AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

3E-3748 VALVE GP-SOLENOID S/N 1SX1600-99999 12 VOLT DC PART OF 8E-6401 VALVE GP-TRANSMISSION CONTROL 988F II


POWER TRAIN
VALVE GP-SOLENOID
CONTROL GP-TRANSMISSION HYD
AXLE GP
FRAME AND BODY
BUMPER GP

WHEEL LOADER 988F II WHEEL LOADER 2ZR
 988F Series II Wheel Loader 2ZR00001-UP (MACHINE) POWERED BY 3408E Engine SEBP2413 988F II 2ZR   (1995)

POWER TRAIN

VALVE GP-SOLENOID
VALVE GP-SOLENOID
3E-3748 VALVE GP-SOLENOID
 

#SEBP24130380
 

3E-3748: VALVE GP-SOLENOID

3E-3748 VALVE GP-SOLENOID
S/N 1SX1600-99999
12 VOLT DC
PART OF 8E-6401 VALVE GP-TRANSMISSION CONTROL
i00089656 SEBP2413
3E3748 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-3747 [1] COIL AS  
2. 1S-9593 [2] STRAP-CABLE  
3. 3E-3361 [1] PLUG AS-CONNECTOR (2-PIN)  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  3E-3362 [1] WEDGE-PLUG LOCK (2-PIN)  
4. 104-5970 [1] LOCKNUT (1/4-20-THD)  
5. 4B-4276 [1] WASHER (7X16X1.6-MM THK)  
6. 7X-1121 [1] CARTRIDGE AS  
   
    AVAILABLE REPAIR KIT(S):
  100-4083 [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES O-RING SEALS & BACKUP RING)
 

#SEBP24130381
 

8E-6401: VALVE GP-TRANSMISSION CONTROL

8E-6401 VALVE GP-TRANSMISSION CONTROL
S/N 1SX1600-99999
PART OF 8E-6400 CONTROL GP-TRANSMISSION HYD
i00169310 SEBP2413
8E6401 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8E-6398 Y [1] VALVE GP-SELECTOR (TRANSMISSION)  
2. 8E-4320 [1] PLATE  
3. 106-0551 YC [1] VALVE GP-SELECTOR & PRESS CONT  
4. 106-0553 C [1] MANIFOLD-TOP  
5. 8E-4387 [1] MANIFOLD  
6. 8E-7841 [1] CLIP AS-CONNECTING  
7. 2B-2695 [3] BOLT (5/16-18X0.875-IN)  
8. 9M-1974 [34] WASHER-HARD (8.8X16X2-MM THK)  
9. 1D-4540 [10] BOLT (5/16-18X2.75-IN)  
10. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
11. 9S-8007 [12] PLUG  
12. 7J-0204 [13] SEAL-O-RING  
13. 3E-3748 Y [6] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
14. 104-6727 C [1] HARNESS AS-TRANSMISSION (SHIFT SOLENOIDS)  
  6J-2419 [1] SEAL-O-RING  
15. 8E-7842 [1] CLIP AS-CONNECTING  
16. 6V-3965 [3] FITTING (QUICK DISCONNECT)  
17. 3J-1907 [3] SEAL-O-RING  
19. 1L-5081 [4] SPACER (0.41X0.75X0.56-IN THK)  
20. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
21. 1P-7404 [1] EYEBOLT (5/16-18X1.15-IN)  
22. 8M-2772 [4] CLIP (LOOP)  
23. 5S-0003 [1] NUT (5/16-18-THD)  
24. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
25. 1N-5999 [1] PLUG-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24130382
 

115-9753: WHEEL & FINAL DRIVE GP

115-9753 WHEEL & FINAL DRIVE GP
S/N 2ZR1-1469
PART OF 115-9758 AXLE AR-FIXED, 115-9749 AXLE AR-OSCILLATING
FIELD REPLACEMENT ORDER @@@@@115-9767@@@@@
i00166801 SEBP2413
1159753 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6999 [1] COVER  
2. 6V-8675 M [6] BOLT (M12X1.75X35-MM)  
3. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 7S-8561 [1] SEAL-O-RING  
5. 5P-4484 [1] PLUG-MAGNETIC  
6. 7M-8485 [1] SEAL-O-RING  
7. 5K-7696 [1] PLUG  
8. 3J-1907 [1] SEAL-O-RING  
9. 6V-3532 M [34] BOLT (M20X2.5X60-MM)  
10. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 118-9402 [1] CARRIER-PLANETARY  
12. 8S-6251 [1] SEAL-O-RING  
13. 2G-4553 [1] PLATE  
14. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
15. 2V-4148 [3] SHAFT-PLANETARY  
16. 7H-0308 [3] RING-RETAINING  
17. 4E-3638 [3] GEAR-PLANETARY (28-TEETH)  
18. 5D-3632 [6] BEARING AS-ROLLER  
19. 8K-0067 [3] SPACER (0.875-IN THK)  
20. 8X-4552 [6] WASHER (78X127X5-MM THK)  
21. 110-7748 M [40] STUD  
22. 141-7519 [1] CUP-BEARING  
23. 141-7518 [1] CONE-BEARING  
24. 115-9755 [1] WHEEL  
25. 1P-9594 [1] CUP-BEARING (TAPERED ROLLER)  
26. 116-2024 [1] CONE-BEARING  
27. 142-7562 [1] SPINDLE  
28. 8T-0666 M [20] BOLT (M24X3X90-MM)  
29. 5P-6604 [24] WASHER-HARD (25.4X40X5-MM THK)  
30. 3K-0360 [1] SEAL-O-RING  
31. 9W-6688 [1] SEAL GP-DUO-CONE  
32. 118-9399 [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
33. 4E-3639 [1] GEAR-RING (77-TEETH)  
34. 5T-7676 [4] RETAINER  
35. 8C-8992 M [8] BOLT-LOCKING (M12X1.75X30-MM)  
36. 108-0059 [1] PLATE-RETAINER  
37. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
38. 8K-0066 B [1] SHIM (0.112-IN THK)  
39. 4E-3637 [1] GEAR-SUN (19-TEETH)  
40. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
41. 6V-8132 M [4] BOLT (M24X3X120-MM)  
42. 9S-8005 [1] PLUG (3/4-16-THD)  
43. 1U-8846 B SEALANT-GASKET (5ML)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP24130383
 

115-9753: WHEEL & FINAL DRIVE GP

115-9753 WHEEL & FINAL DRIVE GP
S/N 2ZR1470-99999
PART OF 115-9758 AXLE AR-FIXED, 115-9749 AXLE AR-OSCILLATING
Type 1
FIELD REPLACEMENT ORDER @@@@@115-9767@@@@@
i00967931 SEBP2413
1159753 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6999 [1] COVER  
2. 6V-8675 M [6] BOLT (M12X1.75X35-MM)  
3. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 7S-8561 [1] SEAL-O-RING  
5. 5P-4484 [1] PLUG-MAGNETIC  
6. 7M-8485 [1] SEAL-O-RING  
7. 5K-7696 [1] PLUG  
8. 3J-1907 [1] SEAL-O-RING  
9. 6V-3532 M [34] BOLT (M20X2.5X60-MM)  
10. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 162-0195 [1] CARRIER-PLANETARY  
12. 8S-6251 [1] SEAL-O-RING  
13. 2G-4553 [1] PLATE  
14. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
15. 2V-4148 [3] SHAFT-PLANETARY  
16. 7H-0308 [3] RING-RETAINING  
17. 162-0191 C [3] GEAR-PLANETARY (28-TEETH)(28 TEETH)  
18. 5D-3632 [6] BEARING AS-ROLLER  
19. 8K-0067 [3] SPACER (0.875-IN THK)  
20. 8X-4552 [6] WASHER (78X127X5-MM THK)  
21. 110-7748 M [40] STUD  
22. 141-7519 [1] CUP-BEARING  
23. 141-7518 [1] CONE-BEARING  
24. 115-9755 [1] WHEEL  
25. 1P-9594 [1] CUP-BEARING (TAPERED ROLLER)  
26. 116-2024 [1] CONE-BEARING  
27. 197-8287 [1] SPINDLE  
28. 8T-0666 M [20] BOLT (M24X3X90-MM)  
29. 5P-6604 [24] WASHER-HARD (25.4X40X5-MM THK)  
30. 3K-0360 [1] SEAL-O-RING  
31. 9W-6688 [1] SEAL GP-DUO-CONE  
32. 162-0193 C [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
33. 162-0192 C [1] GEAR-RING (77 TEETH)  
34. 5T-7676 [4] RETAINER  
35. 8C-8992 M [8] BOLT-LOCKING (M12X1.75X30-MM)  
36. 163-4527 [1] PLATE-BEARING  
37. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
38. 8K-0066 B [1] SHIM (0.112-IN THK)  
39. 4E-3637 [1] GEAR-SUN (19-TEETH)  
40. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
41. 6V-8132 M [4] BOLT (M24X3X120-MM)  
42. 9S-8005 [1] PLUG (3/4-16-THD)  
43. 1U-8846 B SEALANT-GASKET  
44. 185-3653 [1] WASHER-THRUST  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24130384
 

115-9753: WHEEL & FINAL DRIVE GP

115-9753 WHEEL & FINAL DRIVE GP
S/N 2ZR1470-99999
PART OF 115-9758 AXLE AR-FIXED, 115-9749 AXLE AR-OSCILLATING
Type 2
FIELD REPLACEMENT ORDER @@@@@115-9767@@@@@
i02186276 SEBP2413
1159753 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6999 [1] COVER  
2. 6V-8675 M [6] BOLT (M12X1.75X35-MM)  
3. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 7S-8561 [1] SEAL-O-RING  
5. 5P-4484 [1] PLUG-MAGNETIC  
6. 7M-8485 [1] SEAL-O-RING  
7. 5K-7696 [1] PLUG  
8. 3J-1907 [1] SEAL-O-RING  
9. 6V-3532 M [34] BOLT (M20X2.5X60-MM)  
10. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 162-0195 [1] CARRIER-PLANETARY  
12. 8S-6251 [1] SEAL-O-RING  
13. 2G-4553 [1] PLATE  
14. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
15. 2V-4148 [3] SHAFT-PLANETARY  
16. 7H-0308 [3] RING-RETAINING  
17. 162-0191 [3] GEAR-PLANETARY (28-TEETH)(28 TEETH)  
18. 254-1125 C [3] BUSHING  
19. 239-4259 C [6] WASHER-THRUST  
21. 110-7748 M [40] STUD  
22. 141-7519 [1] CUP-BEARING  
23. 141-7518 [1] CONE-BEARING  
24. 115-9755 [1] WHEEL  
25. 1P-9594 [1] CUP-BEARING (TAPERED ROLLER)  
26. 116-2024 [1] CONE-BEARING  
27. 197-8287 [1] SPINDLE  
28. 8T-0666 M [20] BOLT (M24X3X90-MM)  
29. 5P-6604 [24] WASHER-HARD (25.4X40X5-MM THK)  
30. 3K-0360 [1] SEAL-O-RING  
31. 9W-6688 [1] SEAL GP-DUO-CONE  
32. 162-0193 [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
33. 162-0192 [1] GEAR-RING (77 TEETH)  
34. 5T-7676 [4] RETAINER  
35. 8C-8992 M [8] BOLT-LOCKING (M12X1.75X30-MM)  
36. 163-4527 [1] PLATE-BEARING  
37. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
38. 8K-0066 B [1] SHIM (0.112-IN THK)  
39. 4E-3637 [1] GEAR-SUN (19-TEETH)  
40. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
41. 6V-8132 M [4] BOLT (M24X3X120-MM)  
42. 9S-8005 [1] PLUG (3/4-16-THD)  
43. 1U-8846 B SEALANT-GASKET  
44. 185-3653 [1] WASHER-THRUST  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24130385
 

115-9767: WHEEL & FINAL DRIVE GP

115-9767 WHEEL & FINAL DRIVE GP
S/N 2ZR1-UP
FIELD REPLACEMENT FOR @@@@@115-9753@@@@@
i00967930 SEBP2413
1159767 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6999 [1] COVER  
2. 6V-8675 M [6] BOLT (M12X1.75X35-MM)  
3. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 7S-8561 [1] SEAL-O-RING  
5. 5P-4484 [1] PLUG-MAGNETIC  
6. 7M-8485 [1] SEAL-O-RING  
7. 5K-7696 [1] PLUG  
8. 3J-1907 [1] SEAL-O-RING  
9. 6V-3532 M [34] BOLT (M20X2.5X60-MM)  
10. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 162-0195 [1] CARRIER-PLANETARY  
12. 8S-6251 [1] SEAL-O-RING  
13. 2G-4553 [1] PLATE  
14. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
15. 2V-4148 [3] SHAFT-PLANETARY  
16. 7H-0308 [3] RING-RETAINING  
17. 162-0191 C [3] GEAR-PLANETARY (28-TEETH)(23 TEETH)  
18. 6Y-9885 [6] BEARING AS-ROLLER  
19. 8K-0067 [3] SPACER (0.875-IN THK)  
20. 8X-4552 [6] WASHER (78X127X5-MM THK)  
21. 110-7748 M [40] STUD  
22. 141-7519 [1] CUP-BEARING  
23. 141-7518 [1] CONE-BEARING  
24. 115-9755 [1] WHEEL  
25. 1P-9594 [1] CUP-BEARING (TAPERED ROLLER)  
26. 116-2024 [1] CONE-BEARING  
27. 8K-0066 B [1] SHIM (0.112-IN THK)  
28. 4E-3637 [1] GEAR-SUN (19-TEETH)  
29. 162-0193 C [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
30. 1U-8846 B SEALANT-GASKET  
31. 9W-6688 [1] SEAL GP-DUO-CONE  
32. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
33. 162-0192 C [1] GEAR-RING (77 TEETH)  
34. 5T-7676 [4] RETAINER  
35. 8C-8992 M [8] BOLT-LOCKING (M12X1.75X30-MM)  
36. 163-4527 [1] PLATE-BEARING  
37. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
38. 197-8287 [1] SPINDLE  
39. 185-3653 [1] WASHER-THRUST  
40. 9S-8005 [1] PLUG (3/4-16-THD)  
41. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24130386
 

115-9767: WHEEL & FINAL DRIVE GP

115-9767 WHEEL & FINAL DRIVE GP
S/N 2ZR1-UP
FIELD REPLACEMENT FOR @@@@@115-9753@@@@@
i02186229 SEBP2413
1159767 WHEEL & FINAL DRIVE GP Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 154-6999 [1] COVER  
2. 6V-8675 M [6] BOLT (M12X1.75X35-MM)  
3. 5P-8245 [6] WASHER-HARD (13.5X25.5X3-MM THK)  
4. 7S-8561 [1] SEAL-O-RING  
5. 5P-4484 [1] PLUG-MAGNETIC  
6. 7M-8485 [1] SEAL-O-RING  
7. 5K-7696 [1] PLUG  
8. 3J-1907 [1] SEAL-O-RING  
9. 6V-3532 M [34] BOLT (M20X2.5X60-MM)  
10. 5P-8248 [34] WASHER-HARD (20X36.5X3.5-MM THK)  
11. 162-0195 [1] CARRIER-PLANETARY  
12. 8S-6251 [1] SEAL-O-RING  
13. 2G-4553 [1] PLATE  
14. 9X-2125 M [4] BOLT-LOCKING (M10X1.5X25-MM)  
15. 2V-4148 [3] SHAFT-PLANETARY  
16. 7H-0308 [3] RING-RETAINING  
17. 162-0191 [3] GEAR-PLANETARY (28-TEETH)(23 TEETH)  
18. 254-1125 C [3] BUSHING  
19. 239-4259 C [6] WASHER-THRUST  
21. 110-7748 M [40] STUD  
22. 141-7519 [1] CUP-BEARING  
23. 141-7518 [1] CONE-BEARING  
24. 115-9755 [1] WHEEL  
25. 1P-9594 [1] CUP-BEARING (TAPERED ROLLER)  
26. 116-2024 [1] CONE-BEARING  
27. 8K-0066 B [1] SHIM (0.112-IN THK)  
28. 4E-3637 [1] GEAR-SUN (19-TEETH)  
29. 162-0193 [1] HUB AS  
  8K-0079 [1] BUSHING-TERMINAL  
30. 1U-8846 B SEALANT-GASKET  
31. 9W-6688 [1] SEAL GP-DUO-CONE  
32. 2S-0736 [10] WASHER-HARD (17X27X3.5-MM THK)  
33. 162-0192 [1] GEAR-RING (77 TEETH)  
34. 5T-7676 [4] RETAINER  
35. 8C-8992 M [8] BOLT-LOCKING (M12X1.75X30-MM)  
36. 163-4527 [1] PLATE-BEARING  
37. 8T-2393 M [10] BOLT-SOCKET HEAD (M16X2X60-MM)  
38. 197-8287 [1] SPINDLE  
39. 185-3653 [1] WASHER-THRUST  
40. 9S-8005 [1] PLUG (3/4-16-THD)  
41. 3K-0360 [1] SEAL-O-RING  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP24130387
 

132-8582: BUMPER GP-REAR

132-8582 BUMPER GP-REAR
S/N 2ZR1-699
PART OF 122-9527 CHASSIS AR
i00172141 SEBP2413
1328582 BUMPER GP-REAR Parts scheme 1328582 BUMPER GP-REAR Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-3885 [1] PLATE AS  
2. 4E-6587 [1] PLATE AS  
3. 4E-6588 [1] PLATE AS  
4. 4E-8852 [1] HANDLE (LH)  
5. 4E-8892 [1] HANDLE (RH)  
6. 9U-3954 [1] PIN AS-DRAWBAR  
  2K-8726 [2] PIN-SPRING  
7. 5M-3062 [41] BOLT (3/8-16X0.75-IN)  
8. 5P-1075 [42] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 101-3623 [2] HANDRAIL  
10. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 9C-4197 [1] LATCH  
13. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
14. 6V-8801 [7] NUT (3/8-16-THD)  
15. 5P-8502 B [2] PADLOCK GP  
    (EACH INCLUDES)
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
16. 5G-2514 [1] TUBE  
17. 4E-6582 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
18. 9U-2336 [1] PLATE AS (RH)  
19. 9U-2337 [1] PLATE AS (LH)  
20. 4E-6583 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
21. 7X-0772 [10] WASHER-HARD (10.2X25.5X2.5-MM THK)  
22. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8E-6463 [1] TREAD  
24. 4E-6585 [1] TREAD  
25. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
26. 132-8583 [1] BUMPER AS  
  5V-7107 [2] DOWEL  
  4S-1722 [2] BOSS  
  3L-5549 [2] STUD-WELD (3/8-16X0.625-IN)  
27. 4E-8851 [4] SUPPORT-STEP (RUBBER)  
28. 7X-0772 [2] WASHER-HARD (10.2X25.5X2.5-MM THK)  
29. 9U-4788 [2] STEP AS  
30. 106-6432 [2] STEP AS  
31. 8T-8919 [8] BOLT (1/2-13X1.75-IN)  
32. 4V-9803 [8] PLATE  
33. 1K-6872 [24] LOCKNUT (1/2-13-THD)  
34. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
35. 5P-1076 [22] WASHER-HARD (13.5X30X4-MM THK)  
36. 9U-3910 [1] LATCH AS (LH)  
  4H-8380 [1] PIN-SPRING  
37. 8T-8917 [22] BOLT (1/2-13X1.25-IN)  
38. 9U-3911 [1] LATCH AS  
  4H-8380 [1] PIN-SPRING  
39. 7X-0400 [2] BOLT (1-8X1.5-IN)  
40. 7X-0404 [12] BOLT (1-8X2.5-IN)  
41. 8T-5361 [12] WASHER-HARD (28X49X5-MM THK)  
42. 8T-4835 [8] BOLT (1/2-13X2-IN)  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
 

#SEBP24130388
 

132-8582: BUMPER GP-REAR

132-8582 BUMPER GP-REAR
S/N 2ZR700-817; 2ZR819-881
PART OF 122-9527 CHASSIS AR
i00565858 SEBP2413
1328582 BUMPER GP-REAR Parts scheme 1328582 BUMPER GP-REAR Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9U-3885 [1] PLATE AS  
2. 4E-6587 [1] PLATE AS  
3. 4E-6588 [1] PLATE AS  
4. 4E-8852 [1] HANDLE (LH)  
5. 4E-8892 [1] HANDLE (RH)  
6. 9U-3954 [1] PIN AS-DRAWBAR  
  2K-8726 [2] PIN-SPRING  
7. 5M-3062 [41] BOLT (3/8-16X0.75-IN)  
8. 5P-1075 [42] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 101-3623 [2] HANDRAIL  
10. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 9C-4197 [1] LATCH  
13. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
14. 6V-8801 [7] NUT (3/8-16-THD)  
15. 5P-8502 B [2] PADLOCK GP  
    (EACH INCLUDES)
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
16. 5G-2514 [1] TUBE  
17. 4E-6582 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
18. 9U-2336 [1] PLATE AS (RH)  
19. 9U-2337 [1] PLATE AS (LH)  
20. 4E-6583 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
21. 7X-0772 [10] WASHER-HARD (10.2X25.5X2.5-MM THK)  
22. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8E-6463 [1] TREAD  
24. 4E-6585 [1] TREAD  
25. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
26. 132-8583 [1] BUMPER AS  
  5V-7107 [2] DOWEL  
  4S-1722 [2] BOSS  
  3L-5549 [2] STUD-WELD (3/8-16X0.625-IN)  
  1F-0748 C [22] NUT-WELD (1/2-13-THD)  
27. 8T-5361 [12] WASHER-HARD (28X49X5-MM THK)  
28. 7X-0772 [2] WASHER-HARD (10.2X25.5X2.5-MM THK)  
29. 7X-0404 [12] BOLT (1-8X2.5-IN)  
30. 7X-0400 [2] BOLT (1-8X1.5-IN)  
31. 8T-8919 C [22] BOLT (1/2-13X1.75-IN)  
32. 9U-3911 [1] LATCH AS  
  4H-8380 [1] PIN-SPRING  
33. 9U-3910 [1] LATCH AS (LH)  
  4H-8380 [1] PIN-SPRING  
34. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
35. 5P-1076 [22] WASHER-HARD (13.5X30X4-MM THK)  
36. 144-2641 CY [2] STEP GP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24130389
 

132-8582: BUMPER GP-REAR

132-8582 BUMPER GP-REAR
S/N 2ZR882-882
PART OF 122-9527 CHASSIS AR
i01150371 SEBP2413
1328582 BUMPER GP-REAR Parts scheme 1328582 BUMPER GP-REAR Parts scheme
  For full view, you need register

Parts for your 988F II WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 4E-6587 [1] PLATE AS  
3. 4E-6588 [1] PLATE AS  
4. 4E-8852 [1] HANDLE (LH)  
5. 4E-8892 [1] HANDLE (RH)  
6. 136-5049 CY [1] DRAWBAR GP  
7. 5M-3062 C [24] BOLT (3/8-16X0.75-IN)  
8. 5P-1075 C [24] WASHER-HARD (10.2X22.5X3-MM THK)  
9. 101-3623 [2] HANDRAIL  
10. 5S-7379 [4] BOLT (3/8-16X0.875-IN)  
11. 8T-4223 [2] WASHER-HARD (13.5X25.5X3-MM THK)  
14. 6V-8801 C [6] NUT (3/8-16-THD)  
15. 5P-8502 B [2] PADLOCK GP  
    (EACH INCLUDES)
  5P-8500 A [1] KEY  
  8Y-6364 A [1] SLEEVE  
17. 4E-6582 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
18. 9U-2336 [1] PLATE AS (RH)  
19. 9U-2337 [1] PLATE AS (LH)  
20. 4E-6583 [1] DOOR AS  
  8E-6460 [1] TREAD  
  9V-1777 [1] CABLE  
  6V-2370 [5] RIVET-POP  
  6V-4604 [1] RIVET-POP  
  9V-1820 [1] SPACER  
21. 7X-0772 [10] WASHER-HARD (10.2X25.5X2.5-MM THK)  
22. 8T-4896 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
23. 8E-6463 [1] TREAD  
24. 4E-6585 [1] TREAD  
25. 3K-6060 [2] LOCKNUT (3/8-16-THD)  
26. 151-4592 C [1] BUMPER AS  
  1F-0750 [8] NUT-WELD (3/8-16-THD)  
  6V-1635 [18] RIVET-POP  
  1F-0748 [22] NUT-WELD (1/2-13-THD)  
  3L-5549 [2] STUD-WELD (3/8-16X0.625-IN)  
  4S-1722 [2] BOSS  
  5V-7107 [2] DOWEL  
27. 8T-5361 [12] WASHER-HARD (28X49X5-MM THK)  
28. 7X-0772 [2] WASHER-HARD (10.2X25.5X2.5-MM THK)  
29. 7X-0404 [12] BOLT (1-8X2.5-IN)  
30. 7X-0400 [2] BOLT (1-8X1.5-IN)  
31. 8T-8919 [22] BOLT (1/2-13X1.75-IN)  
32. 9U-3911 [1] LATCH AS  
  4H-8380 [1] PIN-SPRING  
33. 9U-3910 [1] LATCH AS (LH)  
  4H-8380 [1] PIN-SPRING  
34. 5M-3062 [2] BOLT (3/8-16X0.75-IN)  
35. 5P-1076 [22] WASHER-HARD (13.5X30X4-MM THK)  
36. 144-2641 Y [2] STEP GP  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 988F II :

VALVE GP-SEQUENCE & PRESS CONT
104-9290 VALVE GP-SEQUENCE & PRESS CONT
VALVE GP-SELECTOR & PRESS CONT
106-0551 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR
8E-6398 VALVE GP-SELECTOR
VALVE GP-RELIEF
8E-9728 VALVE GP-RELIEF
VALVE GP-RELIEF
147-4467 VALVE GP-RELIEF
VALVE GP-CENTRIFUGAL
9U-9377 VALVE GP-CENTRIFUGAL
VALVE GP-CENTRIFUGAL
135-4903 VALVE GP-CENTRIFUGAL
VALVE GP-CENTRIFUGAL
133-3241 VALVE GP-CENTRIFUGAL
VALVE GP-TRANSMISSION CONTROL
8E-6401 VALVE GP-TRANSMISSION CONTROL
WHEEL & FINAL DRIVE GP
115-9753 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
115-9753 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
115-9753 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
115-9767 WHEEL & FINAL DRIVE GP
WHEEL & FINAL DRIVE GP
115-9767 WHEEL & FINAL DRIVE GP
BUMPER GP-REAR
132-8582 BUMPER GP-REAR
BUMPER GP-REAR
132-8582 BUMPER GP-REAR

Truck sale:

 
 
CATERPILLAR 988F II 2000
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
QUINN COMPANY
California United States
1999 CAT 988F II
USD $65,000 
1999 CAT 988F II

Mideast Equipment Supply
South Windsor, Connecticut
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
2000 CAT 988F II
Call 
2000 CAT 988F II

GESTRUCK, S.L.
CAT 988F II
 
CAT 988F II

MIDWEST INDUSTRIAL SALES INC
Gardner, Illinois
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.