COOLING SYSTEM
PUMP GP-WATERRADIATOR GP
COOLING SYSTEM
PUMP GP-WATER#SEBP24120140
2W-8006: PUMP GP-WATER
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 2. | 8N-5928 | [1] | GASKET | |
| 3. | 4W-3864 | [1] | SEAL AS-WATER PUMP | |
| 4. | 1B-3867 | [1] | BALL BEARING | |
| 5. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 6. | 8C-5210 | [1] | SEAL-LIP TYPE | |
| 7. | 1K-6985 | [1] | RING-RETAINING | |
| 8. | 6K-3771 | [1] | BOLT-12 POINT HEAD (7/16-14X1.5-IN) | |
| 9. | 6H-3957 | [1] | BALL BEARING | |
| 10. | 2W-7679 | [1] | GEAR AS (40-TEETH) | |
| 11. | 3K-6113 | [1] | WASHER-HARD (12X18.5X3-MM THK) | |
| 12. | 2W-7255 | [1] | SHAFT-WATER PUMP | |
| 13. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 14. | 1W-6557 | [1] | HOUSING-PUMP | |
| 15. | 0S-1594 | [1] | BOLT (3/8-16X1-IN) | |
| 16. | 8N-5929 | [1] | COVER-WATER PUMP | |
| 17. | 134-7422 | [1] | IMPELLER-PUMP | |
| 18. | 4N-5834 C | [1] | FILTER-FOAM (WATER PUMP HOUSING) | |
| 19. | 9X-6458 | [1] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP24120141
7N-6210: PUMP GP-WATER
7N-6210 PUMP GP-WATER
S/N 07Y4279-6701
S/N 07Y4279-6701
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120142
7N-6210: PUMP GP-WATER
7N-6210 PUMP GP-WATER
S/N 07Y6702-7162
S/N 07Y6702-7162
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120143
7N-6210: PUMP GP-WATER
7N-6210 PUMP GP-WATER
S/N 07Y7163-UP
S/N 07Y7163-UP
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120144
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 07Y4279-UP
Type 1
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 07Y4279-UP
Type 1
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120145
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 07Y4279-UP
Type 2
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 07Y4279-UP
Type 2
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120146
8N-4252: PUMP GP-WATER
8N-4252 PUMP GP-WATER
S/N 07Y4279-UP
Type 3
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
S/N 07Y4279-UP
Type 3
FOR USE WITH 8N-1912 LINES GP-WATER
AN ATTACHMENT
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS#SEBP24120147
107-9346: RADIATOR GP
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1595 | [1] | BOLT (1/2-13X1.25-IN) | |
| 2. | 9M-7959 | [6] | CLAMP-HOSE | |
| 3. | 3N-6036 | [1] | HOSE | |
| 4. | 0T-0102 | [2] | BOLT (3/8-16X0.625-IN) | |
| 5. | 107-9345 | [1] | BRACE | |
| 6. | 2N-0256 | [1] | RADIATOR GP | |
| 7. | 6L-8617 | [1] | CAP-PRESSURE (7-PSI) | |
| 8. | 0L-1351 C | [8] | BOLT (3/8-16X0.875-IN) | |
| 9. | 9M-5733 | [24] | RIVET-POP | |
| 10. | 2A-4639 | [6] | BOLT (3/8-16X1.625-IN) | |
| 11. | 2L-4238 | [6] | MOUNT-FLEXIBLE | |
| 12. | 0S-1594 C | [8] | BOLT (3/8-16X1-IN) | |
| 13. | 6N-8863 | [14] | WASHER (10.2X32X2.5-MM THK) | |
| 14. | 8L-4495 | [1] | SHELL AS-RADIATOR | |
| 15. | 9F-2978 | [6] | NUT-WELD (3/8-16-THD) | |
| 16. | 8L-4534 | [1] | GUARD-RADIATOR | |
| 17. | 0S-0509 | [8] | BOLT (3/8-16X0.75-IN) | |
| 18. | 2W-5643 C | [1] | GUARD AS-FAN (UPPER) | |
| 8N-1633 C | [1] | GUARD AS-FAN (LOWER) | ||
| 19. | 3H-3338 | [1] | TUBE | |
| 20. | 5P-1262 E | HOSE (15.24CM 6IN) | ||
| 21. | 1B-5174 | [1] | PLUG-PIPE | |
| 22. | 4L-2922 | [1] | SUPPORT AS | |
| 23. | 4L-2921 | [1] | SUPPORT AS | |
| 24. | 0S-1592 | [4] | BOLT (5/8-11X1.25-IN) | |
| 25. | 5P-8245 C | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 3N-2669 | [1] | ELBOW | |
| 27. | 3N-6033 | [1] | HOSE-PUMP INLET | |
| 28. | 5M-2894 C | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 29. | 0S-1585 | [1] | BOLT (1/2-13X1.5-IN) | |
| 7N-2597 | [1] | SPACER (13.5X25.4X8.08-MM THK) | ||
| 30. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
#SEBP24120148
107-9346: RADIATOR GP
Parts for your G3306 GAS ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 337-6913 | [1] | SUPPORT AS | |
| 2. | 7X-0343 | [4] | BOLT (5/8-11X1.25-IN) | |
| 3. | 4L-7893 B | [4] | SHIM (0.598-IN THK) | |
| 4. | 337-6912 | [1] | SUPPORT AS | |
| 5. | 5S-7379 B | [8] | BOLT (3/8-16X0.875-IN) | |
| 6. | 8T-4896 B | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 7. | 8L-4495 | [1] | SHELL AS-RADIATOR | |
| 1F-0750 | [12] | NUT-WELD (3/8-16-THD) | ||
| [2] | PLATE | |||
| 8. | 133-9673 CY | [1] | RADIATOR GP | |
| 9. | 2L-4238 | [6] | MOUNT-FLEXIBLE | |
| 10. | 9M-5733 | [24] | RIVET-POP | |
| 11. | 7X-0288 | [6] | BOLT (3/8-16X1.625-IN) | |
| 12. | 8T-4896 | [8] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 13. | 8L-4534 | [1] | GUARD-RADIATOR | |
| 14. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 15. | 7X-0578 | [14] | WASHER-HARD (10.2X32X2.5-MM THK) | |
| 17. | 2W-5643 | [1] | GUARD AS-FAN (UPPER) | |
| 18. | 8N-1633 | [1] | GUARD AS-FAN (LOWER) | |
| 6N-8599 | [2] | CLIP | ||
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 19. | 133-6518 C | [1] | HOSE-RADIATOR (LOWER) | |
| 20. | 9M-7959 C | [4] | CLAMP-HOSE | |
| 21. | 5M-3062 | [8] | BOLT (3/8-16X0.75-IN) | |
| 22. | 107-9345 | [1] | BRACE | |
| 23. | 5P-8167 | [2] | BOLT (3/8-16X0.625-IN) | |
| 24. | 8N-5474 | [1] | HOSE-RADIATOR (UPPER) | |
| 25. | 6C-3241 | [1] | BOLT (1/2-13X1.5-IN) | |
| 26. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 27. | 8T-8917 | [1] | BOLT (1/2-13X1.25-IN) | |
| 28. | 7X-7737 | [1] | SPACER (13.5X25.4X8.08-MM THK) | |
| 29. | 5P-1075 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 30. | 003-2143 | [2] | ELBOW | |
| 31. | 004-6683 | [1] | FITTING | |
| 32. | 129-1090 | [1] | VALVE-DRAIN | |
| 33. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP24120149
133-9673: RADIATOR GP
Parts for your G3306 GAS ENGINE:
CATERPILLAR SISInformation:
COOLING SYSTEM
PUMP GP-WATER
Engine News
Replacement Seal Group For Water Pump Impeller Now Has All The Seal Parts Plus An Installation Tool
1978/03/01
1978/03/01
Operation and Maintenance Manual
Special Instruction
Service Letter-NACD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Australia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CFEL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-CSARL
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Americas
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Brazil
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Truck/Ag/Marine
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Technical Information Bulletin
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Remanufacturing Water Pumps For The 3300 Family Of Engines
Specifications
Service Letter-China
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Service Letter-Asia
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Information Release Memo
Service Letter-APD
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
Water Pumps In Parts Stock Need To Have The Coolant Seals Replaced And Certain Seals Need To Be Removed From Stock
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
The Plastic Impeller Needs To Be Removed From Certain Water Pumps In Parts Stock And Replaced With A Cast Iron Impeller.
Disassembly and Assembly
Service Magazine



