AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-3813 SEAL GP-CRANKSHAFT 3516B GEN SET ENGINE


BASIC ENGINE
CRANKSHAFT GP
DRIVE GP-AUXILIARY
SHAFT GP-STUB
CYLINDER BLOCK GP
VALVE MECHANISM GP

GEN SET ENGINE 3516B GEN SET ENGINE 7RN
 3516B Generator Set Engine 7RN00001-UP SEBP2416 3516B 7RN   (1994)

BASIC ENGINE

CRANKSHAFT GP
CRANKSHAFT AS
448-8940 CRANKSHAFT AS
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
CRANKSHAFT GP
8N-0337 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
 

#SEBP24160180
 

7W-3813: SEAL GP-CRANKSHAFT

7W-3813 SEAL GP-CRANKSHAFT
i00090785 SEBP2416
7W3813 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8433 C [1] SEAL (COUNTERCLOCKWISE ROTATION)  
    (INSTALL IN FLYWHEEL HOUSING ON STANDARD ROTATION ENGINES & IN FRONT HOUSING ON REVERSE ROTATION ENGINES)
2. 113-8432 C [1] SEAL (CLOCKWISE ROTATION)  
    (INSTALL IN FRONT HOUSING ON STANDARD ROTATION ENGINES & IN FLYWHEEL HOUSING ON REVERSE ROTATION ENGINES)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24160181
 

209-3559: SHAFT GP-AUXILIARY DRIVE

209-3559 SHAFT GP-AUXILIARY DRIVE -UPPER FRONT, RH
AN ATTACHMENT
i01563677 SEBP2416
2093559 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1621 [4] BOLT (1/2-13X1-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
 

#SEBP24160182
 

209-3560: SHAFT GP-AUXILIARY DRIVE

209-3560 SHAFT GP-AUXILIARY DRIVE -UPPER REAR, LH
AN ATTACHMENT
i01563674 SEBP2416
2093560 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1590 [4] BOLT (3/8-16X2-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
7. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
 

#SEBP24160183
 

209-3561: SHAFT GP-AUXILIARY DRIVE

209-3561 SHAFT GP-AUXILIARY DRIVE -LOWER REAR, LH
AN ATTACHMENT
i01562997 SEBP2416
2093561 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1621 [4] BOLT (1/2-13X1-IN)  
5. 9X-7371 C [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP24160184
 

209-3562: SHAFT GP-AUXILIARY DRIVE

209-3562 SHAFT GP-AUXILIARY DRIVE -UPPER FRONT, LH
AN ATTACHMENT
i01563670 SEBP2416
2093562 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1621 [4] BOLT (1/2-13X1-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
 

#SEBP24160185
 

7N-8042: SHAFT GP-AUXILIARY DRIVE

7N-8042 SHAFT GP-AUXILIARY DRIVE -LOWER FRONT, LH
AN ATTACHMENT
i00410875 SEBP2416
7N8042 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1590 [4] BOLT (3/8-16X2-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
7. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
 

#SEBP24160186
 

7W-3629: SHAFT GP-STUB

7W-3629 SHAFT GP-STUB -FRONT
AN ATTACHMENT
i00432203 SEBP2416
7W3629 SHAFT GP-STUB Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-3579 [1] SHAFT-STUB  
2. 5N-2317 [12] BOLT-12 POINT HEAD (1-14X9.5-IN)  
 

#SEBP24160187
 

8N-8510: VALVE GP-EXPLOSION RELIEF

8N-8510 VALVE GP-EXPLOSION RELIEF -CRANKCASE
AN ATTACHMENT
i00415455 SEBP2416
8N8510 VALVE GP-EXPLOSION RELIEF Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8N-8509 J [2] VALVE GP-EXPLOSION RELIEF (CRANKCASE)  
2. 272-0759 [2] SEAL  
   
    AVAILABLE REPAIR KIT(S):
  2W-3584 J [1] KIT-REPAIR (EXPLOSION RELIEF)(CRANKCASE)  
    (INCLUDES VALVE PLATE & SPINDLE O-RINGS)
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP24160188
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN1-209
i00459936 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 7W-7235 [3] BUTTON  
3. 8L-2777 [3] SEAL-O-RING  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 C [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 C [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 100-3898 [1] ROCKER ARM AS  
  230-2620 [1] BUSHING  
  100-3900 [1] INSERT  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 129-4181 [2] BRIDGE AS  
16. 127-9870 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 C [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 123-4269 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  100-3900 [1] INSERT  
  230-2620 [1] BUSHING  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 7E-5342 [1] HARNESS AS-WIRING (VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
27. 100-3884 [1] BASE AS-ROCKER ARM  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 C [2] BOLT (3/8-16X2-IN)  
32. 100-3892 [1] LIFTER AS-UNIT INJECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP24160189
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN210-244
Type 1
i00094512 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 C [1] SEAL  
2. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
3. 121-5481 [2] LIFTER AS-VALVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 200-2003 [2] SCREW-ADJUSTMENT (1/2-20X2-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 2N-5842 [2] SCREW (3/8-24X1-IN)  
13. 9L-7712 [2] NUT (3/8-24-THD)  
14. 129-4181 [2] BRIDGE AS  
15. 230-2619 [1] SCREW-ADJUSTMENT (5/8-18X2.375-IN)  
16. 9F-7707 [3] RING-RETAINING  
17. 100-3877 [1] RETAINER-SPRING  
18. 5P-7530 [1] SEAL-O-RING  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 154-6388 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  230-2620 [1] BUSHING  
  8N-7197 [1] SOCKET-ARM  
21. 196-4791 [1] SHAFT AS  
22. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
23. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 6J-2245 [1] SEAL-O-RING  
25. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
26. 120-7413 CY [1] BASE GP-VALVE COVER  
27. 100-3878 [1] SPRING-INJECTOR  
28. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
29. 7E-6508 [1] CAP AS  
30. 0S-1590 [2] BOLT (3/8-16X2-IN)  
31. 154-6389 [3] BUTTON  
32. 196-4793 [1] ROCKER ARM AS  
  230-2620 [1] BUSHING  
  8N-7197 [1] SOCKET-ARM  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
New Counterweight Bolt Assembly Replaces Bolt And Washer {1231}
1998/07/01
Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01
Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
Be Sure To Use The Correct Procedure To Remove The Rear Crankshaft Seal And Wear Sleeve{1161}
1999/09/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2000/12/01
Recommended Procedure For Lubricating And Tightening The Bolts That Fasten The Counterweights To The Crankshaft {1231}
2001/03/01
Be Sure To Check The Counterweights On The Engine Crankshaft For Counterweight Sequence Numbers {1231}
2001/08/01
New Main Bearings Provide Improved Bearing Retention in the Cylinder Block {1203}
2001/09/01
Tightness of Bolted Joints with the Torque Turn Procedure {1101, 1202, 1203, 1218}
2005/04/18
Usability of Main Bearings and Camshaft Bearings {1202, 1203, 1218, 1219}
2008/11/24
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2013/08/21
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/02/20
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
3500 and 3500B Engines
Special Instruction
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Special Handling Information And Installation Instructions For Crankshaft Seal Groups That Have Hydrodynamic Grooves In The Sealing Lip{1160, 1161}
Service Letter-NACD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Failure of the Connecting Rod Bearings on 3500 and 3600 Engines Due to Delamination {1219, 1225}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
3500B Engines
Connecting Rod and Main Bearing Journals
3500B Engines
Crankshaft
3500B Engines
Service Letter-China
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Service Letter-Asia
Systems Operation
Crankshaft
3500B Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Product Support Program For Repairing Engines That Fail Due To Cracked Main Bearing Caps On Certain 3508, 3512 And 3516 Engines Used In Off-Highway Trucks, Track-Type Tractors, Hydraulic Excavators And Wheel Loaders Or Generator Set, Industrial, Marine, Locomotive, Marine, Auxiliary And Vehicular Applications
Testing and Adjusting
Excessive Bearing Wear - Inspect
3500B Engines
Main Bearings
3500B Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B Engines
Disassembly and Assembly
Bearing Clearance - Check
3500B Engines
Crankshaft Main Bearings - Remove
3500B Engines
Crankshaft Main Bearings - Install
3500B Engines
Crankshaft - Remove
3500B Engines
Crankshaft - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Remove
3500B Engines
Crankshaft Front Seal and Wear Sleeve - Install
3500B Engines
Crankshaft Rear Seal and Wear Sleeve - Install
3500B Engines
Service Magazine
125-0200 Camshaft Pilot To Remove And Install 106-4584 Camshaft {1202}
1997/01/27
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/07/23
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}

Caterpillar Parts SIS Catalog 3516B :

PULLEY GP-FAN DRIVE
7W-5253 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
7W-5252 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
7W-5225 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
7W-5224 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
7W-5223 PULLEY GP-FAN DRIVE
PULLEY GP-FAN DRIVE
562-4365 PULLEY GP-FAN DRIVE
PULLEY GP-AUXILIARY DRIVE
8N-8468 PULLEY GP-AUXILIARY DRIVE
PULLEY GP-AUXILIARY DRIVE
8N-8467 PULLEY GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3559 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3560 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3561 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3562 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
7N-8042 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-STUB
7W-3629 SHAFT GP-STUB
VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.