SN1-507
  195-8773 Y [2] BRAKE GP-SERVICE  
    S/N 4SN508-UP
  124-3757 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
    -OR-
  195-9716 Y [1] DIFFERENTIAL & BEVEL GEAR GP (OSCILLATING AXLE)  
  124-3758 Y [1] LINES GP-SERVICE BRAKE  
  108-0066 Y [2] WHEEL & FINAL DRIVE GP  
    -OR-
  160-5585 Y [2] WHEEL & FINAL DRIVE GP  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24040295
 

108-0062: AXLE GP-FIXED

108-0062 AXLE GP-FIXED -FRONT
S/N 4SN1-UP
PART OF 112-8013 AXLE AR-FIXED
i00166177 SEBP2404
1080062 AXLE GP-FIXED Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-4637 [1] HOUSING AS-FIXED  
2. 105-8727 [2] SHAFT-AXLE  
3. 6V-8128 [2] RING-RETAINING  
4. 8T-0666 M [48] BOLT (M24X3X90-MM)  
5. 5P-6604 [48] WASHER-HARD (25.4X40X5-MM THK)  
6. 9S-4181 [1] PLUG (1-5/16-12-THD)  
7. 7M-8485 [4] SEAL-O-RING  
8. 5P-4484 [1] PLUG-MAGNETIC  
9. 149-8220 [1] FITTING-PRESSURE RELIEF  
10. 5P-4483 [2] PLUG  
  M   METRIC PART
 

#SEBP24040296
 

108-0061: AXLE GP-OSCILLATING

108-0061 AXLE GP-OSCILLATING -REAR
S/N 4SN1-UP
PART OF 112-8015, 124-3753 AXLE AR-OSCILLATING
i00166176 SEBP2404
1080061 AXLE GP-OSCILLATING Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-6853 [2] FITTING-PRESSURE RELIEF  
2. 105-8704 [1] SUPPORT-TRUNNION (FRONT)  
3. 105-8727 [2] SHAFT-AXLE  
4. 6V-8128 [2] RING-RETAINING  
5. 105-8703 [1] SUPPORT-TRUNNION (REAR)  
6. 104-7006 [4] DOWEL-HOLLOW  
7. 8T-0666 M [48] BOLT (M24X3X90-MM)  
8. 5P-6604 [48] WASHER-HARD (25.4X40X5-MM THK)  
9. 9S-4185 [1] PLUG (3/4-16-THD)  
10. 3K-0360 [1] SEAL-O-RING  
11. 9S-4181 [1] PLUG (1-5/16-12-THD)  
12. 7M-8485 [2] SEAL-O-RING  
13. 105-8705 [1] COVER  
14. 109-3202 [1] PLATE-THRUST  
15. 105-8753 [2] BEARING-THRUST  
16. 105-8754 [1] BUSHING  
17. 5P-4484 [1] PLUG-MAGNETIC  
18. 105-8739 [1] BUSHING  
19. 1M-9011 [2] RING-TORIC  
20. 8T-0336 [1] FITTING-PRESSURE RELIEF  
21. 195-9644 [1] HOUSING-AXLE  
22. 2D-6533 [1] SEAL-O-RING  
23. 105-8702 [1] TRUNNION  
24. 6V-3532 M [36] BOLT (M20X2.5X60-MM)  
25. 5P-8248 [26] WASHER-HARD (20X36.5X3.5-MM THK)  
26. 4M-0660 [1] RING-SEALING  
27. 6V-6640 B SEALANT  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24040297
 

173-0545: CARRIER GP-DIFFERENTIAL

173-0545 CARRIER GP-DIFFERENTIAL
S/N 4SN365-UP
PART OF 112-4068, 188-7184 DIFFERENTIAL & BEVEL GEAR GP
i02608886 SEBP2404
1730545 CARRIER GP-DIFFERENTIAL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8132 M [2] BOLT (M24X3X120-MM)  
2. 6V-8237 [2] WASHER (26X44X4-MM THK)  
3. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
4. 9X-8399 [2] WASHER (33X56X6-MM THK)  
5. 9S-4181 [1] PLUG (1-5/16-12-THD)  
6. 7M-8485 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP24040298
 

195-9709: CARRIER GP-DIFFERENTIAL

195-9709 CARRIER GP-DIFFERENTIAL
S/N 4SN1-UP
PART OF 195-9715, 195-9716, 195-9751 DIFFERENTIAL & BEVEL GEAR GP
i01510140 SEBP2404
1959709 CARRIER GP-DIFFERENTIAL Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-8132 M [2] BOLT (M24X3X120-MM)  
2. 6V-8237 [2] WASHER (26X44X4-MM THK)  
3. 8T-0370 M [2] BOLT (M30X3.5X140-MM)  
4. 9X-8399 [2] WASHER (33X56X6-MM THK)  
5. 9S-4181 [1] PLUG (1-5/16-12-THD)  
6. 7M-8485 [1] SEAL-O-RING  
  M   METRIC PART
 

#SEBP24040299
 

112-7876: CASE & PARTS GP-PLANETARY

112-7876 CASE & PARTS GP-PLANETARY
S/N 8ZX1-UP
PART OF 112-3168 TRANSMISSION AR
i00166222 SEBP2404
1127876 CASE & PARTS GP-PLANETARY Parts scheme
  For full view, you need register

Parts for your 824G WHEEL DOZER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-9086 [1] GASKET  
2. 8E-4929 [1] GASKET  
3. 9S-1018 [12] WASHER (9.73X19.05X0.84-MM THK)  
4. 9S-4191 [2] PLUG (9/16-18-THD)  
5. 3J-1907 [2] SEAL-O-RING  
6. 3S-0004 [6] WASHER (0.406X0.728X0.09-IN THK)  
7. 4D-3704 [2] WASHER-HARD (17X30X5-MM THK)  
8. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 129-7585 C [1] COVER AS  
10. 1F-0750 [6] NUT-WELD (3/8-16-THD)  
11. 5P-3494 [1] BOSS-PIPE  
12. 8M-4992 [2] SEAL-O-RING  
13. 5P-2587 [1] SEAL-O-RING  
14. 164-6877 [2] ELBOW AS  
    (EACH INCLUDES)
  030-7947 [1] ADAPTER-ELBOW  
  3J-1907 [1] SEAL-O-RING  
15. 9S-4183 [1] PLUG (1-1/16-12-THD)  
16. 3D-2824 [1] SEAL-O-RING  
17. 0T-0065 [3] BOLT (3/8-16X3.5-IN)  
18. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
19. 7B-1597 [1] CLIP  
20. 6T-6790 [1] TUBE AS  
21. 0L-1351 [16] BOLT (3/8-16X0.875-IN)  
22. 0S-1587 [2] BOLT (1/2-13X1.75-IN)  
23. 5P-8245 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 8E-4928 [1] COVER  
25. 0S-1566 [2] BOLT (5/8-11X1.5-IN)  
26. 0S-1608 [10] BOLT (3/8-16X3.75-IN)  
27. 9G-5127 [1] BREATHER (ATMOSPHERIC)  
28. 106-3519 [1] CASE AS-TRANSMISSION  
29. 1A-2223 [2] DOWEL  
30. 6T-6898 [1] MANIFOLD  
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Caterpillar Parts SIS Catalog 824G :

WIRING GP-RELAY PANEL
155-6413 WIRING GP-RELAY PANEL
WIRING GP-RELAY PANEL
115-6890 WIRING GP-RELAY PANEL
WIRING GP-REAR
116-7332 WIRING GP-REAR
WIRING GP-MACHINE
121-5627 WIRING GP-MACHINE
WIRING GP-MACHINE
121-5627 WIRING GP-MACHINE
WIRING GP-MACHINE
121-5627 WIRING GP-MACHINE
WIRING GP-MACHINE
121-5627 WIRING GP-MACHINE
WIRING GP-MACHINE
121-5627 WIRING GP-MACHINE
WIRING GP-SECONDARY STEERING
115-6878 WIRING GP-SECONDARY STEERING
112-8013 AXLE AR-FIXED
112-8015 AXLE AR-OSCILLATING
124-3753 AXLE AR-OSCILLATING
AXLE GP-FIXED
108-0062 AXLE GP-FIXED
AXLE GP-OSCILLATING
108-0061 AXLE GP-OSCILLATING
CARRIER GP-DIFFERENTIAL
173-0545 CARRIER GP-DIFFERENTIAL
CARRIER GP-DIFFERENTIAL
195-9709 CARRIER GP-DIFFERENTIAL

Truck sale:

Caterpillar 824G, , Bau-Und Bergbauausrüstung
93,505 USD 
Caterpillar 824G, , Bau-Und Bergbauausrüstung
- Dozers
ZEPPELIN BAUMASCHINEN
Germany
CATERPILLAR 824G 1999
 
CATERPILLAR 824G 1999
- WHEEL DOZERS
ZEPPELIN BAUMASCHINEN
Gebrauchtmaschinen Pool Karl-Bröger-Strasse 8 - Alsfeld
2004 CAT 824G
USD $112,742 
2004 CAT 824G

BIG MACHINERY BV
Velddriel, The Netherlands
2004 CAT 824G
USD $112,207 
2004 CAT 824G

BIG MACHINERY BV
Velddriel, The Netherlands
1996 CAT 824G
USD $250,000 
1996 CAT 824G

SUKUT EQUIPMENT & PARTS
San Bernardino, California
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.