100-8774 PUMP GP-FUEL INJECTION FOR USE WITH EUI 3516B GEN SET ENGINE

FUEL SYSTEM

PUMP GP-FUEL INJECTION

0. 100-8774 PUMP GP-FU
1. 100-8774 PUMP GP-FU
2. 100-8774 PUMP GP-FU
3. 100-8774 PUMP GP-FU
4. 116-7010 PUMP GP-FU
5. 116-7010 PUMP GP-FU
6. 116-7010 PUMP GP-FU
7. 116-7010 PUMP GP-FU
8. 116-7010 PUMP GP-FU
9. 116-7010 PUMP GP-FU
0. INFORMATION

GEN SET ENGINE 3516B GEN SET ENGINE 6HN
3516B Generator Set Engine 6HN00001-UP SEBP2417 3516B 6HN (1995)

FUEL SYSTEM

PUMP GP-FUEL INJECTION

126-7992 INJECTOR GP-FUEL

132-0202 INJECTOR GP-FUEL

100-8774 PUMP GP-FUEL INJECTION

#SEBP24170460

100-8774: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

100-8774 PUMP GP-FUEL INJECTION
FOR USE WITH EUI

i00462274 SEBP2417

1008774 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	114-6469 Y	[1]	INJECTOR GP-FUEL
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP24170461

100-8774: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

100-8774 PUMP GP-FUEL INJECTION
S/N 6HN1-118
FOR USE WITH EUI

i00462275 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-7995 C	[1]	INJECTOR GP-FUEL
1A.	8J-8725	[1]	SEAL-O-RING
1B.	9X-7735	[1]	SEAL-O-RING
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24170462

100-8774: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

100-8774 PUMP GP-FUEL INJECTION
S/N 6HN119-383
FOR USE WITH EUI

i00462276 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	132-0204 C	[1]	INJECTOR GP-FUEL
1A.	8J-8725	[1]	SEAL-O-RING
1B.	9X-7735	[1]	SEAL-O-RING
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24170463

100-8774: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

100-8774 PUMP GP-FUEL INJECTION
S/N 6HN384-1719
FOR USE WITH EUI

i01155012 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	150-4456 C	[1]	INJECTOR GP-FUEL
1A.	194-9584	[1]	SEAL-O-RING
1B.	9X-7735	[1]	SEAL-O-RING
2.	234-4182	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24170464

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN1-380
Type 1
AN ATTACHMENT

i00488410 SEBP2417

1167010 PUMP GP-FUEL INJECTION Parts scheme

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	116-7534 Y	[1]	INJECTOR GP-FUEL
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP24170465

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN1-380
Type 2
AN ATTACHMENT

i00488415 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	126-7992 CY	[1]	INJECTOR GP-FUEL
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24170466

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN1-380
Type 3
AN ATTACHMENT

i00488420 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	132-0202 CY	[1]	INJECTOR GP-FUEL
2.	7C-2615	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP24170467

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN381-1719
AN ATTACHMENT

i01154122 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	162-8809 C	[1]	INJECTOR GP-FUEL
1A.	8J-8725	[1]	SEAL-O-RING
1B.	9X-7735	[1]	SEAL-O-RING
2.	234-4182	[1]	PLUG
3.	7E-2580	[1]	CLAMP-INJECTOR
4.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24170468

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN1720-UP
Type 1
AN ATTACHMENT

i02004086 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-2580	[1]	CLAMP-INJECTOR
2.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
3.	234-4182	[1]	PLUG
4.	250-1306 C	[1]	INJECTOR GP-FUEL
4A.	245-4907	[1]	SEAL-O-RING
4B.	245-4908	[1]	SEAL-O-RING
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

#SEBP24170469

116-7010: PUMP GP-FUEL INJECTION

PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION
S/N 6HN1720-UP
Type 2
AN ATTACHMENT

i05257316 SEBP2417

For full view, you need register

Parts for your 3516B GEN SET ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7E-2580	[1]	CLAMP-INJECTOR
2.	7N-5487	[1]	WASHER (12X22X9.5-MM THK)
3.	234-4182	[1]	PLUG
4.	386-1758 C	[1]	INJECTOR GP-FUEL
4A.	245-4907	[1]	SEAL-O-RING
4B.	245-4908	[1]	SEAL-O-RING
5.	7F-8698	[1]	BOLT (7/16-14X3.5-IN)
	C		CHANGE FROM PREVIOUS TYPE
	R		REMANUFACTURED PART MAY BE AVAILABLE

Information:

FUEL SYSTEM

PUMP GP-FUEL INJECTION

Engine News

New Valve Cover Seals Are Available For Mechanical Unit Injector (MUI) and Electronic Unit Injector (EUI) Engines {1107}
1996/09/23

Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23

"E-Trim" Unit Fuel Injectors{1290}
1996/11/01

Do NOT Interchange Electrical Stators Between Electronic Unit Injectors (EUIs) {1290}
1998/05/01

Non-E-Trim Unit Injectors No Longer Produced For 3500B Engines {1290}
1998/09/01

Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01

Tightening Torque Increased For Nuts In Fuel Injector Wiring Harness Cap Assembly{1408}
1999/09/01

Be Sure To Tighten The Locknut For The Adjusting Screw For The Fuel Injector Rocker Arm To The Correct Torque {1290}
2001/05/01

Addition to Specifications "Valve Mechanism" {1123}
2003/01/01

Correct Lash Setting for the Fuel Injector {1290}
2003/10/01

A New Fuel Injector Reduces the Amount of Soot in the Engine Oil {1251, 1254, 1290, 1713}
2004/10/01

Improved Fuel Injectors {1251, 1254, 1290}
2004/09/01

New Injector Seals are Now Used {1290}
2005/01/31

Service Life of Unit Injectors {1251, 1290}
2007/01/01

Do not Use the 6V-4022 Fuel Injector Tester to Check Unit Injectors for Leaks {0782, 1251, 1254, 1290, 1713}
2008/11/24

New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
2012/12/21

Operation and Maintenance Manual

Fuel Injector - Inspect/Adjust
3500 and 3500B Engines

Special Instruction

Performing a Multiple Cylinder Cutout Test {1290}
Performing a Multiple Cylinder Cutout Test {1290}

Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}
Worksheet for the Diagnosis of Fuel Injectors{1254, 1290}

Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}

Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}

Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}

Service Letter-NACD

The Torque Of The Injector Electronic Solenoid Valve Needs To Be Checked On Certain D11R Track-Type Tractors; 776D, 777D, 785C, And 793C Off Highway Trucks; 3508B, 3512, 3512B, 3516, And 3516B Engines
The Torque Of The Injector Electronic Solenoid Valve Needs To Be Checked On Certain D11R Track-Type Tractors; 776D, 777D, 785C, And 793C Off Highway Trucks; 3508B, 3512, 3512B, 3516, And 3516B Engines

Service Letter-Australia

Service Letter-CFEL

Service Letter-CSARL

Service Letter-Americas

Technical Information Bulletin

Fuel Dilution Of The Oil In 3500B Engines
Fuel Dilution Of The Oil In 3500B Engines

Specifications

Fuel Injector Mechanism
3500B Engines

Fuel Injector
3500B Engines

Service Letter-China

Service Letter-Asia

Systems Operation

Fuel Injector
3500B Engines

Information Release Memo

CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS
CAT REMAN ANNOUNCES AN APPEARANCE CHANGE TO CERTAIN 3406 AND 3500 ELECTRONIC UNIT INJECTORS

APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS

APPEARANCE CHANGE TO CAT� REMAN ELECTRONIC INJECTORS
APPEARANCE CHANGE TO CAT� REMAN ELECTRONIC INJECTORS

Service Letter-APD

Testing and Adjusting

Checking Engine Cylinders with an Electronic Service Tool
3500B Engines

Fuel Injector Adjustment
3500B Engines

Crankshaft Position for Fuel Injector Adjustment and Valve Lash Setting
3500B Engines

Checking Engine Cylinders
3500B Engines

Troubleshooting

MID 036 - CID 0001 - FMI 05 Injector Cylinder 1 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0001 - FMI 06 Injector Cylinder 1 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0002 - FMI 05 Injector Cylinder 2 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0002 - FMI 06 Injector Cylinder 2 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0003 - FMI 05 Injector Cylinder 3 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0003 - FMI 06 Injector Cylinder 3 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0004 - FMI 05 Injector Cylinder 4 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0004 - FMI 06 Injector Cylinder 4 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0005 - FMI 05 Injector Cylinder 5 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0005 - FMI 06 Injector Cylinder 5 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0006 - FMI 05 Injector Cylinder 6 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0006 - FMI 06 Injector Cylinder 6 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0007 - FMI 05 Injector Cylinder 7 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0007 - FMI 06 Injector Cylinder 7 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0008 - FMI 05 Injector Cylinder 8 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0008 - FMI 06 Injector Cylinder 8 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0009 - FMI 06 Injector Cylinder 9 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0013 - FMI 05 Injector Cylinder 13 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0013 - FMI 06 Injector Cylinder 13 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0014 - FMI 05 Injector Cylinder 14 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0014 - FMI 06 Injector Cylinder 14 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0015 - FMI 06 Injector Cylinder 15 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0015 - FMI 05 Injector Cylinder 15 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0016 - FMI 06 Injector Cylinder 16 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0016 - FMI 05 Injector Cylinder 16 open circuit
3500B Engines and 3500 Engines with EUI Option

Injector Solenoids
3500B Engines and 3500 Engines with EUI Option

Noise Coming from Cylinder
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0009 - FMI 05 Injector Cylinder 9 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0010 - FMI 05 Injector Cylinder 10 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0010 - FMI 06 Injector Cylinder 10 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0011 - FMI 05 Injector Cylinder 11 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0011 - FMI 06 Injector Cylinder 11 short
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0012 - FMI 05 Injector Cylinder 12 open circuit
3500B Engines and 3500 Engines with EUI Option

MID 036 - CID 0012 - FMI 06 Injector Cylinder 12 short
3500B Engines and 3500 Engines with EUI Option

Disassembly and Assembly

Electronic Unit Injector - Install
3500B Engines

Electronic Unit Injector - Remove
3500B Engines

Service Magazine

Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3516B :

156-9756 MANIFOLD GP-FUEL

156-9755 MANIFOLD GP-FUEL

128-5985 LINES GP-FUEL INJECTION

115-0742 LINES GP-FUEL INJECTION

122-1687 LINES GP-FUEL

5N-2438 LINES GP-FLEXIBLE FUEL

132-0202 INJECTOR GP-FUEL

126-7992 INJECTOR GP-FUEL

100-8774 PUMP GP-FUEL INJECTION

116-7010 PUMP GP-FUEL INJECTION

Truck sale:

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.

500,000

Caterpillar 3516B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FINNING CHILE S.A.

350,000

Caterpillar 3516B, Stationary Generator Sets, Construction

Caterpillar 3516B
- Industrial engines
RING POWER CORP.

Caterpillar 3516B
- Stationary Generator Sets
RING POWER CORP.