AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

100-3905 VALVE MECHANISM GP S/N 7RN210-244 Type 2 3516B GEN SET ENGINE


BASIC ENGINE
VALVE MECHANISM GP
LUBRICATION SYSTEM
BREATHER GP

GEN SET ENGINE 3516B GEN SET ENGINE 7RN
 3516B Generator Set Engine 7RN00001-UP SEBP2416 3516B 7RN   (1994)

BASIC ENGINE

VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
 

#SEBP24160190
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN210-244
Type 2
i01977642 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 7W-7235 [3] BUTTON  
3. 8L-2777 [3] SEAL-O-RING  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 100-3898 [1] ROCKER ARM AS  
  230-2620 [1] BUSHING  
  100-3900 [1] INSERT  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 100-4330 [2] BRIDGE AS  
16. 100-3874 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 100-3904 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  100-3900 [1] INSERT  
  230-2620 [1] BUSHING  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 7E-5342 [1] HARNESS AS-WIRING (VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
27. 120-7413 Y [1] BASE GP-VALVE COVER  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 [2] BOLT (3/8-16X2-IN)  
32. 100-3892 [1] LIFTER AS-UNIT INJECTOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160191
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN245-408
i01974453 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 7W-7235 [3] BUTTON  
3. 8L-2777 [3] SEAL-O-RING  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 100-3898 [1] ROCKER ARM AS  
  230-2620 [1] BUSHING  
  100-3900 [1] INSERT  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 129-4181 [2] BRIDGE AS  
16. 127-9870 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 100-3904 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  230-2620 [1] BUSHING  
  100-3900 [1] INSERT  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 7E-5342 [1] HARNESS AS-WIRING (VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
27. 120-7413 Y [1] BASE GP-VALVE COVER  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 [2] BOLT (3/8-16X2-IN)  
32. 100-3892 [1] LIFTER AS-UNIT INJECTOR  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160192
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN409-451
i01974862 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 7W-7235 [3] BUTTON  
3. 8L-2777 [3] SEAL-O-RING  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 100-3898 [1] ROCKER ARM AS  
  230-2620 [1] BUSHING  
  100-3900 [1] INSERT  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 129-4181 [2] BRIDGE AS  
16. 127-9870 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 123-4269 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  100-3900 [1] INSERT  
  230-2620 [1] BUSHING  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
27. 120-7413 Y [1] BASE GP-VALVE COVER  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 [2] BOLT (3/8-16X2-IN)  
32. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160193
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN452-807
Type 1
i01974949 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 143-8717 C [1] ROCKER ARM AS  
  7W-7235 [1] BUTTON  
  8L-2777 [1] SEAL-O-RING  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 129-4181 [2] BRIDGE AS  
16. 127-9870 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 143-8718 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  7W-7235 [1] BUTTON  
  8L-2777 [1] SEAL-O-RING  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS. & WEDGE)
27. 120-7413 Y [1] BASE GP-VALVE COVER  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 [2] BOLT (3/8-16X2-IN)  
32. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160194
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN452-807
Type 2
i01975025 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 7C-0204 [2] SCREW-ADJUSTMENT (1/2-20X2.73-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 154-6386 C [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
13. 2N-5842 [2] SCREW (3/8-24X1-IN)  
14. 9L-7712 [2] NUT (3/8-24-THD)  
15. 129-4181 [2] BRIDGE AS  
16. 127-9870 [1] SCREW-ADJUSTMENT  
17. 121-5481 [2] LIFTER AS-VALVE  
18. 100-3877 [1] RETAINER-SPRING  
19. 5P-7530 [1] SEAL-O-RING  
20. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 154-6388 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
22. 100-3887 [1] SHAFT AS-ROCKER ARM  
23. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
24. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
25. 6J-2245 [1] SEAL-O-RING  
26. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS. & WEDGE)
27. 120-7413 Y [1] BASE GP-VALVE COVER  
28. 100-3878 [1] SPRING-INJECTOR  
29. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
30. 7E-6508 [1] CAP AS  
31. 0S-1590 [2] BOLT (3/8-16X2-IN)  
32. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
33. 154-6389 C [3] BUTTON  
34. 9F-7707 C [3] RING-RETAINING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160195
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN808-1948
i01975049 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
3. 184-2449 [2] LIFTER AS-VALVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-1143 C [2] BOLT (3/8-16X2.5-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 200-2003 [2] SCREW-ADJUSTMENT (1/2-20X2-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 2N-5842 [2] SCREW (3/8-24X1-IN)  
13. 9L-7712 [2] NUT (3/8-24-THD)  
14. 129-4181 [2] BRIDGE AS  
15. 230-2619 [1] SCREW-ADJUSTMENT (5/8-18X2.375-IN)  
16. 9F-7707 [3] RING-RETAINING  
17. 100-3877 [1] RETAINER-SPRING  
18. 5P-7530 [1] SEAL-O-RING  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 154-6388 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
21. 196-4791 [1] SHAFT AS  
22. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
23. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 6J-2245 [1] SEAL-O-RING  
25. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS. & WEDGE)
26. 120-7413 Y [1] BASE GP-VALVE COVER  
27. 100-3878 [1] SPRING-INJECTOR  
28. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
29. 7E-6508 [1] CAP AS  
30. 0S-1590 [2] BOLT (3/8-16X2-IN)  
31. 154-6389 [3] BUTTON  
32. 196-4793 [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160196
 

100-3905: VALVE MECHANISM GP

100-3905 VALVE MECHANISM GP
S/N 7RN1949-1952
i02066638 SEBP2416
1003905 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 136-9640 [1] LIFTER AS-UNIT INJECTOR  
3. 184-2449 [2] LIFTER AS-VALVE  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-1143 [2] BOLT (3/8-16X2.5-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 200-2003 [2] SCREW-ADJUSTMENT (1/2-20X2-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
13. 230-3152 C [1] BRIDGE (EXHAUST)  
14. 230-3153 C [1] BRIDGE (INLET)  
15. 230-2619 [1] SCREW-ADJUSTMENT (5/8-18X2.375-IN)  
16. 9F-7707 [3] RING-RETAINING  
17. 100-3877 [1] RETAINER-SPRING  
18. 5P-7530 [1] SEAL-O-RING  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 230-2621 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
21. 230-2633 C [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
22. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
23. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 6J-2245 [1] SEAL-O-RING  
25. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
26. 120-7413 Y [1] BASE GP-VALVE COVER  
27. 100-3878 [1] SPRING-INJECTOR  
28. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
29. 7E-6508 [1] CAP AS  
30. 0S-1590 [2] BOLT (3/8-16X2-IN)  
31. 154-6389 [3] BUTTON  
32. 230-2622 C [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160197
 

224-9869: VALVE MECHANISM GP

224-9869 VALVE MECHANISM GP
S/N 7RN1953-1959
i01969008 SEBP2416
2249869 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 117-9315 [1] SEAL  
2. 197-7004 [1] LIFTER AS-INJECTOR  
3. 230-2619 [1] SCREW-ADJUSTMENT (5/8-18X2.375-IN)  
4. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
5. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
6. 100-3880 [2] PUSHROD-VALVE  
7. 200-2003 [2] SCREW-ADJUSTMENT (1/2-20X2-IN)  
8. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
9. 7N-4782 [2] SPRING-LIFTER GUIDE  
10. 9S-1354 [1] NUT (5/8-18-THD)  
11. 100-3879 [1] PUSHROD-INJECTOR  
12. 230-2621 C [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
13. 230-2622 C [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
14. 230-2633 C [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
15. 230-3152 [1] BRIDGE (EXHAUST)  
16. 9F-7707 [3] RING-RETAINING  
17. 100-3877 [1] RETAINER-SPRING  
18. 5P-7530 [1] SEAL-O-RING  
19. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 230-3153 [1] BRIDGE (INLET)  
21. 230-7875 [2] LIFTER AS-VALVE  
22. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
23. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
24. 6J-2245 [1] SEAL-O-RING  
25. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)(VALVE MECHANISM)  
  124-0284 E TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG ASSEMBLY & WEDGE)
26. 120-7413 Y [1] BASE GP-VALVE COVER  
27. 100-3878 [1] SPRING-INJECTOR  
28. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
29. 7E-6508 [1] CAP AS  
30. 0S-1590 [2] BOLT (3/8-16X2-IN)  
31. 154-6389 [3] BUTTON  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160198
 

224-9869: VALVE MECHANISM GP

224-9869 VALVE MECHANISM GP
S/N 7RN1960-UP
i02198277 SEBP2416
2249869 VALVE MECHANISM GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-9196 [2] NUT-JAM (1/2-20-THD)  
2. 7E-6508 [1] CAP AS  
3. 7N-4782 [2] SPRING-LIFTER GUIDE  
4. 9F-7707 [3] RING-RETAINING  
5. 317-1121 [1] NUT-JAM (5/8-18-THD)  
6. 9X-0352 [1] RECEPTACLE AS-CONNECTOR (2-PIN)  
7. 100-3877 [1] RETAINER-SPRING  
8. 100-3878 [1] SPRING-INJECTOR  
9. 100-3879 [1] PUSHROD-INJECTOR  
10. 100-3880 [2] PUSHROD-VALVE  
11. 132-6469 [1] HARNESS AS-WIRING (VALVE MECHANISM)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  7E-6513 [1] CONNECTOR AS  
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  124-0284 E TUBE-HEAT SHRINK (3.2-MM DIA)(6-CM)  
12. 154-6389 [3] BUTTON  
13. 358-0768 [2] SCREW-ADJUSTING (1/2-20X2.42-IN)  
14. 380-4843 [1] SCREW-ADJUSTING (5/8-18X2.375-IN)  
15. 230-2621 [2] ROCKER ARM AS  
    (EACH INCLUDES)
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
16. 230-2633 [1] SHAFT AS (ROCKER ARM)  
  155-4094 [1] PIN-SPRING  
17. 240-7032 C [1] SEAL  
18. 247-8341 CY [1] BASE GP-VALVE COVER  
19. 416-8319 [2] LIFTER AS-VALVE  
20. 265-7537 [1] BRIDGE (INLET)  
21. 265-7538 [1] BRIDGE (EXHAUST)  
22. 281-6159 [1] ROCKER ARM AS  
  8N-7197 [1] SOCKET-ARM  
  230-2620 [1] BUSHING  
23. 282-7944 [1] LIFTER AS-INJECTOR  
24. 0L-2070 [2] BOLT (3/8-16X2.25-IN)  
25. 334-1626 [2] BOLT (3/8-16X2-IN)  
26. 0S-1615 [1] BOLT (1/4-20X0.75-IN)  
27. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
28. 5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
29. 5P-7530 [1] SEAL-O-RING  
30. 6J-2245 [1] SEAL-O-RING  
31. 8D-7942 [2] BOLT-12 POINT HEAD (5/8-11X6.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP24160199
 

124-5513: BREATHER GP

124-5513 BREATHER GP -CRANKCASE
i00111400 SEBP2416
1245513 BREATHER GP Parts scheme
  For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 272-0760 [4] SEAL-VALVE COVER (BREATHER)  
2. 4W-3027 [4] BREATHER AS (CRANKCASE)  
3. 217-6692 [2] HOSE-TEE  
4. 033-6031 [4] SEAL-O-RING  
5. 1A-9579 [15] BOLT (5/16-18X1.5-IN)  
6. 9M-1974 [15] WASHER-HARD (8.8X16X2-MM THK)  
7. 101-4199 [4] COVER AS  
8. 4W-3034 [4] CLAMP-HOSE  
9. 5P-0597 [4] CLAMP-HOSE  
10. 5P-4868 [2] CLAMP-HOSE  
11. 7N-7820 B [2] BOOT  
12. 1A-9579 B [1] BOLT (5/16-18X1.5-IN)  
13. 9M-1974 B [1] WASHER-HARD (8.8X16X2-MM THK)  
  B   USE AS REQUIRED
 

Information:

Engine News
New Valve Cover Seals Are Available For Mechanical Unit Injector (MUI) and Electronic Unit Injector (EUI) Engines {1107}
1996/09/23
New Valve Lash Adjusting Tool Group Released For All 3500 Engines{0600,1105,1121}
1998/05/01
New Valve Lash Adjusting Tool Group Released For All 3500 Engines {0600,1105,1121}
1998/09/01
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01
New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01
The Spring Seat Washer Is Now A Serviceable Component Of The Rocker Arm Cover Base Assembly {1102}
2000/11/01
Addition to Specifications "Valve Mechanism" {1123}
2005/02/28
New Cover Seals are Available {1107, 1201, 1210}
2002/11/01
New Maintenance Intervals for Valve Bridge and Valve Lash Adjustment {1102}
2003/01/01
A Pin for the Rocker Shaft Is Now Available for Parts Service {1102}
2003/08/01
New Rocker Arm Improves Lubrication {1123}
2004/04/01
New Cylinder Head Groups and Valve Mechanisms {1100, 1102, 1121, 1123}
2003/12/01
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
Engines Are Now Built with Semi-Crowned Lifter Rollers {1209}
2004/07/01
An Improved Rocker Arm Base and an Improved Seal for the Rocker Arm Base are Now Used {1123, 1123}
2004/09/01
Improved Lifters are Now Used {1102, 1121, 1123}
2005/01/31
New Sleeve Bearing in the Rocker Arm {1123}
2005/02/28
Improved Camshaft Lifters are Available {1209, 1290}
2007/03/12
A New Valve Lifter Assembly Is Used in 3500B and 3500C Engines {1209}
2012/10/30
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
Operation and Maintenance Manual
Engine Valve Lash - Inspect/Adjust
3500 and 3500B Engines
Camshaft Roller Followers - Inspect
3500 and 3500B Engines
Special Instruction
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Adjustment Of The Valve Lash And The Valve Bridge With The 147-5482 Valve Lash Gauge Group {1105, 1121}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Service Letter-NACD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Australia
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-CFEL
Service Letter-CSARL
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Americas
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Product Support Program For Inspecting And Replacing Cylinder Heads On Certain 3508, 3512, 3516, G3516 Engines And 777D Trucks
Service Letter-Brazil
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Technical Information Bulletin
Some Injector Wiring Harnesses for 3500 Engines Are Made with Incorrect Braiding {1290, 1408}
Some Injector Wiring Harnesses for 3500 Engines Are Made with Incorrect Braiding {1290, 1408}
Specifications
Fuel Injector Mechanism
3500B Engines
Valve Mechanism
3500B Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Service Letter-China
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Service Letter-Asia
Systems Operation
Valve Mechanism
3500B Engines
Fuel Injector Mechanism
3500B Engines
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Service Letter-APD
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Product Improvement Program For Inspecting And Replacing Damaged Fuel Injector O-rings On Certain 777C, 785B, 789B, And 793B Trucks; And 3512, 3512B, 3516, And 3516B Engines.
Testing and Adjusting
Finding the Top Center Position for the No. 1 Piston
3500B Engines
Valve Lash and Valve Bridge Adjustment
3500B Engines
Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B Engines
Disassembly and Assembly
Rocker Shaft - Disassemble
3500B Engines
Rocker Shaft - Assemble
3500B Engines
Rocker Shaft and Push Rods - Remove
3500B Engines
Rocker Shaft and Pushrod - Install
3500B Engines
Valve Cover - Remove and Install
3500B Engines
Valve Cover Base - Remove and Install
3500B Engines
Service Magazine
Quickly And Accurately Set Valve Lash{1105,0766}
1997/01/13
Use 147-5482 Valve Lash Gauge Group To Measure Valve Lash{0766}
1998/03/23
Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear {1103}
1998/11/23
Use 155-8795 Crankshaft Gauge To Determine Distortion {1202}
1998/11/23

Caterpillar Parts SIS Catalog 3516B :

VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF
SHAFT GP-STUB
7W-3629 SHAFT GP-STUB
SHAFT GP-AUXILIARY DRIVE
7N-8042 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3562 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3561 SHAFT GP-AUXILIARY DRIVE
SHAFT GP-AUXILIARY DRIVE
209-3560 SHAFT GP-AUXILIARY DRIVE
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
100-3905 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP
VALVE MECHANISM GP
224-9869 VALVE MECHANISM GP

Truck sale:

Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
 
500,000 
Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.
 
350,000 
Caterpillar 3516B, Stationary Generator Sets, Construction


Caterpillar 3516B
 
Caterpillar 3516B
- Industrial engines
RING POWER CORP.
Caterpillar 3516B
 
Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.