AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

162-1523 CYLINDER GP-LIFT -LH S/N 7HR232-99999 279.4-MM (11-IN) BORE X 1173-MM (46.18-IN) STROKE PART OF 109-6870 LINES GP-LIFT CYLINDER 992G


HYDRAULIC SYSTEM
CYLINDER GP
FILTER GP
HYDRAULIC GP
KICKOUT & POSITIONER GP

WHEEL LOADER 992G WHEEL LOADER 7HR
 992G Wheel Loader 7HR00001-UP (MACHINE) POWERED BY 3508B Engine SEBP2415 992G 7HR   (1997)

HYDRAULIC SYSTEM

CYLINDER GP
CYLINDER GP-LIFT
112-8209 CYLINDER GP-LIFT
CYLINDER GP-LIFT
112-8209 CYLINDER GP-LIFT
CYLINDER GP-LIFT
136-7880 CYLINDER GP-LIFT
CYLINDER GP-LIFT
136-7880 CYLINDER GP-LIFT
CYLINDER GP-LIFT
162-1522 CYLINDER GP-LIFT
CYLINDER GP-LIFT
162-1523 CYLINDER GP-LIFT
CYLINDER GP-TILT
394-9988 CYLINDER GP-TILT
 

#SEBP24150730
 

162-1523: CYLINDER GP-LIFT

162-1523 CYLINDER GP-LIFT -LH
S/N 7HR232-99999
279.4-MM (11-IN) BORE X 1173-MM (46.18-IN) STROKE
PART OF 109-6870 LINES GP-LIFT CYLINDER
i00900032 SEBP2415
1621523 CYLINDER GP-LIFT Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 162-1525 [1] CYLINDER AS-LIFT (LH)  
  146-1616 [1] BEARING  
2. 108-0124 J [1] RING  
3. 174-0344 J [1] SEAL AS  
4. 108-0129 J [1] RING-BACKUP  
5. 109-5702 J [1] SEAL-O-RING  
6. 109-5717 J [1] SEAL-HEAD  
7. 112-9827 [1] ROD AS  
  146-1616 [1] BEARING  
8. 167-2233 [1] SEAL AS  
9. 146-2616 [1] PISTON  
10. 225-3296 [1] SEAL-WIPER  
11. 155-8162 [1] HEAD  
12. 167-2352 J [1] SEAL-U-CUP  
13. 6V-8237 [11] WASHER (26X44X4-MM THK)  
14. 8T-0668 M [11] BOLT (M24X3X110-MM)  
15. 8T-6749 J [1] RING-WEAR  
16. 9X-6018 [1] LOCKNUT (4-12-THD)  
17. 157-6961 J [2] RING-BACKUP  
   
    AVAILABLE REPAIR KIT(S):
  229-7189 J [1] KIT-SEAL  
    (INCLUDES PARTS MARKED J, SEAL AS-BUFFER & SEAL WIPER)
  J   KIT MARKED J INCLUDES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24150731
 

394-9988: CYLINDER GP-TILT

394-9988 CYLINDER GP-TILT
S/N 7HR1-99999
279.4-MM BORE X 1816-MM STROKE
PART OF 109-6871 LINES GP-TILT CYLINDER
i05124756 SEBP2415
3949988 CYLINDER GP-TILT Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 112-4283 [1] CYLINDER AS  
1A. 125-2563 [2] BEARING  
  125-2586 [1] SPACER (174.6X187.3X74-MM THK)  
2. 9X-6018 [1] LOCKNUT (4-12-THD)  
3. 108-0124 J [1] RING  
4. 174-0344 J [1] SEAL AS  
5. 394-9989 [1] PISTON  
6. 109-5702 J [1] SEAL-O-RING  
7. 108-0129 J [1] RING-BACKUP  
8. 109-5717 J [1] SEAL-HEAD  
9. 155-8161 [1] HEAD  
10. 167-7997 [1] ROD AS  
10A. 161-5811 [1] BEARING  
11. 225-3291 J [1] SEAL-WIPER  
12. 167-2344 J [1] SEAL-U-CUP  
13. 167-2225 J [1] SEAL AS-BUFFER  
14. 8J-9917 J [1] RING-WEAR  
15. 7X-2583 M [10] BOLT (M30X3.5X120-MM)  
16. 9X-8399 [10] WASHER (33X56X6-MM THK)  
   
    AVAILABLE REPAIR KIT(S):
  523-9489 J [1] KIT-HYD CYLINDER SEAL  
  J   KIT MARKED J SERVICES PART(S) MARKED J
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24150732
 

115-2129: FILTER GP-OIL

115-2129 FILTER GP-OIL -STEERING, IMPLEMENT, PILOT
S/N 7HR1-99999
PART OF 109-6867 LINES GP-HYDRAULIC, 109-6873 LINES GP-STEERING OIL COOLER
i00490541 SEBP2415
1152129 FILTER GP-OIL Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 465-6505 [1] FILTER-OIL (ULTRA HIGH EFFICIENCY)  
2. 376-7257 Y [1] SWITCH GP-PRESSURE (OIL FILTER BYPASS)  
3. 3J-1907 [1] SEAL-O-RING  
4. 5F-9144 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150733
 

109-6820: HYDRAULIC AR

109-6820 HYDRAULIC AR
S/N 7HR1-99999
PART OF 109-6815 COMMON AR
i01138579 SEBP2415
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  109-6875 Y [1] CONTROL GP-SERVICE BRAKE  
  112-4206 Y [1] COOLER GP-AXLE OIL  
  109-6882 Y [1] CYLINDER & MTG GP-STEERING  
  109-6867 Y [1] LINES GP-HYDRAULIC  
  109-6872 Y [1] LINES GP-HYDRAULIC FAN  
  109-6873 Y [1] LINES GP-STEERING OIL COOLER  
  109-6870 Y [1] LINES GP-LIFT CYLINDER  
  132-2131 Y [1] LINES GP-SERVICE BRAKE  
  109-6868 Y [1] LINES GP-STEERING  
    S/N 7HR1-331
  163-6504 Y [1] LINES GP-STEERING  
    S/N 7HR332-99999
  163-6562 Y [1] LINES GP-STEERING  
    S/N 7HR332-99999
  109-6884 Y [1] LINES GP-STEERING NEUTRALIZER  
  109-6871 Y [1] LINES GP-TILT CYLINDER  
  109-6887 Y [1] TANK & MTG GP-HYDRAULIC (STEERING, BRAKE)  
  109-6888 Y [1] TANK & MTG GP-HYDRAULIC (IMPLEMENT, HYDRAULIC FAN)  
  109-6858 Y [1] VALVE & MTG GP-MAIN CONTROL  
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150734
 

109-6907: KICKOUT & POSITIONER GP

109-6907 KICKOUT & POSITIONER GP -LIFT
S/N 7HR1-UP
PART OF 109-6821 ELECTRICAL AR
i00492478 SEBP2415
1096907 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-9875 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [2] HOUSING  
6. 4E-2453 [2] SHAFT  
7. 4N-9467 [1] BEARING  
8. 6D-3025 [3] BALL BEARING  
9. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
10. 8C-5607 [6] MOUNT-ISOLATION  
11. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
12. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
13. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
14. 121-0284 Y [1] SENSOR GP-POSITION (LIFT)  
15. 126-8456 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
  097-6341 [2] BLOCK  
16. 145-8863 [1] PLATE  
17. 160-1825 [1] PLATE  
18. 160-8254 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
19. 126-8463 [2] LEVER  
20. 146-3770 [1] GUARD  
21. 146-3769 [1] GUARD AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
22. 5C-2890 M [4] NUT (M6X1-THD)  
23. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
25. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
26. 8T-4138 M [2] BOLT (M6X1X20-MM)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
29. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
30. 9X-2480 M [3] BOLT (M6X1X45-MM)  
31. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
32. 160-3866 [1] ROLLER-CAM  
33. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
34. 8C-8451 M [1] BOLT (M6X1X40-MM)  
35. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
36. 161-7056 [1] SPACER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150735
 

109-6907: KICKOUT & POSITIONER GP

109-6907 KICKOUT & POSITIONER GP -LIFT
S/N 7HR1-99999
PART OF 109-6821 ELECTRICAL AR
i01026750 SEBP2415
1096907 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-9875 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [4] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [2] HOUSING  
6. 4E-2453 [2] SHAFT  
7. 4N-9467 [1] BEARING  
8. 6D-3025 [3] BALL BEARING  
9. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
10. 8C-5607 [6] MOUNT-ISOLATION  
11. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
12. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
13. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
14. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(LIFT)  
15. 126-8456 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [3] NUT-WELD (M10X1.5-THD)  
  097-6341 [2] BLOCK  
16. 145-8863 [1] PLATE  
17. 160-1825 [1] PLATE  
18. 160-8254 [1] BRACKET AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
19. 126-8463 [2] LEVER  
20. 146-3770 [1] GUARD  
21. 146-3769 [1] GUARD AS  
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
22. 5C-2890 M [4] NUT (M6X1-THD)  
23. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
25. 8T-4137 M [8] BOLT (M10X1.5X20-MM)  
26. 8T-4138 M [2] BOLT (M6X1X20-MM)  
27. 8T-4224 [1] WASHER-HARD (8.8X16X2-MM THK)  
28. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
29. 9B-7237 [1] BOLT (3/8-16X1.25-IN)  
30. 9X-2480 M [3] BOLT (M6X1X45-MM)  
31. 9X-8256 [5] WASHER (6.6X12X2-MM THK)  
32. 160-3866 [1] ROLLER-CAM  
33. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
34. 8C-8451 M [1] BOLT (M6X1X40-MM)  
35. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
36. 161-7056 [1] SPACER  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150736
 

130-7382: KICKOUT & POSITIONER GP

130-7382 KICKOUT & POSITIONER GP -TILT
S/N 7HR1-123; 7HR125-217; 7HR219-231; 7HR233-233; 7HR235-237
HIGH LIFT
PART OF 112-4201, 148-7910 LIFT AR
i00503729 SEBP2415
1307382 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-9875 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [1] HOUSING  
6. 4E-2453 [1] SHAFT  
7. 106-4158 [1] SPACER (9.74X12.7X12.7-MM THK)  
8. 4V-1939 [14] CLAMP  
9. 5V-6439 [7] PLATE  
10. 6D-3025 [3] BALL BEARING  
11. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
12. 7G-7053 [1] GROMMET  
13. 7K-1181 [1] STRAP-CABLE  
14. 8C-5607 [6] MOUNT-ISOLATION  
15. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
16. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
17. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
18. 101-9759 [3] SPACER (9X20X39.2-MM THK)  
19. 115-5601 [1] HARNESS AS-SENSOR (KICKOUT, POSITIONER)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
20. 118-2865 [1] BRACKET  
21. 121-0284 Y [1] SENSOR GP-POSITION (TILT)  
22. 126-8457 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
23. 160-1825 [1] PLATE  
24. 160-1829 [1] PLATE AS  
25. 126-8463 [1] LEVER  
26. 160-5842 [1] GUARD  
27. 161-7397 [1] PLATE  
28. 159-3549 [1] GUARD AS  
29. 4S-5719 [3] SPACER (10.31X25X12.7-MM THK)  
30. 5C-2890 M [4] NUT (M6X1-THD)  
31. 5P-9085 [6] CLIP (LOOP)  
32. 7X-7729 [2] WASHER (11X25X3-MM THK)  
33. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
35. 8T-4138 M [2] BOLT (M6X1X20-MM)  
36. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
37. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
38. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
39. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
40. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
41. 9X-2480 M [17] BOLT (M6X1X45-MM)  
42. 9X-8256 [19] WASHER (6.6X12X2-MM THK)  
43. 155-0048 [1] GUARD AS  
44. 3E-9411 [3] WASHER-HARD (17.5X38X6-MM THK)  
45. 8T-7338 M [3] BOLT (M16X2X45-MM)  
46. 8T-4182 M [3] BOLT (M10X1.5X45-MM)  
47. 8C-8451 M [1] BOLT (M6X1X40-MM)  
48. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
49. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
50. 160-3866 [1] ROLLER-CAM  
51. 161-7056 [1] SPACER  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150737
 

130-7382: KICKOUT & POSITIONER GP

130-7382 KICKOUT & POSITIONER GP -TILT
S/N 7HR1-UP
HIGH LIFT
PART OF 112-4201, 148-7910, 170-8463, 170-8544 LIFT AR
i00988676 SEBP2415
1307382 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-2447 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [1] HOUSING  
6. 4E-2453 [1] SHAFT  
7. 106-4158 [1] SPACER (9.74X12.7X12.7-MM THK)  
8. 4V-1939 [14] CLAMP  
9. 5V-6439 [7] PLATE  
10. 6D-3025 [3] BALL BEARING  
11. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
12. 7G-7053 [1] GROMMET  
13. 7K-1181 [1] STRAP-CABLE  
14. 8C-5607 [6] MOUNT-ISOLATION  
15. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
16. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
17. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
18. 101-9759 [3] SPACER (9X20X39.2-MM THK)  
19. 115-5601 [1] HARNESS AS-SENSOR (KICKOUT, POSITIONER)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
20. 118-2865 [1] BRACKET  
21. 161-8904 Y [1] SENSOR GP-POSITION (ROTARY)(TILT)  
22. 176-4162 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9R-1733 M [1] BOSS (M10X1.5X66.5-MM)  
23. 160-1825 [1] PLATE  
25. 126-8463 [1] LEVER  
26. 160-5842 [1] GUARD  
27. 161-7397 [1] PLATE  
28. 159-3549 [1] GUARD AS  
29. 4S-5719 [3] SPACER (10.31X25X12.7-MM THK)  
30. 5C-2890 M [4] NUT (M6X1-THD)  
31. 5P-9085 [6] CLIP (LOOP)  
32. 7X-7729 [2] WASHER (11X25X3-MM THK)  
33. 8T-4121 [13] WASHER-HARD (11X21X2.5-MM THK)  
34. 8T-4137 M [10] BOLT (M10X1.5X20-MM)  
36. 8T-4186 M [2] BOLT (M10X1.5X40-MM)  
37. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
38. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
39. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
40. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
41. 9X-2480 M [18] BOLT (M6X1X45-MM)  
42. 9X-8256 [17] WASHER (6.6X12X2-MM THK)  
43. 155-0048 [1] GUARD AS  
44. 3E-9411 [3] WASHER-HARD (17.5X38X6-MM THK)  
45. 8T-7338 M [3] BOLT (M16X2X45-MM)  
46. 8T-4182 M [3] BOLT (M10X1.5X45-MM)  
48. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
49. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
50. 160-3866 [1] ROLLER-CAM  
51. 176-2446 [1] SPACER (9.93X12.7X32-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150738
 

131-1276: KICKOUT & POSITIONER GP

131-1276 KICKOUT & POSITIONER GP -TILT
S/N 7HR1-224; 7HR226-229; 7HR231-232; 7HR234-234; 7HR238-238
STANDARD LIFT
PART OF 131-1255, 148-7909 LIFT AR
i00506852 SEBP2415
1311276 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 159-9875 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [1] HOUSING  
6. 4E-2453 [1] SHAFT  
7. 106-4158 [1] SPACER (9.74X12.7X12.7-MM THK)  
8. 4V-1939 [14] CLAMP  
9. 5V-6439 [7] PLATE  
10. 6D-3025 [3] BALL BEARING  
11. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
12. 7G-7053 [1] GROMMET  
13. 7K-1181 [1] STRAP-CABLE  
14. 8C-5607 [6] MOUNT-ISOLATION  
15. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
16. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
17. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
18. 115-5601 [1] HARNESS AS-SENSOR (KICKOUT, POSITIONER)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
19. 118-2865 [1] BRACKET  
20. 121-0284 Y [1] SENSOR GP-POSITION (TILT)  
21. 126-8457 [1] PLATE AS  
  6V-9632 M [2] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
22. 161-7396 [1] PLATE AS  
23. 160-1825 [1] PLATE  
24. 160-1828 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
25. 126-8463 [1] LEVER  
26. 160-5842 [1] GUARD  
27. 161-7398 [1] GUARD AS  
28. 129-4162 [3] SPACER (9.5X25X42.5-MM THK)  
29. 5C-2890 M [4] NUT (M6X1-THD)  
30. 5P-9085 [5] CLIP (LOOP)(7.94MM ID)  
31. 7X-7729 [2] WASHER (11X25X3-MM THK)  
32. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
35. 8T-4138 M [2] BOLT (M6X1X20-MM)  
36. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
38. 8T-7547 M [1] BOLT (M8X1.25X30-MM)  
39. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
40. 9X-2480 M [17] BOLT (M6X1X45-MM)  
41. 9X-8256 [19] WASHER (6.6X12X2-MM THK)  
42. 160-7583 [1] GUARD AS  
43. 8T-7338 M [3] BOLT (M16X2X45-MM)  
44. 3E-9411 [3] WASHER-HARD (17.5X38X6-MM THK)  
45. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
46. 161-7056 [1] SPACER  
47. 160-3866 [1] ROLLER-CAM  
48. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
49. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
50. 8C-8451 M [1] BOLT (M6X1X40-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP24150739
 

131-1276: KICKOUT & POSITIONER GP

131-1276 KICKOUT & POSITIONER GP -TILT
S/N 7HR1-UP
STANDARD LIFT
PART OF 131-1255, 148-7909, 170-2472, 170-8022 LIFT AR
i01026222 SEBP2415
1311276 KICKOUT & POSITIONER GP Parts scheme
  For full view, you need register

Parts for your 992G WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 176-2447 [1] SPRING  
2. 2H-3429 [1] RING-RETAINING  
3. 2L-6726 [2] RING-RETAINING  
4. 4B-4274 [2] WASHER (5.5X13X1.2-MM THK)  
5. 4E-2250 [1] HOUSING  
6. 4E-2453 [1] SHAFT  
7. 106-4158 [1] SPACER (9.74X12.7X12.7-MM THK)  
8. 4V-1939 [14] CLAMP  
9. 5V-6439 [7] PLATE  
10. 6D-3025 [3] BALL BEARING  
11. 6V-2313 M [2] BOLT (M5X0.8X30-MM)  
12. 7G-7053 [1] GROMMET  
13. 7K-1181 [1] STRAP-CABLE  
14. 8C-5607 [6] MOUNT-ISOLATION  
15. 8C-5608 [3] SPACER (6.5X9.5X25.4-MM THK)  
16. 8T-0288 M [2] BOLT (M5X0.8X12-MM)  
17. 9X-6165 [3] WASHER (6.5X22X2.5-MM THK)  
18. 115-5601 [1] HARNESS AS-SENSOR (KICKOUT, POSITIONER)  
  155-2260 [2] KIT-CONNECTING PLUG (3-PIN)  
    (EACH KIT-CONNECTING PLUG INCLUDES PLUG AS & WEDGE)
19. 118-2865 [1] BRACKET  
20. 161-8904 CY [1] SENSOR GP-POSITION (ROTARY)(TILT)  
21. 176-4162 [1] PLATE AS  
  6V-9632 M [1] NUT-WELD (M6X1-THD)  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
  9R-1733 M [1] BOSS (M10X1.5X66.5-MM)  
22. 161-7396 [1] PLATE AS  
23. 160-1825 [1] PLATE  
25. 126-8463 [1] LEVER  
26. 160-5842 [1] GUARD  
27. 161-7398 [1] GUARD AS  
28. 129-4162 [3] SPACER (9.5X25X42.5-MM THK)  
29. 5C-2890 M [4] NUT (M6X1-THD)  
30. 5P-9085 [5] CLIP (LOOP)  
31. 7X-7729 [2] WASHER (11X25X3-MM THK)  
32. 8T-4121 [12] WASHER-HARD (11X21X2.5-MM THK)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4137 M [9] BOLT (M10X1.5X20-MM)  
36. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
37. 8T-6869 M [3] BOLT (M8X1.25X60-MM)  
38. 8T-4908 M [1] BOLT (M8X1.25X25-MM)  
39. 5S-7382 [1] BOLT (3/8-16X1.375-IN)  
40. 9X-2480 M [18] BOLT (M6X1X45-MM)  
41. 9X-8256 [17] WASHER (6.6X12X2-MM THK)  
42. 160-7583 [1] GUARD AS  
43. 8T-7338 M [3] BOLT (M16X2X45-MM)  
44. 3E-9411 [3] WASHER-HARD (17.5X38X6-MM THK)  
45. 8T-4195 M [3] BOLT (M10X1.5X30-MM)  
46. 176-2446 [1] SPACER (9.93X12.7X32-MM THK)  
47. 160-3866 [1] ROLLER-CAM  
48. 105-1766 [1] SPACER (6.6X11X6-MM THK)  
49. 9X-2026 [1] WASHER (6.5X17X1-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Special Instruction
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Technical Information Bulletin
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Reuse And Salvage Guidelines
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
2009/01/05
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30

Caterpillar Parts SIS Catalog 992G :

CYLINDER GP-LIFT
162-1522 CYLINDER GP-LIFT
CYLINDER GP-LIFT
136-7880 CYLINDER GP-LIFT
CYLINDER GP-LIFT
136-7880 CYLINDER GP-LIFT
CYLINDER GP-LIFT
112-8209 CYLINDER GP-LIFT
CYLINDER GP-LIFT
112-8209 CYLINDER GP-LIFT
COOLER GP-HYD & STEERING OIL
110-8686 COOLER GP-HYD & STEERING OIL
132-3301 CONTROL AR-RIDE
CONTROL & LINES GP-RIDE
112-4812 CONTROL & LINES GP-RIDE
CYLINDER GP-TILT
394-9988 CYLINDER GP-TILT
FILTER GP-OIL
115-2129 FILTER GP-OIL
109-6820 HYDRAULIC AR
KICKOUT & POSITIONER GP
109-6907 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
109-6907 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
130-7382 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
130-7382 KICKOUT & POSITIONER GP
KICKOUT & POSITIONER GP
131-1276 KICKOUT & POSITIONER GP

Truck sale:

Caterpillar 992G
 
Caterpillar 992G
- Wheel loaders
J.A. DELMAS S.A.S.
 
 
Caterpillar 992G, Radlader, Bau-Und Bergbauausrüstung


 
 
Caterpillar 992G, Radlader, Bau-Und Bergbauausrüstung


 
 
Caterpillar 992G, Radlader, Bau-Und Bergbauausrüstung


 
 
Caterpillar 992G, Radlader, Bau-Und Bergbauausrüstung


Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.