AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-1589 GOVERNOR GP S/N 07Y4279-UP 24 VOLT, DC PART OF 1W-1634 GOVERNOR GP AN ATTACHMENT G3306 GAS ENGINE


FUEL SYSTEM
GOVERNOR GP
CONTROL GP-GOVERNOR
CONTROL GP-FUEL RATIO
REGULATOR GP-GAS PRESSURE

GAS ENGINE G3306 GAS ENGINE 07Y
 G3306 ENGINE 07Y04279-UP SEBP2412 G3306 07Y   (1978)

FUEL SYSTEM

GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP
7N-2375 GOVERNOR GP
GOVERNOR GP
9Y-1589 GOVERNOR GP
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
 

#SEBP24120260
 

9Y-1589: GOVERNOR GP

9Y-1589 GOVERNOR GP
S/N 07Y4279-UP
24 VOLT, DC
PART OF 1W-1634 GOVERNOR GP
AN ATTACHMENT
i00438257 SEBP2412
9Y1589 GOVERNOR GP Parts scheme 9Y1589 GOVERNOR GP Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-5123 [1] MOTOR AS  
  7N-7779 [1] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  7N-7780 [1] PIN-CONNECTOR (14-GA TO 18-GA)  
  7N-9738 [1] HOUSING-RECEPTACLE (14-GA TO 18-GA)  
2. 9N-6225 [4] SCREW (6-32X47.625-MM)  
  9B-1117 [4] LOCKWASHER  
3. 5N-3909 [1] CLUTCH AS  
4. 5H-6618 [5] SCREW-MACHINE  
  8F-1434 [5] LOCKWASHER  
5. 2F-2293 [1] GASKET-COVER  
6. 5N-3886 [1] SCREW (10-32X1.5-IN)  
7. 7N-6052 [1] SPRING AS-SPEED  
8. 6L-3996 [1] SEAT-SPRING  
9. 7N-4533 [1] BEARING-THRUST  
10. 9Y-1799 [1] BALL HEAD AS  
11. 6L-4003 [1] BUSHING  
12. 9Y-1987 [1] SEAL  
13. 6L-3994 [1] PLUNGER-VALVE  
14. 8N-3834 [1] BUSHING  
15. 6L-3983 [1] GEAR-IDLER (10-TEETH)(10 TEETH)  
16. 6L-3995 [1] SEAT-SPRING  
17. 7L-3107 [1] BASE AS-GOVERNOR  
18. 7W-3625 [2] SPRING-BUFFER  
19. 6L-3997 [1] PISTON-BUFFER  
20. 5N-3912 [1] CASE AS  
21. 3N-5727 [1] PISTON-POWER  
22. 3N-5728 [1] STRUT-SERVO  
23. 3N-5729 [1] SEAT-SPRING  
24. 3N-5723 [1] SPRING  
25. 1W-4911 [1] COVER  
26. 5N-3891 [2] WASHER  
27. 5N-3887 [1] PIN  
28. 6N-7530 [1] PIN-PIVOT  
29. 1W-4892 [1] LEVER AS  
30. 6L-4007 [1] VALVE AS-RELIEF  
31. 6F-3480 [1] SLEEVE AS-ADJUSTMENT  
32. 2N-1894 [1] PIN-SPRING  
33. 5N-3915 [1] LINK AS  
34. 5N-3890 [1] SHAFT-SPEED ADJUSTMENT  
35. 5N-3885 [1] LINK-SPEED DROOP  
36. 5N-4111 [1] SPACER (0.192X0.249X0.137-IN THK)  
37. 5N-3892 [1] BRACKET  
38. 3K-6168 [1] BOLT-SOCKET HEAD (10-32X0.625-IN)  
39. 3B-4502 [1] LOCKWASHER  
40. 5N-3916 [1] SLEEVE AS-ADJUSTMENT  
41. 5N-3913 [1] LEVER  
42. 5N-3911 [1] SHAFT AS-DROOP  
43. 4B-2043 [1] NUT (8-32-THD)  
44. 5N-3883 [1] SCREW-DROOP ADJUSTMENT  
45. 6L-9838 [2] SHAFT-TERMINAL  
46. 1N-3316 [3] SEAL-OIL  
47. 5N-4112 [1] SPRING-TORSION  
48. 5N-3884 [2] BLOCK-SPEED DROOP SLIDER  
49. 5N-3889 [1] VALVE-NEEDLE  
50. 9Y-1220 [2] PLUG  
51. 2W-0224 [2] SEAL-O-RING  
52. 5N-3908 [1] PLUG  
   
    AVAILABLE REPAIR KIT(S):
  7N-6807 [1] KIT-HARDWARE  
 

#SEBP24120261
 

4W-8180: GOVERNOR GP-ELECTRONIC

4W-8180 GOVERNOR GP-ELECTRONIC
S/N 5CA1-UP; 5DA1-UP; 5EA1-UP; 07Y4279-UP
PART OF 4P-4898, 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380400 SEBP2412
4W8180 GOVERNOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-5453 [1] CONTROL AS-ELECTRONIC GOVERNOR  
2. 4W-5971 [1] POTENTIOMETER (100-OHM)(ENGINE SPEED CONTROL)  
3. 4W-5972 [1] KNOB (ENGINE SPEED CONTROL)  
4. 7T-0037 [1] FUSE (0.75-AMPERE)  
5. 4W-8790 [1] BLOCK-FUSE  
 

#SEBP24120262
 

4W-8185: GOVERNOR GP-ELECTRONIC

4W-8185 GOVERNOR GP-ELECTRONIC
S/N 5CA1-UP; 5DA1-UP; 5EA1-UP; 07Y4279-UP
WITH PREREGULATOR
PART OF 4P-4898, 7W-0700 PANEL AR-CONTROL
FOR USAGE REFER TO CHART @@@@@ 4W-8000@@@@@
AN ATTACHMENT
i00380405 SEBP2412
4W8185 GOVERNOR GP-ELECTRONIC Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 131-5453 [1] CONTROL AS-ELECTRONIC GOVERNOR  
2. 4W-5391 [1] BOX AS-GOVERNOR PREREGULATOR  
  7T-0037 [3] FUSE (0.75-AMPERE)  
3. 4W-5971 [1] POTENTIOMETER (100-OHM)(ENGINE SPEED CONTROL)  
4. 4W-5972 [1] KNOB (ENGINE SPEED CONTROL)  
 

#SEBP24120263
 

170-1812: MOUNTING GP-GOVERNOR CONTROL

170-1812 MOUNTING GP-GOVERNOR CONTROL
S/N 07Y4279-UP
AN ATTACHMENT
i01175939 SEBP2412
1701812 MOUNTING GP-GOVERNOR CONTROL Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 170-1814 [1] LEVER AS  
2. 170-1815 [1] BRACKET  
3. 170-1816 [1] BRACKET AS  
4. 1H-5514 [3] BOLT (5/16-18X1.625-IN)  
5. 2H-3755 [2] BOLT (5/16-18X0.43-IN)  
6. 5P-0537 [10] WASHER-HARD (7.2X14.5X2-MM THK)  
7. 9M-1974 [6] WASHER-HARD (8.8X16X2-MM THK)  
8. 2D-6235 [2] LOCKNUT (1/4-20-THD)  
9. 7L-4186 [2] ROD END  
10. 2A-5546 [1] BOLT (1/4-20X1.375-IN)  
11. 9L-0383 [1] ROD-CONTROL  
12. 5H-1351 [1] PIN-SPRING  
13. 1B-2713 [1] BOLT (1/4-20X1.75-IN)  
14. 4F-2294 [2] NUT-JAM (5/16-24-THD)  
15. 1D-4540 [1] BOLT (5/16-18X2.75-IN)  
16. 4D-3088 [1] WASHER (0.266X0.438X0.19-IN THK)  
17. 061-8005 [1] SPACER (9.25X13.72X16-MM)  
18. 0S-1615 [4] BOLT (1/4-20X0.75-IN)  
 

#SEBP24120264
 

234-4356: MOUNTING GP-GOVERNOR CONTROL

234-4356 MOUNTING GP-GOVERNOR CONTROL
S/N 07Y4279-UP
HYDRA-MECHANICAL
FOR USE WITH SI GOVERNOR AS
AN ATTACHMENT
i01982121 SEBP2412
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [2] BOLT (5/8-11X1.75-IN)  
  3B-1915 [3] BOLT (3/8-16X1.375-IN)  
  6B-5072 [1] ADAPTER  
  5P-3426 [1] ELBOW  
  6K-1972 [1] ELBOW-FLARED  
  2P-0220 [1] GASKET-PUMP  
  3J-7354 [1] SEAL-O-RING  
  7N-3093 [1] TUBE AS  
 

#SEBP24120265
 

234-4357: MOUNTING GP-GOVERNOR CONTROL

234-4357 MOUNTING GP-GOVERNOR CONTROL
S/N 07Y4279-UP
HYDRA-MECHANICAL
FOR USE WITH SI GOVERNOR AS
AN ATTACHMENT
i01982100 SEBP2412
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  0S-1589 [2] BOLT (5/8-11X1.75-IN)  
  3B-1915 [3] BOLT (3/8-16X1.375-IN)  
  5P-3426 [1] ELBOW  
  6K-1972 [1] ELBOW-FLARED  
  2P-0220 [1] GASKET-PUMP  
  3J-7354 [1] SEAL-O-RING  
  7N-3093 [1] TUBE AS  
 

#SEBP24120266
 

154-9638: REGULATOR AS-GAS PRESSURE

154-9638 REGULATOR AS-GAS PRESSURE
S/N 07Y4279-UP
PART OF 132-1152 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT AND FIELD INSTALLATION
i00940002 SEBP2412
1549638 REGULATOR AS-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6L-7148 [1] STEM AS-VALVE  
  6L-7149 [1] PIN  
2. 7W-6116 [1] BODY-REGULATOR  
3. 2B-7408 [1] PLUG-PIPE  
4. 6L-7155 [2] SCREW-MACHINE (1/4-20X0.5-IN)  
5. 6L-7147 [1] PIN  
6. 6L-7153 [1] GASKET  
7. 6L-7152 [1] BOLT (1/4-28X0.625-IN)  
8. 6L-7145 [1] POST-PUSHER  
9. 6L-7146 [1] LEVER  
10. 6L-7144 [2] HEAD-DIAPHRAGM  
11. 6L-7143 [1] DIAPHRAGM  
12. 6V-8186 [12] NUT-FULL (5/16-24-THD)  
13. 6L-7156 [12] BOLT (5/16-24X1.25-IN)  
14. 6L-7142 [1] SEAT-SPRING  
15. 7W-2737 [1] SCREW-ADJUSTMENT  
16. 154-9637 [1] ORIFICE  
17. 6L-7141 [1] GASKET  
18. 9Y-8796 [1] CAP-PRESSURE REGULATING  
  2H-3933 [1] SEAL-O-RING  
19. 6L-7154 [1] SEAT-SPRING  
20. 6L-7140 [1] SPRING  
  7N-2388 [1] SPRING  
21. 6L-9260 [1] HOLDER AS  
22. 1H-8720 [1] SEAL-O-RING  
23. 6L-7157 [2] BOLT (7/16-14X3.75-IN)  
 

#SEBP24120267
 

525-8844: REGULATOR AS-GAS PRESSURE

525-8844 REGULATOR AS-GAS PRESSURE
S/N 07Y4279-UP
PART OF 132-1152 REGULATOR GP-GAS PRESSURE
AN ATTACHMENT
i07287889 SEBP2412
5258844 REGULATOR AS-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP24120268
 

110-4913: REGULATOR GP-GAS PRESSURE

110-4913 REGULATOR GP-GAS PRESSURE
S/N 07Y4279-UP
GAS PRESSURE
AN ATTACHMENT
i00470766 SEBP2412
1104913 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-6022 [1] REGULATOR-PRESSURE (GAS)  
2. 110-4911 [1] BRACKET AS  
3. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
4. 1H-5514 [1] BOLT (5/16-18X1.625-IN)  
5. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
6. 5S-0003 [1] NUT (5/16-18-THD)  
7. 9S-4200 [1] CLIP  
8. 7D-8793 [1] ELBOW-FLARED  
9. 003-9163 [1] ELBOW  
10. 2D-2460 [1] NIPPLE-PIPE  
11. 7L-4224 [1] JOINT AS-TUBE  
  3N-2723 [2] SEAL  
12. 7B-2742 [3] BOLT (1/4-20X1.25-IN)  
13. 5P-0537 [3] WASHER-HARD (7.2X14.5X2-MM THK)  
14. 9S-8750 [3] NUT-FULL (1/4-20-THD)  
15. 6S-2289 [1] TEE  
16. 6V-7538 [1] ELBOW-PIPE  
17. 7W-5098 [1] FITTING AS  
18. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
19. 2W-8721 [1] FITTING  
20. 8S-4950 [1] CAP (FLARED 37-DEG)  
21. 2W-8483 [1] BRACE  
22. 117-4038 [1] TUBE AS-BALANCE  
23. 0S-1618 [2] BOLT (5/16-18X1-IN)  
24. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
25. 163-3392 [1] FITTING  
26. 8L-5423 [1] SPACER (0.406X1X0.712-IN THK)  
27. 2W-8484 [1] BRACKET  
 

#SEBP24120269
 

132-1152: REGULATOR GP-GAS PRESSURE

132-1152 REGULATOR GP-GAS PRESSURE
S/N 07Y4279-UP
Type 1
AN ATTACHMENT
i00921546 SEBP2412
1321152 REGULATOR GP-GAS PRESSURE Parts scheme
  For full view, you need register

Parts for your G3306 GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 132-1148 [1] BRACKET AS  
2. 154-9638 Y [1] REGULATOR AS-GAS PRESSURE  
3. 0S-1589 [2] BOLT (5/8-11X1.75-IN)  
4. 5P-8247 [2] WASHER-HARD (17X32X3.5-MM THK)  
5. 6B-1628 [1] BUSHING-REDUCER  
6. 5P-4495 [1] TEE-FLARED  
7. 8S-4951 [1] CAP (FLARED)  
8. 6L-9777 [1] ELBOW-FLARED  
9. 132-1151 [1] TUBE AS  
10. 1B-9575 [5] BOLT (5/16-18X1.56-IN)  
11. 9M-1974 [5] WASHER-HARD (8.8X16X2-MM THK)  
12. 5S-0003 [5] NUT (5/16-18-THD)  
13. 3D-2189 [1] FITTING  
14. 3B-6499 [1] ELBOW  
15. 7C-9738 [1] ADAPTER  
16. 6L-2849 [1] JOINT AS-TUBE  
  9X-7521 [2] SEAL  
17. 3P-1823 [1] ADAPTER-PIPE  
18. 3N-3177 [1] JOINT AS-TUBE  
  9X-7529 [2] SEAL  
19. 132-1149 [1] TUBE AS  
20. 8T-6765 [1] PLUG-PIPE (1/4-18-THD)  
21. 9Y-9797 [1] ADAPTER  
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement
1981/04/22
Explanation Of Differences In Timing Advance Information
1981/08/26
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator
1982/08/25
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier
1982/11/10
New Governor Drive Gears And Weight Assemblies
1983/09/14
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint
1983/11/30
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage
1984/06/20
New Governor Drive Group Has Longer Service Life
1985/05/01
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control
1986/04/01
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers
1986/06/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas
1986/10/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
New Sleeve-Type Bearings Give Better Carburetor And Governor Control
1991/02/01
New Governor Control Assembly Helps Prevent Overspeed On Startup{1264}
1995/11/20
Governor Spring Guide Press Depth {1287,1284}
1996/01/17
Woodward Control Assemblies Have Changed Part Numbers To Provide The CE Marking For Electromagnetic Compatibility (EMC) Directives{1264}
1996/05/09
Error In The Testing And Adjusting Manuals For Fuel System Adjustment Timing Pin {1272}
1996/09/23
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time
1978/07/05
Operation and Maintenance Manual
Actuator Control Linkage - Lubricate
G3300 Engines
Governors and Actuators
G3300 Engines
Governor - Inspect
G3300 Engines
Special Instruction
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Use Of 6V4095 Or 6V4096 Pump And Governor Tool Groups{650, 1250}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Installation Of 8N628 Service Replacement Bearing For Rear Of Injection Pump Camshaft In Sleeve Metering Fuel Injection Pump Housing{1253}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Use Of 6V22 Tool Group For Replacement Of Governor Spring Guide{620, 624, 1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Using the 6V7870 Fixture Group and 6V7872 Pliers{1250, 1251}
Technical Information Bulletin
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
3300 Engine Timing Measurement For Reduced Emissions And Improved Engine Performance/Life
Specifications
Governor
G3304 and G3306 Engines
Governor Control
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Turbocharged Engines
G3304 and G3306 Engines
Governor Linkage
G3304 and G3306 Engines
Governor Linkage - Woodward PSG Governor For Naturally Aspirated Engine
G3304 and G3306 Engines
Testing and Adjusting
Governor - Adjust
G3304 and G3306 Engines
Disassembly and Assembly
Governor And Governor Drive
3306 NATURAL GAS ENGINE
Governor
3306 NATURAL GAS ENGINE
Governor Drive
3306 NATURAL GAS ENGINE
Governor And Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor
3304 & 3306 NATURAL GAS ENGINES
Governor Drive
3304 & 3306 NATURAL GAS ENGINES
Governor and Governor Drive - Remove
G3304 and G3306 Engines
Governor and Governor Drive - Install
G3304 and G3306 Engines
Governor and Governor Drive - Separate
G3304 and G3306 Engines
Governor and Governor Drive - Connect
G3304 and G3306 Engines
Governor - Disassemble
G3304 and G3306 Engines
Governor - Assemble
G3304 and G3306 Engines
Governor Drive - Disassemble
G3304 and G3306 Engines
Governor Drive - Assemble
G3304 and G3306 Engines
Service Magazine
New Fuel Injection Nozzle Assembly Used{1254}
1980/01/21
6V2029 Fixture Group Available For Adjustment Of Air/Fuel Ratio Control {0626,1278,0652}
1981/03/23
FT1585 Plate Can Be Fabricated For Governor Spring Guide Replacement{0626}
1981/04/13
New Torque Specification For Bushing{0374,1253,1251}
1982/01/18
Make Set Point Measurements Easier With The 6V4060 Engine Set Point Indicator{0651}
1982/08/16
6V6175 And 6V6176 Torque Adapters Make Installation Of Fuel Pump Drive Gear Easier{1206,1272,0614}
1982/11/08
New Governor Drive Gears And Weight Assemblies{1264}
1983/08/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
New Speed Setting Motor Assembly On Woodward PSG Governor Has More Resistance To Moisture And Vibration Damage{1264}
1984/05/14
New Governor Drive Group Has Longer Service Life{1289,1264}
1985/05/06
Check Fuel Injection Nozzles In Overheated Engines{1254}
1985/09/02
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Anti-Seize Compound And/Or Grease Not To Be Used On Fuel Pump Bonnet Retaining Bushings{1251}
1985/11/11
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Incorrect Connection Of Battery Charger Can Open Circuit Breaker And Damage Woodward 2301 Governor Control{1400,1401,4450}
1986/03/24
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
Use Correct Contact Point With Dial Indicator To Be Sure Of The Accuracy Of The Measurements Of Fuel Setting And Fuel Ratio Control Setting On Sleeve Metering Fuel Systems{0653,1250}
1977/09/26
Improved High Idle Display Of The 6V3100 And 8T5300/8T5301 Engine Timing Indicator Groups{0781}
1987/03/16
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
Use The Drive Sleeve On The Fuel Injection Pump Camshaft Only One Time{1286,1256,1251}
1978/07/03
Improved Guide Pin For Fuel Injection Pump Lifters{1251}
1978/08/21
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Modification To Rack Adjusting Tool Needed For Higher Rack Settings{0654,1257}
1978/10/16
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
Tee Handle Hexagonal Wrench In Rack Adjusting Tool Is Now Available For Parts Replacement
1979/09/10
Improvements Made To Fuel Injection Pump And Governor Group{1253,1281}
1979/12/10
New Sleeve-Type Bearings Give Better Carburetor And Governor Control{1265,1266}
1991/02/11
New Gaskets Help Prevent Leaks From Fuel System Governors{1264}
1991/12/02
New Fuel Pump Drive Idler Gear Assembly And Shaft Used In Front Timing Gear Groups {1206}
1993/06/14

Caterpillar Parts SIS Catalog G3306 :

GOVERNOR GP
7N-2375 GOVERNOR GP
GOVERNOR GP
4W-6815 GOVERNOR GP
GOVERNOR GP
1W-1634 GOVERNOR GP
GOVERNOR GP
1W-1634 GOVERNOR GP
GOVERNOR GP
1W-1633 GOVERNOR GP
GOVERNOR GP
1W-1633 GOVERNOR GP
131-1705 GOVERNOR GP
131-1703 GOVERNOR GP
GOVERNOR GP-ELECTRONIC
4W-8180 GOVERNOR GP-ELECTRONIC
GOVERNOR GP-ELECTRONIC
4W-8185 GOVERNOR GP-ELECTRONIC
MOUNTING GP-GOVERNOR CONTROL
170-1812 MOUNTING GP-GOVERNOR CONTROL
234-4356 MOUNTING GP-GOVERNOR CONTROL
234-4357 MOUNTING GP-GOVERNOR CONTROL
REGULATOR AS-GAS PRESSURE
154-9638 REGULATOR AS-GAS PRESSURE
REGULATOR AS-GAS PRESSURE
525-8844 REGULATOR AS-GAS PRESSURE
REGULATOR GP-GAS PRESSURE
110-4913 REGULATOR GP-GAS PRESSURE

Truck sale:

Caterpillar G3306, Construction
133,280 
Caterpillar G3306, Construction
- Stationary Generator Sets
HOLT CAT
Caterpillar G3306, Construction
90,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
WAGNER EQUIPMENT CO
Caterpillar G3306, Construction
22,500 
Caterpillar G3306, Construction
- Petroleum Engines
LOUISIANA CAT POWER SYSTEMS
Caterpillar G3306, Construction
55,000 
Caterpillar G3306, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
CATERPILLAR G3306 2014
 
CATERPILLAR G3306 2014
- STATIONARY - NATURAL GAS
WAGNER EQUIPMENT CO
United States
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.