101-0830 CYLINDER HEAD GP S/N 7RN641-768 3516B GEN SET ENGINE

BASIC ENGINE

CYLINDER HEAD GP

0. 101-0830 CYLINDER H
1. 101-0830 CYLINDER H
2. 101-0830 CYLINDER H
3. 101-0830 CYLINDER H
4. 101-1174 CYLINDER H
5. 145-3216 CYLINDER H
6. 155-5273 CYLINDER H
7. 201-4257 CYLINDER H
8. 317-2440 CYLINDER H
9. 335-6220 CYLINDER H
0. INFORMATION

GEN SET ENGINE 3516B GEN SET ENGINE 7RN
3516B Generator Set Engine 7RN00001-UP SEBP2416 3516B 7RN (1994)

BASIC ENGINE

CYLINDER HEAD GP

290-1351 CYLINDER HEAD AS

101-0830 CYLINDER HEAD GP

#SEBP24160050

101-0830: CYLINDER HEAD GP

CYLINDER HEAD GP

101-0830 CYLINDER HEAD GP
S/N 7RN641-768

i00094517 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5B-7890	[1]	PLUG-PIPE
2.	155-5273 CY	[1]	CYLINDER HEAD GP
3.	7N-1961	[6]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	5P-8248	[6]	WASHER-HARD (20X36.5X3.5-MM THK)
4.	7N-1961	[2]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	5P-8248	[2]	WASHER-HARD (20X36.5X3.5-MM THK)
	9Y-0635	[2]	SPACER (19.35X30.18X45-MM THK)
6.	5B-0213	[2]	BOLT (3/8-16X2.375-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	110-6991	[1]	GASKET-CYLINDER HEAD
9.	126-1113	[4]	SEAL
10.	126-1112	[4]	SEAL
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160051

101-0830: CYLINDER HEAD GP

CYLINDER HEAD GP

101-0830 CYLINDER HEAD GP
S/N 7RN1-1948

i01124949 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5B-7890 B	[1]	PLUG-PIPE
2.	145-3216 CY	[1]	CYLINDER HEAD GP
3.	131-0420	[6]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
4.	131-0421	[2]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	9Y-0635	[1]	SPACER (19.35X30.18X45-MM THK)
5.	204-5427	[4]	SEAL (WATER)
6.	5B-0213	[2]	BOLT (3/8-16X2.375-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	110-6991	[1]	GASKET-CYLINDER HEAD
9.	204-5426	[4]	SEAL (WATER)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160052

101-0830: CYLINDER HEAD GP

CYLINDER HEAD GP

101-0830 CYLINDER HEAD GP
S/N 7RN1949-2058

i01958937 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5B-7890 B	[1]	PLUG-PIPE
2.	201-4257 CY	[1]	CYLINDER HEAD GP
3.	131-0420	[6]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
4.	131-0421	[2]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	9Y-0635	[1]	SPACER (19.35X30.18X45-MM THK)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
5.	204-5426	[4]	SEAL (WATER)
6.	5B-0213	[2]	BOLT (3/8-16X2.375-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	204-5427	[4]	SEAL (WATER)
9.	110-6991	[1]	GASKET-CYLINDER HEAD
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160053

101-0830: CYLINDER HEAD GP

CYLINDER HEAD GP

101-0830 CYLINDER HEAD GP
S/N 7RN2059-UP

i03431829 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5B-7890 B	[1]	PLUG-PIPE
2.	317-2440 CY	[1]	CYLINDER HEAD GP
3.	131-0420	[6]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
4.	131-0421	[2]	FASTENER GP-CYLINDER HEAD
			(EACH INCLUDES)
	7N-1961	[1]	BOLT-12 POINT HEAD (3/4-16X8.5-IN)
	9Y-0635	[1]	SPACER (19.35X30.18X45-MM THK)
	187-7738	[1]	WASHER-HARD (21X36.5X3.5-MM THK)
5.	420-0652	[4]	SEAL AS-WATER
6.	5B-0213	[2]	BOLT (3/8-16X2.375-IN)
7.	5M-2894	[2]	WASHER-HARD (10.2X18.5X2.5-MM THK)
8.	420-0653	[4]	SEAL AS-WATER
9.	110-6991	[1]	GASKET-CYLINDER HEAD
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160054

101-1174: CYLINDER HEAD GP

CYLINDER HEAD GP

101-1174 CYLINDER HEAD GP
S/N 7RN1-640
PART OF 101-0830 CYLINDER HEAD GP

i00462621 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	101-1177	[4]	SPRING-VALVE
2.	2W-2662	[4]	SEAT-SPRING
3.	101-1180	[4]	SPRING-VALVE
4.	133-3814	[4]	ROTOCOIL AS
5.	2A-4429	[8]	LOCK-RETAINER
6.	7E-4609	[2]	VALVE-INLET
7.	7N-1902	[2]	DOWEL
8.	130-2613	[4]	GUIDE-VALVE
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)
	166-5944 AB		GUIDE-VALVE (0.127-MM OS)
9.	101-1175 Y	[1]	CYLINDER HEAD AS
10.	121-9839	[2]	VALVE-EXHAUST
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160055

145-3216: CYLINDER HEAD GP

CYLINDER HEAD GP

145-3216 CYLINDER HEAD GP
S/N 7RN769-1948
PART OF 101-0830 CYLINDER HEAD GP

i00768420 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[8]	LOCK-RETAINER
2.	137-6856	[2]	SEAL (VALVE STEM)
3.	197-6999	[4]	ROTOCOIL AS
4.	7N-1902	[2]	DOWEL
5.	101-1180	[4]	SPRING-VALVE (OUTER)
6.	101-1177	[4]	SPRING-VALVE (INNER)
7.	8T-6759	[1]	PLUG-PIPE
8.	210-2542	[2]	VALVE-INLET
9.	210-2529 C	[2]	VALVE-EXHAUST
10.	154-1612 CY	[1]	CYLINDER HEAD AS
11.	133-9306	[2]	GUIDE-VALVE (STANDARD)(INLET)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(INLET)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(INLET)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(INLET)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(INLET)
11A.	133-9306	[2]	GUIDE-VALVE (STANDARD)(EXHAUST)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(EXHAUST)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(EXHAUST)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(EXHAUST)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(EXHAUST)
12.	2W-2662	[2]	SEAT-SPRING (EXHAUST)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160056

155-5273: CYLINDER HEAD GP

CYLINDER HEAD GP

155-5273 CYLINDER HEAD GP
S/N 7RN641-768
PART OF 101-0830 CYLINDER HEAD GP

i00905020 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[8]	LOCK-RETAINER
2.	137-6856	[4]	SEAL (VALVE STEM)
3.	133-3814	[4]	ROTOCOIL AS
4.	7N-1902	[2]	DOWEL
5.	101-1177	[4]	SPRING-VALVE (INNER)
6.	101-1180	[4]	SPRING-VALVE (OUTER)
7.	121-9839	[2]	VALVE-EXHAUST
8.	7E-4609	[2]	VALVE-INLET
9.	131-0423 Y	[1]	CYLINDER HEAD AS
10.	133-9306	[2]	GUIDE-VALVE (STANDARD)(INLET)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(INLET)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(INLET)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(INLET)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(INLET)
10A.	133-9306	[2]	GUIDE-VALVE (STANDARD)(EXHAUST)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(EXHAUST)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(EXHAUST)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(EXHAUST)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(EXHAUST)
11.	8T-6759	[1]	PLUG-PIPE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160057

201-4257: CYLINDER HEAD GP

CYLINDER HEAD GP

201-4257 CYLINDER HEAD GP
S/N 7RN1949-2058
PART OF 101-0830 CYLINDER HEAD GP

i01946433 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[4]	LOCK-RETAINER (INLET)
2.	133-9306	[2]	GUIDE-VALVE (STANDARD)(INLET)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(INLET)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(INLET)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(INLET)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(INLET)
3.	154-1612 Y	[1]	CYLINDER HEAD AS
4.	194-4897	[2]	VALVE-EXHAUST
5.	281-6157	[4]	SPRING (OUTER)
6.	194-4902	[4]	SPRING-VALVE (INNER)
7.	197-6995	[2]	GUIDE-VALVE (STANDARD)(EXHAUST)
	276-3875 AB		GUIDE-VALVE (0.127-MM OS)(EXHAUST)
	276-3876 AB		GUIDE-VALVE (0.25-MM OS)(EXHAUST)
	320-7710 AB		GUIDE-VALVE (0.381-MM OS, EXHAUST)
	320-7711 AB		GUIDE-VALVE (0.508-MM OS, EXHAUST)
8.	197-7006	[2]	SEAL-VALVE STEM (INLET)
9.	197-7055	[4]	LOCK-RETAINER (EXHAUST)
10.	197-7062	[2]	ROTOCOIL AS (INLET)
11.	197-7063	[2]	ROTOCOIL AS (EXHAUST)
12.	209-0962	[2]	WASHER (17.8X45X7.29-MM THK)
13.	210-2542	[2]	VALVE-INLET
14.	8T-6759	[1]	PLUG-PIPE
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160058

317-2440: CYLINDER HEAD GP

CYLINDER HEAD GP

317-2440 CYLINDER HEAD GP
S/N 7RN2059-UP
PART OF 101-0830 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@335-6220@@@@@

i02906084 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[4]	LOCK-RETAINER
2.	133-9306	[2]	GUIDE-VALVE (STANDARD)(INLET)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(INLET)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(INLET)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(INLET)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(INLET)
3.	154-1612 Y	[1]	CYLINDER HEAD AS
4.	468-8825	[2]	VALVE-EXHAUST
5.	197-6995	[2]	GUIDE-VALVE (STANDARD)(EXHAUST)
	276-3875 AB		GUIDE-VALVE (0.127-MM OS)(EXHAUST)
	276-3876 AB		GUIDE-VALVE (0.25-MM OS)(EXHAUST)
	320-7710 AB		GUIDE-VALVE (0.381-MM OS, EXHAUST)
	320-7711 AB		GUIDE-VALVE (0.508-MM OS, EXHAUST)
6.	197-7055	[4]	LOCK-RETAINER
7.	468-8824	[2]	VALVE-INLET
8.	316-5976	[4]	SPRING (OUTER)
9.	316-5977	[4]	SPRING (INNER)
10.	316-5978	[2]	ROTOCOIL AS (INLET)
11.	316-5979	[2]	ROTOCOIL AS (EXHAUST)
12.	316-5980	[2]	SEAL-VALVE STEM
13.	316-5981	[2]	WASHER (17.8X44.5X3-MM THK)
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24160059

335-6220: CYLINDER HEAD GP

CYLINDER HEAD GP

335-6220 CYLINDER HEAD GP
S/N 7RN2059-UP
FIELD REPLACEMENT FOR @@@@@317-2440@@@@@

i03432503 SEBP2416

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	2A-4429	[4]	LOCK-RETAINER
2.	133-9306	[2]	GUIDE-VALVE (STANDARD)(INLET)
	149-1982 AB		GUIDE-VALVE (0.508-MM OS)(INLET)
	273-3553 AB		GUIDE-VALVE (0.127-MM OS)(INLET)
	273-3554 AB		GUIDE-VALVE (0.25-MM OS)(INLET)
	301-9248 AB		GUIDE-VALVE (0.38-MM THK)(INLET)
3.	468-8825	[2]	VALVE-EXHAUST
4.	197-6995	[2]	GUIDE-VALVE (STANDARD)(EXHAUST)
	276-3875 AB		GUIDE-VALVE (0.127-MM OS)(EXHAUST)
	276-3876 AB		GUIDE-VALVE (0.25-MM OS)(EXHAUST)
	320-7710 AB		GUIDE-VALVE (0.381-MM OS, EXHAUST)
	320-7711 AB		GUIDE-VALVE (0.508-MM OS, EXHAUST)
5.	197-7055	[4]	LOCK-RETAINER
6.	468-8824	[2]	VALVE-INLET
7.	290-1351 Y	[1]	CYLINDER HEAD AS
8.	316-5976	[4]	SPRING (OUTER)
9.	316-5977	[4]	SPRING (INNER)
10.	316-5978	[2]	ROTOCOIL AS (INLET)
11.	316-5979	[2]	ROTOCOIL AS (EXHAUST)
12.	316-5980	[2]	SEAL-VALVE STEM
13.	316-5981	[2]	WASHER (17.8X44.5X3-MM THK)

	449-7113 BF	[2]	ROTOCOIL AS
	449-7116 BF	[2]	SEAL-VALVE STEM
	A		NOT PART OF THIS GROUP
	B		USE AS REQUIRED
	F		NOT SHOWN
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

Information:

BASIC ENGINE

CYLINDER HEAD GP

Engine News

Improved Water Seal Reduces The Possibility Of Cylinder Head Joint Water Leaks {1100}
1998/01/20

New Valve Lash Adjusting Tool Group Released For All 3500 Engines{0600,1105,1121}
1998/05/01

New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01

Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01

Bolts, Washers, And Spacers Grouped Into Fastener Groups In Engine Cylinder Head Groups{1100}
1999/02/01

New Basic Cylinder Head Group Used In 3500B High Speed Commercial Engines{1100,1103,1105}
1999/05/01

Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01

The Oil Seals Have Been Removed From The Exhaust Valves {1100}
2000/12/01

New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2002/12/01

New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01

New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/10/01

Procedure for Cylinder Head Bolt Tightening {1100}
2003/12/01

Oversized Valve Guides are Available {1104}
2005/01/31

Correction to Specifications "Cylinder Head Valves" {1108}
2005/03/21

Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18

An Improved Outer Valve Spring is Used {1100, 1108}
2006/01/02

A New Cylinder Head Gasket is Used {1124}
2006/07/24

Use the Correct Parts in the Valve Train {1100}
2007/01/22

Improved Valve Components Are Used {1100, 1108}
2008/12/22

New O-Rings Are Used with the Plugs for the Fuel Passages in 3500 Engines {1100, 1101, 1252, 1254}
2010/09/14

New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2014/01/13

Cat<SUP>®</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
Cat^® Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}

A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}

Special Instruction

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}

New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}

Service Letter-NACD

PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512, AND 3516 PETROLEUM ENGINES

PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING THE CYLINDER HEAD LIFTING EYE BOLT HOLE ON VARIOUS 3508, 3512, AND 3516 ENGINES

PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES
PRODUCT SUPPORT PROGRAM FOR REPAIRING AN OUTER VALVE SPRING FAILURE ON VARIOUS 3508, 3512 AND 3516 PETROLEUM ENGINES

Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.

Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks

Product Support Program For Replacing The Outer Valve Springs On Certain 3508B, 3512B And 3516B Engines
Product Support Program For Replacing The Outer Valve Springs On Certain 3508B, 3512B And 3516B Engines

The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks
The Cylinder Heads Need To Be Inspected For Blockage In The Coolant Outlet On Certain 3508, 3508B, 3512, 3512B, 3516, 3516B, Engines; 777D And 793C Off Highway Trucks

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-Australia

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-CFEL

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-CSARL

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-Americas

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-Brazil

Technical Information Bulletin

Machining Premachined Valve Seat Inserts
Machining Premachined Valve Seat Inserts

Failure of Reused Rotocoils in 3500 Engines{1100}
Failure of Reused Rotocoils in 3500 Engines{1100}

Possible Coolant Leaks in Certain 3500 Cylinder Heads{1100, 1395}
Possible Coolant Leaks in Certain 3500 Cylinder Heads{1100, 1395}

Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}

Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}

Specifications

Cylinder Head
3500B Engines

Cylinder Head Valves
3500B Engines

Tool Operating Manual

421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}

{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}

M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}

Service Letter-China

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Service Letter-Asia

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Systems Operation

Cylinder Block, Liners and Heads
3500B Engines

Reuse And Salvage Guidelines

Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}

Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}

Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}

Information Release Memo

REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS
REMAN 3500 ENGINE CORE ACCEPTANCE CRITERIA REVISION AND OTHER RECENT PRODUCT IMPROVEMENTS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

Service Letter-APD

Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock
Product Improvement Program For Removing All 1944901 Valve Springs From Dealer Part Stock

Testing and Adjusting

Valve Lash and Valve Bridge Adjustment
3500B Engines

Cylinder Head
3500B Engines

Troubleshooting

Valve Rotocoil or Spring Lock Is Free
3500B Engines and 3500 Engines with EUI Option

Disassembly and Assembly

Rocker Shaft and Pushrod - Install
3500B Engines

Cylinder Head - Remove
3500B Engines

Cylinder Head - Disassemble
3500B Engines

Cylinder Head - Assemble
3500B Engines

Cylinder Head - Install
3500B Engines

Service Magazine

Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13

Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23

Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3516B :

101-0830 CYLINDER HEAD GP

290-1351 CYLINDER HEAD AS

242-5328 CYLINDER HEAD AS

161-2508 CYLINDER HEAD AS

155-5274 CYLINDER HEAD AS

154-1612 CYLINDER HEAD AS

131-4338 CYLINDER HEAD AS

131-0423 CYLINDER HEAD AS

101-0830 CYLINDER HEAD GP

101-1174 CYLINDER HEAD GP

145-3216 CYLINDER HEAD GP

155-5273 CYLINDER HEAD GP

201-4257 CYLINDER HEAD GP

317-2440 CYLINDER HEAD GP

Truck sale:

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.

500,000

Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.

350,000

Caterpillar 3516B, Stationary Generator Sets, Construction

Caterpillar 3516B
- Industrial engines
RING POWER CORP.

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.